Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFRACTIVE INDEX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Linear optical characterization of transparent thin films by the Z-scan technique

We report experimental characterization of a very small rectangular phase shift (<0.3 rad) obtained from the far-field diffraction patterns using a closed aperture Z-scan technique. The numerical simulations as well as the experimental results reveal a peak-valley configuration in the far-field normalized transmittance, allowing us to determine the sign of the dephasing. The conditions necessary to obtain useful Z-scan traces are discussed. We provide simple linear expressions relating the measured signal to the phase shift. A very good agreement between calculated and experimental Z-scan profiles validates our approach. We show that a very well known nonlinear characterization technique can be extended for linear optical parameter estimation (as refractive index or thickness).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancing light out-coupling of organic light-emitting devices using indium tin oxide-free low-index transparent electrodes

With its increasing and sufficient conductivity, the conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) has been capable of replacing the widely used but less cost-effective indium tin oxides (ITOs) as alternative transparent electrodes for organic light-emitting devices (OLEDs). Intriguingly, PEDOT:PSS also possesses an optical refractive index significantly lower than those of ITO and typical organic layers in OLEDs and well matching those of typical OLED substrates. Optical simulation reveals that by replacing ITO with such a low-index transparent electrode, the guided modes trapped within the organic/ITO layers in conventional OLEDs can be substantially suppressed, leading to more light coupled into the substrate than the conventional ITO device. By applying light out-coupling structures onto outer surfaces of substrates to effectively extract radiation into substrates, OLEDs using such low-index transparent electrodes achieve enhanced optical out-coupling and external quantum efficiencies in comparison with conventional OLEDs using ITO.

36 MATERIALS SCIENCE↗

Further reduction of efficiency droop effect by adding a lower-index dielectric interlayer in a surface plasmon coupled blue light-emitting diode with surface metal nanoparticles

Further reduction of the efficiency droop effect and further enhancements of internal quantum efficiency (IQE) and output intensity of a surface plasmon coupled, blue-emitting light-emitting diode (LED) by inserting a dielectric interlayer (DI) of a lower refractive index between p-GaN and surface Ag nanoparticles are demonstrated. The insertion of a DI leads to a blue shift of the localized surface plasmon (LSP) resonance spectrum and increases the LSP coupling strength at the quantum well emitting wavelength in the blue range. With SiO{sub 2} as the DI, a thinner DI leads to a stronger LSP coupling effect, when compared with the case of a thicker DI. By using GaZnO, which is a dielectric in the optical range and a good conductor under direct-current operation, as the DI, the LSP coupling results in the highest IQE, highest LED output intensity, and weakest droop effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Reconfigurable and ultra-sensitive in-line Mach-Zehnder interferometer based on the fusion of microfiber and microfluid

A reconfigurable Mach-Zenhnder interferometer (MZI) based on a microfluidic cavity (MFC) constructed by embedding a microfiber between two segments of single-mode fibers with pre-designed lateral offset has been proposed and experimentally demonstrated. The MFC serves as an interference arm with an eccentric annular cross section and allows convenient sample (gas or liquids) replacement procedure. The microfiber works as the other interference arm that provides the proposed device with ease of reconstruction and also enhances the force sensitivity. The re-configurability and the ultra-wide tuning sensitivity range are demonstrated by immersing the MZI constructed with a 484 μm-long-MFC and a microfiber 44 μm in diameter in different droplets. Ultrahigh sensitivities of 34.65 nm/°C (∼88 380 nm/RIU) and −493.7 nm/N (∼−590 pm/με) are experimentally achieved using a droplet with a refractive index of ∼1.44.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light refraction in sapphire plates with a variable angle of crystal optical axis to the surface

The modification of sapphire by inhomogeneous plastic deformation makes it possible to obtain plates with a variable angle of inclination of the crystal optical axis to the plate surface. The refraction of light in this plate at perpendicular and oblique incidence of a parallel beam of rays is considered. The algorithm of calculating the refractive index of extraordinary ray and the birefringence is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical properties of post-annealed ZnO:Al thin films studied by spectroscopic ellipsometry

In this paper, effects of the thermal annealing on the structural, electrical, and optical properties of Al-doped ZnO (ZnO:Al) thin films prepared by reactive radio-frequency sputtering were investigated. From the X-ray diffraction observations, the orientation of ZnO:Al films was found to be a c-axis in the hexagonal structure. The optical properties of the films were investigated by optical transmittance and spectroscopic ellipsometry characterization. Based on Tauc–Lorentz model, the optical constants of ZnO:Al films were extracted in the photon energy ranging from 1.0 to 4.5 eV. Our result showed that the refractive index and extinction coefficient of the films changed consistently with annealing temperature.

