Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Refractory material”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

THE PUZZLE OF TWO DIFFERENT SUB-MICROMETER TUNGSTEN-RICH DEPOSITS IN BULK YBCO: ONE ACTS AS PINNING CENTERS AND THE OTHER DOES NOT

Two types of large grain YBCO samples doped with tungsten oxide, one with platinum and the other without, were produced using a slow cooling process. Observations of the trapped magnetic flux density showed that the flux density of the W-doped, Pt-free samples did not change with W doping levels of up to 2.1 mol%. In contrast, the (W+Pt)-doped samples resulted in a monotonic improvement in trapped magnetic flux density as a function of W doping. Microstructure studies indicate that both types of samples contain profuse sub-micrometer deposits of a W-rich compound. The Pt-free samples contain (W{sub 0.4}Y{sub 0.6})BaO{sub 3} deposits while the (W+Pt)-doped samples contain deposits of a (W{sub 0.5}Pt{sub 0.5})YBa{sub 2}O{sub 6} compound. Both types of deposits are of essentially the same size and have comparable number density. The results are strikingly similar to an earlier experiment in which uranium doped, Pt-free, large grain YBCO also did not show any improvement in trapped magnetic flux density. The U-doped, Pt-free samples contain profuse sub-micrometer deposits of a (U{sub 0.4}Y{sub 0.6})BaO{sub 3} compound, which have been shown to be ferromagnetic. The inability of both the (W{sub 0.4}Y{sub 0.6})BaO{sub 3} and (U{sub 0.4}Y{sub 0.6})BaO{sub 3} sub-micrometer deposits to act as pinning centers in self-field, suggest that this behavior is systematic.

36 MATERIALS SCIENCE↗

Transient phenomena in the dielectric breakdown of HfO{sub 2} optical films probed by ultrafast laser pulse pairs

The laser induced breakdown threshold of HfO{sub 2} films is studied with single pairs of pulses of variable delay and 50 fs and 1 ps pulse duration. Two distinct transient regimes are observed that can be related to the relaxation of the electron density from the conduction band via an intermediate state to the valence band. The experimental results are in good agreement with a theoretical model that assumes occupation of mid gap states after the first pulse on a time scale of several tens of picoseconds and subsequent decay of this population via recombination with holes in the valence band on a time scale of several tens of milliseconds.

36 MATERIALS SCIENCE↗

Transcription of domain patterns in near-stoichiometric magnesium-doped lithium niobate

Recently, light-induced domain reversal has been developed to a promising method for domain engineering, but the depth of reversed domain is only of several tens of microns, which greatly limits its practical applications. In this Letter, we fabricated domain patterns on the -z face of 1.0 mol % Mg doped near-stoichiometric lithium niobate with the assistance of a focal 532 nm laser, and then succeeded to transcribe these domain patterns from the -z to the +z face by applying external field without laser illumination. The transcribed domains have much larger depths, can sustain more than 100 times of the transcription cycles without large deformation, and can be erased by one transcription cycle with illumination of 532 nm laser. Finally, a light-induced ferroelectric domain transcription model was proposed.

36 MATERIALS SCIENCE↗

Investigations On Stoichiometry And Melting Behavior Of NaY(WO{sub 4}){sub 2}

Differential thermal analysis (DTA) and X-ray diffraction (XRD) studies were carried out to understand the melting behavior of the NaY(WO{sub 4}){sub 2}, an important functional material used for the laser production. It has been observed that the stoichiometric NaY(WO{sub 4}){sub 2} composition forms a solution with another phase of the Na{sub 2}WO{sub 4}-Y{sub 2}(WO{sub 4}){sub 3} pseudo-binary system. This is found to be detrimental for the growth of single crystals of the material. Therefore, molar fraction in the starting charge was suitably altered to successfully restrict the formation of the undesired phase in the melt. A composition is suggested for the favorable crystal growth of this material.

