Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plasma fluctuations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS2001

Investigation of the Polytropic Relationship Between Density and Temperature Within Interplanetary Coronal Mass Ejections Using Numerical Simulations

Single-point spacecraft measurements within coronal mass ejections (CMEs) often exhibit a negative correlation between electron density and temperature. At least two opposing interpretations have been suggested for this relationship. If, on one hand, these single spacecraft observations provide direct measures of the polytropic properties of the plasma, then they imply that the polytropic index for the electrons gamma(sub e) is often < 1. Moreover, since the electrons carry the bulk of the pressure (via their significantly higher temperature), this further implies that the dynamics of CME evolution are dominated by an effective polytropic index gamma(sub e)ff < 1. On the other hand, gamma < 1 implies that as the ejecta propagate away from the Sun and expand, they also heat up; a result clearly at odds with in situ observations. In contrast to these CME intervals, many studies have shown that the quiescent solar wind exhibits a positive correlation between electron density and temperature, suggesting that gamma(sub e) > 1. In this study we simulate the evolution of a variety of CME-like disturbances in the solar wind using a one-dimensional, single-fluid model, to address the interpretation of the relationship between electron density and temperature within CMEs at fixed locations in space. Although we strictly impose a polytropic relationship (with gamma = constant) throughout our simulations, we demonstrate that a variety of correlations can exist between density and temperature at fixed points. Furthermore, we demonstrate that the presence of only local uncorrelated random fluctuations in density and temperature can produce a negative correlation. Consequently, we conclude that these single-point observations of negative correlations between electron density and temperature cannot be used to infer the value of gamma(sub e). Instead, we suggest that entropy variations, together with the plasma's tendency to achieve pressure balance with its surroundings, are responsible for the observed profiles.

Riley, Pete↗
DOE OSTI2023

Radiative cooling effects on reverse shocks formed by magnetized supersonic plasma flows

We study the structure of reverse shocks formed by the collision of supersonic, magnetized plasma flows driven by an inverse (or exploding) wire array with a planar conducting obstacle. We observe that the structure of these reverse shocks varies dramatically with wire material, despite the similar upstream flow velocities and mass densities. For aluminum wire arrays, the shock is sharp and well-defined, consistent with magneto-hydrodynamic theory. In contrast, we do not observe a well-defined shock using tungsten wires, and instead we see a broad region dominated by density fluctuations on a wide range of spatial scales. We diagnose these two very different interactions using interferometry, Thomson scattering, shadowgraphy, and a newly developed imaging refractometer that is sensitive to small deflections of the probing laser corresponding to small-scale density perturbations. We conclude that the differences in shock structure are most likely due to radiative cooling instabilities, which create small-scale density perturbations elongated along magnetic field lines in the tungsten plasma. These instabilities grow more slowly and are smoothed by thermal conduction in the aluminum plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

The physics basis to integrate an MHD stable, high-power hybrid scenario to a cool divertor for steady-state reactor operation

Abstract Coupling a high-performance core to a low heat flux divertor is a crucial step for ITER and a Fusion Pilot Plant or DEMO. Experiments in DIII-D recently expanded the steady-state hybrid scenario to high density and divertor impurity injection to study the feasibility of a radiating mantle solution. This work presents the physics basis for trade-offs between density, current drive and stability to tearing modes (TMs) at high β. EC power is crucial to tailor the plasma profiles into a passively stable state, and to eject impurities from the core. Off-axis EC depositions decrease the heating efficiency, but calculated electron heat transport coefficients show that this effect is partially mitigated by improved confinement inside the EC deposition. Additionally, the reduction in pressure is recovered by increasing the density. This favourable scaling of confinement with density was observed in high power plasmas for years, and this work provides a comprehensive explanation. ELITE predictions indicate that a path in peeling-ballooning stability opens up for certain conditions of density, power, q 95 and shaping, allowing the edge pressure to continue increasing without encountering a limit. In the core, calculated anomalous fast-ion diffusion coefficients are consistent with density fluctuation measurements in the toroidicity-induced Alfvén eigenmode range, showing that smaller fast-ion losses contribute to the enhanced confinement at high density. The edge integration study shows that divertor heat loads can be reduced with Ne and Ar injection, but this eventually triggers a cascade of n = 1, 2, 3 core TMs. We can now show that impurity radiation in the core is small and it is not the cause for the drop in confinement at high Ar and Ne injection rates. The overlap between the core TMs is consistent with the loss of pressure as estimated by the Belt model for the coupled rational surfaces. Optimization of these trade-offs has achieved plasmas with sustained H 98y2 = 1.7, f GW = 0.7 and ∼85% mantle radiation. The scenario and its variations at higher density and on- vs off-axis EC heating has been studied as a candidate for an integrated solution for several reactor designs, such as ITER, ARC, and the ARIES-ACT1 case, showing promising results in terms of fusion power and gain.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Interpretations of ground-state symmetry breaking and strong correlation in wavefunction and density functional theories

