SEARCH · Engineering Papers

Results for “Strain improvement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Steady-state fuel performance analyses for the preliminary fuel concept of general atomics fast modular reactor

Here this manuscript presents the fuel performance analysis results of the General Atomics Fast Modular Reactor (FMR) based on an axi-symmetric (2D-RZ) geometry. Three fuel performance model sets that fit the FMR fuel specifications best, i.e., a BISON baseline model set, a BISON diffusion enhancement model set, and a BISON-FASTGRASS model set, were identified and evaluated against a series of relevant experimental cases featuring high burnup and low irradiation temperature conditions. The three BISON-based model sets were then utilized to conduct a comprehensive fuel performance analysis of the FMR fuel under normal operation including the shutdown/restarting periods for refueling. The evaluation of the fuel performance parameters, represented by temperature, internal pressure, stress, and strain, shows that the FMR fuel maintains its thermal and mechanical integrity during normal operation. Technology gaps and limitations are also discussed to guide future efforts for extending the performance analysis to transient scenarios as well as improving the fuel performance evaluation through experiments.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Quorum-sensing molecules increase ethanol yield from Saccharomyces cerevisiae

ABSTRACT One strategy to increase the yield of desired fermentation products is to redirect substrate carbon from biomass synthesis. Nongenetic approaches to alter metabolism may have advantages of general applicability and simple control. The goal of this study was to identify and evaluate chemicals for their ability to inhibit the growth of Saccharomyces cerevisiae while allowing ethanol production with higher yields. Eight potential growth-inhibitory chemicals were screened for their ability to reduce cell growth in 24-well plates. Effective chemicals were then evaluated in cultivations to identify those that simultaneously reduced biomass yield and increased ethanol yield. The yeast quorum-sensing molecules 2-phenylethanol, tryptophol and tyrosol were found to increase the ethanol yield of S. cerevisiae JAY 270. These molecules were tested with seven other yeast strains and ethanol yields of up to 15% higher were observed. The effects of 2-phenylethanol and tryptophol were also studied in bioreactor fermentations. These findings demonstrate for the first time that the ethanol yield can be improved by adding yeast quorum-sensing molecules to reduce the cell growth of S. cerevisiae, suggesting a strategy to improve the yield of ethanol and other yeast fermentation products by manipulating native biological control systems.

Huang, Xing-Feng (ORCID:0000000251165177)↗

DOE OSTI2023

A chemically-defined growth medium to support Lactobacillus-Acetobacter sp. community analysis

Lactobacilli and Acetobacter sp. are commercially important bacteria that often form communities in natural fermentations, including food preparations, spoilage, and in the digestive tract of the fruit fly Drosophila melanogaster. Communities of these bacteria are widespread and prolific, despite numerous strain-specific auxotrophies, suggesting they have evolved nutrient interdependencies that regulate their growth. The use of a chemically-defined medium (CDM) supporting the growth of both groups of bacteria would facilitate the identification of the molecular mechanisms for the metabolic interactions between them. While numerous CDMs have been developed that support specific strains of lactobacilli or Acetobacter , there has not been a medium formulated to support both genera. We developed such a medium, based on a previous CDM designed for growth of lactobacilli, by modifying the nutrient abundances to improve growth yield. We further simplified the medium by substituting casamino acids in place of individual amino acids and the standard Wolfe’s vitamins and mineral stocks in place of individual vitamins and minerals, resulting in a reduction from 40 to 8 stock solutions. These stock solutions can be used to prepare several CDM formulations that support robust growth of numerous lactobacilli and Acetobacter s. Here, we provide the composition and several examples of its use, which is important for tractability in dissecting the genetic and metabolic basis of natural bacterial species interactions.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2020

