Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Relative accuracy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Comparison of Artificial Compressibility Methods

Various artificial compressibility methods for calculating three-dimensional, steady and unsteady, laminar and turbulent, incompressible Navier-Stokes equations are compared in this work. Each method is described in detail along with appropriate physical and numerical boundary conditions. Analysis of well-posedness and numerical solutions to test problems for each method are provided. A comparison based on convergence behavior, accuracy, stability and robustness is used to establish the relative positive and negative characteristics of each method.

Kiris, Cetin↗
NASA NTRS2005

Depth-varying density and organization of chondrocytes in immature and mature bovine articular cartilage assessed by 3d imaging and analysis

Articular cartilage is a heterogeneous tissue, with cell density and organization varying with depth from the surface. The objectives of the present study were to establish a method for localizing individual cells in three-dimensional (3D) images of cartilage and quantifying depth-associated variation in cellularity and cell organization at different stages of growth. Accuracy of nucleus localization was high, with 99% sensitivity relative to manual localization. Cellularity (million cells per cm3) decreased from 290, 310, and 150 near the articular surface in fetal, calf, and adult samples, respectively, to 120, 110, and 50 at a depth of 1.0 mm. The distance/angle to the nearest neighboring cell was 7.9 microm/31 degrees , 7.1 microm/31 degrees , and 9.1 microm/31 degrees for cells at the articular surface of fetal, calf, and adult samples, respectively, and increased/decreased to 11.6 microm/31 degrees , 12.0 microm/30 degrees , and 19.2 microm/25 degrees at a depth of 0.7 mm. The methodologies described here may be useful for analyzing the 3D cellular organization of cartilage during growth, maturation, aging, degeneration, and regeneration.

Non-NASA Center↗
NASA NTRS1996

A New Milestone in Large-Scale Ocean Dynamics: The First Three Years of the TOPEX/POSEIDON Mission

The US/France TOPEX/POSEIDON satellite, which has been in orbit since August, 1992, is the first global ocean observing system specifically designed for studying ocean dynamics. The satellite uses a state-of-the-art radar altimeter system to determine the sea surface topography - the height of sea surface relative to a reference ellipsoid-with an unprecedented accuracy, and has returned a wealth of new information on the ocean circulation and its variations.

currents↗
NASA NTRS2012

SRT Evaluation of AIRS Version-6.02 and Version-6.02 AIRS Only (6.02 AO) Products

Version-6 contains a number of significant improvements over Version-5. This report compares Version-6 products resulting from the advances listed below to those from Version-5. 1. Improved methodology to determine skin temperature (T(sub s)) and spectral emissivity (Epsilon(sub v)). 2. Use of Neural-net start-up state. 3. Improvements which decrease the spurious negative Version-5 trend in tropospheric temperatures. 4. Improved QC methodology. Version-6 uses separate QC thresholds optimized for Data Assimilation (QC=0) and Climate applications (QC=0,1) respectively. 5. Channel-by-channel clear-column radiances R-hat(sub tau) QC flags. 6. Improved cloud parameter retrieval algorithm. 7. Improved OLR RTA. Our evaluation compared V6.02 and V6.02 AIRS Only (V6.02 AO) Quality Controlled products with those of Version-5.0. In particular we evaluated surface skin temperature T(sub s), surface spectral emissivity Epsilon(sub v), temperature profile T(p), water vapor profile q(p), OLR, OLR(sub CLR), effective cloud fraction alpha-Epsilon, and cloud cleared radiances R-hat(sub tau) . We conducted two types of evaluations. The first compared results on 7 focus days to collocated ECMWF truth. The seven focus days are: September 6, 2002; January 25, 2003; September 29, 2004; August 5, 2005; February 24, 2007; August 10, 2007; and May 30, 2010. In these evaluations, we show results for T(sub s), Epsilon(sub v), T(p), and q(p) in terms of yields, and RMS differences and biases with regard to ECMWF. We also show yield trends as well as bias trends of these quantities relative to ECMWF truth. We also show yields and accuracy of channel by channel QC d values of R-hat(sub tau) for V6.02 and V6.02 AO. Version-5 did not contain channel by channel QC d values of R-hat(sub tau). In the second type of evaluation, we compared V6.03 monthly mean Level-3 products to those of Version-5.0, for four different months: January, April, July, and October; in 3 different years 2003, 2007, and 2011. In particular, we compared V6.03 and V5.0 trends of T(p), q(p), alpha-Epsilon, OLR, and OLR(sub CLR) computed based on results for these 12 time periods

Susskind, Joel↗
NASA NTRS2017

Feature Detection and Curve Fitting Using Fast Walsh Transforms for Shock Tracking: Applications

