Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polymer behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Mechanical and physical properties of inorganic polymer cement made of iron-rich laterite and lateritic clay: A comparative study

In this work, two different laterites (iron contents of 13.07 and 49.34 wt%, respectively, for lateritic clay, LAC, and iron-rich laterite, LAI) were selected and calcined at 600 °C. The obtained calcined laterites, namely LAI600 and LAC600, were separately mixed with an alkaline solution (silicate modulus of 1.35) or an acidic solution (phosphoric acid solution at pH ≤ 2) for the synthesis of inorganic polymer products. The fabricated products were cured at 20 °C (ambient) and 40 °C (oven). The obtained results showed that the compressive strength of each series of alkaline-based inorganic polymer binder increased with ageing time (7 and 28 days) for room temperature curing, while the reverse trend was noted for oven-cured specimens. The best mechanical performance was obtained when using a phosphoric acid solution, 38 and 52 ± 1 MPa; 62 and 65 ± 1 MPa at 28 days for LAC and LAI respectively. It appeared that a higher iron content within the laterite contributed to an increase in the compressive strength under acidic conditions (LAI (59 MPa) > LAC (48 MPa)) compared to the behavior obtained under alkaline conditions (LAI (6 MPa) < LAC (29 MPa)). Accordingly, the acidic products exhibited a dense structure (with lower porosity) and contained amorphous iron/aluminium phosphate phases such as berlinite (FePO{sub 4}), iron hydrogen phosphate hydrate (Fe{sub 3}H{sub 15}(PO{sub 4}){sub 8·}4H{sub 2}O), ferrowyllieite (AlFe{sub 2}Na{sub 2}(PO{sub 4}){sub 3}) and sodium iron phosphate (Na{sub 3}Fe{sub 2}(PO{sub 4}){sub 3}) arising from the alteration of iron minerals in an acidic medium, confirmed by Mössbauer spectroscopy and electron paramagnetic resonance spectroscopy.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Confined Crystal Melting in Edgeless Poly( L -lactic acid) Crystalsomes

Polymer single crystals tend to be quasi two-dimensional (2D) lamellae and their small lateral surfaces are the starting points of lamella melting and thickening. However, the recently discovered crystalsomes, which are defined for hollow single crystal-like spherical shells, are edgeless, self-confined, and incommensurate with translational symmetry. Here, this work concerns the structure and melting behavior of these edgeless crystalsomes. Poly(l-lactic acid) crystalsomes were grown using a miniemulsion solution crystallization method. Differential scanning calorimetry and in situ wide-angle X-ray diffraction were used to follow the structural evolution of the crystalsomes upon heating. Our results demonstrated that the structure and melting behavior of crystalsomes are curvature-dependent and significantly different from their flat crystal counterpart.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Uranium recovery from seawater using amidoxime-based braided polymers synthesized from acrylic fibers

Global demand for nuclear energy is expected to rise in the coming decades. To meet these growing needs, new uranium resources must be explored. One of the potential alternatives to traditional uranium mining is oceanic uranium. The capture and recovery of uranium from the ocean has been under investigation for some time, with many recent studies focused on amidoxime based adsorbents. These adsorbents while able to achieve high uranium recovery capacities are, nevertheless, expensive to produce and adsorb a significant amount of hard to remove vanadium. The purpose of this study is to evaluate the adsorption performance of amidoxime based polymer braids synthesized from acrylic fibers which are designed to significantly cut polymer synthesis and conditioning costs. Adsorption experiments were performed in a recirculating raceway flume system at environmental conditions, approximately 10.8 oC, with 40-micron prefiltered seawater over 28 days for small and large sized LCW polymer braids. For both braid sizes, the adsorption of vanadium was far lower on the LCW materials than on Oak Ridge National Laboratory’s amidoxime based AF1 and AI8 small braids, with the LCW small braids outperforming both materials with respect to uranium adsorption under similar conditions. Adsorption modeling was used to simulate the performance at higher temperatures based on 20oC experiments previously performed with similar materials. Simulation results indicated that the small LCW braids would have a less significant advantage with respect to uranium adsorption over both AF1 and AI8 at 20oC and adsorb slightly less uranium than AF1 at 31oC. Vanadium adsorption by LCW small braids was less than one third of vanadium adsorption by either AF1 or AI8 for all temperatures. This behavior indicates that the LCW materials are able to achieve comparable uranium adsorption to other amidoxime adsorbents previously developed, while being cheaper to produce and adsorbing significantly less vanadium.

