Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SAND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Sources of variation in nitrous oxide flux from Amazonian ecosystems

Nitrous oxide flux and soil nutrient characteristics were measured in three undisturbed tropical ecosystem types, in cleared and burned areas, and in areas of forest converted to pasture near Manaus, Brazil. Nitrogen mineralization, nitrification, and soil nitrogen pools were high in upland forests on clay soils (terra firme) and low in the sand-type and floodplain (varzea) soils. Nitrous oxide flux followed the same pattern, with an average flux of 1.9 ng/sq cm per hr in terra firme, 0.3 in sand types, and 0.1 in varzea. Flux from recently cleared and burned areas did not differ from terra firme forest, but pastures had significantly elevated fluxes (10.3 ng/sq cm per hr). These data were combined with satellite data-based areal estimates of land cover classes to estimate total N2O-N flux from the intensive study area used by the Amazon Boundary Layer Experiment. Total N2O-N flux from the area was 22.9 kg/h; pastures covered 11 percent of the area but accounted for over 40 percent of the flux.

Matson, P. A.↗

Bidirectional measurements of surface reflectance for view angle corrections of oblique imagery

An apparatus for acquiring bidirectional reflectance-factor data was constructed and used over four surface types. Data sets were obtained over a headed wheat canopy, bare soil having several different roughness conditions, playa (dry lake bed), and gypsum sand. Results are presented in terms of relative bidirectional reflectance factors (BRFs) as a function of view angle at a number of solar zenith angles, nadir BRFs as a function of solar zenith angles, and, for wheat, vegetation indices as related to view and solar zenith angles. The wheat canopy exhibited the largest BRF changes with view angle. BRFs for the red and the NIR bands measured over wheat did not have the same relationship with view angle. NIR/Red ratios calculated from nadir BRFs changed by nearly a factor of 2 when the solar zenith angle changed from 20 to 50 degs. BRF versus view angle relationships were similar for soils having smooth and intermediate rough surfaces but were considerably different for the roughest surface. Nadir BRF versus solar-zenith angle relationships were distinctly different for the three soil roughness levels. Of the various surfaces, BRFs for gypsum sand changed the least with view angle (10 percent at 30 degs).

Jackson, R. D.↗

The potential scale of aeolian structures on Venus

Simulations of the Venusian aeolian environment with the Venus Wind Tunnel have shown that microdunes are formed during the entrainment of sand-sized material. These structures are several tens of centimeters long (2-3 cm high) and combine the morphological and behavioral characteristics of both full-scale terrestrial dunes and current ripples formed in subaqueous environments. Their similarity to both reflects the fact that the Venusian atmosphere has a density intermediate between air and water. Although the development of microdunes in the wind tunnel experiments was limited by tunnel dimensions, it is possible to make some predictions about their potential size on Venus, and the potential size of related aeolian structures. Microdunes are fluid-filled structures (as are dunes and current ripples) and as such have no theoretical upper limit to their size from a fluid dynamics viewpoint. Limitations to size observed in subaqueous structures are set by, for example, water depth; limitations to the size of dunes are set by, for example, sand supply. It is therefore reasonable to suppose that the microdunes on Venus could evolve into much larger features than those observed in experiments. In addition, the researchers note that current ripples (which are closely related to microdunes) are often found in association with giant ripples that have dimensions similar to aeolian dunes. Thus, it may be reasonable to assume that analogous large scale structures occur on Venus. Both (terrestrial) aeolian and subaqueous environments generate structures in excess of one hundred meters in wavelength. Such dimensions may therefore be applicable to Venusian bedforms. Analysis of Magellan data may resolve the issue.

Marshall, J. R.↗

Remote sensing observations of Kelso Dunes, California

The extensive field studies necessary to understand the development of desert sand seas are hampered by their large size and inaccessibility. Remote sensing data used in conjunction with detailed field studies and textural and mineralogical analyses of surface sediments at specific ground-control points can provide a wealth of information on dune types and activity, regional aeolian dynamics, sediment sources and thickness, and depositional history for sand seas. The information available from LANDSAT TM (VNIR), AIRSAR (microwave), and AVIRIS (high spectral resolution VNIR) is compared using Kelso Dunes as a test case.

