Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SWIFT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Status of the Dielectric Constant of Sea Water at L-Band for Remote Sensing of Salinity

The model expressing the dielectric constant of sea water at microwave frequencies as a function of salinity and temperature is an important element in remote sensing of sea surface salinity. It is also important independently as a description of the physical properties of salt water. A major milestone was the development in the late 1970s by Klein and Swift of a model based on laboratory measurements at L- and S-band and a functional form supported by theory for polar molecules and previous work on freshwater. Much of the subsequent work has focused on measurements at higher frequency and determining model parameters tuned to apply for applications, such as remote sensing of sea surface temperature (SST). Interest in the dielectric constant at 1.4 GHz (L-band) increased again with the development of soil moisture ocean salinity (SMOS) and Aquarius to measure salinity from space, but there have been few new measurements at L-band and often confusion regarding the applicability of new models at 1.4 GHz. The objective of this article is to compare available models in the context of how well they represent the dielectric constant of sea water at 1.4 GHz. Among the criteria applied will be the recent measurements at the George Washington University of the dielectric constant at 1.4 GHz

Microwave Remote Sensing↗
NASA NTRS2023

First Detection of X-Ray Polarization from the Accreting Neutron Star 4U 1820−303

This paper reports the first detection of polarization in the X-rays for atoll-source 4U 1820−303, obtained with the Imaging X-ray Polarimetry Explorer (IXPE) at 99.999% confidence level (CL). Simultaneous polarimetric measurements were also performed in the radio with the Australia Telescope Compact Array. The IXPE observations of 4U 1820−303 were coordinated with Swift X-ray Telescope, Neutron Star Interior Composition Explorer, and Nuclear Spectroscopic Telescope Array aiming to obtain an accurate X-ray spectral model covering a broad energy interval. The source shows a significant polarization above 4 keV, with a polarization degree of 2.0% ± 0.5% and a polarization angle of −55° ± 7° in the 4–7 keV energy range, and a polarization degree of 10% ± 2% and a polarization angle of −67° ± 7° in the 7–8 keV energy bin. This polarization also shows a clear energy trend with polarization degree increasing with energy and a hint for a position-angle change of ≃90° at 96% CL around 4 keV. The spectro-polarimetric fit indicates that the accretion disk is polarized orthogonally to the hard spectral component, which is presumably produced in the boundary/spreading layer. We do not detect linear polarization from the radio counterpart, with a 3σ upper limit of 50% at 7.25 GHz.

4U1820-303↗
NASA NTRSDate not supplied

Mrk 421: 2 Weeks of Multi-Wavelength Monitoring with IXPE

At z=0.03, Mrk 421 is one of the closest Blazars and hence an exceptional target for X-ray polarization. In December of 2023, IXPE monitored Mrk 421 for approximately two weeks, in order to investigate the possible origins of X-ray polarization variability previously seen in this target, and whether it might originate in a shock propagating through the field lines of an energy-stratified jet. We present the results of the IXPE campaign, which is also complemented by NuSTAR, XMM-Newton, Swift, and ground-based monitoring.

IXPE↗
NASA NTRSDate not supplied

Spectral Measurement Errors due to CCD Serial Pixel-to-Pixel Readout Interference in the Ocean Color Instrument of the NASA PACE Mission

