Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Shock structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Generation of Pc 1 waves by the ion temperature anisotropy associated with fast shocks caused by sudden impulses

The high correlation of Pc 1 events with magnetospheric compressions is known. A mechanism is proposed which leads to the generation of Pc 1 waves. The interaction of a dynamic pressure pulse with the earth's bow shock leads to the formation of a weak fast-mode shock propagating into the magnetoshealth. The shock wave can pass right through a tangential discontinuity (magnetopause) and into the magnetosphere, without disturbing either of the structures. In a quasiperpendicular geometry, the shock wave exhibits anisotropic heating. This anisotropy drives unstable ion-cyclotron waves which can contribute to the generation of the Pc 1 waves which are detected. The viability of the mechanism is demonstrated with simulations. This mechanism could explain the peak in the occurrence of observed Pc 1 waves in the postnoon sector where a field-aligned discontinuity in the solar wind would most often be parallel to the magnetopause surface due to the average Parker-spiral magnetic-field configuration.

Mandt, M. E.↗
DOE OSTI2023

Shock Compression of Fluorapatite to 120 GPa

Apatite is a phosphate mineral relevant to shock metamorphism in planetary materials. Here, we report on the response of natural fluorapatite from Durango, Mexico under shock wave loading between 14.5 and 119.5 GPa. Wave profile measurements were obtained in plate-impact experiments conducted on [0001]-oriented fluorapatite single crystals. To GPa peak stresses, we observed a two-wave structure indicating an elastic-inelastic response with elastic wave amplitudes of 10.5–13.1 GPa. Between 39.1 and 62.1 GPa, a complex wave structure was observed involving the propagation of three waves. At and above 73.7 GPa, only a single shock wave was observed. The data above 73.7 GPa provided the following linear shock velocity – particle velocity relationship: U s = 6.5(2) + 0.78(6) u p , (mm/μs). Above 80 GPa, the densities in the shocked state exceed both the extrapolated 300-K density of fluorapatite and the predicted 300-K density for a mixture of the high-pressure assemblage, tuite and CaF 2 . Furthermore, this result indicates that fluorapatite undergoes a transition to a denser structure under shock loading at these conditions. The shock response of fluorapatite is observed to be similar to enstatite but stiffer than quartz and albite at the stresses examined in this work.

58 GEOSCIENCES↗
NASA NTRS1990

25 years of the impact-volcanic controversy - Is there anything new under the sun or inside the earth?

The evidence for meteorite impact and internal volcanic processes (cryptovolcanism) as the cause of the K-T extinction and for cryptoexplosion structures is briefly reviewed. It is shown that numerous studies reinforce the view that shock-metamorphic features uniquely indicate shock pressure from 5 GPa to over 50 GPa, that no generally accepted shock-metamorphic features have been found in unquestioned volcanic structures, and that no internal process has been demonstrated to produce the required shock pressures. This history therefore supports an impact origin for both cryptoexplosion structures and the K-T event. Future discoveries required to make the cryptovolcanic theory a respectable alternative are discussed.

French, Bevan M.↗
NASA NTRS1986

The interstellar medium

Observations and models of interstellar matter in the Milky Way are reviewed. The general structure of the gas layer, high velocity gas, and heavy element depletion patterns are outlined. The IUE survey of Fe and Si abundances, and the correlation of Fe and Si depletions with infrared cirrus are described. Studies of neutral hydrogen may disagree with three-phase models of the interstellar medium, dominated by supernova remnants. The effects of shock waves on interstellar medium structure, the grain population, and refractory element abundances are considered. It appears that the frequency, distribution, energy, and dynamical effects of supernovae in the galaxy may be overestimated.

Shull, J. Michael↗
NASA NTRS1982

Computer constructed imagery of distant plasma interaction boundaries

Computer constructed sketches of plasma boundaries arising from the interaction between the solar wind and the magnetosphere can serve as both didactic and research tools. In particular, the structure of the earth's bow shock can be represented as a nonuniform surfce according to the instantaneous orientation of the IMF, and temporal changes in structural distribution can be modeled as a sequence of sketches based on observed sequences of spacecraft-based measurements. Viewed rapidly, such a sequence of sketches can be the basis for representation of plasma processes by computer animation.

