Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE DEPENDENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Electrical characterization of an inductively coupled gaseous electronics conference reference cell

Plasma parameters and particularly the external electrical operational parameters are examined with respect to mode transition and hysteresis. The external electrical parameters such as antenna current (I{sub c}) and antenna voltage (V{sub c}) amplitudes are measured after the matching network and discussed for an inductively coupled argon discharge. A wide range of discharge conditions by varying applied power (up to 150 W at 13.56 MHz), gas pressure (0.7-7.5 Pa), and electrostatic coupling strength are measured for a gaseous electronics conference radio frequency reference cell. The effect on the power coupling efficiency by varying electrostatic coupling strength is studied via implementing two distinct grounded Faraday shields, in addition to the original nonshielded condition. A brief discussion on the evolution of floating potential, plasma potential, electron density, and electron energy distribution function with power and pressure is also presented mainly in context to mode transitions and hysteresis. Relatively smooth transitions in the plasma parameters and in the external electrical parameters are measured close to H to E mode transition region. Contrary to plasma parameters, however, the reverse transition from E to H mode was found to be abrupt in external parameters. The plasma parameters are measured using a commercial Langmuir probe, whereas the antenna currents and voltages are measured using a homebuilt Rogowski coil and capacitor divider, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Inactivation of spores using pulsed electric field in a pressurized flow system

Pulsed electric field (PEF) inactivation is a very effective method to kill bacteria in liquid while avoiding thermal damage. However, only a limited inactivation effect on spores has been reported to date and the possible mechanisms are still unclear. Therefore, a study of inactivation of spores using PEF in a pressurized flow system is reported in this paper. PEF with a maximum magnitude higher than 110 kV/cm and a pulse width of 100 ns has been applied to a carefully designed treatment chamber through which a suspension fluid of 0.5 MPa continuously flows. Using the proposed PEF inactivation method, maximum 6.7 log reductions were achieved for B. subtilis spores that were investigated. These reductions were much greater than those obtained by a heat inactivation approach. Through frequency analysis using the frequency components of the applied pulses and the frequency response of the equivalent circuit of the spore, it was found that most voltage is applied to the outside of the core in the lower frequency and to the inside in the upper frequency. Also, transmission electron microscope micrographs of B. subtilis spores were taken in order to verify the effect of the PEF treatment.

60 APPLIED LIFE SCIENCES↗

Effect of high strain rates on peak stress in a Zr-based bulk metallic glass

The mechanical behavior of Zr{sub 41.25}Ti{sub 13.75}Cu{sub 12.5}Ni{sub 10}Be{sub 22.5} (LM-1) has been extensively characterized under quasistatic loading conditions; however, its mechanical behavior under dynamic loading conditions is currently not well understood. A Split-Hopkinson pressure bar (SHPB) and a single-stage gas gun are employed to characterize the mechanical behavior of LM-1 in the strain-rate regime of 10{sup 2}-10{sup 5}/s. The SHPB experiments are conducted with a tapered insert design to mitigate the effects of stress concentrations and preferential failure at the specimen-insert interface. The higher strain-rate plate-impact compression-and-shear experiments are conducted by impacting a thick tungsten carbide (WC) flyer plate with a sandwich sample comprising a thin bulk metallic glass specimen between two thicker WC target plates. Specimens employed in the SHPB experiments failed in the gage-section at a peak stress of approximately 1.8 GPa. Specimens in the high strain-rate plate-impact experiments exhibited a flow stress in shear of approximately 0.9 GPa, regardless of the shear strain-rate. The flow stress under the plate-impact conditions was converted to an equivalent flow stress under uniaxial compression by assuming a von Mises-like material behavior and accounting for the plane strain conditions. The results of these experiments, when compared to the previous work conducted at quasistatic loading rates, indicate that the peak stress of LM-1 is essentially strain rate independent over the strain-rate range up to 10{sup 5}/s.

