Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surfaced Polymers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

The effect of simulated low earth orbit radiation on polyimides (UV degradation study)

UV degradation of polyimide films in air and vacuum were studied using UV-visible, ESR, FTIR, and XPS spectroscopies. The UV-visible spectra of polyimide films showed a blue shift in the absorption compared to Kapton. This behavior was attributed to the presence of bulky groups and kinks along the polymer chains which disrupt the formation of a charge transfer complex. The UV-visible spectra showed also that UV irradiation of polyimides result extensively in surface degradation, leaving the bulk of the polymer intact. ESR spectra of polyimides irradiated in vacuum revealed the formation of stable carbon-centered radicals which give a singlet ESR spectrum, while polyimides irradiated in air produced an asymmetric signal shifted to a lower magnetic field, with a higher g value and line width. This signal was attributed to oxygen-cenetered radicals of peroxy and/or alkoxy type. The rate of radical formation in air was two fold higher than for vacuum irradiation, and reached a plateau after a short time. This suggests a continuous depletion of radicals on the surface via an ablative degradation process. FTIR, XPS, and weight loss studies supported this postulate. An XPS study of the surface indicated a substantial increase in the surface oxidation after irradiation in air. The sharp increase in the C-O binding energy peak relative to the C-C peak was believed to be associated with an aromatic ring opening reaction.

Forsythe, John S.↗

Template-directed oligonucleotide ligation on hydroxylapatite

It has been suggested that the prebiotic synthesis of the precursors of biopolymers could have occurred on a solid surface such as that provided by clay or some other mineral. One such scheme envisages that growing polymers were localized by adsorption to a mineral surface where an activating agent or activated monomers were supplied continuously or cyclically. Here, it is reported that a sequence of reactions in which initially formed oligo(G)s are reactivated by conversion to phosphorimidazolides in the presence of poly(C) and then allowed to ligate is ideal, in that repeated cycles can be carried out on the surface of hydroxylapatite, whereas in the liquid phase the cycle could be achieved only with considerable difficulty.

Acevedo, O. L.↗

Coated particles for lithium battery cathodes

Particles of cathodic materials are coated with polymer to prevent direct contact between the particles and the surrounding electrolyte. The polymers are held in place either by a) growing the polymers from initiators covalently bound to the particle, b) attachment of the already-formed polymers by covalently linking to functional groups attached to the particle, or c) electrostatic interactions resulting from incorporation of cationic or anionic groups in the polymer chain. Carbon or ceramic coatings may first be formed on the surfaces of the particles before the particles are coated with polymer. The polymer coating is both electronically and ionically conductive.

25 ENERGY STORAGE↗

Role of conductive binder to direct solid–electrolyte interphase formation over silicon anodes

In this study, with the use of in situ neutron reflectometry (NR) we show how the addition of an electronically conductive polymeric binder, PEFM, mediates the solid–electrolyte interphase (SEI) formation and composition on an amorphous Si (a-Si) electrode as a function of the state-of-charge. Upon initial contact with the electrolyte a Li rich, 41 Å thick, layer forms on the surface of the anode below the polymer layer. At 0.8 V (vs. Li/Li + ), a distinct SEI layer forms from the incorporation of electrolyte decomposition products in the reaction layer that is organic in nature. In addition, solvent uptake in the PEFM layer occurs resulting in the layer swelling to ~200 Å. Upon further polarization to 0.4 and 0.15 V (vs. Li/Li + ) a thick layer (800 Å) on the surface of the Si is evident where a diffuse interface between the PEFM and SEI occurs resulting in a matrix between the two layers, as the binder has taken up a large amount of electrolyte. The two layers appear to be interchanging solvent molecules from the PEFM to the SEI to the Si surface preventing the lithiation of the a-Si. By 0.05 V (vs. Li/Li + ) a Li rich, 72 Å thick, SEI layer condenses on the surface of the anode, and a 121 Å intermixed layer on top of the SEI with LiF and Li–C–O species is present with the rest blended into the electrolyte.