Final Technical Report for DE-FG02-86ER45268

This work addresses several key issues for understanding the unusual superconductivity in IBS, already shown to be technologically useful materials. 1a). Are reactive gasses like fluorine, chlorine, or water vapor behaving simply as electron donors to cause the superconductivity (at T conset =21 K) in undoped IBS like BaFe 2 As 2 ? 1b). Does exposure to fluorine increase T c in electron-doped IBS materials that are underdoped, e. g. Ba(Fe 0.96 Co 0.04 ) 2 As 2 ? 1c). Can fluorine as a reactive electron-donor, with its relatively greater ease of introduction into the lattice, be used as a rapid tool to search for superconductivity in new materials under investigation? Method of investigation: Using electron probe microanalysis, x-ray photoemission spectroscopy, and dynamical mean field theory calculations, we found that fluorine substitutes for As in the BaFe 2 As 2 lattice, and should therefore behave as an electron donor. We will F-dope Ba(Fe 0.96 Co 0.04 ) 2 As 2 and several new compounds under investigation for superconductivity upon doping to determine fluorine’s effect. Potential impact: If – like for fluorine - a brief exposure to hydrogen indeed causes superconductivity to a depth of 10 microns, this technique could be useful in creating long lengths of superconducting tape without the chemical aggressiveness of fluorine. Using the F ion, which substitutes for As - away from the Fe planes, in underdoped IBS like Ba(Fe 0.96 Co 0.04 ) 2 As 2 may form optimally doped IBS with less impurity scattering of the superconducting Fe 3d electrons resulting in improved superconducting properties. Another potential impact is the speed of checking for superconductivity in new materials under investigation for superconductivity upon doping. 2. What are the effects of Be substitution into IBS, beginning with FeSe and its derivatives (FeSe 1-x S x and FeSe 1-x Te x ) and BaFe 2-x Co x As 2 ? Method of investigation: We recently succeeded in adding Be to the FeSe lattice and found, surprisingly, a factor of four improvement of the low temperature residual resistivity ratio, consistent with improved electronic ordering. Using single crystal x-ray diffraction and x-ray dispersive spectroscopy, determine the concentration and location of the Be dopant. Using resistivity, determine if there is improvement in the residual resistivity achieved by Be doping in the FeSe derivatives (using AlCl 3 :KCl flux growth) and Co-doped BaFe 2 As 2 (using self-flux single crystal growth). Measuring resistivity under strain, determine the changes of the nematic susceptibility at the structural ordering transition causes by the increase in electronic order caused by Be doping in FeSe. Potential impact: Further understanding of IBS, including FeSe which - under physical pressure - has a T c increase to 40 K and -prepared as a monolayer - has a T c reported to be over 100 K. 3. In collaboration, prepare light atom compounds involving Be and look for high pressure-induced superconductivity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2021

A viscoelastic viscoplastic damage model (VPVD)

This report documents the development, implementation, and parameter estimation procedures for aviscoelastic-viscoplastic-viscodamage model. This model is being developed to improve the predictive accuracy of simulations involving plastic bonded explosives (PBX). A representative PBX is PBX9501, which is 95% by weight HMX, 2.5% estane binder and 2.5% nitroplasticizer. Mechanical deformation of this material is primarily accommodated by straining of the polymer binder and rearranging the relatively rigid HMX crystals.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

DOE OSTI2022

Status Update on the Development of Transducers and Bonding Techniques for Enabling Acoustic Measurements of Damage in Microreactor Components

This report provides an overview of potential sensors and sensor-bonding techniques to enable the online acoustic interrogation of microreactor components and enhance structural health monitoring capabilities. The report focuses primarily on optical fiber–based acoustic sensors and describes initial experimental progress toward the deployment of these sensors for microreactor applications. The general approach is to monitor the resonant frequencies of microreactor components and search for evidence of structural defects that could indicate imminent failure. If properly identified, then the components could be repaired during the next reactor outage to prevent costly unplanned shutdowns. The ability to monitor the structural health of components could also reduce the need for time-consuming visual inspections and reduce staffing to improve microreactor economic viability. Increased sensor density is also one of the first steps to moving toward eventual semiautonomous operation. The expected microreactor conditions in which acoustic sensors must survive are characterized, including temperatures, neutron fluences, thermomechanical strains, and vibrational frequencies. Optical fiber–based acoustic sensors are identified as an attractive candidate for acoustic monitoring because of their high accuracy, immunity to electromagnetic interference, and resiliency in high-temperature, high-radiation environments. Optical fiber–based intrinsic sensors, such as type-II fiber-Bragg gratings and Fabry-Pérot Cavities (FPCs), are particularly attractive for a microreactor environment because of their high temperature stability, and FPCs also enable higher frequency interrogation with a lower sensitivity to radiation-induced drift. This report describes multiple interrogation systems, but the best interrogation system for a given situation will depend on the specific microreactor application, including the desired acoustic vibrational amplitudes, modes, and resonant frequencies. Initial experiments included fabricating three FPCs, tack-welding these FPCs to stainless-steel pipes or rods and performing room-temperature acoustic sensing tests to capture the vibrational frequency content. Peaks were identified in the measured frequency spectra and compared with the theoretical fundamental frequencies obtained from Euler-Bernoulli beam theory. Two of the three FPCs measured vibrational frequencies that generally matched those obtained from theory. Future work will include similar testing on pipes or other microreactor components with intentional flaws to evaluate the ability to determine changes in resonant frequencies. Finally, these tests will be repeated at high temperatures, potentially with an applied thermomechanical stress, to include environmental conditions similar to those for a microreactor application.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2024