Walsh functions form an orthonormal basis set consisting of square waves. Square waves make the system well suited for detecting and representing functions with discontinuities. Given a uniform distribution of 2p cells on a one-dimensional element, it has been proven that the inner product of the Walsh Root function for group p with every polynomial of degree < or = (p - 1) across the element is identically zero. It has also been proven that the magnitude and location of a discontinuous jump, as represented by a Heaviside function, are explicitly identified by its Fast Walsh Transform (FWT) coefficients. These two proofs enable an algorithm that quickly provides a Weighted Least Squares fit to distributions across the element that include a discontinuity. The detection of a discontinuity enables analytic relations to locally describe its evolution and provide increased accuracy. Time accurate examples are provided for advection, Burgers equation, and Riemann problems (diaphragm burst) in closed tubes and de Laval nozzles. New algorithms to detect up to two C0 and/or C1 discontinuities within a single element are developed for application to the Riemann problem, in which a contact discontinuity and shock wave form after the diaphragm bursts.

Gnoffo, Peter A.↗
NASA NTRSDate not supplied

Multi-Wavelength Modeling and Analysis of the Center-to-Limb Effects of Solar Spectroscopy and Helioseismology

An accurate interpretation of observed solar dynamics with different instruments requires modeling solar magnetoconvection indifferent regimes, as well as taking into account center-to-limb effects, magnetic fields, and turbulence. Realistic 3D radiative MHD modeling of the solar magnetoconvection and atmosphere allows us to generate synthetic observables that directly link the physical properties of the solar plasma to spectroscopic and helioseismic observables. In this work, we investigate the influence of the center-to-limb effects for a wide range of wavelengths, which correspond to the operational lines of HMI/SDO, Hinode, DKIST, and other instruments. In particular, we discuss the wavelength-dependency of the center-to-limb helioseismic observations of acoustic travel times that are used for diagnostics of the deep meridional circulation, as well as 'concave' Sun effect. The presented study will support interpretation of helioseismic inversion results by taking into account realistic coupling of subsurface and atmosphere, and geometry-related effects. In particular, it allows us to improve accuracy of solar subsurface measurements from the SoHO and SDO missions, and resolve the long-standing problem of the meridional circulation and evolution with the solar cycle.

SMD↗
NASA NTRS2004

Experimental design for the LATOR mission

This paper discusses experimental design for the Laser Astrometric Test Of Relativity (LATOR) mission. LATOR is designed to reach unprecedented accuracy of 1 part in 108 in measuring the curvature of the solar gravitational field as given by the value of the key Eddington post-Newtonian parameter γ. This mission will demonstrate the accuracy needed to measure effects of the next post- Newtonian order (∝ G2) of light deflection resulting from gravity’s intrinsic non-linearity.

Nordtvedt, Kenneth Jr.↗
NASA NTRS2002

The StarLight mission: a formation-flying stellar interferometer

The StarLight mission is designed to validate the technologies of formation flying and stellar interferometry in space. The mission consists of two spacecraft in an earth-trailing orbit that formation fly over relative ranges of 40 to 600 m to an accuracy of 10 cm.

formation-flying↗
DOE OSTI2020

Innovation in Radiological Security, Part 2 of 2 – Insights into Developing a Cloud-hosted Security Technology

A Sentry Remote Monitoring System (Sentry-RMS) is a stand-alone security system that provides detection, assessment, and communication of priority alarms as an additional means of thwarting internal and external threats to sites that maintain radiological material. The SEntry-RMS CommUnications and REsponse (Sentry-SECURE) platform is an optional feature of the Sentry-RMS that relays priority alarm information to the identified response stakeholders. Sentry-SECURE is hosted in a cloud environment that abstracts the data owner’s and data consumer’s platforms to allow for greater information sharing. This promotes situational awareness amongst authorized users and enables future innovation among modern response platforms. When securely architecting a cloud solution such as this, the use of design paradigms can be an effective tool to increase the accuracy and reliability of cyber- and information-security-related decisions made throughout the development process. This approach also supports the categorization of design considerations into three levels: industry concepts, project approaches, and data protections for digital processes. Industry concepts consist of the notional underpinnings that guide or motivate a security process, system, or design but often lack any tangible attributes. Project approaches represent decisions made during the design and development process to prioritize a solution, method, or practice above another that may provide a comparable functional output but lacks a desired security benefit. Data protections for digital processes represent the selection, integration, and implementation of specific controls for a given asset. This paper will explore specific examples of how Sentry-SECURE has been designed to account for considerations at each of these three levels, while balancing the operational intent of the platform with the security enhancements necessary to maintain data integrity, availability, and confidentiality.

assessment, RMS, security, physical, cloud, Cyber ↗
DOE OSTI2022

Fault Characterization and Diagnostics Supporting Condition-Based Operation and Maintenance of Gas Turbine Engines