36 MATERIALS SCIENCE↗

Zirconium doped TiO{sub 2} thin films: A promising dielectric layer

In the present work, we have fabricated the zirconium doped TiO{sub 2} thin (ZTO) films from a facile spin – coating method. The addition of Zirconium in TiO{sub 2} offers conduction band offset to Si and consequently decreased the leakage current density by approximately two orders as compared to pure TiO{sub 2} thin (TO) films. The ZTO thin film shows a high dielectric constant 27 with a very low leakage current density ∼10{sup −8} A/cm{sup 2}. The oxide capacitate, flat band voltage and change in flat band voltage are 172 pF, -1.19 V and 54 mV. The AFM analysis confirmed the compact and pore free flat surface. The RMS surface roughness is found to be 1.5 Å. The ellipsometry analysis also verified the fact with a high refractive index 2.21.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comment on the reported fiber attenuations in the visible regime in 'Fabrication of glass photonic crystal fibers with a die-cast process'

We comment on the recent paper by Zhou et al. [Appl. Opt.45, 4433 (2006)APOPAI0003-693510.1364/AO.45.004433], in which transmission losses of 0.2-0.3 dB/m were claimed across the wavelength range 420-900 nm in a high-index (nd=1.80518 at 587.6 nm) SF6 glass-based photonic crystal fiber fabricated by novel die-cast technique. If confirmed, these losses are at least 1 order of magnitude lower than previous reported losses of SF6 photonic crystal fibers from other fabrication approaches. Here we present a statistic survey on the relationship between the refractive index and the bulk material attenuation, based on a large number of commercial Schott optical glasses with the nd ranging between 1.40 and 2.05. It shows that the loss of a high-index (nd=1.80) glass optical fiber should be at the levels of 10-50 dB/m at 420 nm and 1-10 dB/m at 500 nm, respectively. Moreover, the material attenuation of such a high-index glass fiber should intrinsically show a large decay, from 10-50 dB/m at 420 nm to the level of 1 dB/m at 700 nm, which arises from the tail on the UV absorption edge of the high-index glass extending to the visible region. Therefore, we conclude that: (1) the low loss of 0.2-0.3 dB/m reported in the cited paper is abnormally one or two magnitudes lower than the material attenuation that a high-index (nd=1.80) glass optical fiber should have in the range between 420 and 500 nm and that (2) the flat loss curve between 420 and 700 nm in the cited paper deviates greatly from the intrinsic behavior of a high-index (nd=1.80) glass fiber.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of cation compositions on the electronic properties and optical dispersion of indium zinc tin oxide thin films by electron spectroscopy

Highlights: • REELS analysis can provide optical dispersion and electronic properties of oxide materials. • The band gap varied with In/Zn/Sn compositions and increased after annealing. • The optical properties were examined using REELS in conjunction with the Tougaard–Yubero model. • The dispersion parameters were determined by a single-oscillator Wemple–DiDomenico model. • The Zn and Sn contents play a crucial role in determining the single-oscillator constant and dispersion energy of IZTO thin films. - Abstract: The electronic properties and optical dispersion of indium zinc tin oxide (IZTO) films with different cation compositions were investigated by reflection electron energy loss spectroscopy (REELS). The REELS spectra of IZTO films revealed that the band gap varied with different Sn/Zn ratios and In content. The optical properties were examined with REELS data using Tougaard–Yubero model and the results were compared with the envelope of the transmission spectra obtained using a UV-spectrometer. The dispersion behavior of the refractive index from REELS results was studied in terms of the single-oscillator Wemple–DiDomenico model. The results showed that the different compositions of In/Zn/Sn caused a change in the dispersion parameters of IZTO thin films in contrast to the static values of refractive indices and dielectric constant which remained the same. Our work demonstrated that REELS is an efficient tool to study the optical properties of a material by obtaining the optical parameters.

