Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Combined Hydrous Ferric Oxide and Quaternary Ammonium Surfactant Tailoring of Granular Activated Carbon for Concurrent Arsenate and Perchlorate Removal

Activated carbon was tailored with both iron and quaternary ammonium surfactants so as to concurrently remove both arsenate and perchlorate from groundwater. The iron (hydr)oxide preferentially removed the arsenate oxyanion but not perchlorate; while the quaternary ammonium preferentially removed the perchlorate oxyanion, but not the arsenate. The co-sorption of two anionic oxyanions via distinct mechanisms has yielded intriguing phenomena. Rapid small-scale column tests (RSSCTs) with these dually prepared media employed synthetic waters that were concurrently spiked with arsenate and perchlorate; and these trial results showed that the quaternary ammonium surfactants enhanced arsenate removal bed life by 25-50% when compared to activated carbon media that had been preloaded merely with iron (hydr)oxide; and the surfactant also enhanced the diffusion rate of arsenate per the Donnan effect. The authors also employed natural groundwater from Rutland, MA which contained 60 microg/L As and traces of silica, and sulfate; and the authors spiked this with 40 microg/L perchlorate. When processing this water, activated carbon that had been tailored with iron and cationic surfactant could treat 12,500 bed volumes before 10 microg/L arsenic breakthrough, and 4500 bed volumes before 6 microg/L perchlorate breakthrough. Although the quaternary ammonium surfactants exhibited only a slight capacity for removing arsenate, these surfactants did facilitate a more favorably positively charged avenue for the arsenate to diffuse through the media to the iron sorption site (i.e. via the Donnan effect).

36 MATERIALS SCIENCE↗

Mercury Removal from Contaminated Water by Wood-Based Biochar Depends on Natural Organic Matter and Ionic Composition

Biochars can remove potentially toxic elements, such as inorganic mercury [Hg(II)] from contaminated waters. However, their performance in complex water matrices is rarely investigated, and the combined roles of natural organic matter (NOM) and ionic composition in the removal of Hg(II) by biochar remain unclear. Here, we investigate the influence of NOM and major ions such as chloride (Cl – ), nitrate (NO 3 – ), calcium (Ca 2+ ), and sodium (Na + ) on Hg(II) removal by a wood-based biochar (SWP700). Multiple sorption sites containing sulfur (S) were located within the porous SWP700. In the absence of NOM, Hg(II) removal was driven by these sites. Ca 2+ bridging was important in enhancing removal of negatively charged Hg(II)-chloro complexes. In the presence of NOM, formation of soluble Hg-NOM complexes (as seen from speciation calculations), which have limited access to biochar pores, suppressed Hg(II) removal, but Cl – and Ca 2+ could still facilitate it. The ability of Ca 2+ to aggregate NOM, including Hg-NOM complexes, promoted Hg(II) removal from the dissolved fraction (<0.45 μm). Hg(II) removal in the presence of Cl – followed a stepwise mechanism. Weakly bound oxygen functional groups in NOM were outcompeted by Cl – , forming smaller-sized Hg(II)-chloro complexes, which could access additional intraparticle sorption sites. Therein, Cl – was outcompeted by S, which finally immobilized Hg(II) in SWP700 as confirmed by extended X-ray absorption fine structure spectroscopy. We conclude that in NOM containing oxic waters, with relatively high molar ratios of Cl – : NOM and Ca 2+ : NOM, Hg(II) removal can still be effective with SWP700.