36 MATERIALS SCIENCE↗

Atmospheric pressure plasma - $\mathrm{ARGET}$ $\mathrm{ATRP}$ modification of poly(ether sulfone) membranes: A combination attack

We report a novel surface modification technique for grafting alkyl methacrylate monomers from commercial poly(ether sulfone) (PES) nanofiltration membranes is developed through a combination of helium and oxygen atmospheric pressure plasma treatment followed by Activators Regenerated by Electron Transfer (ARGET) Atom Transfer Radical Polymerization (ATRP). The resulting membrane surfaces show degree of grafting increases of 28%, 94%, and 270% for methyl methacrylate (C1), hexyl methacrylate (C6), and stearyl methacrylate (C18), respectively, when characterized with Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy. Scanning Electron Microscopy and Atomic Force Microscopy (AFM) show a rippled, fibrous morphology for the PES membranes grafted with C18 and reinforced through molecular dynamics simulations. AFM of the PES membranes grafted with C18 show an increase of ~ 23% in root-mean square (RMS) roughness as well as 4x higher adhesion force when probed with a hydrophobic gold cantilever tip when compared with the unmodified PES membranes, confirming a successful surface grafting reaction and increase in surface hydrophobicity, respectively. This technique allows enhanced synthesis of polymer grafted membranes using relatively green reaction solvent and enables “structure-by-design” surface morphology control with future applications in membrane separation processes such as organic solvent nanofiltration, gas separations, and desalination.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Defect-Free MOF-Based Mixed Matrix Membranes Obtained by Corona Crosslinking

Functionalized UiO-66 MOF particles were covalently grafted with hydride-terminated polydimethylsiloxane (PDMS) via postsynthetic modification (PSM). These PDMS-coated MOF particles (termed here ‘corona-MOF’) were used in the preparation of mixed- matrix membranes (MMMs). Defect-free MMMs with weight loadings of 50% were achieved with corona-MOF particles, attributed to the improved dispersibility of the corona-MOF particles and covalent linkages between the corona-MOF particles and the polymer matrix. The PDMS MMMs showed distinct separation features in a single-gas permeation test, displaying much higher CO 2 gas permeation with no decrease in selectivity when compared to MMMs prepared with unmodified UiO-66 particles. Single gas separation tests with CO 2 , N 2 , and propane were performed to probe the separation mechanism of the corona-MOF MMMs, demonstrating that these MMM avoid non-ideal “sieve-in-a-cage” and “plugged sieves” scenarios. Additionally, due to covalent bond formation between both the MOF and the polymer matrix in corona-MOF MMMs, particle aggregation is negligible during film curing, allowing for the formation of flexible, self-standing MMMs of <1 μm in thickness. Low quantities of polymer covalently attached to the MOF surface (<5 wt%) is sufficient to fabricate thin, defect-free, high MOF loading MMMs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interfacial nucleation behavior of inkjet-printed 6,13 bis(tri-isopropylsilylethynyl) pentacene on dielectric surfaces

The performance of organic thin film transistors (OTFTs) is heavily dependent on the interface property between the organic semiconductor and the dielectric substrate. Device fabrication with bottom-gate architecture by depositing the semiconductors with a solution method is highly recommended for cost-effectiveness. Surface modification of the dielectric layer is employed as an effective approach to control film growth. Here, we perform surface modification via a self-assembled monolayer of silanes, a spin-coated polymer layer or UV-ozone cleaning, to prepare surfaces with different surface polarities and morphologies. The semiconductor is inkjet-printed on the surface-treated substrates as single-line films with overlapping drop assignment. Surface morphologies of the dielectric before film deposition and film morphologies of the inkjet-printed semiconductor are characterized with polarized microscopy and AFM. Electrical properties of the films are studied through organic thin-film transistors with bottom-gate/bottom-contact structure. With reduced surface polarity and nanoscale aggregation of silane molecules on the substrates, semiconductor nucleates from the interior interface between the ink solution and the substrate, which contributes to film growth with higher crystal coverage and better film quality at the interface. Surface treatment with hydrophobic silanes is a promising approach to fabrication of high performance OTFTs with nonpolar conjugated molecules via solution methods.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surface Monitoring of CFRP Structures for Adhesive Bonding

Adhesive bonding of composite materials requires reliable monitoring and detection of surface contaminants to assure robust and durable bonded structures. Surface treatment and effective monitoring prior to bonding is essential in order to obtain a surface free from contaminants that may degrade structural performance. Two techniques which monitor the effectiveness of the laser surface treatment of carbon fiber reinforced polymer (CFRP) materials are being investigated: laser induced breakdown spectroscopy (LIBS) and optically stimulated electron emission (OSEE). The applicability of LIBS to detect silicone contaminants on CFRP composites is studied using ~35 ns Nd:YAG laser pulses at 355 nm with a pulse energy of 45 mJ. The LIBS regime in which pulse energies are < 100 mJ is referred to as mLIBS. CFRP surfaces were contaminated with polydimethylsiloxane (PDMS), a major component of silicone based mold release agents. The presence of PDMS is found by inspecting the Si I emission line at 288.2 nm. Untreated CFRP samples and CFRP contaminated with PDMS were tested. The PDMS areal density ranged from 0.36 Â+/- 0.04 to 0.51 Â+/- 0.16 mg/cm2. The results demonstrate the successful detection of PDMS on CFRP using mLIBS. In addition, OSEE was used to measure CFRP surface cleanliness pre- and post-treatment by laser ablation on specimens contaminated with PDMS coatings from 8 nm to 1311 nm in thickness. The results showed a significant increase in the OSEE photocurrent after laser surface treatment.

