SEARCH · Engineering Papers

Results for “Stokes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

NASA NTRS1992

Prediction of asymmetric vortical flows around slender bodies using Navier-Stokes equations

Steady and unsteady asymmetric vortical flows around slender bodies at high angles of attack are solved using the unsteady, compressible, thin-layer Navier-Stokes equations. An implicit, upwind-biased, flux-difference splitting, finite-volume scheme is used for the numerical computations. For supersonic flows past point cones, the locally conical flow assumption have been used for efficient computational studies of this phenomenon. Asymmetric flows past a 5-deg semiapex-angle circular cone at different angles of attack, free-stream Mach numbers, and Reynolds numbers have been studied in responses to different sources of disturbances. The effects of grid fineness and computational domain size have also been investigated. Next, the responses of three-dimensional supersonic asymmetric flow around a 5-deg circular cone at different angles of attack and Reynolds numbers to short-duration sideslip disturbances are presented. The results show that flow asymmetry becomes stronger as the Reynolds number and angles of attack are increased. One of the cases of flow over a cone-cylinder configuration is validated fairly well by experimental data.

Liu, C. H.↗

NASA NTRS1991

Flowfield analysis of modern helicopter rotors in hover by Navier-Stokes method

The viscous, three-dimensional, flowfields of UH60 and BERP rotors are calculated for lifting hover configurations using a Navier-Stokes computational fluid dynamics method with a view to understand the importance of planform effects on the airloads. In this method, the induced effects of the wake, including the interaction of tip vortices with successive blades, are captured as a part of the overall flowfield solution without prescribing any wake models. Numerical results in the form of surface pressures, hover performance parameters, surface skin friction and tip vortex patterns, and vortex wake trajectory are presented at two thrust conditions for UH60 and BERP rotors. Comparison of results for the UH60 model rotor show good agreement with experiments at moderate thrust conditions. Comparison of results with equivalent rectangular UH60 blade and BERP blade indicates that the BERP blade, with an unconventional planform, gives more thrust at the cost of more power and a reduced figure of merit. The high thrust conditions considered produce severe shock-induced flow separation for UH60 blade, while the BERP blade develops more thrust and minimal separation. The BERP blade produces a tighter tip vortex structure compared with the UH60 blade. These results and the discussion presented bring out the similarities and differences between the two rotors.

Srinivasan, G. R.↗

NASA NTRS1993

Coherent anti-Stokes Raman spectroscopy temperature measurements in a hydrogen-fueled supersonic combustor

Coherent anti-Stokes Raman spectroscopy (CARS) thermometry has been used to obtain static temperature cross sections in a three-dimensional supersonic combustor flowfield. Data were obtained in three spanwise planes downstream of a single normal fuel injector which was located downstream of a rearward-facing step. The freestream flow was nominally Mach 2 and was combustion heated to a total temperature of 1440 K (yielding a static temperature of about 800 K in the freestream) to simulate the inflow to a combustor operating at a flight Mach number of about 5.4. Since a broadband probe laser was used an instantaneous temperature sample was obtained with each laser shot at a repetition rate of 10 Hz. Thus root-mean-square (rms) temperatures and temperature probability density functions (pdf's) were obtained in addition to mean temperatures.

Smith, Michael W.↗

NASA NTRS1993

A multidimensional flux function with applications to the Euler and Navier-Stokes equations

In the present grid-independent approximate Riemann solver for 2D and 3D flows that are governed by the Euler or Navier-Stokes equations, fluxes on grid faces are obtained by wave decomposition; the assumption of information-propagation in the velocity-difference directions leads to a more accurate resolution of shear and shock waves, when these are are oblique to the grid. The model, which yields significantly greater accuracy in both supersonic and subsonic first-order spatially accurate computations, describes the difference in states at each grid interface by the action of five waves.

Rumsey, Christopher L.↗

NASA NTRS1991

Calculations of separated 3-D flows with a pressure-staggered Navier-Stokes equations solver

A Navier-Stokes equations solver based on a pressure correction method with a pressure-staggered mesh and calculations of separated three-dimensional flows are presented. It is shown that the velocity pressure decoupling, which occurs when various pressure correction algorithms are used for pressure-staggered meshes, is caused by the ill-conditioned discrete pressure correction equation. The use of a partial differential equation for the incremental pressure eliminates the velocity pressure decoupling mechanism by itself and yields accurate numerical results. Example flows considered are a three-dimensional lid driven cavity flow and a laminar flow through a 90 degree bend square duct. For the lid driven cavity flow, the present numerical results compare more favorably with the measured data than those obtained using a formally third order accurate quadratic upwind interpolation scheme. For the curved duct flow, the present numerical method yields a grid independent solution with a very small number of grid points. The calculated velocity profiles are in good agreement with the measured data.