Greenstadt, E. W.↗
NASA NTRS1994

A survey of bidirectional greater than or equal to MeV ion flows during the Helios 1 and Helios 2 mission: Observations from the Goddard Space Flight Center instruments

A survey is made of 1.1-2.1 MeV and 3-21 MeV bidirectional ion flows (BIFs) in the solar wind at 0.3-1.0 AU observed by the Goddard Space Flight Center instruments on the Helios 1 and Helios 2 spacecraft during the spacecraft mission in 1974-1984 and 1979-1980, respectively. Some 774 events have been identified Helios 1, and 223 at Helios 2, with mean durations of approximately 2.5 hr at each spacecraft. BIFs were observed for approximately 1%-3% of the observation time during solar minimum conditions in 1975-1977 and for approximately 10%-14% in 1980-1981 around solar maximum. These occurrence rates are similar to those of approximately 1 MeV BIFs observed at the Interplanetary Monitoring Platform 8 and International Sun Earth Explorers (ISEE) 3 spacecraft, and of bidirectional electron heat fluxes at ISEE 3. Solar wind plasma parameters during BIFs were similar to those found generally during the Helios missions, though BIFs have a greater tendency to be associated with cool, low-beta plasma, moderately enhanced and low-variance magnetic fields, both less than 300 km/s and greater than 750 km/s solar wind. Solar wind features associated with the greater than 4 hr duration BIFs include clear plasma shock-driver signatures: approximately 36% of the events; postshock plasma, not associated with shock-driver signatures: approximately 13%; noncompressive density enhancements: approximately 22% (half associated with plasma proton temperature depression); high-speed streams not associated with shocks: approximately 10%; corotating interaction regions: approximately 5%; immediately upstream of shocks: approximately 5%. Around 8% were associated with other solar wind structures, while approximately 4% showed no associated structure. BIFs were present in several of the shock drivers associated with coronal mass ejections (CMEs) observed by the Solwind coronagraph during intervals when Helios 1 was off the limbs of the Sun, showing directly the association of some BIFs with CMEs. some BIFs with CMEs.

Richardson, I. G.↗
DOE OSTI2020

Thermo-Mechanical Shock, X-Ray Transport and Radiation Response Analysis Experiments on NIF

The study of x-ray induced rapid heating and the resulting material responses - (thermomechanical shock (TMS) and thermo-structural response (TSR)) - is important to our understanding of material behavior in extreme environments. A series of high conversion efficiency (XRCE) x-ray sources have been developed for the NIF laser facility ranging in fluence and spectral content. In conjunction with source development, we have developed a new XTRRA (X-ray Transport and Radiation Response Analysis) test cassette to hold a set of samples, each at equal distance from target chamber center (TCC) where the x-ray source is placed. Design and performance details of the x-ray sources is discussed elsewhere. Here, we describe the development and use of this TMS XTRRA test cassette. The XTRRA test cassette is a snout mounted on a NIF Diagnostic Instrument Manipulator (DIM) designed to position six samples equidistant from the x-ray source to assure uniform irradiation of all samples. Photon Displacement interferometry (PDI) is used to measure the displacement of the rear surface of each sample resulting from x-ray exposure on the front of the sample. This will help determine the x-ray generated impulse on the sample. The samples are retrieved from the snout after the shot for inspection and post-shot analysis including the measurement of sample ablated mass and engineering tests examining changes in the material structure. The data from experiments are compared to predictions from LLNL’s ASC codes and used to inform models implemented in these codes. Thus, XRCE x-ray sources with the XTRRA snout at the National Ignition Facility (NIF) laser at the Lawrence Livermore National Laboratory provide the ability to expose a broad range of material samples directly to high x-ray fluence, measure shock transits, and recover the sample for further analysis post-shot.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