Significance The ground state of a quantum mechanical system is the lowest-energy eigenstate of the Hamiltonian. In isolation, it persists unchanged forever, with symmetries dictated by those of the Hamiltonian. But near-eigenstates of broken symmetry can persist for long times, even on the scale of human measurement. The appearance of broken symmetries of the electron density or spin density in a density functional calculation can reveal strong correlations among the electrons that are present in a symmetry-unbroken wavefunction. Symmetry breaking can arise when a wave-like fluctuation drops to zero frequency. The presented examples are the stretched hydrogen molecule, antiferromagnetism in solids, and the static charge-density wave in a low-density jellium, which is shown quantitatively to be a zero-frequency plasma wave.

42 ENGINEERING↗
NASA NTRS1980

Dust in Jupiter's magnetosphere. I - Physical processes. II - Origin of the ring. III - Time variations. IV - Effect on magnetospheric electrons and ions

The physical processes acting on charged microscopic dust grains in the Jovian atmosphere involve electromagnetic forces which dominate dust particle dynamics and diffusion across field lines resulting from random charge fluctuations of the dust grains. A model of the Jovian ring hypothesizes that the 'visible' ring particles are produced by erosive collisions between an assumed population of kilometer-sized parent bodies and submicron-sized magnetospheric dust particles. Fluctuations in the ring topology and intensity are determined over various time scales, showing that the ring is a quasipermanent and quasistable characteristic of the Jovian system. Finally, the interaction of the Jovian energetic belt electrons and the Jovian plasma with an ambient dust population is examined; the distribution of dust ejected from Io in the inner magnetosphere and losses of magnetospheric ions and electrons due to direct collisions with charged dust particles are calculated.

Morfill, G. E.↗
NASA NTRS1983

Nonlinear energy flow in a beam-plasma system

The three-dimensional character of the beam-plasma instability is investigated. The true beam-electron distribution function is resolved with a novel directional energy analyzer. The electron plasma waves are observed to develop a large spread in perpendicular wave numbers and damp in a relatively short distance producing an energetic electron tail on the background distribution. The damping is believed to be due to strong ion fluctuations which produce an anomalous resistivity.

Whelan, D. A.↗
NASA NTRS1992

Characterization of electric thruster plumes using multiplexed laser induced fluorescence measurements

The use of laser-induced fluorescence to obtain spatially resolved measurements of propellant velocities and temperatures in electric thruster plumes is discussed, with emphasis on two innovations of the technique, namely simultaneous recording of the optogalvanic signal in a hollow cathode lamp for the purpose of calibrating Doppler shifts, and two-beam multiplexing to allow the measurement of two velocity components at once. It is also shown how information on plume fluctuations can be obtained from the multiplxed LIF data. The techniques are demonstrated on the plume from a low power arcjet, operated on argon, and its extension to the measurement of ion velocities in electrostatic ion thrusters and stationary plasma thrusters is discussed.

Ruyten, W. M.↗
DOE OSTI2022

Testing the conservative character of particle simulations: I. Canonical and noncanonical guiding center model in Boozer coordinates

The guiding center (GC) Lagrangian in Boozer coordinates for toroidally confined plasmas can be cast into canonical form by eliminating terms containing the covariant component B Ψ P of the magnetic field vector with respect to the poloidal flux function Ψ P . In an unperturbed plasma, B Ψ P can be eliminated via exact coordinate transformations, but, in general, one relies on approximations, assuming that the effect of B Ψ P is small. In this work, we are interested in the question whether Hamiltonian conservation laws are still satisfied when B Ψ P is retained in the presence of fluctuations. Considering fast ions in the presence of a shear Alfvén wave field with fixed amplitude, fixed frequency, and a single toroidal mode number n, we show that simulations using the code ORBIT with and without B Ψ P yield practically the same resonant and nonresonant GC orbits. The numerical results are consistent with theoretical analyses (presented in the appendix), which show that the unabridged GC Lagrangian with B Ψ P retained yields equations of motion that possess two key properties of Hamiltonian flows: (i) phase space conservation and (ii) energy conservation. As counter-examples, we also show cases where energy conservation (ii) or both conservation laws (i) and (ii) are broken by omitting certain small terms. When testing the conservative character of the simulation code, it is found to be beneficial to apply perturbations that do not resemble normal (eigen) modes of the plasma. The deviations are enhanced and, thus, more easily spotted when one inspects wave-particle interactions using nonnormal modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Microphysically modified magnetosonic modes in collisionless, high-β plasmas