Greeley, Ronald↗

Dark material in the polar layered deposits on Mars

The Martian polar layered deposits probably record periodic variations in the deposition of dust and ice caused by climate changes over the past 10 to 100 million years. The polar layered deposits appear to be the source of dark, saltating material that has been distributed over the surface of Mars, but the mechanisms by which this material is incorporated and eroded from the layered deposits is unknown. These mechanisms must be understood before the processes that formed and modified the layered deposits can be inferred and related to Martian climate changes. In summary, weathering of the Martian layered deposits by sublimation of water ice may account for the geologic relationships observed in the Martian polar regions. The non-volatile components of the layered deposits appears to consist mainly of bright red dust, with small amounts of dark dust or sand. Alternatively, dark sand-sized basaltic particles may occasionally be transported onto the layered deposits, forming thin layers. Once eroded, particles of either type may saltate to form the dark dunes found in both polar regions.

Herkenhoff, Ken↗

Comparison of drift potential derived from Mars GCM with rock abundance from IRTM

A General Circulation Model (GCM) for Mars developed at the Ames Research Center makes global predictions of wind shear stress as a function of season and dust optical depth. The surface shear stress, pressure and temperature from the GCM are used here to calculate the drift potential, or the amount of sediment that could be moved by the wind. A map of sand roses based on the calculations was generated for comparison with predictions of the distribution of rocks on Mars from Christensen, which is derived from infrared thematic mapper (IRTM) data. The drift potential was defined for Earth as the amount of sand moved at a given place for a stated period of time, and was adapted here for Mars.

Xu, Pengyang↗

Development of a Cone Penetrometer for Measuring Spectral Characteristics of Soils in Situ

A patent was recently granted to the U.S. Army for an adaptation of a soil cone penetrometer that can be used to measure the spectral characteristics (fluorescence or reflectance) of soils adjacent to the penetrometer rod. The system can use a variety of light sources and spectral analytical equipment. A laser induced fluorescence measuring system has proven to be of immediate use in mapping the distribution of oil contaminated soil at waste disposal and oil storage areas. The fiber optic adaptation coupled with a cone penetrometer permits optical characteristics of the in-situ soil to be measured rapidly, safely, and inexpensively. The fiber optic cone penetrometer can be used to gather spectral data to a depth of approximately 25 to 30 m even in dense sands or stiff clays and can investigate 300 m of soil per day. Typical detection limits for oil contamination in sand is on the order of several hundred parts per million.

Lee, Landris T., Jr.↗

Preliminary endurance tests of water vaporizers for resistojet applications

Three water vaporizers designed for resistojet applications were built and tested for periods up to 500 h and 250 thermal cycles. Two of the vaporizers were not sensitive to orientation with respect to gravity, an indication of likely compatibility with low-gravity environments. Some temperatures and pressures in the third were impacted by orientation, although operation was always stable. The pressure drop across the sand-filled version increased by 147 percent in 38 h and 19 thermal cycles. Bonding of the sand granules in the downstream end of the heat exchanger was the suspected cause of failure of this vaporizer. Pressure drops across the two sintered stainless steel-filled versions were more gradual. One, with a pore size of 60 microns, showed an 80 percent increase in 500 h and 250 thermal cycles and another, with a 10 microns poresize, showed a 29 percent increase in 350 h and 175 thermal cycles. Testing of the latter metal-filled vaporizer was ongoing as of this writing. Oxidation of the porous metal packing materials in these vaporizers, with subsequent deposition of oxide particles within the pores, was believed to have caused the observed increases in pressure drops.