Condition-Based Operation and Maintenance (CBOM) is the state-of-the-art in maintenance approaches for gas turbine engines. CBOM applies engine sensor information to the optimization of future operation and maintenance procedures; this technique reduces costs for engine operators by minimizing unplanned outages and catastrophic engine degradation. However, due to the complexities of gas turbine operation and the lack of available engine sensors, further development is required to fully realize the benefits of CBOM. In the turbine section, rotating components interact with high temperature flows, which creates intense thermal and mechanical stresses. As a result, there are numerous mechanisms of component degradation in the turbine section. Furthermore, turbine components – like stator vanes and rotor blades – are among the most expensive in the engine because they are complex to design and manufacture. For these reasons, this dissertation addresses two main questions: (i) which parameters or faults within the turbine section are most important to monitor, and (ii) how can these parameters or faults be monitored in an engine-relevant environment? Although many turbine parameters and faults have been investigated in the open literature, there are some faults that are still not well understood. Rotor-casing eccentricity, which causes a non-constant blade tip clearance around the annulus, has not been investigated in terms of its effects on turbine efficiency. Therefore, the first study in this dissertation quantifies overall and local turbine efficiency for varying levels of rotor-casing eccentricity. Results showed negligible variations to overall turbine efficiency, meaning rotor-casing eccentricity only becomes relevant to CBOM when its severity causes rotordynamic issues. Purge flow is critical to turbine hardware longevity because it prevents ingestion of hot main gas path (MGP) flow into the under-platform regions. Despite its importance, there are currently no methods for monitoring purge flow performance in an engine environment. Therefore, the second study in this dissertation develops a predictive model for sealing effectiveness using inputs from two fast-response pressure sensors. Results exhibited low prediction errors across a full range of purge flow rates, which supports the viability of the modelling approach for CBOM. The final two studies in this dissertation address blade coolant flow monitoring. This cooling flow is responsible for protecting the turbine blades from the MGP flow, which exits the combustor at temperatures greater than the blade melting point. These studies showed that temperature measurements on the blade surface can be used to accurately predict blade coolant flow rate, and that defining the candidate features relative to the coolant trajectory is important for maintaining accuracy as coolant flow rate degradation occurs. This work enables blade coolant flow monitoring, which is currently not possible through existing condition monitoring techniques.

condition-based, gas turbines, diagnostics,↗
DOE OSTI2024

Transforming the Bootstrap: Using Transformers to Compute Scattering Amplitudes in Planar N = 4 Super Yang-Mills Theory

We pursue the use of deep learning methods to improve state-of-the-art computations in theoretical high-energy physics. Planar N = 4 Super Yang-Mills theory is a close cousin to the theory that describes Higgs boson production at the Large Hadron Collider; its scattering amplitudes are large mathematical expressions containing integer coefficients. In this paper, we apply Transformers to predict these coefficients. The problem can be formulated in a language-like representation amenable to standard cross-entropy training objectives. We design two related experiments and show that the model achieves high accuracy (> 98%) on both tasks. Our work shows that Transformers can be applied successfully to problems in theoretical physics that require exact solutions.

Lance, Dixon↗
NASA NTRS1980

Magnetic tape lightning current detectors

Development and application tests of a low cost, passive, peak lightning current detector (LCD) found it to provide measurements with accuracies of + or - 5 percent to + or - 10 percent depending on the readout method employed. The LCD uses magnetic audio recording tape to sense the magnitude of the peak magnetic field around a conductor carrying lightning currents. The test results showed that the length of audio tape erased was linearly related to the peak simulated lightning currents in a round conductor. Accuracies of + or - 10 percent were shown for measurements made using a stopwatch readout technique to determine the amount of tape erased by the lightning current. Where more accurate data are desired, the tape is played and the output recorded on a strip chart, oscilloscope, or some other means so that measurements can be made on that recording. Conductor dimensions, tape holder dimensions, and tape formulation must also be considered to obtain a more accurate result.

Crouch, K. E.↗
DOE OSTI2024

An open-source framework for balancing computational speed and fidelity in production cost models

Studies of bulk power system operations need to incorporate uncertainty and sensitivity analyses, especially around exposure to weather and climate variability and extremes, but this remains a computational modeling challenge. Commercial production cost models (PCMs) have shorter runtimes, but also important limitations (opacity, license restrictions) that do not fully support stochastic simulation. Open-source PCMs represent a potential solution. They allow for multiple, simultaneous runs in high-performance computing environments and offer flexibility in model parameterization. Yet, developers must balance computational speed (i.e. runtime) with model fidelity (i.e. accuracy). In this paper, we present Grid Operations (GO), a framework for instantiating open-source, scale-adaptive PCMs. GO allows users to search across parameter spaces to identify model versions that appropriately balance computational speed and fidelity based on experimental needs and resource limits. Results provide generalizable insights on how to navigate the fidelity and computational speed tradeoff through parameter selection. We show that models with coarser network topologies can accurately mimic market operations, sometimes better than higher-resolution models. It is thus possible to conduct large simulation experiments that characterize operational risks related to climate and weather extremes while maintaining sufficient model accuracy.

