Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Simulation methods.”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Neural network for 3D inertial confinement fusion shell reconstruction from single radiographs

In inertial confinement fusion (ICF), x-ray radiography is a critical diagnostic for measuring implosion dynamics, which contain rich three-dimensional (3D) information. Traditional methods for reconstructing 3D volumes from 2D radiographs, such as filtered backprojection, require radiographs from at least two different angles or lines of sight (LOS). In ICF experiments, the space for diagnostics is limited, and cameras that can operate on fast timescales are expensive to implement, limiting the number of projections that can be acquired. To improve the imaging quality as a result of this limitation, convolutional neural networks (CNNs) have recently been shown to be capable of producing 3D models from visible light images or medical x-ray images rendered by volumetric computed tomography. Here, we propose a CNN to reconstruct 3D ICF spherical shells from single radiographs. We also examine the sensitivity of the 3D reconstruction to different illumination models using preprocessing techniques such as pseudo-flatfielding. To resolve the issue of the lack of 3D supervision, we show that training the CNN utilizing synthetic radiographs produced by known simulation methods allows for reconstruction of experimental data as long as the experimental data are similar to the synthetic data. We also show that the CNN allows for 3D reconstruction of shells that possess low mode asymmetries. Further comparisons of the 3D reconstructions with direct multiple LOS measurements are justified.

3D Reconstruction↗

Diffusion Paths for Interstitial Impurities in Different Polymorphic Modifications of Niobium Silicide Nb{sub 5}Si{sub 3}

Structural models of the α, β, and γ modifications of Nb{sub 5}Si{sub 3} silicides, which are used as a reinforcing phase in composites obtained in situ based on the Nb‒Si system, have been constructed by computer simulation methods. A geometric analysis of unit cells is performed using the H-poisk program to estimate the voids existing in the structures. The results of measuring the number of voids and their sizes are reported. A conclusion about possible diffusion paths of interstitial boron, carbon, nitrogen and oxygen atoms is drawn based on the calculation results, and the solubility of these impurities in the structure of each Nb{sub 5}Si{sub 3} modification is estimated.

36 MATERIALS SCIENCE↗

Multi-metastable states induced by the optical pump-probe process in terahertz quantum cascade lasers

The optical pump-probe process in terahertz quantum cascade lasers is studied theoretically by using the open system simulation method. The emitter injection is considered and the charge neutrality in the active region is broken. We find that nonequilibrium oscillations may appear in the recovery processes. In particular, the formation of different equilibrium values of the population change after the periodic pulse pumping is observed clearly. Here, the phenomenon of multi-metastable states stems from the electron regulation by the emitter injection. Finally, we discuss the important impacts of the equilibrium stabilization time and obtain an in-depth understanding of the emitter injection.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of recovery time of nonlinear absorber saturated losses on the soliton pulse structure in a fibre laser with different cavity lengths

Using numerical simulation methods, we have calculated the dependences of the pulse profile and spectrum of a ring fibre laser in the region of anomalous group velocity dispersion on the length of the laser cavity and the recovery time of the nonlinear absorber saturated losses. It is found that with increasing cavity length the laser pulse acquires a pedestal, the positions of its edges corresponding to the frequencies of the Kelly sidebands. It is shown that the finiteness of the recovery time of the saturable absorber leads to an asymmetry in the profile and spectrum of the laser pulse. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Solar panel thermal cycling testing by solar simulation and infrared radiation methods

For the solar panels of the European Space Agency (ESA) satellites OTS/MAROTS and ECS/MARECS the thermal cycling tests were performed by using solar simulation methods. The performance data of two different solar simulators used and the thermal test results are described. The solar simulation thermal cycling tests for the ECS/MARECS solar panels were carried out with the aid of a rotatable multipanel test rig by which simultaneous testing of three solar panels was possible. As an alternative thermal test method, the capability of an infrared radiation method was studied and infrared simulation tests for the ultralight panel and the INTELSAT 5 solar panels were performed. The setup and the characteristics of the infrared radiation unit using a quartz lamp array of approx. 15 sq and LN2-cooled shutter and the thermal test results are presented. The irradiation uniformity, the solar panel temperature distribution, temperature changing rates for both test methods are compared. Results indicate the infrared simulation is an effective solar panel thermal testing method.