54 ENVIRONMENTAL SCIENCES↗

Iron Isotope Fractionation during Fe(II) Oxidation Mediated by the Oxygen-Producing Marine Cyanobacterium Synechococcus PCC 7002

In this study, we couple iron isotope analysis to microscopic and mineralogical investigation of iron speciation during circumneutral Fe(II) oxidation and Fe(III) precipitation with photosynthetically produced oxygen. In the presence of the cyanobacterium Synechococcus PCC 7002, aqueous Fe(II) (Fe(II) aq ) is oxidized and precipitated as amorphous Fe(III) oxyhydroxide minerals (iron precipitates, Fe ppt ), with distinct isotopic fractionation (ε 56 Fe) values determined from fitting the δ 56 Fe(II) aq (1.79‰ and 2.15‰) and the δ 56 Fe ppt (2.44‰ and 2.98‰) data trends from two replicate experiments. Additional Fe(II) and Fe(III) phases were detected using microscopy and chemical extractions and likely represent Fe(II) and Fe(III) sorbed to minerals and cells. The iron desorbed with sodium acetate (FeNaAc) yielded heavier δ 56 Fe compositions than Fe(II) aq . Modeling of the fractionation during Fe(III) sorption to cells and Fe(II) sorption to Feppt, combined with equilibration of sorbed iron and with Fe(II) aq using published fractionation factors, is consistent with our resulting δ 56 FeNaAc. The δ 56 Fe ppt data trend is inconsistent with complete equilibrium exchange with Fe(II)aq. Because of this and our detection of microbially excreted organics (e.g., exopolysaccharides) coating Feppt in our microscopic analysis, we suggest that electron and atom exchange is partially suppressed in this system by biologically produced organics. These results indicate that cyanobacteria influence the fate and composition of iron in sunlit environments via their role in Fe(II) oxidation through O 2 production, the capacity of their cell surfaces to sorb iron, and the interaction of secreted organics with Fe(III) minerals.

54 ENVIRONMENTAL SCIENCES↗

Exponential Water Uptake in Ionomer Membranes Results from Polymer Plasticization

Water content is the most influential factor in the performance of ion-exchange membranes (IEMs), controlling their mechanical rigidity, ionic conductivity, and degradation rates. Membranes absorb water exponentially at high water activity (a w ), making that region of the sorption isotherm the most influential on membrane properties. Plasticization of the polymer by water has been proposed to cause this exponential uptake at high a w . However, an integrated microscopic picture of the structure, thermodynamic, and mechanical properties of IEMs as a function of a w has remained elusive. In this work, we use large-scale molecular simulations validated with experimental measurements to compute the sorption isotherms, Young’s modulus, polymer dynamics, and structure of IEMs. The simulations unveil that the exponential increase in water uptake (WU) coincides in all cases with the glass to rubber transition of the membrane, as measured through its Young’s modulus and segmental polymer dynamics. Functionalization of the polymer with alkyl groups further contributes to its plasticization, increasing the WU at a given a w and ion-exchange capacity (IEC). The alkyl chains act synergistically with water to plasticize the polymer matrix and allow water penetration in the membrane. The simulations reveal that the width of the water channels depends on the ratio λ of water to ions in the polymer but is independent of its IEC. We conclude that differences in the polymer matrix–not the water channels–are responsible for the distinct uptake response of IEMs to the thermodynamic driving force of water activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lead Adsorption and Desorption at the Barite (001) Surface in the Presence of EDTA

Scaling minerals, such as barite, can cause detrimental consequences for oil/gas pipelines and water systems, but their formation can be inhibited by organic chelators such as ethylenediaminetetraacetic acid (EDTA). Here, we resolve how EDTA affects sorption and desorption of Pb at the barite (001) surface using a combination of X-ray scattering and microscopy measurements. In the presence of EDTA, Pb incorporated in the topmost part of the barite surface and adsorbed as inner-sphere complexes on the surface. In barite saturated solutions containing [Pb] ≥ 100 μM, overgrowth films grew along step edges. These films were exclusively monolayer thick, indicating that their growth was a self-limiting process. Approximately half of the Pb was removed after 14.5 h reaction with a Pb-free EDTA solution where most of the desorption occurred to adsorbed Pb rather than incorporated Pb. Dissolution proceeded primarily via step retreat and etch pit formation in EDTA, but in deionized water, the secondary phase was quickly removed within 3 min. Together these results suggest EDTA binds to both the surface and Pb in solution, which limits Pb sorption. However, EDTA binding to the surface also inhibits removal of the secondary phase that formed at higher Pb concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evaluation of a Third Generation Single-Component Water-Lean Diamine Solvent for Post-Combustion CO 2 Capture

