Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHADOW”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Coherent J/ψ photoproduction at forward rapidity in ultra-peripheral Pb–Pb collisions at $\sqrt{s_{NN}}$ = 5.02 TeV

The ALICE collaboration performed the first rapidity-differential measurement of coherent J/ψ photoproduction in ultra-peripheral Pb–Pb collisions at a center-of-mass energy $ \sqrt{s_{NN}}$=5.02 TeV. The J/ψ is detected via its dimuon decay in the forward rapidity region (-4.0 < γ < -2.5) for events where the hadronic activity is required to be minimal. The analysis is based on an event sample corresponding to an integrated luminosity of about 750 μb -1 . The cross section for coherent J/ψ production is presented in six rapidity bins. The results are compared with theoretical models for coherent J/ψ photoproduction. These comparisons indicate that gluon shadowing effects play a role in the photoproduction process. The ratio of ψ' to J/ψ coherent photoproduction cross sections was measured and found to be consistent with that measured for photoproduction off protons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

First measurement of the |t|-dependence of coherent J/ψ photonuclear production

The first measurement of the cross section for coherent J/ψ photoproduction as a function of |t|, the square of the momentum transferred between the incoming and outgoing target nucleus, is presented. The data were measured with the ALICE detector in ultra-peripheral Pb–Pb collisions at a centre-of-mass energy per nucleon pair $\sqrt{s_{NN}}$=5.02TeV with the J/ψ produced in the central rapidity region |y|<0.8, which corresponds to the small Bjorken-x range (0.3-1.4)×10 -3 . The measured |t|-dependence is not described by computations based only on the Pb nuclear form factor, while the photonuclear cross section is better reproduced by models including shadowing according to the leading-twist approximation, or gluon-saturation effects from the impact-parameter dependent Balitsky–Kovchegov equation. These new results are therefore a valid tool to constrain the relevant model parameters and to investigate the transverse gluonic structure at very low Bjorken-x.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The classical equations of motion of quantized gauge theories, Part 2: Electromagnetism

In this and companion papers, we show that quantum field theories with gauge symmetries permit a broader class of classical dynamics than typically assumed. In this article, we show that the quantization of electromagnetism permits the existence of classical electric field states that do not obey Gauss’s law. These states are gauge invariant and their time evolution can be consistently described using the Schrödinger equation. The time evolution of these states is such that at the classical level, the full set of Maxwell’s equations would appear to hold, with the physical effects of these states being attributable to an auxiliary, static “shadow” charge density with no internal degrees of freedom. This density could affect the dynamics of charged particles in our universe and it may thus be of observational interest.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of kaon directed flow in Au+Au collisions in the high baryon density region

Rapidity-odd directed flow v 1 measurements are presented for $K^±$ and $K^0_S$ in Au + Au collisions for $\sqrt{s_{NN}}$ from 3.0 to 3.9 GeV with the STAR experiment. For comparison, v 1 of π ± , protons, and Λ from the same collisions are also discussed. The mid-rapidity v 1 slope dv 1 /dy| y=0 for protons and Λ is positive in these collisions. On the other hand, v 1 slope of kaons exhibits a strong dependence: negative at p T < 0.6 GeV/c and positive at higher p T . A similar p T dependence is also evident for the v 1 slope of charged pions. Compared to the spectator-removed calculations in Au+Au collisions at $\sqrt{s_{NN}}$ = 3.0–3.9 GeV, the JAM model demonstrates a pronounced shift of the v 1 slopes of mesons towards the negative direction. It suggests that the shadowing effect of the spectators plays an important role in the observed kaon anti-flow at low p T in the high baryon density region of non-central collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Commercial lunar propellant architecture: A collaborative study of lunar propellant production

