Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTODETECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Enhanced open voltage of BiFeO{sub 3} polycrystalline film by surface modification of organolead halide perovskite

Inorganic-organolead halide perovskite CH{sub 3}NH{sub 3}PbI{sub 3} modified BiFeO{sub 3} polycrystalline film has been established. The composite photoelectrode presents much larger open voltage and several magnitudes superior photoelectric conversion performance in comparison to the ordinary BiFeO{sub 3} polycrystalline film. The I-V curve shows that the short-circuit current (J{sub sc}) is 1.74 mA·cm{sup −2} and open-circuit voltage (V{sub oc}) is 1.62 V, the device's photon to current efficiency is over 1%. The large open voltage and high photovoltaic efficiency is believed to attributed to the spontaneous polarization of composite perovskite induced by BiFeO{sub 3} lattice and modified reduced work function of the modified BiFeO{sub 3} surface. Our results clearly show that the present BiFeO{sub 3}-CH{sub 3}NH{sub 3}PbI{sub 3} planar device is capable to generate a large voltage in macro scale under visible light, leading an approach to further applications on photodetectors and optoelectronic switch.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain-balanced Si/SiGe type-II superlattices for near-infrared photodetection

Strain balanced silicon-silicon germanium type-II superlattice p-i-n photodetectors grown on a silicon germanium relaxed buffer layer are shown to exhibit an absorption band that extends beyond 0.7 eV (λ = 1.77 μm) with dark current densities of 27 μA cm{sup −2}. Simulations of the absorption edge, which are based on x-ray diffraction characterization, low observed dark current densities, and low dislocation densities, are consistent with fully strained heterostructures. Potential applications for devices made from this heterostructure design could include integrated silicon detectors, or low-noise absorption regions for infrared-extended silicon based avalanche photodiodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of minority carrier lifetime of GaInP with lateral composition modulation structure grown by molecular beam epitaxy

We report the enhancement of the minority carrier lifetime of GaInP with a lateral composition modulated (LCM) structure grown using molecular beam epitaxy (MBE). The structural and optical properties of the grown samples are studied by transmission electron microscopy and photoluminescence, which reveal the formation of vertically aligned bright and dark slabs corresponding to Ga-rich and In-rich GaInP regions, respectively, with good crystal quality. With the decrease of V/III ratio during LCM GaInP growth, it is seen that the band gap of LCM GaInP is reduced, while the PL intensity remains high and is comparable to that of bulk GaInP. We also investigate the minority carrier lifetime of LCM structures made with different flux ratios. It is found that the minority carrier lifetime of LCM GaInP is ∼37 times larger than that of bulk GaInP material, due to the spatial separation of electrons and holes by In-rich and Ga-rich regions of the LCM GaInP, respectively. We further demonstrate that the minority carrier lifetime of the grown LCM GaInP structures can easily be tuned by simply adjusting the V/III flux ratio during MBE growth, providing a simple yet powerful technique to tailor the electrical and optical properties at will. The exceptionally high carrier lifetime and the reduced band gap of LCM GaInP make them a highly attractive candidate for forming the top cell of multi-junction solar cells and can enhance their efficiency, and also make them suitable for other optoelectronics devices, such as photodetectors, where longer carrier lifetime is beneficial.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multi-spectral optical absorption in substrate-free nanowire arrays

A method is presented of fabricating gallium arsenide (GaAs) nanowire arrays of controlled diameter and period by reactive ion etching of a GaAs substrate containing an indium gallium arsenide (InGaP) etch stop layer, allowing the precise nanowire length to be controlled. The substrate is subsequently removed by selective etching, using the same InGaP etch stop layer, to create a substrate-free GaAs nanowire array. The optical absorptance of the nanowire array was then directly measured without absorption from a substrate. We directly observe absorptance spectra that can be tuned by the nanowire diameter, as explained with rigorous coupled wave analysis. These results illustrate strong optical absorption suitable for nanowire-based solar cells and multi-spectral absorption for wavelength discriminating photodetectors. The solar-weighted absorptance above the bandgap of GaAs was 94% for a nanowire surface coverage of only 15%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Wearable and sensitive heart-rate detectors based on PbS quantum dot and multiwalled carbon nanotube blend film