Here this study describes a comprehensive evaluation of a recently developed water-lean diamine solvent, N1-(2-ethoxyethyl)-N2, N2-diisopropylethane-1,2-diamine (2-EEDIPEDA), to probe its potential post-combustion CO 2 capture performance. This evaluation includes (1) fundamental sorption characterization such as vapor-liquid equilibria, sorption kinetics and viscosity impacts; (2) continuous capture characterization using laboratory scale flow system using flue gas simulant; as well as (3) technoeconomic analysis of the capture process at industrial scale with projections for critical capture performance metrics. Using this evaluation, we compare the performance of 2-EEDIPEDA to our current leading water-lean amine-based solvent, 2-EEMPA, using the same baseline process plant configuration/pricing. From this comparison, we observe lower total cost of capture as low as $46.8/tonne CO 2 with 2-EEDIPEDA (20% cheaper than CANSOLV), as a direct result of solvent chemistry tuning leading to notable cost savings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid Removal of Mercury from Aqueous Solutions Using Thiol Functionalized Zn-doped Biomagnetite Nanoparticles

The surfaces of Zn-doped biomagnetite nanostructured particles were functionalized with (3-mercaptopropyl)trimethoxysilane (MPTMS) and used as a high-capacity and collectable adsorbent for the removal of Hg(II) from water. Fourier transform infrared spectroscopy (FTIR) confirmed the attachment of MPTMS on the particle surface. The crystallite size of the Zn-doped biomagnetite was {approx}17 nm, and the thickness of the MPTMS coating was {approx}5 nm. Scanning transmission electron microscopy and dynamic light scattering analyses revealed that the particles formed aggregates in aqueous solution with an average hydrodynamic size of 826 {+-} 32 nm. Elemental analyses indicate that the chemical composition of the biomagnetite is Zn{sub 0.46}Fe{sub 2.54}O{sub 4}, and the loading of sulfur is 3.6 mmol/g. The MPTMS-modified biomagnetite has a calculated saturation magnetization of 37.9 emu/g and can be separated from water within a minute using a magnet. Sorption of Hg(II) to the nanostructured particles was much faster than other commercial sorbents, and the Hg(II) sorption isotherm in an industrial wastewater follows the Langmuir model with a maximum capacity of {approx}416 mg/g, indicating two -SH groups bonded to one Hg. This new Hg(II) sorbent was stable in a range of solutions, from contaminated water to 0.5 M acid solutions, with low leaching of Fe, Zn, Si, and S (<10%).

36 MATERIALS SCIENCE↗

Stability of the bituminous coal microstructure upon exposure to high pressures of helium

Small-angle neutron scattering (SANS) and ultra-small-angle neutron scattering (USANS) measurements of the structure of two Australian bituminous coals (particle size of 1-0.5 mm) before, during, and after exposure to 155 bar of helium were made to identify any effects of pressure alone on the pore size distribution of coal and any irreversible effects upon exposure to high pressures of helium in the pore size range from 3 nm to 10 {mu}m. No irreversible effects upon exposure were identified for any pore size. No effects of pressure on pore size distribution were observed, except for a small effect at a pore size of about 2 {mu}m for one coal. This study provides a convenient baseline for SANS and USANS investigations on sorption of gases at elevated pressures on coals, by distinguishing between the effect of pressure alone on coal pore size distribution and against the effect of the gas to be investigated. 35 refs., 5 figs., 1 tab.

