Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nano structures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

NASA GRC HOTPC PMC Project Overview

A review of NASA GRCs Higher Operating Temperature Propulsion Components Project (HOTPC) on polymer matrix composites (PMCs) will be described. The summary includes research from NASA GRC in-house, university and industry's cooperative programs. Current research emphasis focuses' on developing high temperature PMCs used in rapidly heated structures, erosion coatings for PMCs, nano-materials compatible with polyimide resins, and development of more durable high temperature PMCs.

Source record↗

Toxicity of Carbon Nanotubes and its Implications for Occupational and Environmental Health

This viewgraph document reviews the sources of Nano particles in the environment, the structure and properties of Carbon Nanotubes (CNTs), the physical characteristics of CNT materials, pulmonary and other health concerns of exposure to CNTs. The toxicity of CNT in rodents is summarized and some natural, and man-made sources of CNTs are shown. CNTs are electrically and thermally conductive, fibrous, biopersistent and very complicated in structures. The factors affecting toxicity of CNTs are more than size and surface area.

Lam, Chiu-wing↗

Analysis of Advanced Thermoelectric Materials and Their Functional Limits

The world's demand for energy is increasing dramatically, but the best energy conversion systems operate at approximately 30% efficiency. One way to decrease energy loss is in the recovery of waste heat using thermoelectric (TE) generators. A TE generator is device that generates electricity by exploiting heat flow across a thermal gradient. The efficiency of a TE material for power generation and cooling is determined by the dimensionless Figure of Merit (ZT): ZT = S(exp. 2)sigmaT/κ: where S is the Seebeck coefficient, sigma is the electrical conductivity, T is the absolute temperature, and κ is the thermal conductivity. The parameters are not physically independent, but intrinsically coupled since they are a function of the transport properties of electrons. Traditional research on TE materials has focused on synthesizing bulk semiconductor-type materials that have low thermal conductivity and high electrical conductivity affording ZT values of 1. The optimization of the σ/κ ratio is difficult to achieve using current material formats, as these material constants are complementary. Recent areas of research are focusing on using nanostructural artifacts that introduce specific dislocations and boundary conditions that scatter the phonons. This disrupts the physical link between thermal (phonon) and electrical (electron) transport. The result is that κ is decreased without decreasing σ. These material formats give ZT values of up to 2 which represent approximately 18% energy gain from waste heat recovery. The next challenge in developing the next generation of TE materials with superior performance is to tailor the interconnected thermoelectric physical parameters of the material system. In order to approach this problem, the fundamental physics of each parameter S, sigma, and κ need to be physically understood in their context of electron/phonon interaction for the construction of new high ZT thermoelectric devices. Is it possible to overcome the physical limit imposed by of the effect of phonon lattice oscillation and energetic electrons towards thermal conductivity? Is the Seebeck coefficient, based on the difference in voltage over temperature gradient ( deltaV/deltaT), an intrinsic parameter of each material? All these parameters were manipulated using nano-bridge and twin-lattice structural concepts at the NASA Langley Research Center. This talk will review the current trend of TE research to optimize the ZT and discuss about new approaches on increasing ZT within functional limits of each parameter.

Kim, Hyun Jung↗

Partnering With NASA JSC for Community Research Needs; Collaborative and Student Opportunities via Jacobs and PSAMS Initiative

NASA Johnson Space Center's (JSC's) Astromaterials Research and Exploration Science (ARES) Division houses a unique combination of laboratories and other assets for conducting cutting-edge planetary research. These facilities have been accessed for decades by outside scientists; over the past five years, the 16 full time contract research and technical staff members in our division have hosted a total of 223 visiting researchers, representing 35 institutions. In order to continue to provide this level of support to the planetary sciences community, and also expand our services and collaboration within the broader scientific community, we intend to submit a proposal to NASA specifically for facilities support and establishment of our laboratories as a collective, PSAMS, Planetary Sample Analyses and Mission Science. This initiative should result in substantial cost savings to PIs with NASA funding who wish to use our facilities. Another cost saving could be realized by aggregating visiting user experiments and analyses through COMPRES, which would be of particular interest to researchers in earth and material sciences. JSC is a recognized NASA center of excellence for curation, and in future will allow PIs and mission teams easy access to samples in Curation facilities that they have been approved to study. Our curation expertise could also be used for a collection of experimental run products that could be shared and distributed to COMPRES community members. These experimental run products could range from 1 bar controlled atmosphere furnace, piston cylinder, multi-anvil, CETUS (see companion abstract), to shocked products. Coordinated analyses of samples is one of the major strengths of our division, where a single sample can be prepared with minimal destruction for a variety of chemical and structural analyses, from macro to nano-scale.