Morren, W. Earl↗

Radiometric gains of satellite sensors of reflected solar radiation - Results from NASA ER-2 aircraft measurements

A method for using congruent aircraft-satellite observations to calibrate a satellite sensor is presented. A calibrated spectroradiometer at an altitude of 19 km above White Sands, NM, is oriented to view White Sands at the satellite overpass time along the same view vector as the satellite sensor. Collected data are transformed into corresponding estimates of sensor band radiance at the satellite (derived from the aircraft measurements), and average count (from the sensor measurements). These are both averaged across the footprint of the spectroradiometer. Results are presented for the evolution of NOAA-11 Advanced Very High Resolution Radiometer (AVHRR) (Bands 1 and 2) gain between November 1988 and October 1990, and for GOES-6 and GOES-7 VISSR/VAS visible bands during the same period. Estimates of uncertainty in the results are presented, as well as ideas for their reduction in future flights.

Abel, Peter↗

Preliminary endurance tests of water vaporizers for resistojet applications

Three water vaporizers designed for resistojet applications were built and tested for periods up to 500 h and 250 thermal cycles. Two of the vaporizers were not sensitive to orientation with respect to gravity, an indication of likely compatibility with low-gravity environments. Some temperatures and pressures in the third were impacted by orientation, although operation was always stable. The pressure drop across the sand-filled version increased by 147 percent in 38 h and 19 thermal cycles. Bonding of the sand granules in the downstream end of the heat exchanger was the suspected cause of failure of this vaporizer. Pressure drops across the two sintered stainless steel-filled versions were more gradual. One, with a pore size of 60 microns, showed an 80 percent increase in 500 h and 250 thermal cycles and another, with a 10 microns poresize, showed a 29 percent increase in 350 h and 175 thermal cycles. Testing of the latter metal-filled vaporizer was ongoing as of this writing. Oxidation of the porous metal packing materials in these vaporizers, with subsequent deposition of oxide particles within the pores, was believed to have caused the observed increases in pressure drops.

Morren, W. E.↗

Calibration results for NOAA-11 AVHRR channels 1 and 2 from congruent path aircraft observations

A method for using congruent atmospheric path aircraft-satellite observations to calibrate a satellite radiometer is presented. A calibrated spectroradiometer aboard a NASA ER-2 aircraft at an altitude of 19 km above White Sands (New Mexico) was oriented to view White Sands at the overpass time of the NOAA-11 AVHRR instrument along the same view vector as the satellite instrument. The data from six flights between November 1988 and October 1990 were transformed into corresponding estimates of AVHRR channel radiance at the satellite (derived from the aircraft measurements), and average counts (from the AVHRR measurements), both averaged across the footprint of the spectroradiometer. Prelaunch measurements of the AVHRR spectral response profiles are assumed, and the radiance spectrum measured by the spectroradiometer was adjusted to satellite altitude using the LOWTRAN-7 computer code. Results show reduced gains in both channel 1 (0.65 micron) and channel 2 (0.85 micron), compared to prelaunch values, with little further reduction in gain after 200 days in orbit. Results for the gain ratio (channel 1/channel 2), which is important for the calculation of the normalized vegetation index, show constant in-orbit values 5 percent above the prelaunch value.

Abel, Peter↗

The mass balance of soil evolution on late Quaternary marine terraces, northern California

Mass-balance interpretation of a soil chronosequence provides a means of quantifying elemental addition, removal, and transformation that occur in soils from a flight of marine terraces in northern California. Six soil profiles that range in age from several to 240,000 yr are developed in unconsolidated, sandy-marine, and eolian parent material deposited on bedrock marine platforms. Soil evolution is dominated by (1) open-system depletion of Si, Ca, Mg, K, and Na; (2) open-system enrichment of P in surface soil horizons; (3) relative immobility of Fe and Al; and (4) transformation of Fe, Si, and Al in the parent material to secondary clay minerals and sesquioxides. Net mass losses of bases and Si are generally uniform with depth and substantial, in some cases approaching 100 percent; however, the rate of loss of each element differs markedly, causing the ranking of each by relative abundance to shift with time. Loss of Si from the sand fraction by dissolution and particle-size diminution, from about 100 percent to less than 35 percent over 240 ky, mirrors a similar gain in the silt and clay size fractions. The Fe originally present in the sand fraction decreases from greater than 80 percent to less than 10 percent, whereas the amount of Fe present in the clay and crystalline oxyhydroxide fractions increases to 25 percent and 70 percent, respectively.