Optical Strain Sensing for Particle Detection

Optomechanical strain sensing provides attractive opportunities for novel particle detection schemes, as well as studying stress-induced (i.e. non-radiogenic) phonon bursts, which have been demonstrated to limit the coherence times of superconducting qubits and are a suspected culprit in the low energy excesses observed by many dark matter direct detection experiments. We are investigating SiN microring optical resonator strain sensors, developed at Purdue University, for applications in fundamental particle sensing and QIS. These sensors can be embedded in the substrate upon which superconducting qubits are patterned, providing a handle to distinguish decoherence events of radiogenic origin from those due to crystal stress. In a similar way, these sensors can be operated in conjunction with superconducting detectors (e.g., MKIDs, TES) to enable multi-channel readout of particle interactions in the device substrate or serve as anticoincidence detectors, which may be required to ident ify low-energy interactions from dark matter particles down to the fermionic thermal relic mass limit of a few keV. Such sensors can potentially be used to directly observe resonant scattering processes of gamma rays (and perhaps neutrinos) where no detectable quanta are produced in the target, via the microscopic stress induced by the momentum transfer to the (fixed-in-place) crystal lattice as a whole. These strain sensors have so far found application in photonics and communications, but have yet to be adopted for HEP uses, where they can provide unique capabilities in the search for dark matter as well as understanding and improving the coherence times of superconducting qubits.

43 PARTICLE ACCELERATORS↗

NASA NTRS1981

A proposal to conduct a Caribbean plate project involving the application of space technology to the study of Caribbean geology

The Caribbean plate project is designed to improve current understanding of geological resources and geological hazards within the Caribbean region. Models of mineral occurrence and genesis (including energy resources) on a regional scale, which contribute to nonrenewable resource investigations. Models of lithospheric stress and strain on a regional scale, which contribute to forecasting geological hazards such as earthquakes and major volcanic eruptions are developed. Geological information is synthesize, and research tools provided by space technology the study of the Earth's crust are used. The project was organized in a thematic fashion, to focus on specific geological aspects of the Caribbean plate which are considered to be key factors in developing the types of models described. The project adopts a synoptic perspective in seeking to characterize the three dimensional structure, composition, state of stress, and evolution of the entire Caribbean plate. Geological information derived from analysis of space acquired data is combined with information provided by conventional methods to obtain insight into the structure, composition, and evolution of the Earth's crust. In addition, very long baseline interferometry and laser ranging techniques, which are also based upon the use of space technology, obtain information concerning crustal motion that, in turn, provides insight into the distribution and localization of crustal stress.

Wadge, G.↗

NASA NTRS1991

Computational micromechanics of woven composites

The bounds on the equivalent elastic material properties of a composite are presently addressed by a unified energy approach which is valid for both unidirectional and 2D and 3D woven composites. The unit cell considered is assumed to consist, first, of the actual composite arrangement of the fibers and matrix material, and then, of an equivalent pseudohomogeneous material. Equating the strain energies due to the two arrangements yields an estimate of the upper bound for the material equivalent properties; successive increases in the order of displacement field that is assumed in the composite arrangement will successively produce improved upper bound estimates.