Wiechert, Alexander I.↗
DOE OSTI2022

Strongly Chiral Liquid Crystals in Nanoemulsions

We report Liquid crystal (LC) emulsions represent a class of confined soft matter that exhibit exotic internal organizations and size-dependent properties, including responses to chemical and physical stimuli. Past studies have explored micrometer-scale LC emulsion droplets but little is known about LC ordering within submicrometer-sized droplets. This paper reports experiments and simulations that unmask the consequences of confinement in nanoemulsions on strongly chiral LCs that form bulk cholesteric and blue phases (BPs). A method based on light scattering is developed to characterize phase transitions of LCs within the nanodroplets. For droplets with a radius to the pitch ratio (R v /p 0 ) as small as 2/3, the BP-to-cholesteric transition is substantially suppressed, leading to a threefold increase of the BP temperature interval relative to bulk behavior. Complementary simulations align with experimental findings and reveal the dominant role of chiral elastic energy. For R v /p 0 ≈ to 1/3, a single LC phase forms below the clearing point, with simulations revealing the new configuration to contain a τ -1/2 disclination that extends across the nanodroplet. These findings are discussed in the context of mechanisms by which polymer networks stabilize BPs and, more broadly, for the design of nanoconfined soft matter.

42 ENGINEERING↗
DOE OSTI2020

Shock initiation and hot spots in plastic-bonded 1,3,5-triamino-2,4,6-trinitrobenzene (TATB)

TATB (1,3,5-triamino-2,4,6-trinitrobenzene) is a powerful explosive whose dynamical behavior is difficult to study because TATB is so insensitive to initiation by shock waves. We used a tabletop microscope equipped with 0–4.5 km/s laser-launched flyer plates to study shock initiation of TATB, which was fabricated in the form of an array of hundreds of plastic-bonded explosive minicharges (X-TATB = 80% TATB + 20% Sylgard 182 polymer). The 4 ns shocks from the flyer plates were not effective in initiating TATB, but we also developed a two-layer array where flyers first initiated a plastic-bonded PETN (pentaerythritol tetranitrate) charge (X-PETN = 80% PETN + 20% Sylgard), which drove an initiating 25 ns shock into the X-TATB. Thermal emission from shocked X-TATB was used to measure time-dependent temperature profiles with a resolution of 2 ns and to produce high-speed (5 ns) videos. In X-TATB, flyer plates produced 2500–3500 K hot spots and combustion at 2500 K. With X-PETN initiators, X-TATB had 3500–4000 K hot spots and a powerful volume explosion lasting a few nanoseconds. Prospects for producing TATB detonations on a tabletop are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Understanding the origin of softness in structurally tailored and engineered macromolecular (STEM) gels: A DPD study

Structurally tailored and engineered macromolecular (STEM) gels are polymer networks containing a primary network (the “STEM-0” gel) and side chains that are anchored to this network (forming the “STEM-1” gel). The ability to vary the features of the side chains provides a robust means of tailoring the macroscopic properties of the material. We use dissipative particle dynamics (DPD) simulations to determine the mechanical response of STEM-1 gels to uniaxial compression for various values of the side chain length, n sc . While the Young’s modulus of the material is significantly decreased with increasing n sc (at a fixed density of grafted side chains), above a certain saturation value, increasing n sc does not lead to any further softening of the sample. Using the simulations, we calculate the relevant stresses, which are related to the Young’s modulus and the number of entanglements in the network. We show that the backbone chains become more spread out upon addition of sidechains, leading to a decrease in the physical entanglements between backbone segments. This observation accounts for the decrease of stress in the backbone network and the softening of the networks through the addition of sidechains. For long chains, however, the number density of physical crosslinks between side chains is independent of side chain length; this observation explains the observed stress saturation in the STEM-1 gels. Our approach allows us to correlate the molecular architecture of the gels to the resultant macroscopic mechanical behavior and provide guidelines for fabricating STEM gels with well-defined mechanical properties, which allow the materials to be used for a variety of applications.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Soft elasticity optimises dissipation in 3D-printed liquid crystal elastomers