Nuss, H. E.↗

Closing the Certification Gaps in Adaptive Flight Control Software

Over the last five decades, extensive research has been performed to design and develop adaptive control systems for aerospace systems and other applications where the capability to change controller behavior at different operating conditions is highly desirable. Although adaptive flight control has been partially implemented through the use of gain-scheduled control, truly adaptive control systems using learning algorithms and on-line system identification methods have not seen commercial deployment. The reason is that the certification process for adaptive flight control software for use in national air space has not yet been decided. The purpose of this paper is to examine the gaps between the state-of-the-art methodologies used to certify conventional (i.e., non-adaptive) flight control system software and what will likely to be needed to satisfy FAA airworthiness requirements. These gaps include the lack of a certification plan or process guide, the need to develop verification and validation tools and methodologies to analyze adaptive controller stability and convergence, as well as the development of metrics to evaluate adaptive controller performance at off-nominal flight conditions. This paper presents the major certification gap areas, a description of the current state of the verification methodologies, and what further research efforts will likely be needed to close the gaps remaining in current certification practices. It is envisioned that closing the gap will require certain advances in simulation methods, comprehensive methods to determine learning algorithm stability and convergence rates, the development of performance metrics for adaptive controllers, the application of formal software assurance methods, the application of on-line software monitoring tools for adaptive controller health assessment, and the development of a certification case for adaptive system safety of flight.

Jacklin, Stephen A.↗

Molecular Simulation of Water Extraction into a Tri-n-Butyl-Phosphate/n-Dodecane Solution

Abstract: Molecular dynamics simulations were performed to investigate water extraction into a solution of 30 vol% tri-n-butyl-phosphate (TBP) in n-dodecane. This solvent extraction mixture is commonly used in hydrometallurgical and nuclear fuel recycling operations for recovering metals from aqueous streams. It is known that water is coextracted in the organic phase and that it competes with metal ions for the available extractant agent (TBP). Therefore investigating pure water extraction provides a realistic prototype to test molecular simulation methods for the first time in this area. Our computational results indicate that the TBP electric dipole moment has a significant effect on the predicted water solubility. A larger TBP dipole moment decreases the aqueous-organic interfacial tension, leading to increased roughness of the aqueous-organic interface. Interfacial roughness has a significant effect on disrupting the interfacial water hydrogen bonding structure, resulting in a greater number of dangling water molecules at the interface. This enhances the probability of water molecules to break away from the aqueous phase and to migrate into the bulk of the organic phase. Therefore, the magnitude of the TBP dipole moment is a crucial factor in controlling water hydrogen bond breaking at the aqueous-organic interface. By slightly lowering the atomic partial charges of the TBP atoms, to produce a dipole moment that better agrees with experimental data, we were able to predict water solubility in close agreement with experimental measurements. Hence we demonstrate that a molecular modeling and simulation approach may provide quantitative support to experimental programs in this area. In addition, our simulation results shed light into the molecular mechanism of water extraction, the critical role of TBP, and the structural forms of water molecules both at the interface and in the bulk of the organic phase. Specifically, it is found that water molecules are extracted either as single molecules or as clusters. Furthermore, within the organic phase, the extracted water forms clusters with up to 20 water molecules, however, more than 70% of these water clusters contain less than 5 water molecules when the water extraction process reaches saturation.

de Almeida, Valmor F↗

Analysis of the static magnetic field-dependent optical transmission of Ni nanorod colloidal suspensions

The magnetic field-dependent optical transmission of dilute Ni nanorod aqueous suspensions was investigated. A series of four samples of nanorods were synthesized using the AAO template method and processed to stable colloids. The distributions of their length and diameter were characterized by analysis of TEM images and revealed average diameters of ∼25 nm and different lengths in the range of 60 nm–1100 nm. The collinear magnetic and optical anisotropy was studied by static field-dependent transmission measurements of linearly polarized light parallel and perpendicular to the magnetic field direction. The experimental results were modelled assuming the field-dependent orientation distribution function of a superparamagnetic ensemble for the uniaxial ferromagnetic nanorods in liquid dispersion and extinction cross sections for longitudinal and transversal optical polarization derived from different approaches, including the electrostatic approximation and the separation of variables method, both applied to spheroidal particles, as well as finite element method simulations of spheroids and capped cylindrical particles. The extinction cross sections were compared to reveal the differences associated with the approximations of homogeneous polarization and/or particle shape. The consequences of these approximations for the quantitative analysis of magnetic field-dependent optical transmission measurements were investigated and a reliable protocol derived. Furthermore, the changes in optical cross sections induced by electromagnetic interaction between two nanorods in parallel end-to-end and side-by-side configuration as a function of their separation were studied.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PRESSURE SHIFT AND GRAVITATIONAL REDSHIFT OF BALMER LINES IN WHITE DWARFS: REDISCUSSION