Kim, S.-W.↗

NASA NTRS1991

An efficient and robust algorithm for two dimensional time dependent incompressible Navier-Stokes equations - High Reynolds number flows

An algorithm is presented for unsteady two-dimensional incompressible Navier-Stokes calculations. This algorithm is based on the fourth order partial differential equation for incompressible fluid flow which uses the streamfunction as the only dependent variable. The algorithm is second order accurate in both time and space. It uses a multigrid solver at each time step. It is extremely efficient with respect to the use of both CPU time and physical memory. It is extremely robust with respect to Reynolds number.

Goodrich, John W.↗

NASA NTRS1993

A Navier-Stokes solver for turbomachinery applications

A computer code for solving the Reynolds-averaged full Navier-Stokes equations has been developed and applied using H- and C-type grids. The Baldwin-Lomax eddy-viscosity model is used for turbulence closure. The integration in time is based on an explicit four-stage Runge-Kutta scheme. Local time stepping, variable coefficient implicit residual smoothing, and a full multigrid method have been implemented to accelerate steady-state calculations. A grid independence analysis is presented for a transonic rotor blade. Comparisons with experimental data show that the code is an accurate viscous solver and can give very good blade-to-blade predictions for engineering applications.

Arnone, A.↗

NASA NTRS1993

Aspects of a high-resolution scheme for the Navier-Stokes equations

In this paper we emphasize the importance of the form of the numerical dissipation model in computing accurate viscous flow solutions. A high-resolution scheme for viscous flows based on three-point central differencing and a matrix dissipation is considered. The various components of this scheme, including 'entropy fix', limiter function, and boundary-point dissipation are discussed. By analyzing boundary-point dissipation stencils, we confirm that with the matrix dissipation model the normal numerical dissipation terms in the streamwise momentum equation are independent of the Reynolds number. Such independence is not achieved with a scalar dissipation form. The accuracy of the central-difference scheme, with and without matrix dissipation, and the flux-difference split scheme of Roe, which is classified as a high-resolution scheme, is compared. For this comparison, three high Reynolds number laminar flows are considered. Solutions of the Navier-Stokes equations are obtained for low-speed flow over a flat plate, transonic flow over an airfoil with transition near the leading edge, and hypersonic flow over a compression ramp. The emphasis of the comparison is primarily on the details of the viscous flows. The necessity of the high-resolution property is revealed.

Swanson, R. C.↗

NASA NTRS1991

Computational results for 2-D and 3-D ramp flows with an upwind Navier-Stokes solver

An implicit, finite-difference, upwind, full Navier-Stokes solver was applied to supersonic/hypersonic flows over two-dimensional ramps and three-dimensional obstacle. Some of the computed results are presented. The numerical scheme used in the study is an implicit, spatially second order accurate, upwind, LU-ADI scheme based on Roe's approximate Reimann solver with MUSCL differencing of Van Leer. An algebraic grid generation scheme based on generalized interpolation scheme was used in generating the grids for the various 2-D and 3-D problems.

Venkatapathy, Ethiraj↗

NASA NTRS1993

On solving the compressible Navier-Stokes equations for unsteady flows at very low Mach numbers

The properties of a preconditioned, coupled, strongly implicit finite-difference scheme for solving the compressible Navier-Stokes equations in primitive variables are investigated for two unsteady flows at low speeds, namely the impulsively started driven cavity and the startup of pipe flow. For the shear-driven cavity flow, the computational effort was observed to be nearly independent of Mach number, especially at the low end of the range considered. This Mach number independence was also observed for steady pipe flow calculations; however, rather different conclusions were drawn for the unsteady calculations. In the pressure-driven pipe startup problem, the compressibility of the fluid began to significantly influence the physics of the flow development at quite low Mach numbers. The present scheme was observed to produce the expected characteristics of completely incompressible flow when the Mach number was set at very low values. Good agreement with incompressible results available in the literature was observed.

Pletcher, R. H.↗

NASA NTRS1993

Extension of state-vector splitting to the Navier-Stokes equations

A multi-dimensional upwind scheme for solving the Euler equations has been extended to solve the Navier-Stokes equations. These methods share the property of not requiring body-fitted computational grids. A time advance scheme which is second-order accurate in time and space has been developed for use in conjunction with state-vector splitting to accurately resolve regions with significant gradients in flow quantities. The scheme has been tested on several simple viscous flow problems for which analytic solutions are known; the agreement of computation with theory is excellent.

Gooch, Carl F.↗

NASA NTRS1993

Time-accurate Navier-Stokes calculations with multigrid acceleration

An efficient method for calculating unsteady flows is presented, with emphasis on a modified version of the thin-layer Navier-Stokes equations. Fourier stability analysis is used to illustrate the effect of treating the source term implicitly instead of explicity, as well as to illustrate other algorithmic choices. A 2D circular cylinder (with a Reynolds number of 1200 and a Mach number of 0.3) is calculated. The present scheme requires only about 10 percent of the computer time required by global minimum time stepping.