The Ocean Color Instrument on NASA’s PACE mission is a hyperspectral imager with a spatial resolution of 1km x 1km and spectral resolution of 5nm in 2.5nm steps over 320-890nm. The detection system is based on two Charge-Coupled Devices (CCDs) operating in Time Delay Integration (TDI) mode to achieve high signal-to-noise ratio. The front-end optical imager is a rotating mirror-based system that images the ground-scene onto a slit with a field of view of 16km x 1km. The slit-image is re-imaged and wavelength dispersed on the CCDs. As the ground-scene moves through the slit, it moves along the CCD columns as charge is moved along with it. The accumulated charge at the end of each column is collected in a serial pixel. Each of the 16 CCD outputs read out 32 columns of the same ground scene spaced 0.625nm apart. The 32-pixel serial register is swiftly read out before the next TDI cycle. The telescope is spinning at 5.77Hz to achieve the required spatial resolution. This results in a serial pixel readout speed of 8.5MHz. Each serial read-cycle goes through a reset and video period that are each sampled to create a low-noise correlated double sample value. This only allows 59ns for the reset and video to be asserted and settled before sampling. Due to the short time period, the response of the CCD exhibits serial pixel-to-pixel readout interference as the reset and video signals do not have time to fully settle before sampling. Each serial pixel value therefore has a dependence on the value of the preceding pixel value. This leads to a spectral measurement error of up to 0.3%. We explain the operation of the detection system, the behavior of the interference and the resulting wavelength error with results from ground testing and on-orbit characterization.

Ulrik B Gliese↗
NASA NTRSDate not supplied

Uneven Inflation Load Share Trends in Clusters

The use of parachute clusters for payload recovery is still seeing widespread use ever since the early days of WWII. By involving the (near) simultaneous deployment of several smaller and identical canopies connected to the payload, cluster systems offer flexibility in tailoring to needed descent rates and load management, as well as providing robustness against individual canopy deployment or opening failure. Their downside, of course, resides in the possibility of differing inflation rates by each cluster member as caused by deployment variability, canopy-to-canopy interference, etc. Such variability leads to the lead-lag phenomenon, which causes uneven loading among the parachutes, often times leaving a single canopy to take up a significant portion of the system’s inflation loads. Herein we investigate how serious such an effect can be in terms of the number N of cluster members, underinflation drag of the lagging canopies, inflation swiftness of the leader in comparison to the laggards’, disreefing cutter activation staggering and pre-disreefing drag area. Two new metrics are used to highlight load share unevenness, namely, the peak and average leader canopy riser load in comparison to the leader’s drag during no-lead-lag; and leader peak load, as compared to total peak load. Results are calculated from data collected in NASA’s Orion/CPAS test program, as well as from simple algebraic expressions informing leader drag as sustained in different cluster systems (i.e., of different N) and varying leader inflation time relative to the laggards. Generally, using large-N cluster systems confers better load sharing among canopies. However, and in deployments where significant lead-lag occur, large-N systems may feature greater leader overload excursions, oftentimes in excess of 50% the no-lead-lag levels. These excursions are particularly made worse when cutter activation among the members are far from simultaneous and the laggards’ pre-disreefing drag area is small in comparison to the leader’s.

parachutes↗
NASA NTRSDate not supplied

UAS Payload Design for In-Situ Smoke Plume Sensing

To aid in the detection of harmful aerosols and trace gases emitted in wildfires and prescribed burns, we are designing a smoke-specific payload which can be flown on the Black Swift S2™ Uncrewed Aerial System (UAS) platform. The payload will be custom and mounted within the nosecone, equipped with a trace gas sensor suite and particle spectrometer for characterization of wildfire and prescribed burn emissions. This data will aid in the improvement of HYSPLIT3 modeling to make more informed decisions regarding prescribed burns, particularly for mountain valleys in the Pacific Northwest. The trace gas suite will be composed of 8 low-cost trace gas sensors (CH4, CO2, CO, HCN, NO2, NO, O3, and Volatile Organic Compounds (VOCs)). Portable Optical Particle Spectrometer (POPS) measures particle size range between 0.14 to 3 µm, which is crucial for assessing public health impact, air quality, and visibility.

Henry Miller↗
NASA NTRSDate not supplied

Mrk 421: Two Weeks of Multi-Wavelength Monitoring with IXPE

At z=0.03, Mrk 421 is one of the closest Blazars and hence an exceptional target for X-ray polarization. In December of 2023, IXPE monitored Mrk 421 for approximately two weeks, in order to investigate the possible origins of X-ray polarization variability previously seen in this target, and whether it might originate in a shock propagating through the field lines of an energy-stratified jet. We present the results of the IXPE campaign, which is also complemented by NuSTAR, XMM-Newton, Swift, and ground-based monitoring.