Aside from Earth, the inner solar system is like a vast desert where water and other volatiles are scarce. An old saying is, 'In the desert, gold is useless and water is priceless.' While water is common on Earth, it is of very high value in space. Science missions to the Moon have provided direct evidence that regions near the lunar poles, which are permanently in shadow, contain substantial concentrations of water ice. On the lunar surface, water itself is critical for human consumption and radiation shielding, but water can also be decomposed into hydrogen and oxygen via electrolysis. The oxygen thus produced can be used for life support, and hydrogen and oxygen can be combusted for rocket propulsion. Due to the Moon's shallow gravity well, its water-derived products can be exported to fuel entirely new economic opportunities in space. This paper is the result of an examination by industry, government, and academic experts of the approach, challenges, and payoffs of a private business that harvests and processes lunar ice as the foundation of a lunar, cislunar (between the Earth and the Moon), and Earth-orbiting economy. A key assumption of this analysis is that all work - construction, operation, transport, maintenance and repair - is done by robotic systems. No human presence is required.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Methodology for Estimating Solar Potential on Multiple Building Rooftops for Photovoltaic Systems

In this paper, a methodology for estimating solar potential on multiple building rooftops is presented. The objective of this methodology is to estimate the daily or monthly solar radiation potential on individual buildings in a city/region using Light Detection and Ranging (LiDAR) data and a geographic information system (GIS) approach. Conceptually, the methodology is based on the upward-looking hemispherical viewshed algorithm, but applied using an area-based modeling approach. The methodology considers input parameters, such as surface orientation, shadowing effect, elevation, and atmospheric conditions, that influence solar intensity on the earth s surface. The methodology has been implemented for some 212,000 buildings in Knox County, Tennessee, USA. Based on the results obtained, the methodology seems to be adequate for estimating solar radiation on multiple building rooftops. The use of LiDAR data improves the radiation potential estimates in terms of the model predictive error and the spatial pattern of the model outputs. This methodology could help cities/regions interested in sustainable projects to quickly identify buildings with higher potentials for roof-mounted photovoltaic systems.

14 SOLAR ENERGY↗

Solar access of residential rooftops in four California cities

Shadows cast by trees and buildings can limit the solar access of rooftop solar-energy systems, including photovoltaic panels and thermal collectors. This study characterizes residential rooftop shading in Sacramento, San Jose, Los Angeles and San Diego, CA. Our analysis can be used to better estimate power production and/or thermal collection by rooftop solar-energy equipment. It can also be considered when designing programs to plant shade trees. High-resolution orthophotos and LiDAR (Light Detection And Ranging) measurements of surface height were used to create a digital elevation model of all trees and buildings in a well-treed 2.5-4 km{sup 2} residential neighborhood. On-hour shading of roofing planes (the flat elements of roofs) was computed geometrically from the digital elevation model. Values in future years were determined by repeating these calculations after simulating tree growth. Parcel boundaries were used to determine the extent to which roofing planes were shaded by trees and buildings in neighboring parcels. For the subset of S + SW + W-facing planes on which solar equipment is commonly installed for maximum solar access, absolute light loss in spring, summer and fall peaked about 2 to 4 h after sunrise and about 2 to 4 h before sunset. The fraction of annual insolation lost to shading increased from 0.07-0.08 in the year of surface-height measurement to 0.11-0.14 after 30 years of tree growth. Only about 10% of this loss resulted from shading by trees and buildings in neighboring parcels. (author)

14 SOLAR ENERGY↗

Fast dynamic processes of solar radiation

This paper studies dynamic processes of fast-alternating solar radiation which are assessed by alternation of clouds. Most attention is devoted to clouds of type Cumulus Humilis, identified through visual recognition and/or a specially constructed automatic sensor. One second sampling period was used. Recorded data series were analyzed with regard to duration of illuminated 'windows' between shadows, their stochastic intervals, fronts and the magnitude of increments of solar irradiance. (author)

14 SOLAR ENERGY↗

Spatial disaggregation of satellite-derived irradiance using a high-resolution digital elevation model

Downscaling of the Meteosat-derived solar radiation ({proportional_to}5 km grid resolution) is based on decomposing the global irradiance and correcting the systematic bias of its components using the elevation and horizon shadowing that are derived from the SRTM-3 digital elevation model (3 arc sec resolution). The procedure first applies the elevation correction based on the difference between coarse and high spatial resolution. Global irradiance is split into direct, diffuse circumsolar and diffuse isotropic components using statistical models, and then corrections due to terrain shading and sky-view fraction are applied. The effect of reflected irradiance is analysed only in the theoretical section. The method was applied in the eastern Andalusia, Spain, and the validation was carried out for 22 days on April, July and December 2006 comparing 15-min estimates of the satellite-derived solar irradiance and observations from nine ground stations. Overall, the corrections of the satellite estimates in the studied region strongly reduced the mean bias of the estimates for clear and cloudy days from roughly 2.3% to 0.4%. (author)