Melson, N. D.↗

NASA NTRS1993

Navier-Stokes analysis of three-dimensional S-ducts

Full 3D Navier-Stokes computational results are presented for compressible flows within nondiffusing and diffusing S-ducts. The present study provides an understanding of the performance characteristics of typical S-ducts with attached and separated flows and provides a frame of reference for future computational fluid dynamic studies of internal flows with strong secondary flows. The predicted results, which were obtained using both H- and O-grids, are compared with the experimental wall pressures, static and total pressure fields, and velocity vectors. In addition, computed boundary-layer thickness, velocity profiles in wall coordinates and skin friction values are presented. The inviscid contributions to the secondary flows are quantified. The S-duct entrance Mach number was 0.6, and the Reynolds number was 1.76 x 10 exp 6 based on the upstream duct diameter.

Harloff, G. J.↗

NASA NTRS1993

Comparisons between DSMC and the Navier-Stokes equations for reentry flows

A detailed comparison is made between Navier-Stokes and DSMC calculations for flows near the continuum limit to assess the accuracy of the continuum equations in this regime. Meaningful comparisons require the use of similar physical models. This necessitates the inclusion of a separate rotational energy equation and use of slip boundary conditions. Inclusion of slip boundary conditions resulted in improved agreement between surface properties. Moreover, good agreement was obtained for the various temperatures in the nonequilibrium portion of the flow field that does not contain the shock region. Departures are noted in the shock region and in regions where thermal diffusion effects are important.

Olynick, David R.↗

NASA NTRS1993

Navier-Stokes prediction of a delta wing in roll with vortex breakdown

The three-dimensional, Reynolds-averaged, Navier-Stokes (RANS) equations are used to numerically simulate vortical flow about a 65 degree sweep delta wing. Subsonic turbulent flow computations are presented for this delta wing at 30 degrees angle of attack and static roll angles up to 42 degrees. This work is part of an on going effort to validate the RANS approach for predicting high-incidence vortical flows, with the eventual application to wing rock. The flow is unsteady and includes spiral-type vortex breakdown. The breakdown positions, mean surface pressures, rolling moments, normal forces, and streamwise center-of-pressure locations compare reasonably well with experiment. In some cases, the primary vortex suction peaks are significantly underpredicted due to grid coarseness. Nevertheless, the computations are able to predict the same nonlinear variation of rolling moment with roll angle that appeared in the experiment. This nonlinearity includes regions of local static roll instability, which is attributed to vortex breakdown.

Chaderjian, Neal M.↗

NASA NTRS1993

Navier-Stokes simulation of external/internal transonic flow on the forebody/inlet of the AV-8B Harrier II

In this work, the computation of combined external/internal transonic flow on the complex forebody/inlet configuration of the AV-8B Harrier II is performed. The actual aircraft has been measured and its surface and surrounding domain, in which the fuselage and inlet have a common wall, have been described using structured grids. The 'thin-layer' Navier-Stokes equations were used to model the flow along with the Chimera embedded multi-block technique. A fully conservative, alternating direction implicit (ADI), approximately factored, partially fluxsplit algorithm was employed to perform the computation. Comparisons to some experimental wind tunnel data yielded good agreement for flow at zero incidence and angle of attack. The aim of this paper is to provide a methodology or computational tool for the numerical solution of complex external/internal flows.

Mysko, Stephen J.↗

NASA NTRS1993

Unsteady Navier-Stokes simulation of the canard-wing-body ramp motion

A time-accurate thin-layer Navier-Stokes simulation of the unsteady flowfield is performed for a typical canard-wing-body configuration undergoing ramp motions. The computations are made at a transonic Mach number of 0.90 and for ramp angles from 0 to 15 degrees. Accuracy is determined by comparisons with steady-state experimental data and with spatial and time-step refinement studies. During the ramp motion, the computational results show improved dynamic lift performance and a strong canard-wing interaction for the canard-on configuration. Formation of the canard leading-edge vortex is inhibited in the early stages of the ramp motion. An analysis performed on the transient flowfield after the ramp motion ends shows that the canard vortex rapidly gains strength and vortex breakdown eventually occurs. These characteristics of the canard vortex have significant influences on wing performance.

Tu, Eugene L.↗

NASA NTRS1993

Navier-Stokes computations on full-span wing-body configuration with oscillating control surfaces

Unsteady Navier-Stokes simulations have been performed for vortical flows over an 'arrow-wing' configuration of a supersonic transport in the transonic regime. Computed steady pressures and integrated force coefficients with and without control surface deflection at a moderate angle of attack are compared with experiment. For unsteady cases, oscillating trailing-edge control surfaces are modeled by using moving grids. Response characteristics between symmetric and anti-symmetric oscillatory motions of the control surfaces on the left and right wings are studied. The anti-symmetric case produces higher lift than the steady case with no deflection, and the unsteady symmetric case produces higher lift than the anti-symmetric case. The detailed analysis of the wake structure revealed a strong interaction between the primary vortex and the wake vortex sheet from the flap region when the flap is deflected up.

Obayashi, Shigeru↗