Ledesma, Rodolfo↗

Design Principles for Using Amphiphilic Polymers To Create Microporous Water

Aqueous dispersions of microporous nanocrystals with dry, gas-accessible pores—referred to as “microporous water”—enable high densities of gas molecules to be transported through water. For many applications of microporous water, generalizable strategies are required to functionalize the external surface of microporous particles to control their dispersibility, stability, and interactions with other solution-phase components—including catalysts, proteins, and cells—while retaining as much of their internal pore volume as possible. Here, in this work, we establish design principles for the noncovalent surface functionalization of hydrophobic metal–organic frameworks with amphiphilic polymers that render the particles dispersible in water and enhance their hydrolytic stability. Specifically, we show that block co-polymers with persistence lengths that exceed the micropore aperture size of zeolitic imidazolate frameworks (ZIFs) can dramatically enhance ZIF particle dispersibility and stability while preserving porosity and >80% of the theoretical O 2 carrying capacity. Moreover, enhancements in hydrolytic stability are greatest when the polymer can form strong bonds to exposed metal sites on the external particle surface. More broadly, our insights provide guidelines for controlling the interface between polymers and metal–organic framework particles in aqueous environments to augment the properties of microporous water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical Property Evaluation of Next Generation Thermal Control Coatings

Next generation white thermal control coatings were developed via the Small Business Innovative Research program utilizing lithium silicate chemistry as a binder. Doping of the binder with additives yielded a powder that was plasma spray capable and that could be applied to light weight polymers and carbon-carbon composite surfaces. The plasma sprayed coating had acceptable beginning-of-life and end-of-live optical properties, as indicated by a successful 1.5 year exposure to the space environment in low Earth orbit. Recent studies also showed the coating to be durable to simulated space environments consisting of 1 keV and 10 keV electrons, 4.5 MeV electrons, and thermal cycling. Large scale deposition was demonstrated on a polymer matrix composite radiator panel, leading to the selection of the coating for use on the Gravity Recovery And Interior Laboratory (GRAIL) mission.

Jaworske, Donald A.↗

A Comparison of Emerging and Industry Benchmark Photovoltaic Backsheets Between Different Outdoor Locations

Recent interest within the photovoltaic (PV) module industry is largely directed toward enhanced lifetimes in the field, balanced with improved recyclability. Traditionally, fluoropolymer-based backsheets have been used, however, are difficult to recycle. Emerging polyolefin (PO)-based backsheets are more recyclable and can be formulated to be robust. Properties of different fluoropolymer- and non-fluoropolymer-based backsheet coupons and in encapsulated silicon mini modules that have been fielded in Albuquerque, NM and Cocoa, FL are reported here. Seven backsheets were examined: two novel PO's, TPT, APO, PPE, AAA, and KPf. Methods of examination include module electrical performance (I - V flash test), surface morphology (optical microscope and gloss), polymer chemical structure (FTIR), EL imaging, mechanical tensile testing, DC breakdown voltage, DSC (phase transitions), and optical performance (reflectance spectra).

industries↗

Rational Design of Novel Biomimetic Sequence-Defined Polymers for Mineralization Applications

Silica biomineralization is a naturally occurring process, wherein organisms use proteins and other biological structures to direct the formation of complex, hierarchical nanostructures. Discovery and characterization of such proteins and their underlying mechanisms spurred significant efforts to identify routes for biomimetic mineralization that reproduce the exquisite shapes and size selectivities found in nature. A common strategy has been the use of short peptide sequences with chemistry mimicking those found in natural systems, such as the use of the silaffin-derived R5 peptide. While progress has been made using this approach, there are many limitations that have prevented breakthroughs in biomimicry. To advance our ability to use charged macromolecules for silica formation, we propose to use sequence-defined synthetic polymers known as peptoids, or N-substituted polyglycines, which present significant capability for the precise tuning of sequence and structure beyond what can often be achieved with peptides alone. This study presents a computationally predicted design of these polymers that leads to the controlled formation of silica nanomaterials. We investigate surface adsorption and the mineralization process through analysis of binding mechanisms and energetics of the R5 system. Next, we synthesized two R5-inspired peptoids and validated our prediction in the design of mineralization polymers through characterization using surface plasmon resonance and electron microscopy. Here, this computationally guided study holds great promise for designing new sequences with unprecedented control of the placement of chemical functional groups, thus allowing for further unraveling of silicification mechanisms and the eventual design of sequence-defined synthetic polymers leading to the predictive synthesis of nanostructured functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A diffusion–deformation model with damage for polymer undergoing rapid decompression failure