Hopkins, Dale A.↗

NASA NTRS1995

Characteristics of Three-Node Smoothing Element under Penalty Constraints

The project is based upon research of Tessler et al. (1994) on an improved variational formulation for post-processing stress predictions in Finite Element Analysis. The methodology, called Smoothing Element Analysis (SEA), employs a three-node smoothing finite element. The present effort focused on verifying the basic constant strain criterion for the three-node smoothing element subject to a set of internal penalty constraints. The convergence characteristics of the element are assessed by first deriving the constrained form of the assumed element stress and stress gradient fields, and then by verifying the validity of the constant strain criterion once the element penalty constraints are explicitly imposed. The analytical investigation is carried out with the use of the symbolic manipulation code 'Mathematica'.

Sobel, Seth S.↗

NASA NTRS1997

Preliminary Evaluation of Low-Density, Low-Conductivity PAN Ablative Composites

In this study, the mechanical response of four low-density, low conductivity polyacrylonitrile (PAN) based carbon fiber reinforced phenolic resin composites was investigated, each prepared with ceramic microballoon fillers. Two of the four PAN composite systems were fabricated with 20% microballoon filler content, while the other two systems were fabricated with 15% microballoon content. Composites with 20% microballoon content were cured at pressures of 1.65 MPa and 0.35 MPa, whereas systems with 15% microballoon content were cured at 1.65 MPa and 0.69 MPa. The improvement in mechanical properties achieved by the influences of the microballoon content and the cure pressure was assessed by comparing the uniaxial tensile results of static strength of the composite at room temperature. Results included stress-strain curves, ultimate strength, strain-to-failure, initial modulus of the PAN composite, and the description of the observed modes of failure.

Veazie, David R.↗

NASA NTRS2017

Development of Storage Methods for Saccharomyces Strains to be Utilized for In situ Nutrient Production in Long-Duration Space Missions

Long-duration space missions will benefit from closed-loop life support technologies that minimize mass, volume, and power as well as decrease reliance on Earth-based resupply. A system for In situ production of essential vitamins and nutrients can address the documented problem of degradation of stored food and supplements. Research has shown that the edible yeast Saccharomyces cerevisiae can be used as an on-demand system for the production of various compounds that are beneficial to human health. A critical objective in the development of this approach for long-duration space missions is the effective storage of the selected microorganisms. This research investigates the effects of different storage methods on survival rates of the non-sporulating probiotic S. boulardii, and S. cerevisiae spores and vegetative cells. Dehydration has been shown to increase long-term yeast viability, which also allows increased shelf-life and reduction in mass and volume. The process of dehydration causes detrimental effects on vegetative cells, including oxidative damage and membrane disruption. To maximize cell viability, various dehydration methods are tested here, including lyophilization (freeze-drying), air drying, and dehydration by vacuum. As a potential solution to damage caused by lyophilization, the efficacy of various cryoprotectants was tested. Furthermore, in an attempt to maintain higher survival rates, the effect of temperature during long-term storage was investigated. Data show spores of the wild-type strain to be more resilient to dehydration-related stressors than vegetative cells of either strain, and maintain high viability rates even after one year at room temperature. In the event that engineering the organism to produce targeted nutrient compounds interferes with effective sporulation of S. cerevisiae, a more robust method for improving vegetative cell storage is being sought. Therefore, anhydrobiotic engineering of S. cerevisiae and S. boulardii is being conducted

nutrient↗

NASA NTRS2017

Development of Storage Methods for Saccharomyces Strains to be Utilized for In Situ Nutrient Production in Long-Duration Space Missions

life support↗

NASA NTRS2019

Directional limits on persistent gravitational waves using data from Advanced LIGO’s first two observing runs