Soft-elasticity in monodomain liquid crystal elastomers (LCEs) is promising for impact-absorbing applications where strain energy is ideally absorbed at constant stress. Conventionally, compressive and impact studies on LCEs have not been performed given the notorious difficulty synthesizing sufficiently large monodomain devices. Here, we use direct-ink writing 3D printing to fabricate bulk (>cm 3 ) monodomain LCE devices and study their compressive soft-elasticity over 8 decades of strain rate. At quasi-static rates, the monodomain soft-elastic LCE dissipated 45% of strain energy while comparator materials dissipated less than 20%. At strain rates up to 3000 s –1 , our soft-elastic monodomain LCE consistently performed closest to an ideal-impact absorber. Drop testing reveals soft-elasticity as a likely mechanism for effectively reducing the severity of impacts – with soft elastic LCEs offering a Gadd Severity Index 40% lower than a comparable isotropic elastomer. Lastly, we demonstrate tailoring deformation and buckling behavior in monodomain LCEs via the printed director orientation.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Pure- and mixed-gas transport properties of a microporous Tröger's Base polymer (PIM-EA-TB)

Polymers of intrinsic microporosity (PIMs) offer tantalizing combinations of high selectivity and permeability in initial gas permeation measurements. Here, we report characterization of pure- and mixed-gas permeation properties of a thick (~80 μm) PIM consisting of Tröger's Base (TB) and Ethanoanthracene (EA) films. The effects of feed pressure and temperature on pure-gas permeabilities of CH 4 , N 2 , O 2 , H 2 , and CO 2 were investigated. The physical aging behavior of the thick film was tracked via pure-gas O 2 , N 2 , and CH 4 permeability at 35 °C. Gas permeability decreased noticeably and selectivity increased as aging time increased. Particular attention was given to mixed-gas measurements of CO 2 and CH 4 (50/50) permeabilities at 35 °C and fugacities ranging from 2 to 18 atm to explore whether the rigid, bridged, bicyclic TB and EA units could resist CO 2 -induced plasticization. These results are presented along with pure-gas CO 2 and CH 4 results for membrane samples aged at different times. PIM-EA-TB aged for ~24 h did not show signs of plasticization across the fugacity range considered. Furthermore, dual-mode competitive sorption presumably caused the CO 2 /CH 4 mixed-gas selectivity to be slightly higher than its corresponding pure-gas selectivity. However, as aging time increased, aged films underwent progressively more rapid and extensive CO 2 -induced plasticization with increasing fugacity, suggesting a systematic relationship between physical aging and plasticization in PIMs. Consequently, physical aging caused less improvement in mixed-gas CO 2 /CH 4 selectivity than it did in pure-gas selectivity, due mainly to plasticization effects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Non-covalent planarizing interactions yield highly ordered and thermotropic liquid crystalline conjugated polymers

Controlling the multi-level assembly and morphological properties of conjugated polymers through structural manipulation has contributed significantly to the advancement of organic electronics. In this work, a redox active conjugated polymer, TPT–TT, composed of alternating 1,4-(2-thienyl)-2,5-dialkoxyphenylene (TPT) and thienothiophene (TT) units is reported with non-covalent intramolecular S⋯O and S⋯H–C interactions that induce controlled main-chain planarity and solid-state order. As confirmed by density functional theory (DFT) calculations, these intramolecular interactions influence the main chain conformation, promoting backbone planarization, while still allowing dihedral rotations at higher kinetic energies (higher temperature), and give rise to temperature-dependent aggregation properties. Thermotropic liquid crystalline (LC) behavior is confirmed by cross-polarized optical microscopy (CPOM) and closely correlated with multiple thermal transitions observed by differential scanning calorimetry (DSC). This LC behavior allows us to develop and utilize a thermal annealing treatment that results in thin films with notable long-range order, as shown by grazing-incidence X-ray diffraction (GIXD). Specifically, we identified a first LC phase, ranging from 218 °C to 107 °C, as a nematic phase featuring preferential face-on π–π stacking and edge-on lamellar stacking exhibiting a large extent of disorder and broad orientation distribution. A second LC phase is observed from 107 °C to 48 °C, as a smectic A phase featuring sharp, highly ordered out-of-plane lamellar stacking features and sharp tilted backbone stacking peaks, while the structure of a third LC phase with a transition at 48 °C remains unclear, but resembles that of the solid state at ambient temperature. Furthermore, the significance of thermal annealing is evident in the ∼3-fold enhancement of the electrical conductivity of ferric tosylate-doped annealed films reaching 55 S cm −1 . More importantly, thermally annealed TPT–TT films exhibit both a narrow distribution of charge-carrier mobilities (1.4 ± 0.1) × 10 −2 cm 2 V −1 s −1 along with a remarkable device yield of 100% in an organic field-effect transistor (OFET) configuration. This molecular design approach to obtain highly ordered conjugated polymers in the solid state affords a deeper understanding of how intramolecular interactions and repeat-unit symmetry impact liquid crystallinity, solution aggregation, solution to solid-state transformation, solid-state morphology, and ultimately device applications.