IXPE↗
NASA NTRS2024

The Mega-MUSCLES Treasury Survey: X-Ray to Infrared Spectral Energy Distributions of a Representative Sample of M Dwarfs

We present 5–1 × 107 Å spectral energy distributions (SEDs) for 12 M dwarf stars covering spectral types M0–M8. Our SEDs are provided for community use as a sequel to the Measurements of the Ultraviolet Spectral Characteristics of Low-mass Exoplanetary Systems (MUSCLES) survey. The 12 stars include eight known exoplanet hosts and four stars chosen to fill out key parameter space in spectral type and rotation period. The SEDs are constructed from Hubble Space Telescope ultraviolet spectroscopy and XMM Newton, Chandra, and/or Swift X-ray observations, and completed with various model data, including Lyα reconstructions, PHOENIX optical models, APEC coronal models, and differential emission measure models in the currently-unobservable extreme ultraviolet. We provide a complete overview of the Mega-MUSCLES program, including a description of the observations, models, and SED construction. The SEDs are available as MAST high-level science products and we describe the various data products here. We also present ensemble measurements from our sample that are of particular relevance to exoplanet science, including the high-energy fluxes in the habitable zone and the farultraviolet to near-ultraviolet ratio. Combined with MUSCLES, Mega-MUSCLES provides SEDs covering a wide range of M dwarf spectral types and ages such that suitable proxies for any M dwarf planet host of interest may be found in our sample. However, we find that ultraviolet and X-ray fluxes can vary even between stars with similar parameters, such that observations of each exoplanet host star will remain the gold standard for interpreting exoplanet atmosphere observations.

David J. Wilson↗
DOE OSTI2023

Primal-Dual Differentiable Programming for Distribution System Critical Load Restoration: Preprint

Swift and reliable critical load restoration (CLR) can help make a distribution system resilient towards extreme events. To optimally achieve that, alongside practical concerns such as limiting online computational burden, some studies leverage model-free reinforcement learning (RL) to train control policies. Despite the advantages provided by RL algorithms, these approaches suffer from two issues: 1) the lack of a proper mechanism for constraint enforcement, and 2) poor sample efficiency. Therefore, in this paper, a primal-dual differentiable programming (PDDP) method is developed for guiding the training leading to a constraint-satisfying policy. Additionally, the model-based nature of the proposed method aims at improving sample efficiency. The experiment on a CLR problem demonstrates that PDDP can effectively train a control policy that both achieves desirable performance and satisfies required constraints.

differentiable programming↗
DOE OSTI2023

Black Start of Unbalanced Microgrids Harmonizing Single- and Three-Phase Grid-Forming Inverters: Preprint

As power systems are transforming with increasing penetrations of inverter-based resources (IBRs), system restoration using IBRs has drawn attention. Using distributed grid-forming (GFM) assets located near critical loads, either three-phase or single-phase, to establish microgrid voltages in the absence of a bulk grid, a distribution system could obtain high system survivability. For swift and secure recovery of a critical load in a single-phase lateral, local single-phase GFM inverters can form a microgrid, and then it can be combined with a neighbouring grid with the inverters remaining in GFM mode for voltage and frequency regulation until the bulk grid comes online. It leads to dynamic interoperation of single-phase GFM inverters with three-phase ones in the black start process. This paper studies the novel approach with electromagnetic transient (EMT) simulations. To evaluate the potential and the technical challenges of the heterogeneous IBR-driven black start, three-phase and single-phase GFM inverter models are developed, including negative-sequence control for voltage balance and a phase-by-phase current limiter (three-phase) and current magnitude limiter (single-phase). To examine dynamic aspects of the black-start process, the EMT simulation also models transformer and motor dynamics emulating their inrush and startup behavior as well as network dynamics. Involvement of grid-following assets to facilitate the black-start process is also modeled. By allowing multiple GFM inverters to collectively black start without leader-follower coordination, regardless of phases, a system can achieve extreme resilience. An inverter-driven black start of a heavily unbalanced 2-MVA distribution feeder using 1 three-phase and 3 single-phase GFM inverters is demonstrated. The simulation shows the heterogeneous system can maintain stability with the single-phase GFM dynamics coupled with the three-phase one.