14 SOLAR ENERGY↗

Analysis of impact to optical environment of the land by flat-plate and array of tracking PV panels

The impact to the optical environment result from shading of PV panels becomes concerned. This paper describes how to calculate illumination level on the land around tracking PV (both isolated and arrayed) panel. The land under the flat-plate PV is dark by shading, but the influence from the tracking PV is not very significant, typically half in average. This is because shadow by tracking panel moves. The shading influence is further decreased with the increase of pedestal height. We report with this advantage, tracking PV can be combined with agriculture as a double use of the land.

14 SOLAR ENERGY↗

SolarPILOT: A power tower solar field layout and characterization tool

This paper develops and demonstrates a new SolarPower tower Integrated Layout and Optimization Tool (SolarPILOT). The tool uses the analytical flux image Hermite series approximation originally implemented in the DELSOL3 software developed by Sandia National Laboratory in the early 1980s. By applying the analytical model to individual heliostat images rather than large groups or zones of heliostats, SolarPILOT can characterize a wide variety of heliostat field layouts. The individual heliostat modeling approach increases computational expense in comparison with DELSOL3, so SolarPILOT implements a number of improvements to the analytical approximation method to improve model accuracy and computational efficiency. This paper discusses several of these methods, including dynamic heliostat grouping to reduce the expense of intercept factor evaluation, approximation of annual productivity with a subset of time steps throughout the year, polygon clipping to accurately calculate inter-heliostat shadowing and blocking, receiver and tower geometry optimization, and a trigonometric image transformation technique that ensures model accuracy for small heliostats. SolarPILOT also integrates a Monte-Carlo ray tracing engine (SolTrace), providing improved receiver optical modeling capability, a user-friendly front end for geometry definition, and side-by-side validation of the analytical algorithms.

14 SOLAR ENERGY↗

Experimental comparison of pyranometer, reflectometer, and spectrophotometer methods for the measurement of roofing product albedo

Albedo (solar reflectance) can be measured outdoors with a pyranometer or indoors with a hemispherical reflectometer or a spectrophotometer. The current study evaluates these methods and their applicability to roofing materials by measuring and comparing the ASTM E1918 (pyranometer), non-ASTM E1918A (alternative pyranometer), ASTM C1549 (reflectometer), and E903 (spectrophotometer) albedos of 10 roofing products, including three single-ply membranes, one asphalt shingle, three roofing aggregates, and three high-profile tiles. It uses full-size (4 m × 4 m) assemblies in the E1918 and E1918A trials; corrects the E1918 albedos to remove shadow and background errors; and evaluates C1549 and E903 albedos with two different irradiance spectra, one global horizontal and the other beam normal. E1918A albedos matched E1918 corrected (E1918_cor) albedos to within 0.036. Furthermore, agreement between C1549 air mass 1 global horizontal (C1549_G1) albedo and E1918_cor albedo was within 0.015 for membrane and shingle coupons, and within 0.031 for aggregates, though the uncertainty in the latter agreement was up to 0.043. After minor corrections, C1549_G1 albedos of flat or slightly convex tile chips were 0.032–0.052 higher than the E1918_cor albedos of their corresponding high-profile tile assemblies because high-profile surfaces have concavities. Switching to the beam-normal albedo C1549_1.5E increased the C1549 albedos of the 10 tested products by 0.004–0.054, with the largest increases (C1549_1.5E – C1549_G1) accruing to spectrally selective cool colors. Using C1549_1.5E albedo to characterize a chip of a cool-colored tile compounded the error induced by representing a high-profile surface by a flat or slightly convex specimen.