01 COAL, LIGNITE, AND PEAT↗

Phosphate Removal by Anion Binding on Functionalized Nanoporous Sorbents

Phosphate was captured from aqueous solutions by cationic metal-EDA complexes anchored inside mesoporous silica MCM-41 supports (Cu(II)-EDA-SAMMS and Fe(III)-EDA-SAMMS). Fe-EDA-SAMMS was more effective at capturing phosphate than the Cu-EDA-SAMMS and was further studied for matrix effects (e.g., pH, ionic strength, and competing anions) and sorption performance (e.g., capacity and rate). The adsorption of phosphate was highly pH dependent; it increased with increasing pH from 1.0 to 6.5, and decreased above pH 6.5. The adsorption was affected by high ionic strength (0.1 M of NaCl). In the presence of 1000-fold molar excess of chloride and nitrate anions, phosphate removal by Fe-EDA-SAMMS was not affected. Slight, moderate and large impacts were seen with bicarbonate, sulfate and citrate anions, respectively. The phosphate adsorption data on Fe-EDA-SAMMS agreed well with the Langmuir model with the estimated maximum capacity of 43.3 mg/g. The material displayed rapid sorption rate (99% of phosphate removal within 1 min) and lowering the phosphate content to ~ 10 µg/L of phosphorus, which is lower than the EPA’s established freshwater contaminant level for phosphorous (20 µg/L).

54 ENVIRONMENTAL SCIENCES↗

Multiscale Assessment of Methylarsenic Reactivity in Soil. 2. Distribution and Speciation in Soil

Methylated forms of arsenic (As), monomethylarsenate (MMA) and dimethylarsenate (DMA), have historically been used as herbicides and pesticides. Because of their large application to agriculture fields and the toxicity of MMA and DMA, the distribution, speciation, and sorption of methylated As to soils requires investigation. Monomethylarsenate and DMA were reacted with a soil up to one year under aerobic and anaerobic conditions. Microsynchrotron based X-ray fluorescence ({mu}-SXRF) mapping studies showed that MMA and DMA were heterogeneously distributed in the soil and were mainly associated with iron oxyhydroxides, e.g., goethite, in the soil. Micro-X-ray absorption near edge structure (XANES) spectra collected from As hotspots showed MMA and DMA were demethylated to arsenate over one year incubation under aerobic conditions. Monomethylarsenate was methylated to DMA, and DMA was maintained as DMA over a 3 month incubation under anaerobic conditions. Arsenic-iron precipitation, such as the formation of scorodite (FeAsO{sub 4} {center_dot} 2H{sub 2}O), was not observed, indicating that MMA and DMA were mainly associated with Fe-oxyhydroxides as sorption complexes.

54 ENVIRONMENTAL SCIENCES↗

Synchrotron Speciation of Silver and Zinc Oxide Nanoparticles Aged in a Kaolin Suspension

Assessments of the environmental fate and mobility of nanoparticles must consider the behavior of nanoparticles in relevant environmental systems that may result in speciation changes over time. Environmental conditions may act on nanoparticles to change their size, shape, and surface chemistry. Changing these basic characteristics of nanoparticles may result in a final reaction product that is significantly different than the initial nanomaterial. As such, basing long-term risk and toxicity on the initial properties of a nanomaterial may lead to erroneous conclusions if nanoparticles change upon release to the environment. The influence of aging on the speciation and chemical stability of silver and zinc oxide nanoparticles in kaolin suspensions was examined in batch reactors for up to 18 months. Silver nanoparticles remained unchanged in sodium nitrate suspensions; however, silver chloride was identified with the metallic silver nanoparticles in sodium chloride suspensions and may be attributed to an in situ silver chloride surface coating. Zinc oxide nanoparticles were rapidly converted via destabilization/dissolution mechanisms to Zn{sup 2+} inner-sphere sorption complexes within 1 day of reaction and these sorption complexes were maintained through the 12 month aging processes. Chemical and physical alteration of nanomaterials in the environment must be examined to understand fate, mobility, and toxicology.