With the support of hybrid-kinetic simulations and analytic theory, we describe the nonlinear behaviour of long-wavelength non-propagating (NP) modes and fast magnetosonic waves in high-β collisionless plasmas, with particular attention to their excitation of and reaction to kinetic micro-instabilities. The perpendicularly pressure balanced polarization of NP modes produces an excess of perpendicular pressure over parallel pressure in regions where the plasma β is increased. For mode amplitudes |δB/B 0 |≳0.3, this excess excites the mirror instability. Particle scattering off these micro-scale mirrors frustrates the nonlinear saturation of transit-time damping, ensuring that large-amplitude NP modes continue their decay to small amplitudes. At asymptotically large wavelengths, we predict that the mirror-induced scattering will be large enough to interrupt transit-time damping entirely, isotropizing the pressure perturbations and morphing the collisionless NP mode into the magnetohydrodynamic (MHD) entropy mode. In fast waves, a fluctuating pressure anisotropy drives both mirror and firehose instabilities when the wave amplitude satisfies |δB/B 0 |≳2β -1 . The induced particle scattering leads to delayed shock formation and MHD-like wave dynamics. Taken alongside prior work on self-interrupting Alfvén waves and self-sustaining ion-acoustic waves, our results establish a foundation for new theories of electromagnetic turbulence in low-collisionality, high-β plasmas such as the intracluster medium, radiatively inefficient accretion flows and the near-Earth solar wind.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2014

Thrust Measurement of Dielectric Barrier Discharge (DBD) Plasma Actuators: New Anti-Thrust Hypothesis, Frequency Sweeps Methodology, Humidity and Enclosure Effects

We discuss thrust measurements of Dielectric Barrier Discharge (DBD) plasma actuators devices used for aerodynamic active flow control. After a review of our experience with conventional thrust measurement and significant non-repeatability of the results, we devised a suspended actuator test setup, and now present a methodology of thrust measurements with decreased uncertainty. The methodology consists of frequency scans at constant voltages. The procedure consists of increasing the frequency in a step-wise fashion from several Hz to the maximum frequency of several kHz, followed by frequency decrease back down to the start frequency of several Hz. This sequence is performed first at the highest voltage of interest, then repeated at lower voltages. The data in the descending frequency direction is more consistent and selected for reporting. Sample results show strong dependence of thrust on humidity which also affects the consistency and fluctuations of the measurements. We also observed negative values of thrust, or "anti-thrust", at low frequencies between 4 Hz and up to 64 Hz. The anti-thrust is proportional to the mean-squared voltage and is frequency independent. Departures from the parabolic anti-thrust curve are correlated with appearance of visible plasma discharges. We propose the anti-thrust hypothesis. It states that the measured thrust is a sum of plasma thrust and anti-thrust, and assumes that the anti-thrust exists at all frequencies and voltages. The anti-thrust depends on actuator geometry and materials and on the test installation. It enables the separation of the plasma thrust from the measured total thrust. This approach enables more meaningful comparisons between actuators at different installations and laboratories. The dependence on test installation was validated by surrounding the actuator with a grounded large-diameter metal sleeve. Strong dependence on humidity is also shown; the thrust significantly increased with decreasing humidity, e.g., 44 percent increase as relative humidity changed from 18 percent and dew point 33 degF to 50 percent and dew point of 57 degF.

Ashpis, David E.↗
NASA NTRS2014

Dielectric Barrier Discharge (DBD) Plasma Actuators Thrust-Measurement Methodology Incorporating New Anti-Thrust Hypothesis