14 SOLAR ENERGY↗

Life cycle costing of waste management systems: Overview, calculation principles and case studies

Highlights: • We propose a comprehensive model for cost assessment of waste management systems. • The model includes three types of LCC: Conventional, Environmental and Societal LCCs. • The applicability of the proposed model is tested with two case studies. - Abstract: This paper provides a detailed and comprehensive cost model for the economic assessment of solid waste management systems. The model was based on the principles of Life Cycle Costing (LCC) and followed a bottom-up calculation approach providing detailed cost items for all key technologies within modern waste systems. All technologies were defined per tonne of waste input, and each cost item within a technology was characterised by both a technical and an economic parameter (for example amount and cost of fuel related to waste collection), to ensure transparency, applicability and reproducibility. Cost items were classified as: (1) budget costs, (2) transfers (for example taxes, subsidies and fees) and (3) externality costs (for example damage or abatement costs related to emissions and disamenities). Technology costs were obtained as the sum of all cost items (of the same type) within a specific technology, while scenario costs were the sum of all technologies involved in a scenario. The cost model allows for the completion of three types of LCC: a Conventional LCC, for the assessment of financial costs, an Environmental LCC, for the assessment of financial costs whose results are complemented by a Life Cycle Assessment (LCA) for the same system, and a Societal LCC, for socio-economic assessments. Conventional and Environmental LCCs includes budget costs and transfers, while Societal LCCs includes budget and externality costs. Critical aspects were found in the existing literature regarding the cost assessment of waste management, namely system boundary equivalency, accounting for temporally distributed emissions and impacts, inclusions of transfers, the internalisation of environmental impacts and the coverage of shadow prices, and there was also significant confusion regarding terminology. The presented cost model was implemented in two case study scenarios assessing the costs involved in the source segregation of organic waste from 100,000 Danish households and the subsequent co-digestion of organic waste with animal manure. Overall, source segregation resulted in higher financial costs than the alternative of incinerating the organic waste with the residual waste: 1.6 M€/year, of which 0.9 M€/year was costs for extra bins and bags used by the households, 1.0 M€/year for extra collections and −0.3 M€/year saved on incineration.

09 BIOMASS FUELS↗

A review of water valuation metrics: Supporting sustainable water use in manufacturing

In the manufacturing sector, water has been often considered too cheap to conserve. Such thinking relies on water valuations that limit the value of water to the price paid. Using such simple methods, the share of water cost to total manufacturing cost is significantly small, <3%. As a result, conserving water and enabling technology uptake is difficult to justify economically and slow to advance, hindering progress toward sustainable water use. However, the value of water to a manufacturer is far greater than the price paid. Valuations such as the true cost of water consider the additional in-plant treatment and energy costs and have been gaining greater traction in the manufacturing sector. However, true cost alone still undervalues water by not accounting for economic and social costs related to scarcity and environmental externalities. This paper makes the case and presents a framework for valuing manufacturing water beyond the price paid and the true cost. The proposed fuller valuation of manufacturing water takes into account the internal and opportunity costs associated with the realization of water risks. The paper follows with a review of a wide range of water valuation metrics, both at the specific industry level and regional/economy-wide level. The use of various valuation metrics incorporating the relationship between the change in value with change in water use, such as marginal value of water, shadow price, and elasticity at the specific industry level, has been limited in the U.S. manufacturing sector. Further, a limited number of studies exist on data-intensive subjective evaluation techniques such as computable general equilibrium modeling and input-output modeling for regional water valuation. After reviewing water value metrics, several recent case studies from manufacturers from the literature are presented to illustrate both the promise and challenges of a fuller valuation of water as proposed here. Some large multinational corporations have moved toward assessing the value of water via supply chain sustainability initiatives, environmental profit and loss accounting, estimating risk-adjusted values of water, hydro-economic modeling, natural capital asset valuation, and developing value chain indices. This paper provides policymakers and technology developers a framework for monetizing water value beyond its true cost and current metrics. If adopted, such fuller water valuations can help make the business case for the development and deployment of cost-effective water-conserving technologies, thereby improving the sustainability of the manufacturing sector with respect to water.