Danielson, Lisa↗

Partnering With NASA JSC for Community Research Needs; Collaborative and Student Opportunities via Jacobs and PSAMS Initiative

NASA Johnson Space Center's (JSC's) Astromaterials Research and Exploration Science (ARES) Division houses a unique combination of laboratories and other assets for conducting cutting-edge planetary research. These facilities have been accessed for decades by outside scientists; over the past five years, the 16 full time contract research and technical staff members in our division have hosted a total of 223 visiting researchers, representing 35 institutions. In order to continue to provide this level of support to the planetary sciences community, and also expand our services and collaboration within the broader scientific community, we intend to submit a proposal to NASA specifically for facilities support and establishment of our laboratories as a collective, PSAMS, Planetary Sample Analyses and Mission Science. This initiative should result in substantial cost savings to PIs with NASA funding who wish to use our facilities. Another cost saving could be realized by aggregating visiting user experiments and analyses through COMPRES, which would be of particular interest to researchers in earth and material sciences. JSC is a recognized NASA center of excellence for curation, and in future will allow PIs and mission teams easy access to samples in Curation facilities that they have been approved to study. Our curation expertise could also be used for a collection of experimental run products that could be shared and distributed to COMPRES community members. These experimental run products could range from 1 bar controlled atmosphere furnace, piston cylinder, multi-anvil, CETUS (see companion abstract), to shocked products. Coordinated analyses of samples is one of the major strengths of our division, where a single sample can be prepared with minimal destruction for a variety of chemical and structural analyses, from macro to nano-scale.

Danielson, Lisa↗

Phase-change Reconfigurable Optical WavEfront Synthesis System (PROWESS)

We report the design, fabrication, and testing of electrically tunable metasurface k-space filters based on the low-loss, high-contrast phase-change material GSST and a transparent Si electrode heating architecture. A 10x10 array of PCM elements integrated with Si heaters was fabricated via foundry processes, and used to actively control the crystallinity of a metasurface consisting of GSST nano antennae. By selectively varying the structural state of individual PCM elements, specific k-vectors of transmitted light can effectively be filtered out, resulting in improved imaging quality by reducing the scattered light that reaches a detector. Optimized doping profiles in the Si heaters allow for uniform, low power, reliable and repeatable switching of the GSST state. Compared to other k-space filters, this new architecture is completely transparent to the wavelength of interest and can be actively reconfigured in real time with high performance, low power consumption and a small footprint. The 10x10 array device is a proof-of-concept demonstration that can enable high-resolution arbitrary wavefront synthesis and correction in the future, with key applications in optical communications, beam steering, remote sensing, and adaptive optics.

phase change material↗

Manufacturing, Characterization and Terrestrial Passive Radiative Cooling Performance of Nanofibrous PTFR-PEO Composite Thermal Coatings

Passive heat management is desirable in many applications since it can reduce the energy expended for cooling, for example, in buildings and automobiles. Specifically, materials with wavelength-dependent reflectance and emittance can manage incident solar fluxes while enabling passive radiative cooling by thermal emission. This study demonstrates the use of polymeric nanofibers, specifically polytetrafluoroethylene (PTFE) and polyethylene oxide (PEO) composite, as thermal coatings for passive temperature control. Employing the electrospinning fabrication process, we engineer nano and micro-scale fibrous structures, studying the influence of fabrication parameters, such as precursor material concentration and rotating collector speed, on fiber geometry and optical properties. To understand the role of material and fiber geometry on optical performance, we characterize various samples' spectral reflectance, absorptance, and transmittance using spectrophotometers interfaced with integrating spheres. The results show the potential of nanofabricated PTFE-PEO coatings as promising candidates for passive thermal control. We highlight their competitive edge by comparing their solar reflectance and emittance values to existing passive radiative thermal control materials. In essence, this study contributes to advancing passive heat management technologies, offering insights into optimizing material composition and fabrication techniques for enhanced performance in various applications.