36 MATERIALS SCIENCE↗

Characteristics of streamer discharge development between the dielectric-coated sphere-plane electrodes in water

This paper presents the characteristics of the streamer discharge development between the dielectric-coated sphere-plane electrodes in water. In order to study the streamer propagation mechanism, the factors such as polarities, water conductivity, and ambient pressure were taken into consideration. Experimental results demonstrate that the water conductivity and amplitude of applied voltage both have a great influence on mean velocity and brightness of the streamer. When the ambient pressure decreases from 0.1 to 0.0065 MPa, the pressure has little influence on the mean velocities of the streamer in both distilled and tap water for fast streamer. The existence of dielectric coating causes a lower initiation voltage of the streamer for negative polarity than that for positive one. Also, the 10% breakdown voltage (U{sub 10%}) is decreased by 20% under the pressure of 0.0065 MPa than that under the pressure of 0.1 MPa in distilled water, while the U{sub 10%} is almost the same under different pressures in tap water. Based on the analysis of the discharge images and current waveforms as well as the above experimental results, it can be concluded that the streamer propagation is composed of the generation of the microbubbles and the discharge in the bubbles. For subsonic streamer, the generation of the bubbles is more likely a thermal process, whereas for supersonic streamer, the ionization and dissociation of water molecules in high electric field are involved in the bubble generation process.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhanced growth of high quality single crystal diamond by microwave plasma assisted chemical vapor deposition at high gas pressures

Single crystals of diamond up to 18 mm in thickness have been grown by microwave plasma assisted chemical vapor deposition at gas pressures of up to 350 torr. Growth rates of up to 165 {mu}m/h at 300 torr at high power density have been achieved. The processes were evaluated by optical emission spectroscopy. The high-quality single-crystal diamond grown at optimized conditions was characterized by UV-visible absorption and photoluminescence spectroscopy. The measurements reveal a direct relationship between residual absorption and nitrogen content in the gas chemistry. Fabrication of high quality single-crystal diamond at higher growth rates should be possible with improved reactor design that allows still higher gas synthesis pressures.

36 MATERIALS SCIENCE↗

Mechanisms of the laser plume expansion during the ablation of LiMn{sub 2}O{sub 4}

Films of LiMn{sub 2}O{sub 4} prepared by pulsed laser ablation deposition are typically lithium deficient when grown at background pressures ranging between 10{sup -4} and 20 Pa. The deficiency of light atomic species such as lithium in LiMn{sub 2}O{sub 4} thin films occurs as a result of the different behavior of the species during plume expansion and the deposition of the film at elevated deposition temperatures. The plasma plume evolution in vacuum and 20 Pa oxygen pressure are studied using two spectroscopic techniques: emission spectroscopy and plume imaging. Higher velocities and a wider spatial distribution of lithium atoms are observed in vacuum when compared with manganese and oxygen species. Plume species are slowed down due to collisions with gas molecules when ablating LiMn{sub 2}O{sub 4} in an oxygen atmosphere. As a result, a strong deceleration of the plasma front occurs, and the effect is more pronounced for the light species, e.g., Li. Comparing the spatial manganese and lithium distribution within the plasma, the lithium species are again scattered into a wider angular range. These similar spatial distributions of Li atoms detected in the pressure range between 10{sup -4} and 20 Pa suggest that it is not possible to achieve a congruent lithium transfer to a growing film if the target contains heavier elements besides lithium. The general implications for the ablation of materials containing a combination of light and heavy elements are that as-grown films are inherently deficient with respect to the content of the light elements. If the mass ratio between the light and the heavy elements is not too different, is should be possible to find a set of deposition parameters which will result in the growth of a film with the desired composition.

36 MATERIALS SCIENCE↗

High pressure phase transformation in iron under fast compression

We present experimental results on the solid-solid, {alpha} to {epsilon} phase transformation kinetics of iron under high pressure dynamic compression. We observe kinetic features - velocity loops - similar with the ones recently reported to occur when water is frozen into its ice VII phase under comparable experimental conditions. We analyze this behavior in terms of general ideas coupling the steady sample compression with phase nucleation and growth with a pressure dependent phase interface velocity. The model is used to predict the response of iron when steadily driven across the {alpha} - {epsilon} phase boundary on very short time scales, including those envisioned to be achieved in ultra-fast laser experiments.

36 MATERIALS SCIENCE↗

An electrostatic autoresonant ion trap mass spectrometer

A new method for ion extraction from an anharmonic electrostatic trap is introduced. Anharmonicity is a common feature of electrostatic traps which can be used for small scale spatial confinement of ions, and this feature is also necessary for autoresonant ion extraction. With the aid of ion trajectory simulations, novel autoresonant trap mass spectrometers (ART-MSs) have been designed based on these very simple principles. A mass resolution {approx}60 is demonstrated for the prototypes discussed here. We report also on the pressure dependencies, and the (mV) rf field strength dependencies of the ART-MS sensitivity. Importantly the new MS designs do not require heavy magnets, tight manufacturing tolerances, introduction of buffer gases, high power rf sources, nor complicated electronics. The designs described here are very inexpensive to implement relative to other instruments, and can be easily miniaturized. Possible applications are discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Time-resolved shadowgraphic study of femtosecond laser ablation of aluminum under different ambient air pressures