grid-forming inverter↗
DOE OSTI2023

An Agenda for Multimodal Foundation Models for Earth Observation

Archives of remote sensing (RS) data are increasing swiftly as new sensing modalities with enhanced spatiotemporal resolution become operational. While promising new breakthroughs, the sheer volume of RS archives stretches the limits of human analysts and existing AI tools, as most models are: i) limited to single data modalities; ii) task-specific; iii) heavily reliant on labeled data. The emerging Foundation Models (FMs) have the potential to address these limitations. Trained on vast unlabeled datasets through self-supervised learning, FMs enable generic feature extraction that facilitate specialization to a wide variety of downstream tasks. This paper describes a vision towards an FM for multimodal Earth Observation data (FM4EO), discussing key building blocks and open challenges. We put particular emphasis on multimodal reasoning, a topic underexplored in EO. Our ultimate goal is a practical path toward FM4EO with capacity to unlock breakthroughs in few-shot learning scenarios, multimodal geographic knowledge integration, synthesis, and hypothesis generation.

Ambrozio Dias, Philipe↗
DOE OSTI2019

Nuclear Crisis Communication in an Era of Fake News and Media Overload - 19414

Over the past several decades, the nuclear industry has worked diligently to improve the security and safety aspects of their technology, but it has failed to meet the challenge of the public's negative perception. Studies have shown that nuclear energy and nuclear waste evoke fear among the general populace because people see risks as immediate, unknown, uncontrollable, and potentially catastrophic. To some extent, negative public perception challenges for the nuclear industry are primarily a consequence of its own inability to communicate the benefits of nuclear science effectively with the lay public. While effective and trustworthy communication cannot guarantee success, it helps shape public opinion, and for a routinely misperceived project like a nuclear facility, that is paramount. Fukushima was the first nuclear accident to occur in the world where citizens have access to 24/7 news channels and the ability to respond in a real-time manner through social media outlets. Following the Fukushima accident, social media sites were filled with information regarding nuclear energy that were based more on mass rumor and even paranoia than facts. More locally, we have seen this trend following what was a minor external radiation release event at the WIPP in February 14, 2014. Many online news sources were flooded with anti-nuke stories aimed at pushing a fear of radiation, such as inferring an increase in cancer rates among the public from this minor incident; which was exactly the opposite of what was true. Today, when the public gets its news from social media and online sources, people are faced with rapidly changing and contrasting interpretations of the same story, depending on when they accessed the latest news. They are also increasingly vulnerable to fake news, including disinformation deliberately planted and cultivated by the anti-nuclear movement. Public reactions following these nuclear events reinforced the value of effective communication in maintaining the high level of transparency necessary for long-term, local acceptance and support for nuclear facilities. A lack of trustworthy communication leaves a vacuum that can be quickly filled by rumors and fake information. When dealing with a nuclear crisis, failure to recognize the rapidly changing and contrasting media framing, or believing fake news could have very real and catastrophic consequences. Trusted organizations must swiftly take charge and guide the way in which the crisis is framed to keep the public adequately and accurately informed. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2023

INL Alpha Radiation Background Study

During a radiological emergency, swift determination of the extent and intensity of the radiological materials that have been released to the environment are important for decision makers to correctly assess the hazards and recommend protective actions. In a radiological emergency, natural background counts need to be subtracted from the total activity for the actual amount of activity present to be assessed. This study provides documented survey results of the soils in and around the INL using instrumentation utilized by field monitoring teams that support the INL. Over three hundred alpha background counts were taken. The average alpha background count rate on portable instruments in use by field monitoring teams is 5 counts per minute and the decision level for activity that should be considered as having activity greater than background is 10 counts per minute. It was also shown that rain or snow can increase the background and its effects are difficult to quantify.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2025