54 ENVIRONMENTAL SCIENCES↗

Novel regenerable magnesium hydroxide sorbents for CO{sub 2} capture at warm gas temperatures

A novel sorbent consisting of Mg(OH){sub 2} was developed for carbon dioxide (CO{sub 2}) capture at 200-315{sup o}C suitable for CO{sub 2} capture applications such as coal gasification systems. Thermodynamic analysis conducted with the FactSage software package indicated that the Mg(OH){sub 2} sorbent system is highly favorable for CO{sub 2} capture up to 400{sup o}C at 30 atm. MgCO{sub 3} formed during sorption decomposes to release CO{sub 2} at temperatures as low as 375{sup o}C up to 20 atm. MgO rehydroxylation to form Mg(OH){sub 2} is possible at temperatures up to 300{sup o}C at 20 atm. The experimental data show that the sorbent is regenerable at 375{sup o}C at high pressure and that steam does not affect the sorbent performance. A multicycle test conducted in a high-pressure fixed-bed flow reactor at 200{sup o}C with 28% CO{sub 2} showed stable reactivity during the cyclic tests. The capture capacity also increased with increasing pressure. The sorbent is unique because it exhibits a high CO{sub 2} capture capacity of more than 3 mol/kg at 200 {sup o}C and also is regenerable at a low temperature of 375 {sup o} C and high pressure. High-pressure regeneration is advantageous because the CO{sub 2} compression costs required for sequestration can be reduced.

01 COAL, LIGNITE, AND PEAT↗

Simultaneous Control of Flexibility and Rigidity in Pore-Space-Partitioned Metal–Organic Frameworks

Flexi-MOFs are typically limited to low-connected (< 9) frameworks. Here we report a platform-wide approach capable of creating a family of high-connected materials (collectively called CPM-220) that integrate exceptional framework flexibility with high rigidity. We show that the multi-module nature of the pore-space-partitioned pacs (partitioned acs net) platform allows us to introduce flexibility as well as to simultaneously impose high rigidity in a tunable module-specific fashion. The inter-modular synergy has remarkable macro-morphological and sub-nanometer structural impacts. A prominent manifestation at both length scales is the retention of X-ray-quality single crystallinity despite huge hexagonal c-axial contraction (≈ 30%) and harsh sample treatment such as degassing and sorption cycles. CPM-220 sets multiple precedents and benchmarks on the pacs platform in both structural and sorption properties. Furthermore, they possess exceptionally high benzene/cyclohexane selectivity, unusual C 3 H 6 and C 3 H 8 isotherms, and promising separation performance for small gas molecules such as C 2 H 2 /CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Long Lived Charge Separated States Induced by trans-Stilbene Incorporation in the Pores of Brønsted Acidic HZSM-5 Zeolites: Effect of Gallium on the Spontaneous Ionization Process