We discuss thrust measurements of Dielectric Barrier Discharge (DBD) plasma actuators devices used for aerodynamic active flow control. After a review of our experience with conventional thrust measurement and significant non-repeatability of the results, we devised a suspended actuator test setup, and now present a methodology of thrust measurements with decreased uncertainty. The methodology consists of frequency scans at constant voltages. The procedure consists of increasing the frequency in a step-wise fashion from several Hz to the maximum frequency of several kHz, followed by frequency decrease back down to the start frequency of several Hz. This sequence is performed first at the highest voltage of interest, then repeated at lower voltages. The data in the descending frequency direction is more consistent and selected for reporting. Sample results show strong dependence of thrust on humidity which also affects the consistency and fluctuations of the measurements. We also observed negative values of thrust or "anti-thrust", at low frequencies between 4 Hz and up to 64 Hz. The anti-thrust is proportional to the mean-squared voltage and is frequency independent. Departures from the parabolic anti-thrust curve are correlated with appearance of visible plasma discharges. We propose the anti-thrust hypothesis. It states that the measured thrust is a sum of plasma thrust and anti-thrust, and assumes that the anti-thrust exists at all frequencies and voltages. The anti-thrust depends on actuator geometry and materials and on the test installation. It enables the separation of the plasma thrust from the measured total thrust. This approach enables more meaningful comparisons between actuators at different installations and laboratories. The dependence on test installation was validated by surrounding the actuator with a large diameter, grounded, metal sleeve.

Ashpis, David E.↗
NASA NTRS2005

Dynamic Harris current sheet thickness from Cluster current density and plasma measurements

We use the first accurate measurements of current densities in the plasma sheet to calculate the half-thickness and position of the current sheet as a function of time. Our technique assumes a Harris current sheet model, which is parameterized by lobe magnetic field B(o), current sheet half-thickness h, and current sheet position z(sub o). Cluster measurements of magnetic field, current density, and plasma pressure are used to infer the three parameters as a function of time. We find that most long timescale (6-12 hours) current sheet crossings observed by Cluster cannot be described by a static Harris current sheet with a single set of parameters B(sub o), h, and z(sub o). Noting the presence of high-frequency fluctuations that appear to be superimposed on lower frequency variations, we average over running 6-min intervals and use the smoothed data to infer the parameters h(t) and z(sub o)(t), constrained by the pressure balance lobe magnetic field B(sub o)(t). Whereas this approach has been used in previous studies, the spatial gnuhen& now provided by the Cluster magnetometers were unavailable or not well constrained in earlier studies. We place the calculated hdf&cknessa in a magnetospheric context by examining the change in thickness with substorm phase for three case study events and 21 events in a superposed epoch analysis. We find that the inferred half-thickness in many cases reflects the nominal changes experienced by the plasma sheet during substorms (i.e., thinning during growth phase, thickening following substorm onset). We conclude with an analysis of the relative contribution of (Delta)B(sub z)/(Delta)X to the cross-tail current density during substorms. We find that (Delta)B(sub z)/(Delta)X can contribute a significant portion of the cross-tail c m n t around substorm onset.

Thompson, S. M.↗
NASA NTRS1982

On the nature of S II emission from Jupiter's hot plasma torus

An effective electron temperature T(e) of 80,000 K is indicated by the Voyager 1 encounter Jupiter hot torus emission rates in the 6731, 1256, 911 and reclassified 765 A transitions of S II. A set of 53 measurements of the S II red line doublet obtained at 5.9 Jupiter radii shows strong, irregular fluctuations in intensity, but no variation in the line ratio. At this distance from Jupiter, the torus is found to be longitudinally uniform in density; this is consonant with Voyager UVS findings, but contrary to magnetic anomaly model predictions. It is suggested that presently unidentified ion-ion and/or iron-atom reactions are responsible for the S II component irregular variations, in view of the fact that electron properties are regular and variable only over a small range in the hot torus at 5.9 Jupiter radii.

Brown, R. A.↗
NASA NTRS2002

Magnetic Fluctuations in the Jovian Magnetosphere

The engine that drives the jovian magnetosphere is the mass added to the Io ion torus, accelerated to corotational velocities by field-aligned currents that couple the Io torus to the jovian ionosphere. The mass of the torus builds up to an amount that the magnetic forces cannot contain and the plasma, first slowly and then more rapidly, drifts outward. Numerous authors have treated this problem based first on the observations of the Pioneer 10 and 11 flybys; then on Voyager 1 and 2, and Ulysses; and finally most recently the Galileo orbiter. The initial observations revealed the now familiar magnetodisk, in which the field above and below the magnetic equator became quite radial in orientation and much less dipolar. The Galileo observations show this transformation to occur on average at 24 R(sub J) and to often be quite abrupt. These observations are consistent with outward transport of magnetized plasma that moves ever faster radially until about 50 R(sub J) on the nightside where the field lines stretch to the breaking point, reconnection occurs, and plasma and field islands are transported down the tail ultimately removing the mass from the magnetosphere that Io had deposited deep in the inner torus. The reconnection process creates empty flux tubes connected to Jupiter that are buoyant and thought to float inward and replace the flux carried out with the torus plasma. As described above, the jovian magnetosphere could very well be in a state of steady laminar circulation, but indeed it is not. The process is very unsteady and the wave levels can be very intense. The existence of these waves in turn can lead to processes that compete with the radial circulation pattern in removing plasma from the system. These waves can scatter particles so that they precipitate into the ionosphere. This process should be important in the Io torus where the atmospheric loss cone is relatively large and becomes less important as the loss cone decreases in size with radial distance. However, the Io torus is relatively quiet compared to the region outside the torus and it is not obvious without studying this scattering carefully whether the loss in the torus or out of the torus is greater and whether it can act rapidly enough to compete with the radial transport of ions to the tail in the life cycle of the mass added at Io. Closer to Io the ion cyclotron waves are most intense and possibly are associated with the losses in the Io flux tube. The waves are also diagnostic of both the Io atmospheric composition and the size and strength of the massloading process.