TMS XTRRA experiments on NIF

The study of x-ray induced rapid heating and the resulting material responses - (thermomechanical shock (TMS) and thermo-structural response (TSR)) - is important to our understanding of material behavior in extreme environments. A series of high conversion efficiency (XRCE) x-ray sources have been developed for the NIF laser facility ranging in fluence and spectral content. In conjunction with source development, we have developed a new XTRRA (X-ray Transport and Radiation Response Analysis) test cassette to hold a set of samples, each at equal distance from target chamber center (TCC) where the x-ray source is placed. Design and performance details of the x-ray sources is discussed elsewhere. Here, we describe the development and use of this TMS XTRRA test cassette. The XTRRA test cassette is a snout mounted on a NIF Diagnostic Instrument Manipulator (DIM) designed to position six samples equidistant from the x-ray source to assure uniform irradiation of all samples. Photon Displacement interferometry (PDI) is used to measure the displacement of the rear surface of each sample resulting from x-ray exposure on the front of the sample. This will help determine the x-ray generated impulse on the sample. The samples are retrieved from the snout after the shot for inspection and post-shot analysis including the measurement of sample ablated mass and engineering tests examining changes in the material structure. The data from experiments are compared to predictions from LLNL’s ASC codes and used to inform models implemented in these codes. Thus, XRCE x-ray sources with the XTRRA snout at the National Ignition Facility (NIF) laser at the Lawrence Livermore National Laboratory [1,2] provide the ability to expose a broad range of material samples directly to high x-ray fluence, measure shock transits, and recover the sample for further analysis post-shot.

36 MATERIALS SCIENCE↗
NASA NTRS2008

Estimating Shock Spectra: Extensions beyond GEVS

Shock response spectra (SRS) are the standard description of some vibration environments on spacecraft for equipment qualification. For shock events produced by pyrotechnic devices, SRS can have significant frequency content as high as 10 kHz. It is difficult to construct and analyze finite element models that can resolve dynamic behavior at such high frequencies. GEVS provides simple, empirically based methods for approximating the SRS for a wide variety of shock events. It begins with a base SRS according to the type of pyrotechnic device, and then provides attenuation relations to adjust this SRS according to distance from the shock source, the type of structural frame and the properties of any structural joints between the source and equipment. In our paper we extend GEVS to include more detailed information about the spacecraft structure. To retain the general framework of GEVS, we begin with a base SRS and adjust this SRS using attenuation relations. We use modal and traveling wave concepts to derive the attenuation relations for simple canonical structures. Then we show how these concepts can be used to analyze more complex structures using finite element mode shapes to explicitly calculate the attenuation factors. Since the low- to mid-frequency finite element modal information is extrapolated to obtain the low- to high-frequency attenuation relations, the resulting attenuated SRS is formulated as an upper bound rather than as mean predicted values. We illustrate the extended GEVS approach by analyzing the impact response of composite tubes and the shock response of the STEREO spacecraft.

Igusa, Takeru↗
NASA NTRS1981

Measurements of a solar flare-generated shock wave at 13.1 R/0/

The first measurements of the structure of wind speed, electron density, and electron density fluctuations are reported for a shock wave propagating through the acceleration region of the solar wind. Radio scattering observations, consisting of spectral broadening, mean phase and amplitude scintillations, were made on August 18, 1979, 13.1 solar radii east of the sun near the ecliptic plane, using the 2.3 and 8.4 GHz radio signals of Voyager 1. The results show a shock wave speed of about 3,500 km/sec; which, when compared with average transit time speed to 1 AU, shows that substantial deceleration took place with outward propagation from the sun. This result is consistent with a blast wave.

Woo, R.↗
NASA NTRS1989

Model atmospheres with periodic shocks

The pulsation of a long-period variable star generates shock waves which dramatically affect the structure of the star's atmosphere and produce conditions that lead to rapid mass loss. Numerical modeling of atmospheres with periodic shocks is being pursued to study the processes involved and the evolutionary consequences for the stars. It is characteristic of these complex dynamical systems that most effects result from the interaction of various time-dependent processes.

