Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Nonlinear Resonant Oscillations of Gas in Optimized Acoustical Resonators and the Effect of Central Blockage

Optimizing resonator shapes for maximizing the ratio of maximum to minimum gas pressure at an end of the resonator is investigated numerically. It is well known that the resonant frequencies and the nonlinear standing waveform in an acoustical resonator strongly depend on the resonator geometry. A quasi-Newton type scheme was used to find optimized axisymmetric resonator shapes achieving the maximum pressure compression ratio with an acceleration of constant amplitude. The acoustical field was solved using a one-dimensional model, and the resonance frequency shift and hysteresis effects were obtained through an automation scheme based on continuation method. Results are presented for optimizing three types of geometry: a cone, a horn-cone and a half cosine-shape. For each type, different optimized shapes were found when starting with different initial guesses. Further, the one-dimensional model was modified to study the effect of an axisymmetric central blockage on the nonlinear standing wave.

Li, Xiaofan↗

Nonlinear Resonant Oscillations of Gas in Optimized Acoustical Resonators and the Effect of Central Blockage

Optimizing resonator shapes for maximizing the ratio of maximum to minimum gas pressure at an end of the resonator is investigated numerically. It is well known that the resonant frequencies and the nonlinear standing waveform in an acoustical resonator strongly depend on the resonator geometry. A quasi-Newton type scheme was used to find optimized axisymmetric resonator shapes achieving the maximum pressure compression ratio with an acceleration of constant amplitude. The acoustical field was solved using a one-dimensional model, and the resonance frequency shift and hysteresis effects were obtained through an automation scheme based on continuation method. Results are presented for optimizing three types of geometry: a cone, a horn-cone and a half cosine- shape. For each type, different optimized shapes were found when starting with different initial guesses. Further, the one-dimensional model was modified to study the effect of an axisymmetric central blockage on the nonlinear standing wave.

Li, Xiao-Fan↗

Conjugate gradient determination of optimal plane changes for a class of three-impulse transfers between noncoplanar circular orbits

A particular type of three-impulse transfer between two circular orbits is analyzed. The possibility of three plane changes is recognized, and the problem is to optimally distribute these plane changes to minimize the sum of the individual impulses. Numerical difficulties and their solution are discussed. Numerical results obtained from a conjugate gradient technique are presented for both the case where the individual plane changes are unconstrained and for the case where they are constrained. Possibly not unexpectedly, multiple minima are found. The techniques presented could be extended to the finite burn case, but primarily the contents are addressed to preliminary mission design and vehicle sizing.

Burrows, R. R.↗

Discrete-continuous variable structural synthesis using dual methods

Approximation concepts and dual methods are extended to solve structural synthesis problems involving a mix of discrete and continuous sizing type of design variables. Pure discrete and pure continuous variable problems can be handled as special cases. The basic mathematical programming statement of the structural synthesis problem is converted into a sequence of explicit approximate primal problems of separable form. These problems are solved by constructing continuous explicit dual functions, which are maximized subject to simple nonnegativity constraints on the dual variables. A newly devised gradient projection type of algorithm called DUAL 1, which includes special features for handling dual function gradient discontinuities that arise from the discrete primal variables, is used to find the solution of each dual problem. Computational implementation is accomplished by incorporating the DUAL 1 algorithm into the ACCESS 3 program as a new optimizer option. The power of the method set forth is demonstrated by presenting numerical results for several example problems, including a pure discrete variable treatment of a metallic swept wing and a mixed discrete-continuous variable solution for a thin delta wing with fiber composite skins.

Schmit, L. A.↗

Optimization of Controlled Structures

A formulation is presented for the coupled optimal design of a structural system and its control by defining a composite objective function as a linear combination of two components: a structural objective and a control objective. For the case when the structural objective is a function of the structural design variables only, and when the control objective is represented by the quadratic functional of the response and control energy, one can analytically express the optimal control in terms of any set of admissible structural design variables. The expression for the optimal control is used recursively in an iterative Newton-Raphson search scheme, the goal of which is to determine a corresponding optimal set of structural design variables that minimize the composite objective function. A numerical example is given to illustrate the computational procedure.