Wearable and sensitive photodetectors (PDs) have been demonstrated based on a blend film of PbS quantum dots (QDs) and QDs modified multiwalled carbon nanotubes (MWCNTs). Owing to the synergetic effect from high light sensitivity of PbS QDs and excellent conductive and mechanical properties of MWCNTs, the blend PDs show high sensitivity and flexibility performance: device responsivity and detectivity reach 583 mA/W and 3.25 × 10{sup 12 }Jones, respectively, and could stand large number (at least 10 000 cycles) and wide angle (up to 80°) bending. Furthermore, the wearable and sensitive PDs have been applied to measure the heart rate in both red and near infrared (NIR) ranges. The presented PDs are expected to work as sensor candidates in integrated electronic skin.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Long range emission enhancement and anisotropy in coupled quantum dots induced by aligned gold nanoantenna

Quantum dot arrays have been projected as the material of choice for next generation displays and photodetectors. Extensive ongoing research aims at improving optical and electrical efficiencies of such devices. We report experimental results on non-local long range emission intensity enhancement and anisotropy in quantum dot assemblies induced by isolated and partially aligned gold nanoantennas. Spatially resolved photoluminescence clearly demonstrate that the effect is maximum, when the longitudinal surface plasmon resonance of the nanoantenna is resonant with the emission maxima of the quantum dots. We estimated the decay length of this enhancement to be ∼2.6 μm, which is considerably larger than the range of near field interaction of metal nanoantenna. Numerical simulations qualitatively capture the near field behavior of the nanorods but fail to match the experimentally observed non-local effects. We have suggested how strong interactions of quantum dots in the close packed assemblies, mediated by the nanoantennas, could lead to such observed behavior.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Air-stable short-wave infrared PbS colloidal quantum dot photoconductors passivated with Al{sub 2}O{sub 3} atomic layer deposition

A PbS colloidal quantum dot photoconductor with Al{sub 2}O{sub 3} atomic layer deposition (ALD) passivation for air-stable operation is presented. Two different types of inorganic ligands for the quantum dots, S{sup 2−} and OH{sup −}, are investigated. PbS/S{sup 2−} photoconductors with a cut-off wavelength up to 2.4 μm are obtained, and a responsivity up to 50 A/W at 1550 nm is reported. The corresponding specific detectivity is ∼3.4 × 10{sup 8} Jones at 230 K. The 3-dB bandwidth of the PbS/S{sup 2−} and PbS/OH{sup −} photodetectors is 40 Hz and 11 Hz, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Far field emission profile of pure wurtzite InP nanowires

We report on the far field emission profile of pure wurtzite InP nanowires in comparison to InP nanowires with predominantly zincblende crystal structure. The emission profile is measured on individual nanowires using Fourier microscopy. The most intense photoluminescence of wurtzite nanowires is collected at small angles with respect to the nanowire growth axis. In contrast, zincblende nanowires present a minimum of the collected light intensity in the direction of the nanowire growth. Results are explained by the orientation of electric dipoles responsible for the photoluminescence, which is different from wurtzite to zincblende. Wurtzite nanowires have dipoles oriented perpendicular to the nanowire growth direction, whereas zincblende nanowires have dipoles oriented along the nanowire axis. This interpretation is confirmed by both numerical simulations and polarization dependent photoluminescence spectroscopy. Knowledge of the dipole orientation in nanostructures is crucial for developing a wide range of photonic devices such as light-emitting diodes, photodetectors, and solar cells.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Noise and spurious pulses for Cherenkov light detection with 10-inch and 3-inch photomultipliers

A large number of large photocathode area photomultipliers are widely used in astroparticle physics detectors to measure Cherenkov light in media like water or ice. In neutrino telescopes the key element of the detector is the optical module, which consists of one or more photodetectors inside a transparent pressure-resistant glass sphere. The glass sphere serves as mechanical protection while ensuring good light transmission. The performance of the telescope is largely dependent on the presence of noise pulses present on the anode of the photomultipliers. A study was conducted of noise pulses of Hamamatsu 10-inch and 3-inch diameter photomultipliers measuring time and charge distributions of dark pulses, pre-pulses, delayed pulses, and after-pulses. In particular, an analysis on multiple after-pulses was performed on both photomultiplier models. A digital oscilloscope was used to acquire all the pulses after the main pulse during a time window of 16μs for an off-line analysis to determine the charge and time spectra and a correlation between the arrival times and the charge of each after-pulse.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Long-distance quantum key distribution with imperfect devices

Quantum key distribution over probabilistic quantum repeaters is addressed. We compare, under practical assumptions, two such schemes in terms of their secure key generation rate per memory, R{sub QKD}. The two schemes under investigation are the one proposed by Duan et al. in [Nat. 414, 413 (2001)] and that of Sangouard et al. proposed in [Phys. Rev. A 76, 050301 (2007)]. We consider various sources of imperfections in the latter protocol, such as a nonzero double-photon probability for the source, dark count per pulse, channel loss and inefficiencies in photodetectors and memories, to find the rate for different nesting levels. We determine the maximum value of the double-photon probability beyond which it is not possible to share a secret key anymore. We find the crossover distance for up to three nesting levels. We finally compare the two protocols.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Negative infrared photocurrent response in layered WS{sub 2}/reduced graphene oxide hybrids