Green hydrogen is emerging as one of the most promising alternatives to replace fossil fuels. While hydrogen gas has a good energy density by weight, its poor energy density by volume requires it to be stored under high pressure for commercial use. The hydrogen infrastructure developed to handle this high pressure hydrogen contains multiple components made of polymers as sealing agents. Although polymers do not react chemically with hydrogen gas, they undergo a mechanical failure when high pressure hydrogen gas is suddenly depressurized. This phenomenon known as 'rapid decompression failure' occurs due to the diffusion of hydrogen through polymer and getting trapped inside pre-existing cavities or voids. Here, in this paper, a continuum mechanics-based coupled diffusion-deformation-damage model was developed to predict the hydrogen distribution, stress distribution, and damage propagation inside the polymer while it undergoes rapid decompression failure. The polymer was modeled as a hyperelastic material because it represents the nonlinear material response observed in uniaxial tensile tests perfectly. The effects of hydrogen diffusivity, pre-existing cavity size, cavity location, applied hydrogen pressure, and depressurization rate on damage initiation were studied. It was found that the coefficient of diffusion plays an important role in damage initiation and damage was mostly concentrated in the inside areas rather than near the surface. Experiments were conducted with EPDM polymer which agreed well with the predicted trends using the given model. The effect of adding carbon black and silica filler particles and plasticizer to the pure EPDM polymer was also studied. It was found that damage during RDF decreases with the addition of fillers, but increases with the addition of the plasticizer. Finally, the damage evolution in the presence of two cavities was also studied, and was found that the interaction of stress fields around the cavities alters the damage occurring during RDF.

36 MATERIALS SCIENCE↗

Accelerated Sequence Design of Star Block Copolymers: An Unbiased Exploration Strategy via Fusion of Molecular Dynamics Simulations and Machine Learning

Star block copolymers (s-BCPs) have potential applications as novel surfactants or amphiphiles for emulsification, compatibilization, chemical transformations, and separations. s-BCPs have chain architectures where three or more linear diblock copolymer arms comprised of two chemically distinct linear polymers, e.g., solvophobic and solvophilic chains, are covalently joined at one point. The chemical composition of each of the subunit polymer chains comprising the arms, their molecular weights, and the number of arms can be varied to tailor the surface and interfacial activity of these architecturally unique molecules. Further, this makes identification of the optimal s-BCP design nontrivial as the total number of plausible s-BCP architectures is experimentally or computationally intractable. In this work, we use molecular dynamics (MD) simulations coupled with a reinforcement learning-based Monte Carlo tree search (MCTS) to identify s-BCP designs that minimize the interfacial tension between polar and nonpolar solvents. We first validate the MCTS approach for the design of small- and medium-sized s-BCPs and then use it to efficiently identify sequences of copolymer blocks for large-sized s-BCPs. The structural origins of interfacial tension in these systems are also identified by using the configurations obtained from MD simulations. Chemical insights into the arrangement of copolymer blocks that promote lower interfacial tension were mined using machine learning (ML) techniques. Overall, this work provides an efficient approach to solve design problems via fusion of simulations and ML and provides important groundwork for future experimental investigation of s-BCPs for various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crossing the bridge from molecular catalysis to a heterogenous electrode in electrocatalytic water oxidation