Salama, M.↗

Computational methods for optimal linear-quadratic compensators for infinite dimensional discrete-time systems

An abstract approximation theory and computational methods are developed for the determination of optimal linear-quadratic feedback control, observers and compensators for infinite dimensional discrete-time systems. Particular attention is paid to systems whose open-loop dynamics are described by semigroups of operators on Hilbert spaces. The approach taken is based on the finite dimensional approximation of the infinite dimensional operator Riccati equations which characterize the optimal feedback control and observer gains. Theoretical convergence results are presented and discussed. Numerical results for an example involving a heat equation with boundary control are presented and used to demonstrate the feasibility of the method.

Gibson, J. S.↗

Advances and trends in computational structural mechanics

Recent developments in computational structural mechanics are reviewed with reference to computational needs for future structures technology, advances in computational models for material behavior, discrete element technology, assessment and control of numerical simulations of structural response, hybrid analysis, and techniques for large-scale optimization. Research areas in computational structural mechanics which have high potential for meeting future technological needs are identified. These include prediction and analysis of the failure of structural components made of new materials, development of computational strategies and solution methodologies for large-scale structural calculations, and assessment of reliability and adaptive improvement of response predictions.

Noor, A. K.↗

Advances and trends in computational structural mechanics

The development status and applicational range of techniques in computational structural mechanics (CSM) are evaluated with a view to advances in computational models for material behavior, discrete-element technology, quality assessment, the control of numerical simulations of structural response, hybrid analysis techniques, techniques for large-scale optimization, and the impact of new computing systems on CSM. Primary pacers of CSM development encompass prediction and analysis of novel materials for structural components, computational strategies for large-scale structural calculations, and the assessment of response prediction reliability together with its adaptive improvement.

Noor, Ahmed K.↗

Optimization and guidance of abort landing trajectories in a windshear

The abort landing problem for flight trajectories in the presence of windshear is considered with reference to flight in a vertical plane. The optimal trajectory (OT) problem is a minimax problem or Chebyshev problem of optimal control which can be converted into a Bolza problem through suitable transformations. Numerical results for several combinations of windshear intensities and initial altitudes are presented. A guidance trajectory (GT) law is implemented in feedback control form, subject to prescribed bounds on the angle of attack and its time derivative. Simplified guidance trajectories (SGT) are then considered, leading to a safe target altitude guidance. Conclusions derived for strong-to-severe windshear conditions include GT and SGT preserving the basic properties of OT, and the peak altitude drop of GT and SGT being less than that of the constant pitch trajectory and the maximum angle-of-attack trajectory.

Miele, A.↗

Minimum-time pointing control of a two-link manipulator

Minimum-time pointing control for the end-effector of a planar, two-link manipulator is developed. Minimum-time pointing control is a new area of research for multilink manipulators, which can be applied to rapid retargeting control of a multibody spacecraft. The minimum-time control problem of aligning the second link of the two-link manipulator with a given target point is considered. A numerical method called the minimizing-boundary-condition method is used to determine optimal solutions for the two-point boundary-value problem associated with first-order necessary conditions. Minimum-time solutions for different models of pointing systems are compared. The results of the comparison show that a two-link manipulator with two degree-of-freedom performs better than a conventional one-link system for minimum-time pointing.

Wie, Bong↗

Near Hartree-Fock quality GTO basis sets for the first- and third-row atoms

Energy-optimized Gaussian-type-orbital (GTO) basis sets of accuracy approaching that of numerical Hartree-Fock computations are compiled for the elements of the first and third rows of the periodic table. The methods employed in calculating the sets are explained; the applicability of the sets to electronic-structure calculations is discussed; and the results are presented in tables and briefly characterized.

Partridge, Harry↗

A boundary integral method for an inverse problem in thermal imaging

An inverse problem in thermal imaging involving the recovery of a void in a material from its surface temperature response to external heating is examined. Uniqueness and continuous dependence results for the inverse problem are demonstrated, and a numerical method for its solution is developed. This method is based on an optimization approach, coupled with a boundary integral equation formulation of the forward heat conduction problem. Some convergence results for the method are proved, and several examples are presented using computationally generated data.