Chieloka Ibekwe↗

Structure and Properties of the Fe/Y2O3 Interface from First Principles Calculations

Fundamentals of radiation damage are: (1) Formation of Frenkel pair (interstitial-vacancy pair) defects in the lattice; (2) Concentration of Frenkel pair defects >>> thermal equilibrium thermodynamic concentration; and (3) The radiation damage response of a material is determined by the fate of these excess Frenkel pair defects in the lattice. The objective is to understand the electronic and atomic structure of Fe/Y{sub 2}O{sub 3} interface and segregation behavior of the alloying elements at the interface. The significance of the results of this report are: (1) Provides a science based approach to design new radiation resistant materials. Obtained two controlling parameters - Dislocation density (composition, orientation relationship) and Oxygen partial pressure; (2) Applicable to any other metal/oxide interfaces (both functional and structural properties at the interface) - (a) Nano Catalysts: Oxide-supported metal catalysts Ni/ZrO{sub 2}, (b) Thermal barrier coatings (Ni/Al{sub 2}O{sub 3}), (c) Corrosion of metals and alloys.

36 MATERIALS SCIENCE↗

Occurrence and Stabilization of Colloidal and Nanoparticulate Mercury Sulfides (Final Technical Report)

Mercury contaminates the soils at several DOE sites, including facilities at Oak Ridge, Hanford, and the Savannah River site. This contamination poses a hazard to surrounding ecosystems because the metal continuously leaches to local streams and rivers and is converted to methylmercury, a neurotoxic and highly bioaccumulative form of mercury. Anaerobic microorganisms such as sulfate-reducing and iron-reducing bacteria are primarily responsible for methylmercury production in the environment. The remediation of mercury-contaminated ecosystems is difficult because we lack a poor understanding of the factors that control mercury mobilization and methylation in sediments. The objective of this project was to investigate the forms of mercury that are bioavailable to methylating bacteria. This project specifically focused on mercury-sulfide-organic matter geochemistry and the persistence of nanoparticulate HgS that are intermediates of metal sulfide precipitation reactions occurring in the presence of natural organic matter (NOM). This work involved two specific aims: 1) Investigate environmental processes that facilitate the occurrence and stabilization of nanoparticulate HgS and other metal sulfides; and (2) Investigate the occurrence of nanoparticulate HgS in sediments of the East Fork Poplar Creek, located in near a DOE facility in Oak Ridge, TN. For specific aim #1, laboratory experiments were performed to simulate metal sulfide precipitation processes in environmental systems. A key experimental variable was the type and concentration of NOM that was used in the experiments simulating metal sulfide precipitation. The characteristics of the metal sulfide nanoparticles were analyzed using a suite of analytical techniques that included X-ray based methods at DOE synchrotron facilities (National Synchrotron Light Source and Advanced Photon Source). Field sampling in Oak Ridge was performed in collaboration with colleague at the Oak Ridge National Laboratory. The experimental results demonstrated that a combination of photon scattering and spectroscopic tools can be used to characterize nanoscale structures that form during heterogeneous metal-sulfide-NOM precipitation. ZnS precipitation experiments with a low molecular weight thiol indicated the importance of specific metal-ligand binding for altering the kinetics of ZnS nanoparticle aggregation and monomer growth. However, NOM consists of macromolecular structures that may interact with nano-HgS in non-specific ways (e.g. electrosteric surface interactions. The methylation potential of nano-HgS in sediments may depend on size and crystallinity of nanoparticles and interactions with NOM. For specific aim #2, sediment core samples were collected in three separate locations along the East Fork Poplar Creek in Oak Ridge, TN in June 2011. Analysis of the sediment samples indicated that more than 90% of the Hg in the porewater is associated with colloidal material. These results highlight the importance of small particles for dominating Hg speciation in sediment porewater. Overall, this project highlights the importance of nanoscale phases for mercury speciation. Nanoparticulate HgS will be of particular importance in the anaerobic habitats of methylating microorganisms. In previous models for Hg bioavailability, nanoparticles of Hg are presumed to be unavailable for methylating bacteria. However, recent work shows that nanoparticles contribute to bioavailable Hg that greatly exceeds the contribution from larger HgS microparticles (Zhang et al., 2012). The work performed for this exploratory project lays the groundwork for further study on nanoscale mercury sulfide geochemistry and contributes to an improved understanding of Hg bioavailability and methylation potential.