We report high performance IR photocurrent response of two-dimensional hybrid materials consisting of layered WS{sub 2} nanosheets and reduced graphene oxide (RGO). Comparative photocurrent response studies of WS{sub 2} nanosheets, RGO, and WS{sub 2}/RGO hybrids were carried out by performing current-voltage (I-V) and time-dependent current measurements with a laser excitation source having a wavelength of 808 nm. The experimental investigations indicate that WS{sub 2}/RGO hybrids show negative photocurrent response, whereas WS{sub 2} and RGO show positive photocurrent response. The negative photocurrent response of the WS{sub 2}/RGO hybrids is explained using a band alignment diagram and attributed to a charge transfer mechanism between WS{sub 2} and RGO. This analysis is further corroborated by first-principles density functional calculations. The fabricated device based on WS{sub 2}/RGO hybrids shows a photosensitivity R{sub λ} of about 6 AW{sup −1} and a quantum efficiency η of ∼924%, which demonstrates high sensitivity of the hybrid material towards IR detection. WS{sub 2}/RGO hybrids are therefore promising candidates for potential applications in optoelectronic circuits and low cost, high performance, and reliable photodetectors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoresponsive properties of ultrathin silicon nanowires

Functional silicon nanowires (SiNWs) are promising building blocks in the design of highly sensitive photodetectors and bio-chemical sensors. We systematically investigate the photoresponse properties of ultrathin SiNWs (20 nm) fabricated using a size-reduction method based on e-beam lithography and tetramethylammonium hydroxide wet-etching. The high-quality SiNWs were able to detect light from the UV to the visible range with excellent sensitivity (∼1 pW/array), good time response, and high photoresponsivity (R ∼ 2.5 × 10{sup 4 }A/W). Improvement of the ultrathin SiNWs' photoresponse has been observed in comparison to 40 nm counter-part nanowires. These properties are attributable to the predominance surface-effect due to the high surface-to-volume ratio of ultrathin SiNWs. Long-term measurements at different temperatures in both the forward and reverse bias directions demonstrated the stability and reliability of the fabricated device. By sensitizing the fabricated SiNW arrays with cadmium telluride quantum dots (QDs), hybrid QD SiNW devices displayed an improvement in photocurrent response under UV light, while preserving their performance in the visible light range. The fast, stable, and high photoresponse of these hybrid nanostructures is promising towards the development of optoelectronic and photovoltaic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Fabrication and optical properties of multishell InAs quantum dots on GaAs nanowires

Hybrid nanostructures combining nanowires with quantum dots promote the development of nanoelectronic and nanophotonic devices with integrated functionalities. In this work, we present a complex nanostructure with multishell quantum dots grown on nanowires. 1–4 shells of Stranski-Krastanov InAs quantum dots are grown on the sidewalls of GaAs nanowires by metal organic chemical vapor deposition. Different dot shells are separated by 8 nm GaAs spacer shells. With increasing the number of shells, the quantum dots become sparser and tend to align in one array, which is caused by the shrinkage of facets on which dots prefer to grow as well as the strain fields produced by the lower set of dots which influences the migration of In adatoms. The size of quantum dots increases with the increase of shell number due to enhanced strain fields coupling. The spectra of multishell dots exhibit multiwavelength emission, and each peak corresponds to a dot shell. This hybrid structure may serve as a promising element in nanowire intermediate band solar cells, infrared nanolasers, and photodetectors.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Coaxial Ag/ZnO/Ag nanowire for highly sensitive hot-electron photodetection

Single-nanowire photodetectors (SNPDs) are mostly propelled by p-n junctions, where the detection wavelength is constrained by the band-gap width. Here, we present a simple doping-free metal/semiconductor/metal SNPD, which shows strong detection tunability without such a material constraint. The proposed hot-electron SNPD exhibits superior optical and electrical advantages, i.e., optically the coaxial design leads to a strong asymmetrical photoabsorption and results in a high unidirectional photocurrent, as desired by the hot-electron collection; electrically the hot-electrons are generated in the region very close to the barrier, facilitating the electrical transport. Rigorous calculations predict an unbiased photoresponsivity of ∼200 nA/mW.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Toxicity evaluation of ZnO nanostructures on L929 fibroblast cell line using MTS assay