36 MATERIALS SCIENCE↗

Electric Discharge Sintering and Joining of Tungsten Carbide--Cobalt Composite with High-Speed Steel Substrate

Simultaneous electro discharge sintering of high strength structure of tungsten carbide-cobalt composite and connection it with high-speed steel substrate is investigated and suitable operating parameters are defined. Tungsten carbide-cobalt and high-speed steel joining was produced by the method of high voltage electrical discharge together with application of mechanical pressure to powder compact. It was found that the density and hardness of composite material reach its maximum values at certain magnitudes of applied pressure and high voltage electrical discharge parameters. We show that there is an upper level for the discharge voltage beyond which the powder of composite material disintegrates like an exploding wire. Due to our results it is possible to determine optimal parameters for simultaneous electro discharge sintering of WC-Co and bonding it with high-speed steel substrate.

36 MATERIALS SCIENCE↗

Growth rate induced monoclinic to tetragonal phase transition in epitaxial BiFeO{sub 3} (001) thin films

Epitaxial BiFeO{sub 3} thin films were deposited on SrRuO{sub 3} buffered SrTiO{sub 3} (001) substrates at different growth rates by varying the radio frequency sputtering power. With increasing growth rate, the crystal structure of BiFeO{sub 3} films develops from monoclinic lattice to a mixture phase of tetragonal lattice T{sub 1} with c/a{approx}1.05 and giant tetragonal lattice T{sub 2} with c/a{approx}1.23, finally to a single tetragonal phase T{sub 2}, as shown by high resolution synchrotron x-ray diffraction reciprocal space mappings. The observed phase transitions, induced by film growth rate, offer an alternative strategy to manipulate crystalline phases in epitaxial ferroelectric thin films.

36 MATERIALS SCIENCE↗

Electronic structure of cation-codoped TiO{sub 2} for visible-light photocatalyst applications from hybrid density functional theory calculations

The electronic structures of Mg/Ca- and/or Mo/W- (mono- and co-) doped anatase TiO{sub 2} have been investigated via generalized Kohn-Sham theory with the Heyd-Scuseria-Ernzerhof hybrid functional for exchange-correlation (J. Heyd et al., [J. Chem. Phys. 118, 8207 (2003)], J. Heyd et al., [J. Chem. Phys. 124, 219906 (2006)], and J. Paier et al., [J. Chem. Phys. 125, 249901 (2006)]), in the context of density functional theory. Gap narrowing is small for monodoping, which also creates impuritiy bands in the ''forbidden gap,'' either as acceptor or donor states, limiting possible utility as visible-light photocatalysts. However, codoping of Mg/Ca and Mo/W not only induces appreciable gap narrowing, but also serves to passivate the impurity bands, which can harvest visible-light to a greater extent. Considering ionic radii, Mg and Mo should constitute the best cation-pair.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Micro Electro Discharge Machining of Electrically Nonconductive Ceramics

EDM is a known process for machining of hard and brittle materials. Due to its noncontact and nearly forceless behaviour, it has been introduced into micro manufacturing and through constant development it is now an important means for producing high-precision micro geometries. One restriction of EDM is its limitation to electrically conducting materials.Today many applications, especially in the biomedical field, make use of the benefits of ceramic materials, such as high strength, very low wear and biocompatibility. Common ceramic materials such as Zirconium dioxide are, due to their hardness in the sintered state, difficult to machine with conventional cutting techniques. A demand for the introduction of EDM to these materials could so far not be satisfied because of their nonconductive nature.At the Chemnitz University of Technology and the Fraunhofer IWU, investigations in the applicability of micro-EDM for the machining of nonconductive ceramics are being conducted. Tests are undertaken using micro-EDM drilling with Tungsten carbide tool electrodes and ZrO{sub 2} ceramic workpieces. A starting layer, in literature often referred to as 'assisting electrode' is used to set up a closed electric circuit to start the EDM process. Combining carbon hydride based dielectric and a specially designed low-frequency vibration setup to excite the workpiece, the process environment can be held within parameters to allow for a constant EDM process even after the starting layer is machined. In the experiments a cylindrical 120 {mu}m diameter Tungsten carbide tool electrode and Y{sub 2}O{sub 3}- and MgO- stabilized ZrO{sub 2} worpieces are used. The current and voltage signals of the discharges within the different stages of the process (machining of the starting layer, machining of the base material, transition stage) are recorded and their characteristics compared to discharges in metallic material. Additionally, the electrode feed is monitored. The influences of the process parameters are analysed with regard to the discharge type, electrode wear and process speed.Using the found parameters, micro geometries can be successfully machined into nonconductive Y{sub 2}O{sub 3}- and MgO- stabilized ZrO{sub 2} ceramic by means of micro-EDM.