A Joint Search for the Electromagnetic Counterpart to the Gravitational-Wave Binary Black-Hole Merger Candidate S250328ae with the Dark Energy Camera and the Prime Focus Spectrograph

The first detection of an optical counterpart to a gravitational wave signal revealed that collaborative efforts between instruments with different specializations provide a unique opportunity to acquire impactful multi-messenger data. We present results of such a joint search with the Dark Energy Camera (DECam) and Prime Focus Spectrograph (PFS) for the optical counterpart of the LIGO-Virgo-KAGRA event S250328ae, a binary black hole merger candidate of high significance detected at a distance of 511$\pm$82 Mpc and localized within an area of 3 (15) square degrees at 50% (90%) confidence. We observed the 90% confidence area with DECam and identified 36 high-confidence transient candidates after image processing, candidate selection, and candidate vetting. We observed with PFS to obtain optical spectra of DECam candidates, Swift-XRT candidates, and potential host galaxies of S250328ae. In total, 3897 targets were observed by seven pointings covering ~50% of the 90% confidence area. After template fitting and visual inspection, we identified 12 SNe, 159 QSOs, 2975 galaxies, and 131 stars. With the joint observations of DECam and PFS, we found variability in 12 SNe, 139 QSOs, 37 galaxies, and 2 stars. We do not identify any confident optical counterparts, though the association is not ruled out for three variable candidates that are not observed by PFS and 6 QSO candidates without clear variability if the optical counterpart of S250328ae is faint. Despite the lack of confident optical counterparts, this paper serves as a framework for future collaborations between wide-field imagers and multi-object spectrographs to maximize multi-messenger analyses.

Zhang, Haibin [Natl. Astron. Observ. of Japan] (OR↗
DOE OSTI2025

Toward Fullerene-Free PIN Perovskite Solar Cells

We highlight opportunities for a transformative shift in perovskite solar cell design by expanding electron transport layers (ETLs) beyond fullerenes. Fullerenes have known limitations, including constraints on open-circuit voltage, stability, and mechanical integrity. Recently, fullerene-free p-i-n cells with power conversion efficiencies exceeding 25% have been demonstrated via both naphthalene diimide-SnO x bilayers and nonfullerene acceptor-based ETLs. Despite successes, fullerenes remain the de facto ETLs for perovskites. Drawing lessons from organic photovoltaics, where it took decades to transition from fullerenes to more broadly available and efficient materials, we explore pathways to accelerate the development and adoption of fullerene-free ETLs. This requires understanding the similarities and differences between organic and perovskite solar cells, which will necessitate carefully designing fullerene replacements with both, high efficiency and also, critically, durability under operation. Here, we incorporate literature data to facilitate comparisons, and independently conduct fracture energy measurements for alternative ETL configurations to motivate their adoption.

14 SOLAR ENERGY↗
DOE OSTI2021

Modeling the electrical double layer at solid-state electrochemical interfaces

Models of the electrical double layer (EDL) at electrode/liquid-electrolyte interfaces no longer hold for all-solid-state electrochemistry. Here we show a more general model for the EDL at a solid-state electrochemical interface based on the Poisson–Fermi–Dirac equation. By combining this model with density functional theory predictions, the interconnected electronic and ionic degrees of freedom in all-solid-state batteries, including the electronic band bending and defect concentration variation in the space-charge layer, are captured self-consistently. Along with a general mathematical solution, the EDL structure is presented in various materials that are thermodynamically stable in contact with a lithium metal anode: the solid electrolyte Li 7 La 3 Zr 2 O 12 (LLZO) and the solid interlayer materials LiF, Li 2 O and Li 2 CO 3 . Here, the model further allows design of the optimum interlayer thicknesses to minimize the electrostatic barrier for lithium ion transport at relevant solid-state battery interfaces.

25 ENERGY STORAGE↗