Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SILICATE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Ultrafast Laser Welding and Terahertz Time-domain Spectroscopy of Soda Lime Silicate Glass

Joining and welding techniques of similar and dissimilar materials have reached their limits due to the inflexibility of adapting dielectric materials, e.g., glasses and ceramics, reproducibility for transparent materials, and cycle process time. The ability to join pieces of glasses using laser irradiation allows rapid processing of vacuum insulating glass (VIG) for a widening range of commercial energy-efficient applications. We have used a 1064-nm laser wavelength with 15 picoseconds pulse width and a 155-kHz repetition rate to weld commercial plate glass pieces. The welded samples were characterized via x-ray fluorescence (XRF), time-of-flight secondary ion mass spectrometry (TOF–SIMS), polarimetry, and terahertz time-domain spectroscopy (THz-TDS) to determine the integrity of the weld and chemical changes in the welded areas. Our data shows no significant changes in glass chemistry and structure on average over nano- to micro-scales occurred from the welding process within the limits of the characterization tools. Our results demonstrate successful welding of glass plates without significant changes in the glass chemistry, structure, or properties in the laser-modified region or strains in the bulk glass.

Matthies, Kathleen [ORNL] (ORCID:0009000213135441)↗

Transition of Blast Furnace Slag from Silicate Based to Aluminate Based: Electrical Conductivity

The electrical conductivity of the CaO-SiO{sub 2}-Al{sub 2}O{sub 3}-MgO-TiO{sub 2} slag was determined using the four-electrode method. The effect of the Al{sub 2}O{sub 3} and Al{sub 2}O{sub 3}/SiO{sub 2} mass ratio on the electrical conductivity was studied. At a fixed CaO/SiO{sub 2} ratio of 1.20, the electrical conductivity decreases with increasing Al{sub 2}O{sub 3} from 16 mass pct to 24 mass pct because of the increased polymerization of aluminosilicate structures and the reduced amount of conductive ions. However, it increases with Al{sub 2}O{sub 3} of more than 24 mass pct because of the difference in the stable energy between [AlO{sub 4}]{sup 5−} and [SiO{sub 4}]{sup 4−}. Increasing the Al{sub 2}O{sub 3}/SiO{sub 2} ratio from 0.47 to 0.79 causes the electrical conductivity to increase and has an opposite effect when the ratio is greater than 0.79. Furthermore, Raman spectroscopy of the quenched slags was analyzed to understand the structural role of Al{sub 2}O{sub 3} and Al{sub 2}O{sub 3}/SiO{sub 2} mass ratio in the network. The Raman spectroscopy results indirectly supported the variations of electrical conductivity with the composition of the slags.

36 MATERIALS SCIENCE↗

Feldspar-based CaO–K 2 O–Na 2 O–BaO silicate glass sealant for solid oxide fuel cells

Sealants have been widely used in solid oxide fuel cells (SOFCs), and glass sealants have shown considerable potentials due to their low leakage rate. In this paper, we report a type of feldspar-based glass sealant, mainly composed of CaO-K 2 O-Na 2 O-BaO, with a coefficient of thermal expansion (CTE) of 10.11×10 -6 k -1 , a glass transition temperature at 528°C, and a softening temperature at 573°C. Using this sealant to seal anode-supported SOFCs, the open-circuit voltage (OCV) remains at 1.08V after five thermal cycles and 50-hour aging at 750°C, close to the theoretical OCV value. The SEM and EDS reveal stable interface between the glass sealant and the anode, indicating excellent performance of the CaO-K 2 O-Na 2 O-BaO glass sealant for SOFC sealing applications.

25 ENERGY STORAGE↗