36 MATERIALS SCIENCE↗

High-k (k=30) amorphous hafnium oxide films from high rate room temperature deposition

Amorphous hafnium oxide (HfO{sub x}) is deposited by sputtering while achieving a very high k{approx}30. Structural characterization suggests that the high k is a consequence of a previously unreported cubiclike short range order in the amorphous HfO{sub x} (cubic k{approx}30). The films also possess a high electrical resistivity of 10{sup 14} {Omega} cm, a breakdown strength of 3 MV cm{sup -1}, and an optical gap of 6.0 eV. Deposition at room temperature and a high deposition rate ({approx}25 nm min{sup -1}) makes these high-k amorphous HfO{sub x} films highly advantageous for plastic electronics and high throughput manufacturing.

36 MATERIALS SCIENCE↗

Light, Strong Insulating Tiles

Improved lightweight insulating silica/aluminum borosilicate/silicon carbide tiles combine increased tensile strength with low thermal conductivity. Changes in composition substantially improve heat-insulating properties of silica-based refractory tile. Silicon carbide particles act as high-emissivity radiation scatterers in tile material.

Cordia, E.↗

Heat-Transfer Coefficients for a Full-Scale Pebble-Bed Heater

Large quantities of high-temperature air are needed for work with hypersonic flight problems. At temperatures above 2500 degrees Reamur, where conventional heat exchangers have exceeded their material limits, regenerative pebble-bed exchangers may be used with high-temperature refractories. The design of such a heat exchanger requires the use of reliable heat-transfer coefficients for a packed bed. Considerable data are available on the subject, but they spread over two orders of magnitude at any one Reynolds number value. The facility from which the present data were obtained is used at the Lewis Research Center (NASA) for testing air-breathing engine components. The purpose of this work was to obtain heat-transfer data during the initial operation of the bed as a guide to the design of similar equipment. The facility was designed with a conservative estimate of the heat-transfer coefficient, and is shown schematically. Temperatures throughout the packing were measured continuously so that point values of the coefficient might be obtained.

Lancashire, R. B.↗

Thermal spray forming of refractory sample ampoule cartridges for single crystal growth space furnaces

A thermal spray process is being used to build up refractory metals and ceramics into a containment cartridge for high temperature, single crystal semiconductor growth experiments. This process uses high energy plasma inside a low pressure (100-200 torr) inert environment to apply layers of material onto a removable mandrel. A variety of materials are being characterized and evaluated against a demanding set of requirements, including high service temperature (1700 C), oxidation resistance, and resistance to liquid metal attack. Techniques to spray form refractory metals (tungsten, molybdenum, niobium, tantalum) and ceramics (alumina, boron nitride) are being developed in the Plasma Spray Cell at Marshall Space Flight Center. These plasma spray formed materials have been evaluated for mechanical properties, density, microstructure, and resistance to liquid metal attack. Forming techniques and the resultant mechanical and metallurgical properties will be presented.