The Stark-induced shift and asymmetry, the so-called pressure shift (PS) of H{sub α} and H{sub β} Balmer lines in spectra of DA white dwarfs (WDs), have been examined in detail as masking effects in measurements of the gravitational redshift in WDs. The results are compared with our earlier ones from a quarter of a century ago. In these earlier papers, the standard, symmetrical Stark line profiles, as a dominant constituent of the Balmer line profiles but shifted as a whole by the PS effect, were applied to all spectrally active layers of the WD atmosphere. At present, in each of the WD layers, the Stark line profiles (especially of H{sub β}) are inherently asymmetrical and shifted due to the effects of strong inhomogeneity of the perturbing fields in plasma. To calculate the Stark line profiles in successive layers of the WD atmosphere we used the modified Full Computer Simulation Method, able to take adequately into account the complexity of local elementary quantum processes in plasma. In the case of the H{sub α} line, the present value of Stark-induced shift of the synthetic H{sub α} line profile is about half the previous one and it is negligible in comparison with the gravitational redshift. In the case of the H{sub β} line, the present value of Stark-induced shift of the synthetic H{sub β} line profile is about twice the previous one. The source of this extra shift is the asymmetry of H{sub β} peaks.

79 ASTRONOMY AND ASTROPHYSICS↗

MOLECULAR SIMULATION OF PHASE EQUILIBRIA FOR COMPLEX FLUIDS

The general area of this project was the development and application of novel molecular simulation methods for prediction of thermodynamic and structural properties of complex polymeric, surfactant and ionic fluids. Over this project period, we have made considerable progress in developing novel algorithms to meet the computational challenges presented by the strong or long-range interactions in these systems and have generated data for well-defined mod-els that can be used to test theories and compare to experimental data. Overall, 42 archival papers and many invited and contributed presentations and lectures have been based on work supported by this project. 6 PhD, 1 M.S. and 2 postdoctoral students have been associated with this work, as listed in the body of the report.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ultrasonic fingerprint sensor using a piezoelectric micromachined ultrasonic transducer array integrated with complementary metal oxide semiconductor electronics

This paper presents an ultrasonic fingerprint sensor based on a 24 × 8 array of 22 MHz piezoelectric micromachined ultrasonic transducers (PMUTs) with 100 μm pitch, fully integrated with 180 nm complementary metal oxide semiconductor (CMOS) circuitry through eutectic wafer bonding. Each PMUT is directly bonded to a dedicated CMOS receive amplifier, minimizing electrical parasitics and eliminating the need for through-silicon vias. The array frequency response and vibration mode-shape were characterized using laser Doppler vibrometry and verified via finite element method simulation. The array's acoustic output was measured using a hydrophone to be ∼14 kPa with a 28 V input, in reasonable agreement with predication from analytical calculation. Pulse-echo imaging of a 1D steel grating is demonstrated using electronic scanning of a 20 × 8 sub-array, resulting in 300 mV maximum received amplitude and 5:1 contrast ratio. Because the small size of this array limits the maximum image size, mechanical scanning was used to image a 2D polydimethylsiloxane fingerprint phantom (10 mm × 8 mm) at a 1.2 mm distance from the array.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of air breakdown with a focusing lens on ultrashort laser ablation

The effect of air breakdown on ultrashort laser ablation is investigated in this letter using an integrated simulation method on atomistic level. The generation of air breakdown with different laser peak power densities in the range from 10{sup 13} to 10{sup 16} W/cm{sup 2} and various focusing conditions is analyzed. Air breakdown is generated directly from laser energy absorption through avalanche ionization at a high power density (over 10{sup 14} W/cm{sup 2}), while at a lower power density, air breakdown is assisted by a metal target near the focal region. The laser energy loss due to air breakdown and its effect on laser ablation are studied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear absorption of short intense laser pulse in multispecies plasma

In the present paper, the detailed investigation concerning the effect of inclusion of heavy negative ions into the finite background plasma on the laser absorption has been carried out by employing particle-in-cell simulation method. For this purpose, in this configuration, the laser energy absorption relying on the nonlinear phenomena such as phase-mixing, wave-breaking, and scattering has been studied in the Raman-Brillouin regime. It is shown that the inclusion of heavy negative ions suppresses the scattering while increases the phase-mixing time. Moreover, it is illustrated that this inclusion can increase the laser absorption in finite plasma environment, after saturation. The obtained results are expected to be relevant to the experiments on the mass spectrometry with laser desorption techniques as well as on the laser-plasma interaction with application to particles acceleration.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical simulation of amplification of frequency-modulated radiation in a gas amplifier THL-100 laser system