Bryan, Kurt↗

Theory and computation of optimal low- and medium-thrust transfers

This report presents the formulation of the optimal low- and medium-thrust orbit transfer control problem and methods for numerical solution of the problem. The problem formulation is for final mass maximization and allows for second-harmonic oblateness, atmospheric drag, and three-dimensional, non-coplanar, non-aligned elliptic terminal orbits. We setup some examples to demonstrate the ability of two indirect methods to solve the resulting TPBVP's. The methods demonstrated are the multiple-point shooting method as formulated in H. J. Oberle's subroutine BOUNDSCO, and the minimizing boundary-condition method (MBCM). We find that although both methods can converge solutions, there are trade-offs to using either method. BOUNDSCO has very poor convergence for guesses that do not exhibit the correct switching structure. MBCM, however, converges for a wider range of guesses. However, BOUNDSCO's multi-point structure allows more freedom in quesses by increasing the node points as opposed to only quessing the initial state in MBCM. Finally, we note an additional drawback for BOUNDSCO: the routine does not supply information to the users routines for switching function polarity but only the location of a preset number of switching points.

Chuang, C.-H.↗

Emissions reduction by varying the swirler airflow split in advanced gas turbine combustors

A rich burn/quick mix/lean burn (RQL) combustor concept for reducing pollutant emissions is currently under investigation at the NASA Lewis Research Center. The current study investigates the effect of varying the mass flow rate split between the swirler passages for an equivalance ratio of 2.0 on fuel distribution, temperature distribution, and emissions for the fuel nozzle/rich burn section of an RQL combustor. It is seen that optimizing these parameters can substantially improve combustor performance and reduce combustor emissions. The optimal mass flow rate split for reducing NO(x) emissions based on the numerical study was the same as found by experiment.

Micklow, Gerald J.↗

Active adhesion concepts for in-orbit structural construction

The in-orbit assembly of structural elements is presently addressed by means of a continuum-based theory of active-adhesion contact/impact which assumes the manufacturability of active adhesion elements by piezoelectric (and similarly behaving) materials. Block bonding characteristics can furnish an effective alternative to optimal control-based, impact surge force-mitigation strategies, especially in the numerous nonsmooth control problems that are difficult to synthesize and implement. Attention is given to design concepts employing combined serial/parallel-bonded active adhesion elements composed of cascaded piezoelectric devices.

Park, K. C.↗

On the verification of the planetary system around PSR 1257 + 12

The magnitude and nature of residuals expected in the times of pulsar arrival (TOA) of the millisecond pulsar PSR 1257 + 12 as a function of the observational time span is estimated so that an observing progam may be planned to optimize the detection of a perturbation signature of a possible planetary system. The numerical and analytic procedures for evaluating the residuals are described. Calculations results are given in which a recognizable signature is shown to be a modulation of the amplitude of the TOA residual differences as a function of both epoch and observational interval. A supplementary approach involving intensive closely spaced observations over selected time intervals to find the time of a particular zero crossing of the TOA residuals is also discussed.

Peale, S. J.↗

A numerical study of active structural acoustic control in a stiffened, double wall cylinder

It is demonstrated that active structural acoustic control of complex structural/acoustic coupling can be numerically modeled using finite element and boundary element techniques in conjunction with an optimization procedure to calculate control force amplitudes. Appreciable noise reduction is obtained when the structure is excited at a structural resonance of the outer shell or an acoustic resonance of the inner cavity. Adding ring stiffeners as a connection between the inner and outer shells provides an additional structural transmission path to the interior cavity and coupled the modal behavior of the inner and outer shells. For the case of excitation at the structural resonance of the unstiffened outer shell, adding the stiffeners raises the structural resonance frequencies. The effectiveness of the control forces is reduced due to the off resonance structural response. For excitation at an acoustic cavity resonance, the controller effectiveness is enhanced.

Grosveld, Ferdinand W.↗

Vertical landing on an asteroid

This work is concerned with the final approach phase and vertical landing on an asteroid with a power-limited, electrically propelled spacecraft. With gravitational effects taken into account, a new solution to the fuel optimal vertical landing on an asteroid was obtained. In this solution, the spacecraft commanded acceleration is explicitly expressed as a function of vehicle velocity and time to go. Based on qualitative methods of analysis, the guidance strategy and the resulting trajectories were studied. It is shown that these fuel-optimal trajectories effectively assure a vertical soft landing on the asteroid. Results of numerical simulations for the vertical landing, starting from an elliptical orbit are presented.

Harel, D.↗