54 ENVIRONMENTAL SCIENCES↗

Local Thermochemical Mechanisms in Direct Solar Graphite Synthesis from Methane

Methane pyrolysis is known to produce hydrogen and solid carbon in a variety of thermal processes. However, the generated carbon product typically belongs to a low-value amorphous type. Here, we elucidate the thermochemical mechanisms of a reaction that produces high-quality graphite via direct solar methane pyrolysis on a porous substrate. By comparing graphite deposition rates and local reaction zone temperatures of exposed and shadowed regions from the same experiment, we clarify the effects of thermolysis and photolysis in this emission-free process that both decarbonizes a fuel and produces a critical material for the sustainable energy transition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Macroscopic Nonuniformities in Metal Grids Formed by Cracked Film Lithography Result in 19.3% Efficient Solar Cells

Cracked film lithography (CFL) is an emerging method for patterning transparent conductive metal grids. CFL can be vacuum- and Ag-free, and it forms more durable grids than nanowire approaches. In spite of CFL’s promising transmittance/grid sheet resistance/wire spacing tradeoffs, previous solar cell demonstrations have had relatively low performance. This work introduced macroscopic nonuniformities in the grids to improve the short-circuit current density/fill factor tradeoff in small area Cu(In,Ga)Se2 cells. Furthermore, the performance of optimized baseline grids was matched by CFL grids with microscopic openings and macroscopic patterns, culminating in a 19.3%-efficient cell. Simulations show that uniform CFL grids are enhanced by patterning because it leads to better balance among shadowing, grid resistance and transparent conductive oxide resistance losses. Thin-film module efficiency calculations were performed to highlight the performance gains that metal grids can enable by eliminating the transparent conductive oxide losses and widening monoliths. Adding the patterned CFL grids demonstrated in this work to CIGS modules is predicted to reach 0.7% higher efficiency (absolute) than screen-printed grids.

14 SOLAR ENERGY↗

Solid-State Lighting Using Side-by-Side White Phosphorescent Organic Light-Emitting Diodes

White organic light-emitting diodes (WOLEDs) have become increasingly popular for use in solid-state illumination, where diffuse, large area light sources that achieve a high color rendering index and luminous power efficiency are desirable. Color-tunable emission, where the light source combines emission from multiple, separately addressed color elements, is conveniently provided by WOLEDs for the purpose of adapting the lighting source to a particular illumination requirement. In this work, we demonstrate a method for side-by-side positioning of monochromatic blue and yellow phosphorescent OLED stripes that are combined to create tunable white light, using a high resolution mechanical peel-off patterning method. We achieve a peak luminous power efficiency of 17.1 ± 0.3 lm W –1 and an external quantum efficiency of 11.8 ± 0.2% and demonstrate color tunability of the 1960 Commission Internationale d’Eclairage chromaticity coordinates from (u,v) = (0.33,0.36) to (0.12,0.32). This corresponds to a tuning rnge of the color rendering index from 74 ± 1 to 86 ± 1 and the correlated color temperature from 2000 to 8000 ± 500 K. Here, due to the nondestructive nature of the peel-off technique, patterned devices exhibit a lifetime comparable to conventional, shadow mask-patterned devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Effect of the Incident Collision Energy on the Porosity of Vapor Deposited Amorphous Solid Water Films

Molecular beam techniques are used to grow water films on Pt(111) with various incident angles and collision energies from 5 to 205 kJ/mole. The effect of the incident angle and collision energy on the porosity and surface area of the vapor deposited water films was studied using nitrogen physisorption and infrared spectroscopy. At low incident energy (5 kJ/mole), the infrared spectra, which provide a direct measure of the surface area, show that the surface area increases with incident angle and levels-off at angles > 65°. This is in contrast to the nitrogen uptake data which display a maximum near 70° due to the decrease in nitrogen condensation in the larger pores that develop at high incident angles. Both techniques show that the morphology of vapor deposited water films depends strongly on the incident kinetic energy. These observations are consistent with a ballistic deposition-shadowing model used to describe the growth of highly porous materials at glancing angle. The dependence of film morphology on incident energy may have important implications for the growth of porous materials via glancing angle deposition and for the structure of interstellar ices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