Zimmerman, Frank↗

Thermal spray forming of refractory sample ampoule cartridges for single crystal growth space furnaces

A thermal spray process is being used to build up refractory metals and ceramics into a containment cartridge for high temperature, single crystal semiconductor growth experiments. This process uses high energy plasma inside a low pressure (100-200 torr) inert environment to apply layers of material onto a removable mandrel. A variety of materials are being characterized and evaluated against a demanding set of requirements, including high service temperature (1700 C), oxidation resistance, and resistance to liquid metal attack. Techniques to spray form refractory metals (tungsten, molybdenum, niobium, tantalum) and ceramics (alumina, boron nitride) are being developed in the Plasma Spray Cell at Marshall Space Flight Center. These plasma spray formed materials have been evaluated for mechanical properties, density, microstructure, and resistance to liquid metal attack. Forming techniques and the resultant mechanical and metallurgical properties are presented.

Zimmerman, Frank↗

History and State of the Art in Advanced Thermal Protection Systems

This report documents the current state of the art of thermal protection systems (TPS) relevant to missile application materials and MTCR control language. The information is intended to provide data on current TPS for determining the current state of development and identifying potential research directions. Various vehicle configurations and types of TPS are described, including the evolution of materials and systems. Vehicle configurations such as high drag rocket and capsule systems and low-drag air-breathers are discussed. TPS are complex, transitioning from often very low temperatures to temperatures exceeding 3000°C and heat fluxes of up to 30,000 W/cm 2 . They can take the form of blankets, sheets, tiles and fabricated rigid structures, and can be made from high temperature capable alloys, refractory metals, ceramics, ceramic matrix composites, ultra-high temperature ceramics, carbon-carbon composites or ablative carbonaceous materials. Current state of the art in TPS is based on materials any systems developed for the initial space program. TPS was upgraded to the point of the Space Shuttle development and has stagnated since them.

36 MATERIALS SCIENCE↗

Re-examining the prospects of aluminous cements based on alkali-earth and rare-earth oxides

In the family of aluminous cements the potential of strontium aluminate, the strontium-barium aluminate and the barium aluminate cements have been sporadically and incoherently studied over several decades in various parts of the world and more particularly in the East European countries without much wide-spread commercial success. Attempts had also been made to extend the exploratory studies to the (Ca, Sr, Ba)O-Al{sub 2}O{sub 3}-ZrO{sub 2}-HfO{sub 2} system to synthesize super-refractory binders. In fact, the above compositions, prima facie, seem to have the potential of arriving at cementitious formulations that, apart from being super-refractory, may as well be highly resistant to seawater, X-rays and gamma radiation. Looking at these potentials, quite a few experimental studies have been carried out under the guidance and supervision of the present author. The present paper is an endeavour to collate the data on some of these systems both from the published literature as well as from the author's findings. The prime motive has been to review and re-assess the prospects of manufacturing a range of new aluminous binders with superior properties.

36 MATERIALS SCIENCE↗

High-throughput additive manufacturing and characterization of refractory high entropy alloys

Refractory High Entropy Alloys (RHEAs) and Refractory Complex Concentrated Alloys (RCCAs) are high-temperature structural alloys ideally suited for use in harsh environments. While these alloys have shown promising structural properties at high temperatures that exceed the practical limits of conventional alloys, such as Ni-based superalloys, exploration of the complex phase-space of these materials remains a significant challenge. We report on a high-throughput alloy processing and characterization methodology, leveraging laser-based metal additive manufacturing (AM) and mechanical testing techniques, to enable rapid exploration of RHEAs/RCCAs. We utilized in situ alloying and compositional grading, unique to AM processing, to rapidly-produce RHEAs/RCCAs using readily available and inexpensive commercial elemental powders. We demonstrate this approach with the MoNbTaW alloy system, as a model material known for having exceptionally high strength at elevated temperature when processed using conventional methods (e.g., casting). Microstructure analysis, chemical composition, and strain rate dependent hardness of AM-processed material are presented and discussed in the context of understanding the structure-properties relationships of RHEAs/RCCAs.

36 MATERIALS SCIENCE↗