Merritts, Dorothy J.↗

Thermal and range fusion for a planetary rover

This paper describes how fusion between thermal and range imaging allows us to discriminate different types of materials in outdoor scenes. First, we analyze how pure vision segmentation algorithms applied to thermal images allow discriminating materials such as rock and sand. Second, we show how combining thermal and range information allows us to better discriminate rocks from sand. Third, as an application, we examine how an autonomous legged robot can use these techniques to explore other planets.

Caillas, Claude↗

A simple model of clastic sediments on Mars

In preparation for the start of Mars Observer operations at Mars later this year, Viking Infrared Thermal Mapper (IRTM) observations were synthesized into a simple but geologically coherent conceptual model for use in establishing targets for coordinated Thermal Emission Spectrometer (TES) and Mars Observer Camera (MOC) observations. The model is based on three assumptions that are, at best, only partly true: that albedo is a measure of the presence or absence of dust; that thermal inertia is a measure of the weighted average particle size; and that rock abundance is a measure of the statistical thickness of fine sediment (i.e., that the observed areal abundance of rock reflects the whole or partial burial of rocks). Using this model, it is possible to show that, on the scale of 30 km, mantles of wind-transportable sediment (dust and sand) are at most about 1 m thick, and that on a global average such mantles are about 35 cm thick. It is shown that 3.8 x 10(exp 19) cu cm of such sediment covers Mars equatorward of +/- 60 deg latitude. Using the model, interpretation of digital maps of IRTM data focus attention not only on areas where dust is the primary sediment (e.g., Arabia Terra), but also on areas where sand is the primary sediment (e.g., eastern Valles Marineris) and where rocks and other coarse materials are abundant (e.g., eastern Kasei Vallis). Three IRTM data sets are used in the analysis: Viking 1 and 2 pre-dawn observations mosaiced into a global map of single-point thermal inertias at 0.5 deg/bin resolution; Pleskot and Miner's global albedo map using the best available, clear-period IRTM observations (1x/bin); and Christensen's 1 deg/bin rock abundance map. Uncertainty analyses indicate these data sets to be accurate to 5 percent, 2 percent, and 20 percent, respectively.

Christensen, Philip R.↗

Deucalionis Regio, Mars: Evidence for a unique mineralogic endmember and a crusted surface

A small equatorial region south of Sinus Meridiani, Deucalionis Regio, has been found spectrally distinct from other regions as seen in a high spectral resolution telescopic image of the meridian hemisphere of Mars. Analysis of Viking IRTM and other related data suggest that Deucalionis Regio has a crusted surface. The crust-bonding minerals may contribute to the spectral uniqueness of this region. Two independent analyses of spectral images, linear spectral mixing and supervised classification based on the spectral shapes, showed that in addition to the well-known spectral endmember regions in this image (western Arabia, south Acidalia, and Sinus Meridiani), Deucalionis Regio has spectral properties that are unique enough to make it a principle endmember unit. In those earlier works, Deucalionis Regio was referred to as 'Meridiani Border.' Analysis of thermal inertia, rock abundance, and albedo information derived from Viking images and Infrared Thermal Mapper (IRTM) data obtained 1977-80 also indicate that Deucalionis Regio has a surface of distinctly different physical properties when compared to Arabia, Sinus Meridiani, and Acidalia. Deucalionis Regio has a thermal inertia equivalent to the Martian average, a low rock abundance (less than 5 percent), and an intermediate albedo and color. Considerable effort by previous investigators has revealed a consistent model for the surface (upper few cm) properties of the endmember reigons Arabia, Sinus Meridiani, and Acidalia. Compared with these regions, we consider that Deucalionis Regio is not a region of either (1) unconsolidated, fine bright dust like Arabia, (2) considerable windblown unconsolidated sand like Sinus Meridiani, or (3) a rocky-and-sandy surface like Acidalia. Thus, we are forced to consider that either the surface of Deucalionis Regio is made of unconsolidated fine to medium sand (about 250 microns) of an unusual and previously unreported color and albedo, or that the surface is crusted, fine-grained weathered soil, and the thermal inertia is an indicator of the degree to which the surface sediments have become indurated. We favor the latter.