Bowen, G. H.↗
NASA NTRS2023

Interpretation of Flat Energy Spectra Upstream of Fast Interplanetary Shocks

Interplanetary shocks are large-scale heliospheric structures often caused by eruptive phenomena at the Sun, and represent one of the main sources of energetic particles. Several interplanetary shock crossings by spacecraft at 1 AU have revealed enhanced energetic-ion fluxes that extend far upstream of the shock. Surprisingly, in some shock events, ion fluxes with energies between 100 keV and about 2 MeV acquire similar values (which we refer to as "overlapped'' fluxes), corresponding to flat energy spectra in that range. In contrast, closer to the shock, the fluxes are observed to depend on energy. In this work, we analyze three interplanetary shock-related energetic particle events observed by the Advanced Composition Explorer spacecraft where flat ion energy spectra were observed upstream of the shock. We interpret these observations via a velocity filter mechanism for particles in a given energy range. This reveals that low energy particles tend to be confined to the shock front and cannot easily propagate upstream, while high energy particles can. The velocity filter mechanism has been corroborated from observations of particle flux anisotropy by the Solid-State Telescope of Wind/3DP.

Shock waves↗
NASA NTRS1993

The small amplitude magnetohydrodynamic Riemann problem

The small-amplitude MHD Riemann problem is studied using the Cohen-Kulsrud-Burgers equations. Unlike the coplanar Riemann problem, the evolution of noncoplanar Riemann problems is not self-similar and its flow structures could change in time. But its large-time behavior is very simple and a time-dependent 2 - 3 intermediate shock is always involved for the noncoplanar field rotations. The time-dependent 2 - 3 intermediate shock has a well-defined structure and exists for any degree of field rotation.

Wu, C. C.↗
NASA NTRS2023

Interpretation of Flat Energy Spectra Upstream of Fast Interplanetary Shocks

Interplanetary shocks are large-scale heliospheric structures often caused by eruptive phenomena at the Sun, and represent one of the main sources of energetic particles. Several interplanetary (IP) shock crossings by spacecraft at 1 au have revealed enhanced energetic-ion fluxes that extend far upstream of the shock. Surprisingly, in some shock events ion fluxes with energies between 100 keV and about 2 MeV acquire similar values (which we refer to as "overlapped" fluxes), corresponding to flat energy spectra in that range. In contrast, closer to the shock the fluxes are observed to depend on energy. In this work, we analyze three IP-shock-related energetic particle events observed by the Advanced Composition Explorer spacecraft where flat ion energy spectra were observed upstream of the shock. We interpret these observations via a velocity-filter mechanism for particles in a given energy range. In particular, ions with velocity parallel to the local magnetic field larger than the speed of the upstream plasma, in the reference frame of the shock, can easily propagate back upstream, while lower-energy ions tend to be confined to the shock front, thus reducing their fluxes far upstream and giving rise to flat energy spectra. The velocity-filter mechanism has been corroborated from observations of particle flux anisotropy by the Solid-State Telescope of Wind/3DP.

Shock waves↗
DOE OSTI2025

Shock compression of additively manufactured high solids loaded polymer composites with aligned porosity