Russell, Christopher T.↗
DOE OSTI2020

Design study of a combined interferometer and polarimeter for a high-field, compact tokamak

This article is the first design study of a combined interferometer and polarimeter on a compact, high-field, high-density, net-energy tokamak. Recent advances in superconducting technology have made possible designs for compact, high magnetic field fusion power plants, such as ARC [Sorbom et al., Fusion Eng. Des. 100, 378 (2015)], and experiments, such as SPARC [Greenwald et al., PSFC Report No. RR-18-2 (2018)]. These new designs create both challenges and opportunities for plasma diagnostics. The diagnostic proposed in this work, called InterPol, takes advantage of unique opportunities provided by high magnetic field and density to measure both line-averaged density and poloidal magnetic field with a single set of CO 2 and quantum cascade lasers. These measurements will be used for fast density feedback control, constraint of density and safety factor profiles, and density fluctuation measurements. Synthetic diagnostic testing using a model machine geometry, called MQ1 (Mission Q ≥ 1), and profiles simulated with Tokamak Simulation Code indicate that InterPol will be able to measure steady state density and poloidal magnetic field, as well as fluctuations caused by toroidal Alfven eigenmodes and other phenomena on a high-field compact tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Final Report for US DOE Grant DE-FG02-99ER54527

The failure of the NSTX-U coil in 2016 resulted in a redirection of UCLA’s NSTX-U research program. At that time UCLA had two functioning fluctuation reflectometer systems installed on the tokamak and was in the process of installing the new DBS/CPS system. These projects were placed on hold due to the NSTX-U recovery effort. UCLA in consultation with DOE OFES began a program of utilizing the equipment installed at NSTX-U in order to maximize the science output. In these discussion it was decided to move the V-band 50-75 GHz and the W-band 83-88 GHz multifrequency fluctuation reflectometer systems to the DIII-D tokamak. This would achieve two goals – to continue to provide important scientific input the US fusion research program and to test the new W-band system in a fusion research relevant plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1978

Transmission of Alfven waves through the earth's bow shock - Theory and observation

From both theoretical and experimental bases, the transmission of Alfven waves through the bow shock is investigated. The theory of Alfven wave transmission through fast MHD shocks is extended to all cases of incident wave vectors. Particular consideration is given to Alfven waves propagating parallel to the ambient magnetic field with field perturbations polarized in the plane formed by the ambient magnetic field and the shock normal. An analysis is also made of magnetic field and plasma data from Explorer-35 in the vicinity of the bow shock. It is suggested that hydromagnetic waves are present in all of the 14 shock crossings studied, and that in upstream regions of at least 6 crossings, predominantly Alfvenic fluctuations exist. Average amplitudes of these fluctuations are measured on either side of the shock and the enhancement is measured by comparing their levels. Theoretical and experimental findings are compared and the apparent discrepancy in amplification factors may be explained by the strong damping of any transmitted magnetoacoustic modes downstream with relatively little damping of any transmitted Alfven waves.

Hassam, A. B.↗
DOE OSTI2022

Eulerian simulations of electrostatic waves in plasmas with a single sign of charge

An Eulerian, numerical simulation is used to model the launching of plasma waves in a non-neutral plasma that is confined in a Penning–Malmberg trap. The waves are launched by applying an oscillating potential to an electrically isolated sector at one end of the conducting cylinder that bounds the confinement region and are received by another electrically isolated sector at the other end of the cylinder. The launching of both Trivelpiece–Gould waves and electron acoustic waves is investigated. Adopting a stratagem, the simulation captures essential features of the finite length plasma, while retaining the numerical advantages of a simulation employing periodic spatial boundary conditions. As a benchmark test of the simulation, the results for launched Trivelpiece–Gould waves of small amplitude are successfully compared to a linearized analytic solution for these fluctuations.

Physics↗