Femtosecond pulse laser ablation of aluminum under different ambient air pressures between 1 atm and 4 x 10{sup -4} Pa is investigated using a femtosecond time-resolved shadowgraphic method. It is observed that as the ambient air pressure decreases, the contact front becomes more and more distinct for a certain pressure range, demonstrating that the confinement effect of the ambient air to the ablated target material can play a critically important role in the laser ablation process. It is also found that the concentric and semicircular stripe pattern, which results from the diffraction of the probe beam by the expanding plume of a specific material state and is typically observed in the shadowgraphs for 1-2 ns delay time, gradually blurs and disappears while the ambient air pressure decreases from 1 atm to 7000 Pa. If a prepulse or a relatively large pulse pedestal exists before the main pulse, however, the stripe pattern can still be observed even though the ambient air pressure is 5 x 10{sup -4} Pa. It is thus inferred that what contributes to the formation of the unique stripe pattern is a mixture of the ejected target material and ionized background gas induced by the femtosecond laser ablation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural Behaviour of Uranium Sulfide under High Pressure

The study of pressure induced structural phase transition of uranium sulphide, which crystallizes in rock salt (B1) structure, has been performed using the well described three body interaction model (TBIPM). Our present TBIP model consists of long range coulombic interaction, three body interactions, Hafemeister and Flygare type short-range overlap repulsion extended upto the second neighbor ions and the van der Waals interaction. The present results are in good agreement with the available experimental data on the phase transition pressure (Pt = 80.2 GPa). So it can be considered as an adequate and suitable model to perform high pressure studies.

36 MATERIALS SCIENCE↗

Compressibility Anomaly in Magnetic Heuslar Alloy Ni{sub 2}MnGa and Co{sub 2}FeSi

Results of synchrotron based high pressure x ray diffraction measurements on Heuslar alloys Ni{sub 2}MnGa and Co{sub 2}FeSi are reported up to 30.6 and 24.6 GPa respectively. Pressure volume data for Ni{sub 2}MnGa shows normal compressibility behaviour up to 30.6 GPa with the value of bulk modulus Bo and its pressure derivative B' as 130 GPa and 4.97 respectively. In case of Co{sub 2}FeSi, the P-V data shows normal behaviour upto 5 Gpa and hereafter linear P-V relation. The estimated ambient pressure compressibility based on data up to 5 GPa is 267 GPa (with B' = 4). The fit to linear P-V data above 5 GPa yields a compressibility of 279.5.

36 MATERIALS SCIENCE↗

High-Pressure Studies on Synthetic Orthorhombic Cubanite (CuFe{sub 2}S{sub 3})

We report here the successful synthesis of orthorhombic cubanite using microwave heating and characterization for its orthorhombic phase by powder X-ray diffraction, Micro-Raman, Thermal and high pressure electrical resistivity measurements. The unique physico-chemical conditions prevent successful synthesis under laboratory conditions, however the mineral occurs in nature in its orthorhombic form. A distinct endothermic dip in Differential Thermal Analysis (DTA) at 280 deg. C is in agreement with the DTA data reported for natural cubanite. An irreversible first order phase transformation from orthorhombic to NiAs structure is seen at 4 GPa/200 deg. C. High pressure electrical resistivity and micro-Raman spectroscopic measurements on the synthetic sample exhibit transformation to isocubanite.

36 MATERIALS SCIENCE↗

Ruby and Sm:YAG fluorescence pressure gauges up to 120 GPa and 700 K

Diamond anvil cell (DAC) technique relies on pressure determination based on use of pressure gauges. Fluorescence-based gauges, such as ruby and Sm doped yttrium aluminum garnet (Sm:YAG), are frequently used in the high pressure research. Here we present the results of DAC experiments which allowed extending calibration curves of the fluorescence frequency versus pressure up to 120 GPa at high temperatures up to 700 K for both for ruby and Sm:YAG. Cubic boron nitride was used as the reference gauge.

