SEARCH · Engineering Papers

Results for “TRAJECTORIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

NASA NTRS1988

Near-nucleus trajectory design for Comet Penetrator-Lander data relay

A Comet Penetrator-Lander is included in the payload of the Comet Rendezvous Asteroid Flyby spacecraft; it will be deployed from an orbit about the comet nucleus and will implant itself in the nucleus at a pre-selected site. Throughout the following 9 days, the orbiting spacecraft must be in position to receive transmissions from the Penetrator-Lander at specified intervals. Using conic orbits and a simplified model of the nucleus, several types of trajectories have been identified which will allow the data relay requirements to be met. These are sensitive to the mass and rotational properties of the comet nucleus and to the latitude of the Penetrator-Lander impact site; no single orbital strategy can cover the entire range of possibilities. Frequent spacecraft maneuvers would provide more flexibility, but would result in a much more complicated mission scenario. More accurate modeling of the comet nucleus and the orbiter trajectories will refine the relay orbit options presented here.

Stetson, Douglas↗

NASA NTRS1988

A comparison between onestep and other multiconic trajectory propagation methods

The paper presents an optimized version of the one-step multiconic method of spacecraft trajectory propagation in the presence of two attracting bodies. This method is compared to eleven other methods ranging from simple conic propagation to full integration of the equations of motion by applying the methods to a wide variety of test cases taken from planned space missions. This optimize one-step method is shown to be an order of magnitude better than other single-step methods for interplanetary and most lunar trajectories. Multistep multiconics methods and integration of the state offer another order of magnitude improvement, but at a proportionally higher cost and calculation time.

Kiedron, Krystyna↗

NASA NTRS1988

Trajectory optimization and guidance law development for national aerospace plane applications

The problem of onboard trajectory optimization for an airbreathing, single-stage-to-orbit vehicle is examined. A simple model representative of the aerospace plane concept, including a dual-mode propulsion system composed of scramjet and rocket engines, is presented. Consideration is restricted to hypersonic flight within the atmosphere. An energy state approximation is used in a four-state model for flight of a point mass in a vertical plane. Trajectory constraints, including those of dynamic pressure and aerodynamic heating, are initially ignored. Singular perturbation methods are applied in solving the optimal control problem of minimum fuel climb. The resulting reduced solution for the energy state dynamics provides an optimal altitude profile dependent on energy level and control for rocket thrust. A boundary-layer analysis produces an approximate lift control solution in feedback form and accounts for altitude and flight path angle dynamics. The reduced solution optimal climb path is presented for the unconstrained case and the case for which a maximum dynamic pressure constraint is enforced.

Calise, A. J.↗

NASA NTRS1989

Optimizing Simulated Trajectories Of Rigid Bodies

6D POST is general-purpose, six-degree-of-freedom computer program for optimization of simulated trajectories of rigid bodies. Direct extension of three-degree-of-freedom POST program. 6D POST program models trajectory of powered or unpowered vehicle operating at or near rotating planet. Used to solve variety of performance, guidance, and flight-control problems for atmospheric and orbital vehicles. Written in FORTRAN 77 and FORTRAN V.

Brauer, Garry L.↗

NASA NTRS1989

Computing Optimal Multiarc Trajectories

Optimal Multi-Arc Trajectories (OMAT) computer program designed to calculate solution to optimal-trajectory problem in cases of low thrust-to-weight ratios. Developed for two-body exoatmospheric problem with three degrees of freedom in inverse-square force field. Offers two different options: impulsive changes in velocity and finite burns with low thrust-to-weight ratios. Two distinct solutions available from program: optimal multi-impulse (OMI) solution and optimal multiburn (OMB) solution. Two solutions obtained separately, or results of OMI solution used to guess unknown parameters of OMB solution. Written for DEC VAX-series computer. Written completely in FORTRAN 77.

Jezewski, Donald J.↗

NASA NTRS1988

Confined turbulent fluid-particle flow modeling using multiple-realization particle trajectory schemes

A multiple-realization particle trajectory scheme has been developed and applied to the numerical prediction of confined turbulent fluid-particle flows. The example flows investigated include the vertical pipe upflow experimental data of Tsuji et al. and the experimental data of Leavitt for a coaxial jet flow, comprising a particle-laden central jet and a clean annular jet, into a large recirculation chamber. The results obtained from the numerical scheme agree well with the experimental data, lending confidence to the modeling approach. The multiple-realization particle trajectory turbulent flow modeling scheme is believed to be a more elegant and accurate approach to the extension of single-particle hydrodynamics to dilute multi-particle systems than the more commonly employed two-fluid modeling approach. It is also better able to incorporate additional force items such as lift, virtual mass and Bassett history terms directly into the particle equation of motion as appropriate. This makes it a suitable candidate for particle migration studies and an extension to situations involving liquid particulate phases with possible propulsion applications, such as in spray combustion, follows naturally.