42 ENGINEERING↗
DOE OSTI2022

VWC-BERT: Scaling Vulnerability–Weakness–Exploit Mapping on Modern AI Accelerators

Defending cybersystems needs accurate mapping of software and hardware vulnerabilities to generalized descriptions of weaknesses, and weaknesses to exploits. These mappings enable cyber defenders to build plans for effective defense and assessment of potential risks to a cybersystem. With close to 170k vulnerabilities, manual mapping is not a feasible option. However, automated mapping is challenging due to limited training data, computational intractability, and limitations in computational natural language processing. Tools based on breakthroughs in Transformer-based language models have been demonstrated to classify vulnerabilities with high accuracy. We make three key contributions in this paper: (1) We present a new framework, \VWCBERT, that augments the Transformer-based hierarchical multi-class classification framework of Das et al. (\textsc{V2W-BERT}) with the ability to map weaknesses to exploits. (2) We implement \VWCBERT~ on modern AI accelerator platforms using two data parallel techniques for the pre-training phase and demonstrate nearly linear speedups across NVIDIA and Graphcore accelerator platforms. We observe nearly linear speedups for up to 16 V100 and 8 A100 GPUs, and about 3.4$\times$ speedup for A100 relative to V100 GPUs. We also observe excellent speedups on Graphcore, with $5.7\times$ speedup on 128 IPUs relative to 16 IPUs. Enabled by scaling, we also demonstrate higher accuracy using a larger language model, RoBERTa-Large. We show up to 87\% accuracy for strict and up to 98\% accuracy for relaxed classification. (3) We develop a novel parallel link manager for the link prediction phase and demonstrate up to 21$\times$ speedup with 16 V100 GPUs relative to one V100 GPU, and thus reducing the runtime from 2.5 hours to 10 minutes. We believe that generalizability and scalability of \VWCBERT~ will benefit both the theoretical development and practical deployment of novel cyberdefense solutions and vulnerability classification.

Das, Siddhartha Shankar↗
NASA NTRS2017

Accounting for the Speed-Accuracy Trade-Off in Quantifying Human-In-The-Loop Error Probabilities

Human-in-the-loop (HITL) simulations cannot collect enough data from human operators to validate estimates of error probabilities for task components. Error rates for tasks have been estimated by using laboratory data for error rates depending on variables such as the cognitive complexity of the task. The limited channel capacity of human operators compels error rates to be strongly related to the time available for the task, the speed-accuracy trade-off. HITL simulations can provide valuable data on the time available for the operator's tasks. We propose that the response times be used in conjunction with measured speed-accuracy curves to estimate the operator error rates contributing to mission failure. Such analyses should be especially important in the estimation of error rates in off-nominal situations.

probability↗
NASA NTRS1981

Modeling misregistration and related effects on multispectral classification

The effects of misregistration on the multispectral classification accuracy when the scene registration accuracy is relaxed from 0.3 to 0.5 pixel are investigated. Noise, class separability, spatial transient response, and field size are considered simultaneously with misregistration in their effects on accuracy. Any noise due to the scene, sensor, or to the analog/digital conversion, causes a finite fraction of the measurements to fall outside of the classification limits, even within nominally uniform fields. Misregistration causes field borders in a given band or set of bands to be closer than expected to a given pixel, causing additional pixels to be misclassified due to the mixture of materials in the pixel. Simplified first order models of the various effects are presented, and are used to estimate the performance to be expected.

Billingsley, F. C.↗
NASA NTRS1990

Autonomous landing on Mars

Long communication times between earth and Mars demand autonomous landing capabilities. If high-resolution imagery acquired from an orbiter is available to select and certify a specific safe landing site or sites, navigational updates relative to the surface can be used to achieve the necessary accuracy to land within these certified sites. Autonomous registrations of the orbiter's imagery with photographs of the landing area taken by the lander during descent can provide the necessary accuracy and robustness. If orbital imagery is not available, autonomous hazard recognition and avoidance will be required to guide the lander to a hazard-free site. Feature extraction and matching algorithms, applied to visible light imagery and optimized to the terrain discovered by the Viking landers, can provide both an accurate surface-relative navigational update capability and a hazard recognition capability.

Stevenson, John↗
NASA NTRS1974

Effect of atmospheric haze and sun angle on automatic classification of ERTS-1 data

The effect of variations in sun angle and haze level on the accuracy of automatic classification of Earth Resources Technology Satellite-1 (ERTS-1) data was studied by classifying ERTS imagery in which such variations were computer-simulated. It was found that relatively small changes in sun angle and haze level can substantially reduce classification accuracy.

Potter, J.↗