Numerical simulation methods have been used to study the effect of frequency modulation of input laser radiation with a pulse duration of 250 ps on the gain characteristics in a gas XeF (C – A) amplifier of the hybrid THL-100 laser system at a pump energy of 270 – 400 J. Using the Wigner distribution function, local radiation spectra are calculated at various points of the input laser beam with positive and negative chirps. The effect of the pump energy of the amplifier on the energy, intensity, and duration of the output laser radiation pulses is investigated. It is shown that with an insignificant change in energy, the pulse duration of the output radiation turns out to be longer with a negative chirp of the input radiation. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular-based analysis of nanoparticle solvation: Classical density functional approach

Proper statistical mechanics understanding of nanoparticle solvation processes requires an accurate description of the molecular structure of the solvent. Achieving this goal with standard molecular dynamics (MD) simulation methods is challenging due to large length scales. An alternative approach to this problem can be formulated using classical density functional theory (cDFT), where a full configurational description of the positions of all the atoms is replaced by collective atomic site densities in the molecule. Using an example of the negatively charged silica-like system in an aqueous polar environment represented by a two-site water model, we demonstrate here that cDFT can reproduce MD data at a fraction of the computational cost. An important implication of this result is the ability to understand how the solvent molecular features may affect the system’s properties at the macroscopic scale. A concrete example highlighted in this work is the analysis of nanoparticle interactions with sizes of up to 100 nm in diameter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The complex chemical Langevin equation

The chemical Langevin equation (CLE) is a popular simulation method to probe the stochastic dynamics of chemical systems. The CLE’s main disadvantage is its break down in finite time due to the problem of evaluating square roots of negative quantities whenever the molecule numbers become sufficiently small. We show that this issue is not a numerical integration problem, rather in many systems it is intrinsic to all representations of the CLE. Various methods of correcting the CLE have been proposed which avoid its break down. We show that these methods introduce undesirable artefacts in the CLE’s predictions. In particular, for unimolecular systems, these correction methods lead to CLE predictions for the mean concentrations and variance of fluctuations which disagree with those of the chemical master equation. We show that, by extending the domain of the CLE to complex space, break down is eliminated, and the CLE’s accuracy for unimolecular systems is restored. Although the molecule numbers are generally complex, we show that the “complex CLE” predicts real-valued quantities for the mean concentrations, the moments of intrinsic noise, power spectra, and first passage times, hence admitting a physical interpretation. It is also shown to provide a more accurate approximation of the chemical master equation of simple biochemical circuits involving bimolecular reactions than the various corrected forms of the real-valued CLE, the linear-noise approximation and a commonly used two moment-closure approximation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A molecular dynamics study of chloride binding by the cryptand SC24

The capture of chloride from water by the tetraprotonated form of the spherical macrotricyclic molecule SC24 was studied using molecular dynamics simulation methods. This model ionophore represents a broad class of molecules which remove ions from water. Two binding sites for the chloride were found, one inside and one outside the ligand. These sites are separated by a potential energy barrier of approximately 20 kcal mol-1. The major contribution to this barrier comes from dehydration of the chloride. The large, unfavorable dehydration effect is compensated for by an increase in electrostatic attraction between the oppositely charged chloride and cryptand, and by energetically favorable rearrangements of water structure. Additional assistance in crossing the barrier and completing the dehydration of the ion is provided by the shift of three positively charged hydrogen atoms of the cryptand towards the chloride. This structural rigidity is partially responsible for its selectivity.

NASA Discipline Exobiology↗

Laplace Transform–Based Quantum Eigenvalue Transformation via Linear Combination of Hamiltonian Simulation

Eigenvalue transformations, which include solving time-dependent differential equations as a special case, have a wide range of applications in scientific and engineering computation. While quantum algorithms for singular value transformations are well studied, eigenvalue transformations are distinct, especially for nonnormal matrices. Here, we propose an efficient quantum algorithm for performing a class of eigenvalue transformations that can be expressed as a certain type of matrix Laplace transformation. This allows us to significantly extend the recently developed linear combination of Hamiltonian simulation method [D. An, J.-P. Liu, and L. Lin, Phys. Rev. Lett., 131 (2023), 150603; D. An, A. M. Childs, and L. Lin, Commun. Math. Phys. 407, 19 (2026)] to represent a wider class of eigenvalue transformations, such as powers of the matrix inverse, 𝐴 −𝑘 , and the exponential of the matrix inverse, 𝑒 −𝐴 −1 . The latter can be interpreted as the solution of a mass-matrix differential equation of the form form 𝐴⁢𝑢′⁡⁡(𝑡) =−𝑢⁡(𝑡). We demonstrate that our eigenvalue transformation approach can solve this problem without explicitly inverting 𝐴, thereby reducing the computational complexity.

Laplace transform↗