54 ENVIRONMENTAL SCIENCES↗

Fluid-based gating mechanism with tunable multiphase selectivity and antifouling behavior

A gating mechanism that uses a capillary stabilized liquid as a reversible, reconfigurable gate that fills and seals pores in the closed state, and creates a non-fouling, liquid-lined pore in the open state is disclosed. Theoretical modeling and experiments demonstrate that for each transport substance, the gating threshold—the pressure needed to open the pores—can be rationally tuned over a wide pressure range. This enables realizing in one system differential response profiles for a variety of liquids and gases, even letting liquids flow through the pore while preventing gas from escaping. These capabilities allow dynamic modulation of gas-liquid sorting and to separate multi-phase mixtures, with the liquid lining ensuring sustained antifouling behavior. Because the liquid gating strategy enables efficient short-term and long-term operation and can be applied to a variety of pore structures and membrane materials, and to nano, micro as well as macroscale fluid systems, the gating systems is useful in a wide range of applications.

36 MATERIALS SCIENCE↗

Static electric field enhancement in nanoscale structures

We study the effect of local atomic- and nano-scale protrusions on field emission and, in particular, on the local field enhancement which plays a key role as known from the Fowler-Nordheim model of electronic emission. We study atomic size defects which consist of right angle steps forming an infinite length staircase on a tungsten surface. This structure is embedded in a 1 GV/m ambient electrostatic field. We perform calculations based upon density functional theory in order to characterize the total and induced electronic densities as well as the local electrostatic fields taking into account the detailed atomic structure of the metal. We show how the results must be processed to become comparable with those of a simple homogeneous tungsten sheet electrostatic model. We also describe an innovative procedure to extrapolate our results to nanoscale defects of larger sizes, which relies on the microscopic findings to guide, tune, and improve the homogeneous metal model, thus gaining predictive power. Furthermore, we evidence analytical power laws for the field enhancement characterization. The main physics-wise outcome of this analysis is that limited field enhancement is to be expected from atomic- and nano-scale defects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Realization of all-optical plasmonic MIM split square ring resonator switch

In this work, a configuration of nano plasmonic switch is proposed and investigated. The structure is comprised of the combination of split square ring and straight waveguides. Simulations are done based on Finite-Difference-Time Domain method. The structure is based on metal-insulator-metal configuration. Split square ring and straight waveguides are consisted of air, which are situated in a silver background. The proposed switch can confine light to sub-wavelength dimensions (on the order of nano meter); therefore it can be used in highly integrated optical circuits. The split square ring structure can operate both directly or reversely based on the split position. The transmitted powers in different cases of split square switch are acceptable and higher than 0.6. Therefore, the proposed switch is an appropriate candidate for highly integrated optical communication systems.

42 ENGINEERING↗

Structural and transport properties of double perovskite Dy{sub 2}NiMnO{sub 6}

Highlights: • Sol–gel citrate method is used to prepare the double perovskite Dy{sub 2}NiMnO{sub 6}. • Structure and dielectric relaxation of the sample are studied for nano and bulk phases. • The relaxation mechanism of the sample is modeled by Cole–Cole equation. • With increasing sintering temperature conductivity increases. • Electronic structures and magnetic properties have been studied by DFT calculations. - Abstract: The double perovskite oxide Dy{sub 2}NiMnO{sub 6} (DNMO) is synthesized in nano and bulk phase by the sol–gel citrate method. The Rietveld refinement of X-ray diffraction pattern of the sample at room temperature shows the monoclinic P2{sub 1}/n phase. Dielectric relaxation of the sample is investigated in the impedance and electric modulus formalisms in the frequency range from 50 Hz to 1 MHz and in the temperature range from 253 to 415 K. The Cole–Cole model is used to explain the relaxation mechanism in DNMO. The frequency-dependent maxima in the imaginary part of impedance are found to obey an Arrhenius law with activation energy of 0.346 and 0.344 eV for nano and bulk DNMO, respectively. A significant increase in conductivity of bulk DNMO has been observed than that of the nanoceramic. Electronic structures and magnetic properties of DNMO have been studied by performing first principles calculation based on density functional theory.