Significant progress has been made in designing single-site molecular Ru(II)-polypyridyl-aqua catalysts for homogenous catalytic water oxidation. Surface binding and transfer of the catalytic reactivity onto conductive substrates provides a basis for heterogeneous applications in electrolytic cells and dye-sensitized photoelectrosynthesis cells (DSPECs). Earlier efforts have focused on phosphonic acid (-PO 3 H 2 ) or carboxylic acid (-CO 2 H) bindings on oxide surfaces. However, issues remain with limited surface stabilities, especially in aqueous solutions at higher pH under conditions that favor water oxidation by reducing the thermodynamic barrier and accelerating the catalytic rate using atom-proton transfer (APT) pathways. Here, we address the problem by combining silane surface functionalization and surface reductive electropolymerization on mesoporous, nanofilms of indium tin oxide (ITO) on fluorine-doped tin oxide (FTO) substrates (FTO| nano ITO). FTO| nano ITO electrodes were functionalized with vinyltrimethoxysilane (VTMS) to introduce vinyl groups on the electrode surfaces by silane attachment, followed by surface electropolymerization of the vinyl-derivatized complex, [Ru II (Mebimpy)(dvbpy)(OH 2 )] 2+ (1 2+ ; Mebimpy: 2,6-bis(1-methyl-1 H -benzo[ d ]imidazol-2-yl)pyridine; dvbpy: 5,5'-divinyl-2,2'-bipyridine), in a mechanism dominated by a grafting-through method. The surface coverage of catalyst 1 2+ was controlled by the number of electropolymerization cycles. The combined silane attachment/cross-linked polymer network stabilized 1 2+ on the electrode surface under a variety of conditions especially at pH > ~6. Surface-grafted poly1 2+ was stable toward redox cycling at pH ~ 7.5 over an ~4-h period. Finally, sustained heterogeneous electrocatalytic water oxidation by the electrode gave steady-state currents for at least ~6 h with a Faradaic efficiency of ~68% for O 2 production.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of multiple organic ligands on size uniformity and optical properties of ZnSe quantum dots

Highlights: ► Highly monodispersed ZnSe quantum dots have been synthesized by wet chemical route. ► Strong quantum confinement effect have been observed in ∼ 4 nm ZnSe quantum dots. ► Enhanced ultraviolet near band emission have been obtained using long chain polymer. -- Abstract: The effects of multi-ligands on the formation and optical transitions of ZnSe quantum dots have been investigated. The dots are synthesized using 3-mercapto-1,2-propanediol and polyvinylpyrrolidone ligands, and have been characterized by X-ray diffraction, transmission electron microscopy (TEM), UV–visible absorption spectroscopy, photoluminescence spectroscopy, and Fourier transform infrared spectroscopy. TEM reveals high monodispersion with an average size of 4 nm. Polymer-stabilized, organic ligand-passivated ZnSe quantum dots exhibit strong UV emission at 326 nm and strong quantum confinement in the UV–visible absorption spectrum. Uniform size and suppressed surface trap emission are observed when the polymer ligand is used. The possible growth mechanism is discussed.

36 MATERIALS SCIENCE↗

Mechanical Properties of Solidifying Assemblies of Nanoparticle Surfactants at the Oil–Water Interface

The effect of polymer surfactant structure and concentration on the self-assembly, mechanical properties, and solidification of nanoparticle surfactants (NPSs) at the oil-water interface was studied. The surface tension of the oil-water interface was found to depend strongly on the choice of the polymer surfactant used to assemble the NPSs, with polymer surfactants bearing multiple polar groups being the most effective at reducing interfacial tension and driving the NPS assembly. By contrast, only small variations in the shear modulus of the system were observed, suggesting that it is determined largely by particle density. In the presence of polymer surfactants bearing multiple functional groups, NPS assemblies on pendant drop surfaces were observed to spontaneously solidify above a critical polymer surfactant concentration. Interfacial solidification accelerated rapidly as polymer surfactant concentration was increased. On long timescales after solidification, pendant drop interfaces were observed to spontaneously wrinkle at sufficiently low surface tensions (approximately 5 mN m -1 ). Interfacial shear rheology of the NPS assemblies was elastic-dominated, with the shear modulus ranging from 0.1 to 1 N m -1 , comparable to values obtained for nanoparticle monolayers elsewhere. Finally, our work paves the way for the development of designer, multicomponent oil-water interfaces with well-defined mechanical, structural, and functional properties.

36 MATERIALS SCIENCE↗

Accelerating Instanton Theory with the Line Integral Nudged Elastic Band Method and Gaussian Process Regression

Quantum tunneling plays a fundamental role in many chemical reactions, particularly proton transfer processes. Ring polymer instanton theory offers a practical framework for computing tunneling rates in complex molecular systems. However, applying the ring polymer instanton method with a potential energy surface generated on-the-fly using electronic structure calculations can be computationally demanding. Here, in this work, we present a new efficient implementation of the ring polymer instanton method by combining the Line Integral Nudged Elastic Band (LI-NEB) approach with Gaussian Process Regression (GPR). We benchmarked this method on prototypical ground-state proton transfer systems, including the benchmark gas-phase hydrogen abstraction reaction H + CH 4 → H 2 + CH 3 , malonaldehyde, and Z-3-amino-propenal (aminopropenal). Our results show that this approach is an order of magnitude faster than traditional instanton algorithms while maintaining excellent agreement with their tunneling rates. This development opens the door to studying proton transfer in larger systems with improved efficiency.

chemical physics↗