Chemistry↗
DOE OSTI2022

Characteristics and radiolysis behavior of polyvinylchloride under accelerated proton and γ-irradiation

Here the effect of high energy protons and γ-irradiation on the structural properties, surface-energies, and toxicological properties of polyvinyl chloride (PVC) were studied due to the role PVC products play in many technologies including the nuclear industry. Accelerated 1–4 MeV protons impacting on PVC in vacuum lead to the formation of polyenyl radicals as shown by EPR and to an increase in free surface energy due to functionalization of the surface of the irradiated polymer. γ-irradiation leads to the formation of unsaturated bonds, carbonyl and hydroxyl groups as shown by IR and to the release of HCl. Correlated molecular orbital theory calculations of reaction thermodynamics were used to aid in the development of a mechanism in the absence of oxygen. The formation and accumulation of chromophores and auxochromic groups during γ-radiolysis of PVC leads to a gradual change of the initial white color of the polymer to yellow and then to brown and black with high sensitivity. A mixture of powdered PVC and silicate glue was used to determine the profile of a 60 Co γ-radiation beam on targets with a complex relief. γ-irradiated polymer does not have a local irritating effect due to a single application to the skin of mice in an adhesive mixture at a concentration of up to 5000 mg/kg. γ-radiolysis of PVC powder in air with a dose of up to 1400 kGy does not affect its acute toxicity when administered intragastrically to BDF1 mice. PVC and its γ-irradiated analogs are non-toxic at doses ≤5000 mg/kg.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2022

PemNet: A Transfer Learning-Based Modeling Approach of High-Temperature Polymer Electrolyte Membrane Electrochemical Systems

Widespread adoption of high-temperature electrochemical systems such as polymer electrolyte membrane fuel cells (HT-PEMFCs) requires models and computational tools for accurate optimization and guiding new materials for enhancing fuel cell performance and durability. Furthermore, while robust and better suited for extrapolation, knowledge-based modeling has limitations as it is time-consuming and requires information about the system that is not always available (e.g., material properties and interfacial behavior between different materials). Data-driven modeling, on the other hand, is easier to implement but often necessitates large datasets that could be difficult to obtain. In this contribution, knowledge-based modeling and data-driven modeling are combined by implementing a few-shot learning (FSL) approach. A knowledge-based model originally developed for a HT-PEMFCs was used to generate simulated data (887,735 points) and used to pretrain a neural network source model tuned via a genetic algorithm-based AutoML. Then, experimental datasets from HT-PEMFCs with different materials and operating conditions (~50 points each) were used to train six target models via FSL. Models for the unseen data reached high accuracies in all cases (rRMSE < 10%).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Nanoscale cooperative adsorption for materials control

Abstract Adsorption plays vital roles in many processes including catalysis, sensing, and nanomaterials design. However, quantifying molecular adsorption, especially at the nanoscale, is challenging, hindering the exploration of its utilization on nanomaterials that possess heterogeneity across different length scales. Here we map the adsorption of nonfluorescent small molecule/ion and polymer ligands on gold nanoparticles of various morphologies in situ under ambient solution conditions, in which these ligands are critical for the particles’ physiochemical properties. We differentiate at nanometer resolution their adsorption affinities among different sites on the same nanoparticle and uncover positive/negative adsorption cooperativity, both essential for understanding adsorbate-surface interactions. Considering the surface density of adsorbed ligands, we further discover crossover behaviors of ligand adsorption between different particle facets, leading to a strategy and its implementation in facet-controlled synthesis of colloidal metal nanoparticles by merely tuning the concentration of a single ligand.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Hierarchal structures tuned electrocaloric and electromechanical performance in PVDF-based tetrapolymers