36 MATERIALS SCIENCE↗

A two-in-one superhydrophobic and anti-reflective nanodevice in the grey cicada Cicada orni (Hemiptera)

Two separated levels of functionality are identified in the nanostructure which covers the wings of the grey cicada Cicada orni (Hemiptera). The upper level is responsible for superhydrophobic character of the wing, while the lower level enhances its anti-reflective behavior. Extensive wetting experiments with various chemical species and optical measurements were performed in order to assess the bi-functionality. Scanning electron microscopy imaging was used to identify the nanostructure morphology. Numerical optical simulations and analytical wetting models were used to prove the roles of both levels of the nanostructure. In addition, the complex refractive index of the chitinous material of the wing was determined from measurements.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of thermal annealing on structural and optical properties of In{sub 2}S{sub 3} thin films

There is a highly need of an alternate of toxic materials CdS for solar cell applications and indium sulfide is found the most suitable candidate to replace CdS due to its non-toxic and environmental friendly nature. In this paper, the effect of thermal annealing on the structural and optical properties of indium sulfide (In{sub 2}S{sub 3}) thin films is undertaken. The indium sulfide thin films of 121 nm were deposited on glass substrates employing thermal evaporation method. The films were subjected to the X-ray diffractometer and UV-Vis spectrophotometer respectively for structural and optical analysis. The XRD pattern show that the as-deposited thin film was amorphous in nature and crystallinity is found to be varied with annealing temperature. The optical analysis reveals that the optical band gap is varied with annealing. The optical parameters like absorption coefficient, extinction coefficient and refractive index were calculated. The results are in good agreement with available literature.

36 MATERIALS SCIENCE↗

Collective neutrino oscillations in matter and CP violation

We explore CP violation effects on the neutrino propagation in dense environments, such as in core-collapse supernovae, where the neutrino self-interaction induces nonlinear evolution equations. We demonstrate that the electron (anti)neutrino fluxes are not sensitive to the CP violating phase if the muon and tau neutrinos interact similarly with matter. On the other hand, we numerically show that new features arise, because of the nonlinearity and the flux dependence of the evolution equations, when the muon and tau neutrinos have different fluxes at the neutrinosphere (due to loop corrections or physics beyond the standard model). In particular, the electron (anti)neutrino probabilities and fluxes depend upon the CP violating phase. We also discuss the CP effects induced by radiative corrections to the neutrino refractive index.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of infrared refractive indices of organic and organophosphorous compounds for optical modeling

The complex optical refractive index contains the optical constants, n($\tilde{u}$)and k($\tilde{u}$), which correspond to the dispersion and absorption of light within a medium, respectively. By obtaining the optical constants one can in principle model most optical phenomena in media and at interfaces including reflection, refraction and dispersion. We have developed improved protocols based on the use of multiple path lengths to determine the optical constants for dozens of liquids, including organic and organophosphorous compounds. Detailed description of the protocols to determine the infrared indices will be presented, along with preliminary results using the constants with their applications to optical modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Accuracy Wavelength Calibration For A Scanning Visible Spectrometer

Spectroscopic applications for plasma velocity measurements often require wavelength accuracies ≤ 0.2Â. An automated calibration for a scanning spectrometer has been developed to achieve a high wavelength accuracy overr the visible spectrum, stable over time and environmental conditions, without the need to recalibrate after each grating movement. The method fits all relevant spectrometer paraameters using multiple calibration spectra. With a steping-motor controlled sine-drive, accuracies of ~0.025 Â have been demonstrated. With the addition of high resolution (0.075 aresec) optical encoder on the grading stage, greater precision (~0.005 Â) is possible, allowing absolute velocity measurements with ~0.3 km/s. This level of precision requires monitoring of atmospheric temperature and pressure and of grating bulk temperature to correct for changes in the refractive index of air and the groove density, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Improvement of the performance parameters of the surface plasmon resonance biosensor using Al{sub 2}O{sub 3} and WS{sub 2}

Here, proposed Kretschmann configuration based surface plasmon resonance biosensor shows immense improvement in its performance parameters. This highly sensitive biosensor provides a higher value of quality factor and detection accuracy. We presented a five-layer model of a biosensor with two dimensional transition metal di-chalcogenides Tungsten disulfide (WS2) in addition with Al2O3 layer. By using one layer of WS2 with six layers of Al2O3, the highest sensitivity (227.5 °/RIU), detection accuracy (1.1123), and quality factor (28.26 RIU{sup −1}) can be achieved. CaF2 as coupling prism has also played a remarkable role in enhancing the performance parameters for its low refractive index.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