ZnO has wide applications in medical and dentistry apart from being used as optoelectronic devices such as solar cells, photodetectors, sensors and light emitting diodes (LEDs). Therefore, the toxicity evaluation is important to know the toxicity level on normal cell line. The toxicity of two grades ZnO nanostructures, ZnO-4 and ZnO-8 have been carried out using cytotoxicity test of MTS assay on L929 rat fibroblast cell line. Prior to that, ZnO-4 and ZnO-8 were characterized for its morphology, structure and optical properties using FESEM, X-ray diffraction, and Photoluminescence respectively. The two groups revealed difference in morphology and exhibit slightly shifted of near band edge emission of Photoluminescence other than having a similar calculated crystallite size of nanostructures. The viability of cells after 72h were obtained and the statistical significance value was calculated using SPSS v20. The p value is more than 0.05 between untreated and treated cell with ZnO. This insignificant value of p>0.05 can be summarized as a non-toxic level of ZnO-4 and ZnO-8 on the L929 cell line.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced tunability of plasmon induced transparency in graphene strips

The approach of slow-light efficiency manipulation is theoretically investigated in graphene analogue of electromagnetically induced transparency (EIT) system, which cannot be realized in conventional quantum regime. In this system, two graphene strips with different Fermi energies placed side by side as radiative elements have been discussed, and the coupling strength between radiative elements and dark elements is tuned by these radiative elements. Our proposed scheme exploits the tuning of coupling strength between the radiative elements and dark elements in contrast with the existing approaches that rely on tuning the damping rates of radiative or dark elements. The transparent window and group delays can be tuned by different coupling strength without changing the geometry of structure. This manipulation can be explained using a temporal coupled-mode theory. Furthermore, the hybridized states in this EIT-like system can be manipulated by tuning the Fermi energy of radiative elements. This kind of controllable electromagnetically induced transparency has many significant potential applications in optoelectronic, photodetectors, tunable sensors, and storage of optical data regimes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bulk- and layer-heterojunction phototransistors based on poly [2-methoxy-5-(2′-ethylhexyloxy-p-phenylenevinylene)] and PbS quantum dot hybrids

The responsivity (R) of a thin film photodetector is proportional to the product of its photo-induced carrier density (n) and mobility (μ). However, when choosing between layer heterojunction (LH) and bulk heterojunction (BH) field-effect phototransistors (FEpTs), it is still unclear which of the two device structures is more conducive to photodetection. A comparison study is performed on the two structures based on polymer and PbS quantum dot hybrids. Both devices exhibit ambipolar behavior, with μ{sub E} ≈ μ{sub H} = 3.7 cm{sup 2} V{sup −1} s{sup −1} for BH-FEpTs and μ{sub H} = 36 cm{sup 2} V{sup −1} s{sup −1} and μ{sub E} = 52 cm{sup 2} V{sup −1} s{sup −1} for LH-FEpTs. Because of the improvements in μ and the channel order degree (α), the responsivity of LH-FEpTs is as high as 10{sup 1 }A/W, which is as much as two orders of magnitude higher than that of BH-FEpTs (10{sup −1}A/W) under the same conditions. Although the large area of the BH improves both the exciton separation degree (β) and n in the BH-FEpT, the lack of an effective transport mechanism becomes the main constraint on high device responsivity. Therefore, LH-FEpTs are better candidates for use as photo detectors, and a “three-high” principle of high α, β, and μ is found to be required for high responsivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Broadband resonances in indium-tin-oxide nanorod arrays

There is currently much discussion within the nanophotonics community regarding the origin of wavelength selective absorption/scattering of light by the resonances in nanorod arrays. Here, we report a study of resonances in ordered indium-tin-oxide nanorod arrays resulting from waveguide-like modes. We find that with only a 2.4% geometrical coverage, micron-length nanorod arrays interact strongly with light across a surprisingly wide band from the visible to the mid-infrared, resulting in less than 10% transmission. Simulations show excellent agreement with our experimental observations. The field profile in the vicinity of the rods obtained from simulations shows that the electric field is mainly localized on the surfaces of the nanorods for all resonances. Based on our analysis, the resonances in the visible are different in character from those in the infrared. When light is incident on the array, part of it propagates in the space between the rods and part of it is guided within the rods. The phase difference (interference) at the ends of the rods forms the basis for the resonances in the visible region. The resonances in the infrared are Fabry-Perot-like resonances involving standing surface waves between the opposing ends of the rods. Simple analytical formulae predict the spectral positions of these resonances. It is suggested that these phenomena can be utilized for wavelength-selective photodetectors, modulators, and nanorod-based solar cells.

14 SOLAR ENERGY↗