36 MATERIALS SCIENCE↗

Bulk Modulus of Sc2O3: Ab Initio Calculations and Experimental Results

The bulk modulus of scandia is evaluated by ab initio calculation, based on density functional theory, and compared with bulk modulus measurement on nearly fully dense scandia and with the value attained from the equation of state based on diamond anvil cell measurements. The current results are in the upper range of the bulk moduli results in the literature. The scatter in the literature results might be explained by the differences in the specific volumes of the measured and calculated cases. For the specific volume of 59.65 {+-} 0.07 {angstrom}{sup 3} the average measured isothermal bulk modulus of scandia from the present study and recent literature results is 188 {+-} 10 GPa.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compressibility and hardness of Co-based bulk metallic glass: A combined experimental and density functional theory study

An incompressible Co{sub 54}Ta{sub 11}B{sub 35} bulk metallic glass (BMG) was investigated using in situ high-pressure synchrotron diffraction and nanoindendation. The elastic constants were deduced from the experiments based on the isotropic model. The Vickers hardness was measured to be 17.1 GPa. The elastic moduli and hardness are the highest values known in BMGs. The theoretically calculated elastic properties by density-functional study were well consistent with experimental measurements. The analysis of charge density and bonding character indicates the covalent character of Co-B and B-B bonds, underlying the unusually high elastic modulus and hardness in this material.

36 MATERIALS SCIENCE↗

Br{sub 2} molecular elimination in photolysis of (COBr){sub 2} at 248 nm by using cavity ring-down absorption spectroscopy: A photodissociation channel being ignored

A primary dissociation channel of Br{sub 2} elimination is detected following a single-photon absorption of (COBr){sub 2} at 248 nm by using cavity ring-down absorption spectroscopy. The technique contains two laser beams propagating in a perpendicular configuration. The tunable laser beam along the axis of the ring-down cell probes the Br{sub 2} fragment in the B{sup 3}{Pi}{sub ou}{sup +}-X{sup 1}{Sigma}{sub g}{sup +} transition. The measurements of laser energy- and pressure-dependence and addition of a Br scavenger are further carried out to rule out the probability of Br{sub 2} contribution from a secondary reaction. By means of spectral simulation, the ratio of nascent vibrational population for v = 0, 1, and 2 levels is evaluated to be 1:(0.65 {+-} 0.09):(0.34 {+-} 0.07), corresponding to a Boltzmann vibrational temperature of 893 {+-} 31 K. The quantum yield of the ground state Br{sub 2} elimination reaction is determined to be 0.11 {+-} 0.06. With the aid of ab initio potential energy calculations, the pathway of molecular elimination is proposed on the energetic ground state (COBr){sub 2} via internal conversion. A four-center dissociation mechanism is followed synchronously or sequentially yielding three fragments of Br{sub 2}+ 2CO. The resulting Br{sub 2} is anticipated to be vibrationally hot. The measurement of a positive temperature effect supports the proposed mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure of jadeite melt at high pressures up to 4.9;#8201;GPa

The structure of jadeite (NaAlSi{sub 2}O{sub 6}) melts has been studied using multiple-angle energy-dispersive x-ray diffraction up to 4.9 GPa and 1923 K. The first sharp diffraction peak in the structure factor shifts toward higher momentum transfer as pressure increases, indicating the shrinkage of the intermediate network in the melt. The radial distribution function shows a monotonous decrease in average T-T length and T-O-T angle with increasing pressure, but displays no detectable change in the average bond length between tetrahedrally coordinated cations and oxygen (T-O length, where T = Si{sup 4+}, Al{sup 3+}). Our observations indicate that the dominant structural changes occur in the intermediate range order at pressures up to 4.9 GPa. The changes in T-O length, T-T length, and T-O-T angle appear to correlate with the viscosity anomaly in this pressure range.

36 MATERIALS SCIENCE↗

Ab initio simulation of hydrogen bonding in ices under ultra-high pressure

In this article, as continuation of the previous publication (P. Zhang, L. Tian, Z. P. Zhang, G. Shao,and J. C. Li, J. Chem. Phys. 137, 044504 (2012)), we report a series of computational simulationresults for ices using ab initio DFT methods. The results not only reproduced the main feature ofinelastic neutron scattering spectra for ice Ih, but also other phases of ice such as VII and VIII.Furthermore, pressure dependent simulations for ice I and VIII have led us to obtain the spectra forthe symmetrical structure of ice X. The transition from normal ice to the symmetrical form shows anextraordinary behaviour of H-bonding in term of vibrations associated with inter- and intra-molecular bonds, revealing a range of phenomena which was not seen before.

Tian, Linan↗