In situ CW-EPR, diffuse reflectance UV-visible spectroscopy and Raman scattering were used to monitor the spontaneous incorporation of trans-stilbene (t-St, C{sub 14}H{sub 12}) in the medium pore H{sub 2.2}-GaZSM-5 zeolites [H{sub 2.2}(GaO{sub 2}){sub 2.2}(SiO{sub 2}){sub 93.8}] by direct exposure under dry and inert atmosphere of solid t-St to dehydrated porous material without any solvent. The sorption of t-St with relatively low ionization potential (7.65 eV) occurs in Broensted acidic H{sub 2.2}-GaZSM-5 zeolites according to a complex and slow reaction sequence. First, charge separation occurs and t-St{sup {sm_bullet}+}{at}H{sub 2.2}-GaZSM-5{sup {sm_bullet}-} radical pair is created, while long-lived t-St{at}H{sub 2.2}GaZSM-5{sup {sm_bullet}-{sm_bullet}+} electron-hole pair is formed through hole transfer. The analysis of the DRUVv spectra set recorded during the t-St sorption course shows the respective concentrations of all transient species as a function of time. In particular, note that system reorganization is observed through a second type of electron-hole pair. The broad and strong bands observed in the near-IR regions over extended periods of time are tentatively assigned to the electron and/or hole spectral signatures in slightly different environments. Applying pulsed X-band EPR techniques, we were able to reveal the structural surrounding of the unpaired electrons of charge-separated states through the proper assignment of electron couplings with a large number of nuclei such as {sup 1}H, {sup 29}Si, {sup 69}Ga, and {sup 71}Ga using the two-dimensional hyperfine-sublevel correlation experiment (2D-HYSCORE). The distance measurements deduced from dipolar coupling experiments provide a unique picture of the long distance distribution of unpaired electrons generated by spontaneous ionization of t-St upon incorporation within H{sub 2.2}-GaZSM-5 zeolite. This result demonstrates that a large fraction of the unpaired electrons are ejected away from the initial site of ionization and that this compartmentalization plus the created electrostatic field hinder dramatically the propensity of charge recombination. The results for H-GaZSM-5 are compared to similar experiments conducted on H-AlZSM-5 zeolites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Increased control over the frustration of p-tert-butylcalix[5]arene

Parital de-solvation of the toluene solvate of p-tert-butylcalix[5]arene affords a frustrated organic solid that is a new type of sorbant. Increased control over this sorption is achieved by employing a high boiling solvent for incremental de-solvation, revealing the calixarene:solvent ratio for maximum gas sorption

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Anion Exchange Behavior Of Ti, Zr, Hf, Nb And Ta As Homologues Of Rf And Db In Mixed HF--Acetone Solutions

We studied in detail the sorption behavior of Ti, Zr, Hf, Nb and Ta on AG 1 anion exchange resin in HF-acetone mixed solutions as a function of organic cosolvent and acid concentrations. Anion exchange behavior was found to be strongly acetone concentration dependent. The distribution coefficients of Ti, Zr, Hf and Nb increased and those of Ta decreased with increasing content of acetone in HF solutions. With increasing HF concentration anion exchange equilibrium analysis indicated the formation of fluoride complexes of group 4 elements with charge-3 and Ta---2. For Nb the slope of-2 increased up to-5. Optimal conditions for separation of the elements using AIX chromatography were found. Group 4 elements formed MF{sub 7}{sup 3-} (M = Ti, Zr, Hf) complexes whose sorption decreased Ti>Hf>Zr in reverse order of complex stability. This fact is of particular interest for studying ion exchange behavior of Rf compared to Ti. The advantages of studying chemical properties of Rf and Db in aqueous HF solutions mixed with organic solvents are briefly discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Positron Annihilation Spectroscopy Of High Performance Polymer Films Under CO{sub 2} Pressure

Positron annihilation Lifetime and Doppler broadening measurements are reported for six polymer films as a function of carbon dioxide (CO{sub 2}) absolute pressure ranging from 0 to 45 psi. Since the polymer films were thin and did not absorb all positrons, corrections were made in the lifetime analysis for the absorption of positrons in the positron source and sample holder using the Monte Carlo transport code MCNP. The studied polymers are found to behave differently from each other. Some polymers form positronium and others, such as the polyimide structures, do not. For those polymers that form positronium an interpretation in terms of free volume is possible; for those that don't form positronium, further work is needed to determine how best to describe the behavior in terms of the bulk positron annihilation parameters. A few of the studied polymers exhibit changes in positron lifetime and intensity under CO{sub 2} pressure which may be described by the Henry or Langmuir sorption models, while the positron response of other polymers is rather insensitive to the CO{sub 2} pressure. The results demonstrate the usefulness of positron annihilation spectroscopy in investigating the sorption of CO{sub 2} into various polymers at pressures up to about 3 atm (45psi).

74 ATOMIC AND MOLECULAR PHYSICS↗