Merenyi, E.↗

Mapping of sea bottom topography

Under suitable conditions the bottom topography of shallow seas is visible in remote sensing radar imagery. Two experiments were performed to establish which remote sensing technique or combination yields optimal imaging of bottom topography and which hydro-meteorological conditions are favorable. A further goal is to gain experience with these techniques. Two experiments were performed over an area in the North Sea near the measuring platform Meetpost Noordwijk (MPN). The bottom topography in the test area is dominated by sand waves. The crests of the sand waves are perpendicular to the coast line and the dominating (tidal-)current direction. A 4x4 sq km wide section of the test area was studied in more detail. The first experiment was undertaken on 16 Aug. 1989. During the experiment the following remote sensing instruments were used: Landsat-Thematic Mapper, and NASA/JPL Airborne Imaging Radar (AIR). The hydro-meteorological conditions; current, wind, wave, and air and water temperature were monitored by MPN, a ship of Rijkswaterstaat (the OCTANS), and a pitch-and-roll WAVEC-buoy. The second experiment took place on 12 July 1992. During this experiment data were collected with the NASA/JPL polarimetric synthetic aperture radar (SAR), and a five-band helicopter-borne scatterometer. Again the hydro-meteorological conditions were monitored at MPN and the OCTANS. Furthermore, interferometric radar data were collected.

Calkoen, C. J.↗

Antipodal fragment velocities for porous and weak targets at catastrophic impacts

Mortar, porous alumina, and sand targets, which were spherical in shape and from 11 to 15 cm in diameter, were impacted normally by plastic (polycarbonate) projectiles of nearly 1 g in mass at velocities about 6 km/s. Fragment velocity at the antipole of impact site (antipodal velocity, V(sub a)), for each experiment, was obtained from two Flash X-ray images recorded prior to and at predetermined delayed time after impact event. It has been revealed that the velocities for the same E/M(sub t) (impact energy divided by target mass) depend strongly on target material, and differ about an order of magnitude between the sand and basalt.

Yanagisawa, M.↗

Resistance of Silicon Nitride Turbine Components to Erosion and Hot Corrosion/oxidation Attack

Silicon nitride turbine components are under intensive development by AlliedSignal to enable a new generation of higher power density auxiliary power systems. In order to be viable in the intended applications, silicon nitride turbine airfoils must be designed for survival in aggressive oxidizing combustion gas environments. Erosive and corrosive damage to ceramic airfoils from ingested sand and sea salt must be avoided. Recent engine test experience demonstrated that NT154 silicon nitride turbine vanes have exceptional resistance to sand erosion, relative to superalloys used in production engines. Similarly, NT154 silicon nitride has excellent resistance to oxidation in the temperature range of interest - up to 1400 C. Hot corrosion attack of superalloy gas turbine components is well documented. While hot corrosion from ingested sea salt will attack silicon nitride substantially less than the superalloys being replaced in initial engine applications, this degradation has the potential to limit component lives in advanced engine applications. Hot corrosion adversely affects the strength of silicon nitride in the 850 to 1300 C range. Since unacceptable reductions in strength must be rapidly identified and avoided, AlliedSignal and the NASA Lewis Research Center have pioneered the development of an environmental life prediction model for silicon nitride turbine components. Strength retention in flexure specimens following 1 to 3300 hour exposures to high temperature oxidation and hot corrosion has been measured and used to calibrate the life prediction model. Predicted component life is dependent upon engine design (stress, temperature, pressure, fuel/air ratio, gas velocity, and inlet air filtration), mission usage (fuel sulfur content, location (salt in air), and times at duty cycle power points), and material parameters. Preliminary analyses indicate that the hot corrosion resistance of NT154 silicon nitride is adequate for AlliedSignal's initial engine applications. Protective coatings and/or inlet air filtration may be required to achieve required ceramic component lives in more aggressive environments.

Strangmen, Thomas E.↗