Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical Methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Convection in the earth's mantle

The computer is used to solve for thermal convection within the earth's mantle. A review of the knowledge of surface displacements and of the present understanding of the mantle and its relevant physical and chemical properties is contained in the paper. Applicable equations assume a Newtonian fluid layer heated from below and within, with gravity acting downward. The numerical method employs finite differences and was constructed with a view toward the faithful simulation of coupling mechanisms. It enables surveying the effect of a parameter using a relatively coarse computing mesh. Some of the results obtained are presented.

Turcotte, D. L.↗
NASA NTRS1975

Theory of photoelectron thermalization and transport in the ionosphere

A new theoretical approach for calculating the equilibrium photoelectron flux energy and pitch angle distribution in the ionosphere is presented. Photoelectron transport, secondary electron production, and energy degradation by the excitation of the discrete energy states of the neutral atmospheric constituents and by continuous energy transfer to the ambient thermal electron gas are included in a manner consistent with the Boltzmann equation which constitutes the foundation of the theory. A difference equation, suitable for numerical solution, is given, and a numerical method for the solution of this equation is discussed in detail.

Mantas, G. P.↗
NASA NTRS1975

Unified nonlinear approach to both weak and strong-interaction problems

The numerical results are obtained for heat transfer, skin-friction, and viscous interaction induced pressure for a step-wise accelerated flat plate in hypersonic flow. In the unified approach here the results are presented for both weak and strong-interaction problems without employing any linearization scheme. With the help of the numerical method used in this work an accurate prediction of wall shear can be made for the problems with plate velocity changes of 1% or larger. The obtained results indicate that the transient contribution to the induced pressure for helium is greater than that for air.

Gupta, R. N.↗
NASA NTRS1975

Transverse cracks in a strip with reinforced surfaces

The symmetrical problem of two transverse cracks in an elastic strip with reinforced surfaces is formulated in terms of a singular integral equation. The special cases of one central crack or two edge cracks are discussed. Numerical methods for solving the problems with internal cracks are outlined and stress intensity factors are presented for various geometries and degrees of surface reinforcement.

Krenk, S.↗
NASA NTRS1975

Interaction of strong shock wave with turbulent boundary layer

The reported investigation represents an extension of the time-dependent solution of separated laminar flows based on the complete Navier-Stokes equations reported by MacCormack (1971) and Carter (1973). The current study includes turbulence models in conjunction with the compressible flow equations. The calculations start with a uniform flow except for values imposed along the upstream and outer boundaries. The basic numerical method is discussed along with questions concerning the exponential accuracy and the resolution of the viscous sublayer in a compressed region.

Baldwin, B. S.↗
NASA NTRS1975

Outer planet entry probes aerothermal environment - Status of prediction methodology

A description is given of the computational codes that are to be used in studies of the heating and aerodynamic performance of entry probes for the scientific exploration of the planets Jupiter, Saturn, and Uranus. These codes include a time-asymptotic numerical method which takes into account radiative transport and equilibrium chemistry for the direct solution of the radiative, inviscid flow over an axisymmetric or two-dimensional body. The method considers both supersonic and subsonic flow in the downstream region. Another code represents a laminar, viscous-shock-layer solution.

Sutton, K.↗
NASA NTRS1975

Numerical computation of viscous flows on the lee side of blunt shapes flying at supersonic speeds

A numerical method for solving the parabolic approximation to the steady-state compressible Navier-Stokes equations is examined. The approximation neglects only the streamwise gradients of shear stress. An implicit finite difference method is used which advances the solution downstream from an initial data surface and determines the complete viscous-inviscid flow between the body and bow shock wave. It is necessary that the inviscid portion of the flow field be supersonic. Crossflow separation is determined as part of the solution. The method is applied to a 15 deg sphere-cone at 15 deg angle of attack, and the results are compared with an inviscid method-of-characteristics calculation.

Rakich, J. V.↗
NASA NTRS1975

Calculation of supersonic three-dimensional free-mixing flows using the parabolic-elliptic Navier-Stokes equations

A numerical method is presented which is valid for integration of the parabolic-elliptic Navier-Stokes equations. The solution procedure is applied to the three-dimensional supersonic flow of a jet issuing into a supersonic free stream. Difficulties associated with the imposition of free-stream boundary conditions are noted, and a coordinate transformation, which maps the point at infinity onto a finite value, is introduced to alleviate these difficulties. Results are presented for calculations of a square jet and varying-aspect-ratio rectangular jets. The solution behavior varies from axisymmetry for the square jet to nearly two-dimensional for the high-aspect-ratio rectangle, although the computation always calculates the flow as though it were truly three-dimensional.

Hirsh, R. S.↗
NASA NTRS1975

Control optimization, stabilization and computer algorithms for aircraft applications

Research related to reliable aircraft design is summarized. Topics discussed include systems reliability optimization, failure detection algorithms, analysis of nonlinear filters, design of compensators incorporating time delays, digital compensator design, estimation for systems with echoes, low-order compensator design, descent-phase controller for 4-D navigation, infinite dimensional mathematical programming problems and optimal control problems with constraints, robust compensator design, numerical methods for the Lyapunov equations, and perturbation methods in linear filtering and control.