Ferroelectrics with multifunctionalities are gaining increased interest in self-actuated electrocaloric effect (ECE) refrigerators. However, achieving high ECE and electromechanical (EM) coupling concomitantly for maximum heat transfer remains challenging. Here we present the structure-property relationship for poly(vinylidene fluoride-co-trifluoroethylene-co-chlorofluoroethylene-co-double bond), P(VDF-TrFE-CFE-DB), tetrapolymer, which exhibited a high ECE entropy change of 66.5 J Kg −1 K −1 and EM strain of −6.1%. We show that thermal treatment can be a key factor influencing multifunctional properties. High-temperature annealing incorporates DB and CFE units into crystalline grains to form extended-chain crystals, enabling CFE units to induce relaxor behavior and DB units to induce large structural changes at low electric fields. This synergy leads to an enhancement in both ECE and EM performances. Furthermore, at an optimized temperature of 50 °C, the annealed films exhibit giant cross-energy coupling, achieving ECE and EM performances of 100.8 J Kg −1 K −1 and −7.6%. This study provides insights into developing new ferroelectric polymers with electroactive multifunctionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Counterintuitive Compatibilization of Poly(-Valerolactone) and Poly(L-Lactic Acid) by Statistical Copolymers toward Compostable and Recyclable Packaging

Poly(δ-valerolactone) (PVL) and poly(l-lactic acid) (PLLA) are bioderivable, compostable, and chemically recyclable plastics with synergistic properties for addressing plastic waste accumulation in receiving environments. Though recyclable-by-design polymers often fall short of competing with incumbent materials, blending affords a means to leverage individual component strengths toward ideal tunable properties. Polymer blends are often immiscible, but a range of methodologies are available to promote mixing. Here, we report on the compatibilization of 9 immiscible PVL and PLLA blends with three different compatibilization agents: thermoplastic starch, synthesized PVL-co-PLLA statistical copolymers (SCPs), and synthesized PVL-b-PLLA block-type copolymers. Resulting degrees of compatibilization are observed through scanning electron microscopy, corroborated by thermal and mechanical analyses monitoring performance as a function of microdomain size. Small-angle and wide-angle X-ray scattering experiments are conducted to observe the influence of compatibilizers on individual crystalline phases to further elucidate material behavior. Molecular dynamics simulations provide key insights into the interfacial interactions between homopolymers and compatibilizers. Finally, a suite of end-of-life avenues is established by biodegradation in industrial composting conditions, chemical recycling by deconstruction to hydroxymethyl esters, and direct chemical depolymerization to lactone precursors in mixed feed. Overall, we highlight several promising blends and the counterintuitive SCP compatibilization phenomenon toward high-performance, sustainable materials.

Compatibilization, copolymer compatibilizer, bio-b↗
DOE OSTI2025

Sub‐5 Ångstrom Porosity Tuning in Calixarene‐Derived Porous Liquids via Supramolecular Complexation Construction

Abstract Sub‐Ångstrom‐level porosity engineering, which is appealing in gas separations, has been demonstrated in solid carbon, polymer, and framework materials but rarely achieved in the liquid phase. In this work, a gas molecular sieving effect in the liquid phase at sub‐5 Ångstrom scale is created via sophisticated porosity tuning in calixarene‐derived porous liquids (PLs). Type II PLs are constructed via supramolecular complexation between the sodium salts of calixarene derivatives and crown ether solvents. The chemical structure variation and assembly behavior of the porous host upon PL construction are monitored by spectroscopy‐, X‐ray‐, and neutron‐scattering techniques. The presence of permanent porosity in calixarene‐derived PLs is verified by pressure swing gas uptake, altered CO 2 physisorption behavior, and molecular simulations. Sub‐5 Ångstrom porosity tuning within the PL phase is achieved by introducing bulky substituted groups on the benzene ring of the calixarene host, which then greatly affects the dynamic motion and transport behavior of CO 2 molecules and the Xe uptake performance. The approach being demonstrated in this work represents a promising pathway to tune and leverage the porosity effect for enhanced gas uptake capacity and selectivity in liquid sorbents.

Li, Errui [Department of Chemistry University of T↗
DOE OSTI2021

Crystalline Supramolecular Polymers: Dynamics, Chirality, and Function

Inspired by biological systems, supramolecular polymers have emerged over the past three decades as an important way to form functional structures with potential to tune the internal order and dynamics and to create materials with the potential for responsiveness, reconfigurability, and recyclability. We focus here on several recent examples of ordered supramolecular polymers with a significant extent of internal order that results in crystalline molecular packing, or with dynamics that allow them to undergo structural reconfiguration. These examples highlight the spectrum of molecular mobility that the noncovalently bound constituents can experience. Furthermore, these materials have found interesting functions in their interaction with chiral biological systems and in their ability to form materials with interesting optoelectronic and photocatalytic behavior.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