36 MATERIALS SCIENCE↗

Encapsulating micro-nano Si/SiO x into conjugated nitrogen-doped carbon as binder-free monolithic anodes for advanced lithium ion batteries

Silicon monoxide, a promising silicon-based anode candidate for lithium-ion batteries, has recently attracted much attention for its high theoretical capacity, good cycle stability, low cost, and environmental benignity. Currently, the most critical challenge is to improve its low initial coulombic efficiency and significant volume changes during the charge–discharge processes. Herein, we report a binder-free monolithic electrode structure based on directly encapsulating micro-nano Si/SiOx particles into conjugated nitrogen-doped carbon frameworks to form monolithic, multi-core, cross-linking composite matrices. We utilize micro-nano Si/SiOx reduced by high-energy ball-milling SiO as active materials, and conjugated nitrogen-doped carbon formed by the pyrolysis of polyacrylonitrile both as binders and conductive agents. Owing to the high electrochemical activity of Si/SiOx and the good mechanical resiliency of conjugated nitrogen-doped carbon backbones, this specific composite structure enhances the utilization efficiency of SiO and accommodates its large volume expansion, as well as its good ionic and electronic conductivity. The annealed Si/SiOx/polyacrylonitrile composite electrode exhibits excellent electrochemical properties, including a high initial reversible capacity (2734 mA h g-1 with 75% coulombic efficiency), stable cycle performance (988 mA h g-1 after 100 cycles), and good rate capability (800 mA h g-1 at 1 A g-1 rate). Because the composite is naturally abundant and shows such excellent electrochemical performance, it is a promising anode candidate material for lithium-ion batteries. The binder-free monolithic architectural design also provides an effective way to prepare other monolithic electrode materials for advanced lithium-ion batteries.

25 ENERGY STORAGE↗

Photoluminescence emission at room temperature in zinc oxide nano-columns

Highlights: • ZnO nanoparticles were obtained by microwave-hydrothermal method. • X-ray diffraction reveals a hexagonal structure. • Photoluminescence emission evidenced two absorption peaks, at around 480 nm and 590 nm wavelengths. - Abstract: Hydrothermal microwave method (HTMW) was used to synthesize crystalline zinc oxide (ZnO) nano-columns at the temperature of 120 °C with a soaking time of 8 min. ZnO nano-columns were characterized by using X-ray analyses (XRD), infrared spectroscopy (FT-IR), thermogravimetric analyses (TG-DTA), field emission gun and transmission electron microscopy (FEG-SEM and TEM) and photoluminescence properties (PL). XRD results indicated that the ZnO nano-columns are free of any impurity phase and crystallize in the hexagonal structure. Typical FT-IR spectra for ZnO nano-columns presented well defined bands, indicating a substantial short-range order in the system. PL spectra consist of a broad band at 590 nm and narrow band at 480 nm corresponding to a near-band edge emission related to the recombination of excitons and level emission related to structural defects. These results show that the HTMW synthesis route is rapid, cost effective, and could be used as an alternative to obtain ZnO nano-columns in the temperature of 120 °C for 8 min.

36 MATERIALS SCIENCE↗

Nano-array based monolithic catalysts: Concept, rational materials design and tunable catalytic performance

Monolithic catalysts, also known as structured catalysts, represent an important catalyst configuration widely used in automotive, chemical, and energy industries. However, several issues associated with washcoat based monolithic catalyst preparation are ever present, such as compromised materials utilization efficiency due to a less-than-ideal wash coating process, difficulty in precise and optimum microstructure control and lack of structure-property correlation. Here, in this mini-review, we introduce the concept of nano-array catalyst, a new type of monolithic catalyst featuring high catalyst utilization efficiency, good thermal/mechanical robustness, and catalytic performance tunability. A comprehensive overview is presented with detailed discussion of the strategies for nano-array catalyst preparation and rational catalytic activity adjustment enabled by the well-defined nano-array geometry. Specifically their scalable fabrication processes are reviewed in conjunction with discussion of their various catalytic oxidation reaction performances at low temperature. Finally, we hope this review will serve as a timely and useful research guide for rational design and utilization of the new type of monolithic catalysts.