Adeniji-Fashola, A. A.↗

NASA NTRS1988

Low launch-energy trajectories to the outer solar system via Venus and earth gravity-assist flybys

Recent cancellation of the program to develop a Centaur upper stage for use in the Space Transportation System (STS) has motivated considerable interest in trajectory modes with low launch-energy requirements to the outer solar system. Flyby encounters of the inner planets, especially Venus and earth, may be used to enable missions to Jupiter, Saturn, and a restricted class of comets. An examination of mission opportunities to these targets is presented through the end of this century using gravity-assist trajectories.

Diehl, Roger↗

NASA NTRS1988

Some notes on applying the one-step multiconic method of trajectory propagation

The one-step multiconic method (also called the pseudostate method) has been known for years to offer up to an order of magnitude of improvement over the patched-conic method for propagating trajectories under the gravitational influence of two bodies. In these notes, the method and some of its variations are described. Then, a crucial parameter of this method, the sweepback duration, is examined, and it is shown that the traditional wisdom concerning this parameter should be replaced by an algorithm which relates it to the trajectory characteristics. Remarkably, this algorithm is independent of the masses of the primary and secondary bodies.

Sweetser, Theodore H., III↗

NASA NTRS1988

On air motion trajectories in cold fronts

This paper examines air parcel trajectories in the two-dimensional model for a cold front by Reeder and Smith (1987). These are found to be in close agreement with trajectories deduced from analyses of summertime 'cool changes' in southeastern Australia, adding further support to the applicability of the numerical model to this kind of cold front. The favorable comparison points also to the dynamical consistency of the conceptual model for the cool change, which has evolved from the analysis of data from observational experiments.

Reeder, Michael J.↗

NASA NTRS1988

Trajectories for the Sakigake extended-mission phase

The trajectory profile that will be used by Japan's Sakigake spacecraft to accomplish its extended-mission objectives is described. Currently, Sakigake is following a heliocentric trajectory that will return to the earth's vicinity in January 1992. Four earth gravity-assist maneuvers are planned to redirect Sakigake to an encounter with Comet Honda-Mrkos-Pajdusakova (HMP) in February 1996. While carrying out the earth-swingby maneuvers, the spacecraft will make several passes through previously unexplored regions of the distant geomagnetic tail.

Farquhar, R.↗

NASA NTRS1989

Optimal trajectories for hypervelocity flight

Optimal trajectories for hypervelocity flight of interest in aeroassisted orbital transfer are discussed. Both coplanar and noncoplanar transfer are studied. More precisely, the geosynchronous-earth-orbit-, high-earth orbit- and low-earth-orbit-to-low earth-orbit transfers are considered in connection with a spacecraft that is controlled during the atmospheric pass by the angle of attack (coplanar case) or by the angle of attack and the angle of bank (noncoplanar case). Within the framework of classical optimal control, the following problems are studied: minimize the energy required for orbital transfer; maximize the time of flight during the atmospheric portion of the trajectory; and minimize the time integral of the square of the path inclination. Within the framework of minimax optimal control, the problem studied is to minimize the peak rate. Numerical solutions for the problems are obtained by means of the sequential gradient-restoration algorithm. The engineering implications of the results are discussed.

Miele, A.↗

NASA NTRS1990

Graphical Display Of Test-Flight Trajectories

Trajectories displayed directly on maps. Computer graphical system shows trajectories of experimental aircraft in real time during flight tests. Enables operator to choose variety of display modes and to issue course corrections to pilot. Principle of system adapted to variety of civil, military, and commercial uses in which paths of vehicles overlaid on maps - for example, in dispatching delivery vans.