Source record↗
NASA NTRS1975

Combustion instability with partial length acoustic liners

The development is discussed of analytical techniques and numerical methods for the prediction of the stability behavior of liquid propellant rocket combustors with partial length acoustic liners, injector face baffles, and nonlinear combustion responses. Three primary objectives included: (1) extension of the Green's Function integral-iteration technique previously developed so that nonlinear three dimensional wave propagation effects could be included in stability predictions; (2) development of an analytical technique and a computer program for the prediction of the damping effects caused by injector face baffles; and (3) inclusion of a nonlinear, wave distortation dependent, combustion response model in the global stability analysis and determination of its effect on combustor stability.

Mitchell, C. E.↗
NASA NTRS1975

Numerical studies of incompressible viscous flow in a driven cavity

A series of project papers is presented in computational fluid dynamics. The work was performed during the 1973-74 academic year at Old Dominion University. Each paper briefly examines a numerical method(s) that can be applied to the Navier-Stokes equations governing incompressible flow in a driven cavity. Solutions obtained with a cubic spline procedure are also included.

Source record↗
NASA NTRS1975

Turbulence in a gaseous hydrogen-liquid oxygen rocket combustion chamber

The intensity of turbulence and the Lagrangian correlation coefficient for a LOX-GH2 rocket combustion chamber was determined from experimental measurements of tracer gas diffusion. A combination of Taylor's turbulent diffusion theory and a numerical method for solving the conservation equations of fluid mechanics was used to calculate these quantities. Taylor's theory was extended to consider the inhomogeneity of the turbulence field in the axial direction of the combustion chamber, and an exponential function was used to represent the Lagrangian correlation coefficient. The results indicate that the value of the intensity of turbulence reaches a maximum of 14% at a location about 7" downstream from the injector. The Lagrangian correlation coefficient associated with this value is given by the above exponential expression where alpha = 10,000/sec.

Lebas, J.↗
NASA NTRS1976

Solar modulation of galactic cosmic rays 4: Latitude dependent modulation

A numerical method is outlined for solving the equation which describes the solar modulation of cosmic rays in models where interplanetary conditions can vary with heliocentric latitude. As an illustration of the use of this method, it is shown how variations in the modulation with latitude could produce the small radial gradients in the intensity that were observed from the Pioneers 10 and 11 spacecraft.

Fisk, L. A.↗
NASA NTRS1975

Optimum quantisers for a Gaussian input probability density and for the magnitude-error distortion measure

The parameters of non-uniform and uniform quantizers up to ten bits of quantization, optimum for a Gaussian input probability and for the magnitude-error distortion criterion are computed. Optimum quantizers must be understood as quantizers with minimum distortion. The numerical method used for the optimization converges relatively rapidly. The comparison between optimum non-uniform quantizers and optimum uniform quantizers is made.

Demaret, J. C.↗
NASA NTRS1975

Numerical calculation of the internal flow field in a centrifugal compressor impeller

An iterative numerical method has been developed for the calculation of steady, three-dimensional, viscous, compressible flow fields in centrifugal compressor impellers. The computer code, which embodies the method, solves the steady three dimensional, compressible Navier-Stokes equations in rotating, curvilinear coordinates. The solution takes place on blade-to-blade surfaces of revolution which move from the hub to the shroud during each iteration.

Walitt, L.↗
NASA NTRS1976

Numerical simulation of turbulent jet noise, part 2

Results on the numerical simulation of jet flow fields were used to study the radiated sound field, and in addition, to extend and test the capabilities of the turbulent jet simulation codes. The principal result of the investigation was the computation of the radiated sound field from a turbulent jet. In addition, the computer codes were extended to account for the effects of compressibility and eddy viscosity, and the treatment of the nonlinear terms of the Navier-Stokes equations was modified so that they can be computed in a semi-implicit way. A summary of the flow model and a description of the numerical methods used for its solution are presented. Calculations of the radiated sound field are reported. In addition, the extensions that were made to the fundamental dynamical codes are described. Finally, the current state-of-the-art for computer simulation of turbulent jet noise is summarized.

Metcalfe, R. W.↗
NASA NTRS1975

Unsteady transonic aerodynamics - An aeronautics challenge

The paper presents a review of the historical development in unsteady transonic aerodynamics, along with the foundations and accomplishments of several approaches to solve the equations of unsteady transonic flow. The discussion covers the linearized unsteady flow theory, numerical solution of the exact equations for an inviscid compressible gas, nonlinear small disturbance theory of transonic flow and linearization of the unsteady component about the nonlinear solution for the steady state, local linearization solution for unsteady transonic flow, unsteady transonic flow theory for slender wings and bodies, and three-dimensional unsteady transonic flows. The relation between the calculated results and experiment is examined. It is shown that the newly emerging numerical methods are capable of solving the nonlinear equations for two-dimensional flow and can be extended to three-dimensional flows.

Spreiter, J. R.↗
NASA NTRS1975

Multiple slot skin friction reduction

The paper investigates analytically the effect of multiple slot injection on skin friction for a representative fuselage shape (ogive-cylinder body) and evaluates the potential of slot injection as a drag reduction system in subsonic flow. Typical CTOL cruise flight conditions (Mach number equals 0.82 at altitudes of 11 km) were adopted for a fuselage 67.06 m in length and with maximum diameter of 7.32 m. The numerical method of Price and Harris (1972) was used to calculate the boundary-layer characteristics up to the first slot, while the finite-difference method of Beckwith and Bushnell (1971) was used to calculate the velocity profile downstream of one, three, five, or ten slots. An integral expression is proposed for characterizing skin friction reduction effectiveness, and it is seen that large reductions in viscous drag (50%) are available through slot injection. Skin friction reduction is improved by increasing the number of injection slots but at a diminishing rate.

Howard, F. G.↗