36 MATERIALS SCIENCE↗

Radiation Effects in Innovative Structural Materials

The extreme radiation environments and demanding structural conditions of next-generation fission and proposed fusion reactors will require high performance materials with very high radiation resistance. Although conventional structural materials such as ferritic/ martensitic steels offer several attractive features, there is value in exploring alternative materials systems that may offer unprecedented radiation stability while also offering good thermomechanical properties. As noted elsewhere, options for designing radiation resistance include (a) the traditional approach of introducing a very high sink strength for recombination of radiation-induced vacancies and interstitials (e.g., Ti-modified stainless steels or 'nano-cluster-strengthened ferritic alloys', (b) utilizing materials with immobile vacancies at the operating temperature (e.g., silicon carbide), and (c) utilizing certain classes of materials that inherently exhibit superior resistance to radiation defect retention and accumulation (e.g., ferritic steels). Three relatively new but promising structural materials systems were selected for investigation, based on their favorable unirradiated mechanical properties and potential for good stability under irradiation: High entropy alloys (HEAs), bulk metallic glass (BMG), and MAX phase ceramics. The high configurational entropy in HEAs might alter point defect (solute and radiation defects) diffusion processes, thus potentially enhancing the recombination of radiation-produced damage. Therefore, HEAs offer the potential of a new class of materials for radiation resistance category (c) mentioned previously. A variety of BMGs such as Zr{sub 52.5}Cu{sub 17.9}Ni{sub 14.6}Al{sub 10}Ti{sub 5} offer good mechanical properties including fracture toughness values that may exceed 100 MPa-m{sup 1/2} and near net shape fabrication potential. The lack of crystallinity in BMGs prohibits the formation of conventional Frenkel pair defects under irradiation and therefore offer the possibility of another new material system for radiation resistance category (c). MAX phase ceramics (e.g., Ti{sub 3}SiC{sub 2}, Ti{sub 3}AlC{sub 2}, Ti{sub 2}AlC) have good mechanical properties and contain a nano-laminate structure that could provide a very high point defect sink strength. Due to their refractory nature, many of the MAX phase ceramics may exhibit negligible vacancy mobility up to high temperatures. Therefore, MAX phase ceramics offer the potential to provide radiation resistance in either categories (a) and (b), depending on the operating temperature. For this study, a novel 27%Fe-27%Mn-28%Ni-18%Cr single phase face centered cubic high entropy alloy was synthesized that exhibited good strength and ductility over a wide temperature range. Zr{sub 52.5}Cu{sub 17.9}Ni{sub 14.6}Al{sub 10}Ti{sub 5} (BAM-11) was selected as a prototypic advanced BMG. Several MAX phase ceramics (e.g., Ti{sub 3}SiC{sub 2}, Ti{sub 3}AlC{sub 2}, Ti{sub 2}AlC) that have good unirradiated thermal and mechanical properties were also investigated. The irradiation damage behaviors of these three novel materials systems have been studied after fission neutron at ∼75 deg. C up to 1 dpa and Ni ion irradiation at 25- 700 deg. C up to 30 dpa (lower temperatures and doses for the BMGs). All three sets of materials generally exhibited good radiation stability within certain temperature regimes. For example, the BMG exhibited only minor (<10%) change in strength that appeared to saturate after a dose of ∼1 dpa. A key shortcoming of current BMGs are that they can not be used at temperatures >>300 deg. C due to glass to crystalline transition at elevated temperature. The MAX phase ceramics irradiated at 400-700 deg. C appeared to be in the 'low temperature' regime where vacancies are immobile and therefore the radiation hardening saturated at relatively low doses. The Ti{sub 3}SiC{sub 2} MAX phase exhibited the best overall radiation stability over a wide temperature range. The HEA exhibited fine scale dislocation loop formation, no observable cavity swelling and reduced amounts of Cr depletion compared to traditional austenitic Fe-Cr-Ni alloys after ion irradiation, which suggests suppressed point defect and solute diffusion behavior. (authors)

36 MATERIALS SCIENCE↗

Phonon Spectrum Engineering in Rolled-up Micro- and Nano-Architectures

We report on a possibility of efficient engineering of the acoustic phonon energy spectrum in multishell tubular structures produced by a novel high-tech method of self-organization of micro- and nano-architectures. The strain-driven roll-up procedure paved the way for novel classes of metamaterials such as single semiconductor radial micro- and nano-crystals and multi-layer spiral micro- and nano-superlattices. The acoustic phonon dispersion is determined by solving the equations of elastodynamics for InAs and GaAs material systems. It is shown that the number of shells is an important control parameter of the phonon dispersion together with the structure dimensions and acoustic impedance mismatch between the superlattice layers. The obtained results suggest that rolled up nano-architectures are promising for thermoelectric applications owing to a possibility of significant reduction of the thermal conductivity without degradation of the electronic transport.

acoustic phonon energy spectrum↗