Comperini, Robert G.↗

NASA NTRS1989

Shuttle tethered operations: The effect on orbital trajectory and inertial navigation

The first full scale test of a large tethered satellite system is planned. The Orbiter will be linked to a 500 kg payload by a 20 km tether, an action with a profound effect on the trajectory of the Orbiter. For the first time in the history of the Shuttle program, the vehicle will conduct prolonged operations with the center of mass of the orbiting system a significant distance from the center of mass of the Space Shuttle Orbiter, a violation of the fundamental assumption made in both the Orbiter ground-based and onboard navigation software. Inertial navigation of tethered operations with the Shuttle is further complicated by the presence of non-conservative forces in the system: Reaction Control System (RCS) translational effects, atmospheric drag, and electro-magnetic dynamics. These can couple with the conservative tether dynamics effects, and degrade the navigation software performance. The primary effects are examined on the Orbiter's trajectory, coupling by conservative forces during tethered operations, and the impact of both on the ability to meet inertial navigation constraints. The impact of electrodynamics, different RCS control modes, commanded attitudes, and attitude deadbands are presented. Operational guidelines which optimize successful mission navigation, and necessary navigation constraints are discussed.

Lardas, Mark N.↗

NASA NTRS1989

The controllability of the aeroassist flight experiment atmospheric skip trajectory

The Aeroassist Flight Experiment (AFE) will be the first vehicle to simulate a return from geosynchronous orbit, deplete energy during an aerobraking maneuver, and navigate back out of the atmosphere to a low earth orbit It will gather scientific data necessary for future Aeroasisted Orbitl Transfer Vehicles (AOTV's). Critical to mission success is the ability of the atmospheric guidance to accurately attain a targeted post-aeropass orbital apogee while nulling inclination errors and compensating for dispersions in state, aerodynamic, and atmospheric parameters. In typing to satisfy mission constraints, atmospheric entry-interface (EI) conditions, guidance gains, and trajectory. The results of the investigation are presented; emphasizing the adverse effects of dispersed atmospheres on trajectory controllability.

Wood, R.↗

NASA NTRS1989

Optimal trajectories for the aeroassisted flight experiment

The determination of optimal trajectories for the aeroassisted flight experiment (AFE) is discussed. The intent of this experiment is to simulate a GEO-to-LEO transfer, where GEO denotes a geosynchronous earth orbit and LEO denotes a low earth orbit. The trajectories of an AFE spacecraft are analyzed in a 3D-space, employing the full system of 6 ordinary differential equations (ODEs) describing the atmospheric pass. The atmospheric entry conditions are given, and the atmospheric exit conditions are adjusted. Two possible transfers are considered: (1) indirect ascent to a 178 NM perigee via a 197 NM apogee; and (2) direct ascent to a 178 NM apogee.

Miele, A.↗

NASA NTRS1989

Optimal trajectories for the aeroassisted flight experiment. Part 3: Formulation, results, and analysis

The determination of optimal trajectories for the aero-assisted flight experiment (AFE) is investigated. The intent of this experiment is to simulate a GEO-to-LEO transfer, where GEO denotes a geosynchronous Earth orbit and LEO denotes a low Earth orbit. The trajectories of an AFE spacecraft are analyzed in a 3D-space, employing the full system of 6 ODEs describing the atmospheric pass. The atmospheric entry conditions are given, and the atmospheric exit conditions are adjusted in such a way that the following conditions are satisfied: (1) the atmospheric velocity depletion is such that, after exiting, the AFE spacecraft first ascends to a specified apogee and then descends to a specified perigee; and (2) the exit orbital plane is identical with the entry orbital plane. The final maneuver, not analyzed here, includes the rendezvous with and the capture by the space shuttle.

Miele, A.↗

NASA NTRS1990

The vibro-acoustic mapping of low gravity trajectories on a Learjet aircraft

Terrestrial low gravity research techniques have been employed to gain a more thorough understanding of basic science and technology concepts. One technique frequently used involves flying parabolic trajectories aboard the NASA Lewis Research Center Learjet aircraft. A measurement program was developed to support an isolation system conceptual design. This program primarily was intended to measure time correlated high frequency accelerations (up to 100 Hz) present at various locations throughout the Learjet during a series of trajectories and flights. As suspected, the measurements obtained revealed that the environment aboard such an aircraft can not simply be described in terms of the static level low gravity g vector obtained, but that it also must account for both rigid body and high frequency vibro-acoustic dynamics.

Grodsinsky, C. M.↗

NASA NTRS1989

Optimization and guidance of flight trajectories in the presence of windshear

Research on the optimization and guidance of flight trajectories in the presence of windshear performed in the period 1984 to 1989 is discussed. The research concerns windshear recovery systems and covers two major areas of investigation: optimal trajectories for takeoff, abort landing, and penetration landing; and guidance schemes for takeoff, abort landing, and penetration landing.

Miele, A.↗