We perform an unmodeled search for persistent, directional gravitational wave (GW) sources using data from the first and second observing runs of Advanced LIGO. We do not find evidence for any GW signals. We place limits on the broadband GW flux emitted at 25 Hz from point sources with a power law spectrum at F(α;Θ) < (0.05–25) × 10^(−8) erg/sq. cmsHz and the (normalized) energy density spectrum in GWs at 25 Hz from extended sources at Ω(α)(Θ) < (0.19–2.89) × 10^(−8) per sr where α is the spectral index of the energy density spectrum. These represent improvements of 2.5–3× over previous limits. We also consider point sources emitting GWs at a single frequency, targeting the directions of Sco X-1, SN 1987A, and the Galactic center. The best upper limits on the strain amplitude of a potential source in these three directions range from h(0) < (3.6–4.7) × 10^(−25), 1.5× better than previous limits set with the same analysis method. We also report on a marginally significant outlier at 36.06 Hz. This outlier is not consistent with a persistent gravitational-wave source as its significance diminishes when combining all of the available data.

B. P. Abbott↗

DOE OSTI2026

Applied genomics for industrially relevant microalgal strain development & optimization: characterizing genotype-phenotype relationships towards scalable environment-enhancing energy systems

Multiple planetary boundaries considered a safe operating space for humanity have been exceeded in recent years, with twice as many boundaries transgressed in 2023 as in 2009. Bioenergy systems are unique in that they can interact with and improve many of the transgressed boundaries directly, including multiple geochemical cycles, water and land use, and climate change. Among bioenergy systems, microalgae-based environment enhancing energy (E 2 -energy) are promising bioenergy systems for drop-in biofuels, valuable materials, chemicals and therapeutics, while making deep emission cuts and remediating wastewater, all without competing for agricultural resources.

09 BIOMASS FUELS↗

NASA NTRS1973

Improved hardening theory for cyclic plasticity.

A temperature-dependent version of a combined hardening theory, including isotropic and kinematic hardening, is presented within the framework of recent plasticity formulations. This theory has been found to be especially useful in finite-element analysis of aerospace vehicle engines under conditions of large plastic strain and low-cycle fatigue.

Vos, R. G.↗

NASA NTRSDate not supplied

Higher-Order Approximations for Stabilizing Zero-Energy Modes in Peridynamics Crystal Plasticity Models with Large Horizon Interactions

The non-ordinary state-based peridynamics theory combines non-local dynamic techniques with a desirable correspondence material principle, allowing for the use of continuum mechanics constitutive models. Such an approach presents a unique capability for solving problems involving discontinuities (e.g., strain localization, fracture, and fragmentation). However, the correspondence-based peridynamics models often suffer from zero-energy mode instabilities in numerical implementation, primarily due to the approximations of the non-local deformation gradient tensor. This paper focuses on a computational scheme for eliminating the zero-energy mode oscillations using a choice of influence functions that improve the truncation error in a higher-order Taylor series expansion of the deformation gradient. The novelty here is a tensor-based derivation of the linear constraint equations, which can be used to systematically identify the particle interaction weight functions for various user-specified horizon radii. In this paper, the proposed higher-order stabilization scheme is demonstrated for multi-dimensional examples involving polycrystalline and composite microstructures, along with comparisons against conventional finite element methods. The proposed stabilization scheme is shown to be highly effective in suppressing the spurious zero-energy mode oscillations in all numerical examples while enabling efficient simulations of strain localizations across material interfaces.

Non-Ordinary State-Based Peridynamics↗

NASA NTRS1982

Evaluation of an improved finite-element thermal stress calculation technique

A procedure for generating accurate thermal stresses with coarse finite element grids (Ojalvo's method) is described. The procedure is based on the observation that for linear thermoelastic problems, the thermal stresses may be envisioned as being composed of two contributions; the first due to the strains in the structure which depend on the integral of the temperature distribution over the finite element and the second due to the local variation of the temperature in the element. The first contribution can be accurately predicted with a coarse finite-element mesh. The resulting strain distribution can then be combined via the constitutive relations with detailed temperatures from a separate thermal analysis. The result is accurate thermal stresses from coarse finite element structural models even where the temperature distributions have sharp variations. The range of applicability of the method for various classes of thermostructural problems such as in-plane or bending type problems and the effect of the nature of the temperature distribution and edge constraints are addressed. Ojalvo's method is used in conjunction with the SPAR finite element program. Results are obtained for rods, membranes, a box beam and a stiffened panel.

Camarda, C. J.↗