The effects of aligned porosity on the shock-compression response of additively manufactured (AM) composite structures with collinear and log-cabin geometries are investigated. The composites contain two inorganic and two organic particle populations and a UV-curable polymer binder. X-ray phase contrast imaging (X-PCI) is used as an in-material diagnostic in plate-impact experiments performed at the Dynamic Compression Sector of the Advanced Photon Source at the Argonne National Laboratory. Macroscale shock and particle velocities and microscale pore collapse velocities are measured from X-PCI images obtained from samples impacted in various orientations relative to the AM build directions. The linear shock and particle velocity relation for the structures with collinear build geometry shows directional differences, with the build direction exhibiting the highest slope and the filament print direction having the shallowest slope. Composites with log-cabin geometry, due to their slightly lower porosity and smaller sized pores, show higher shock velocities than the collinear structures at the same particle velocity. Microscale directionality effects are also observed, with the pore collapse velocity dependent on the pore configuration. Specifically, the pore collapse velocity is highest for pores elongated along the impact direction which is the case for the colinear structures impacted in the filament print direction, which is consistent with the directionality trend observed in the data for the shock and particle velocity equation of state. The pore collapse velocity approaches ∼80 % of the shock velocity and is several times the average bulk particle velocity, suggesting a highly hydrodynamic mechanism of pore collapse. Overall, both the macroscale response as measured by the shock and particle velocity relationship, and the microscale response as measured by the pore collapse velocity, are found to be anisotropic and dependent on the AM composite structure.

Wagner, K. B. [Georgia Institute of Technology, At↗
NASA NTRS1982

Shock disturbance of the I-Xe system

Three separate samples of the meteorite Bjurbole were artificially shocked at pressures of 70 kb, 200 kb, and 400 kb. Analysis of xenon released in stepwise heating shows that the I-Xe system of the 400 kb sample is substantially altered by the shock loading, and it is no longer possible to infer an age or trapped xenon composition for that sample. The 200-kb and 70-kb samples display isotopic structures progressively less altered demonstrating the gradations in shock disturbance likely to be found in natural systems. Interpretations of the I-Xe and Ar-40-Ar-39 systems for several naturally shocked meteorites are also presented. New data for Arapahoe do not confirm the previously reported age and trapped xenon composition, demonstrating instead that its I-Xe structure has been strongly disturbed by shock.

Caffee, M. W.↗
NASA NTRS1974

The X-ray spectra of the Vela and Puppis supernova remnants and the shock-wave model of supernova remnants

The structure and spectrum of the Vela and Puppis supernova remnants (SNRs) were observed in soft (0.1 to 1.5 keV) X rays from a rocket. The spectral data of both objects below 1.5 keV are consistent with thermal radiation from a hot plasma and are not consistent with a simple power-law function. Fitting the data to a Tucker-Koren model results in values of T = (4.3 plus or minus 0.3) x 1,000,000 K for Vela and T = (7 plus or minus 1) x 1,000,000 K for Puppis. The present data, earlier data from the Cygnus Loop, and results on Cas A and Tycho reported by others are considered within the context of a simple model in which X rays are thermally produced as a result of a shock wave expanding into the interstellar medium. X-ray data on the temperature, intrinsic diameter, and intrinsic luminosity of the five SNRs are used to compute the age, energy release, and initial interstellar density for each one. From measurements of X-ray absorption along the line of sight, and also from shock-wave model interpretations of temperature-diameter-luminosity relations, it is concluded that the average density of interstellar material is about 0.1 per cu cm between the sun and the nearest X-ray emitting SNR, Vela.

Gorenstein, P.↗
NASA NTRS1992

Relativistic, perpendicular shocks in electron-positron plasmas

One-dimensional particle-in-cell plasma simulations are used to examine the mechanical structure and thermalization properties of collisionless relativistic shock waves in electron-positron plasmas. Shocks propagating perpendicularly to the magnetic field direction are considered. It is shown that these shock waves exist, and that they are completely parameterized by the ratio of the upstream Poynting flux to the upstream kinetic energy flux. The way in which the Rankine-Hugoniot shock jump conditions are modified by the presence of wave fluctuations is shown, and they are used to provide a macroscopic description of these collisionless shock flows. The results of a 2D simulation that demonstrates the generality of these results beyond the assumption of the 1D case are discussed. It is suggested that the thermalization mechanism is the formation of a synchrotron maser by the coherently reflected particles in the shock front. Because the downstream medium is thermalized, it is argued that perpendicular shocks in pure electron-positron plasmas are not candidates as nonthermal particle accelerators.

Gallant, Yves A.↗