Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NSTX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Divertor Heat Flux Mitigation in High-Performance H-mode Discharges in the National Spherical Torus Experiment.

Experiments conducted in high-performance 1.0 MA and 1.2 MA 6 MW NBI-heated H-mode discharges with a high magnetic flux expansion radiative divertor in NSTX demonstrate that significant divertor peak heat flux reduction and access to detachment may be facilitated naturally in a highly-shaped spherical torus (ST) configuration. Improved plasma performance with high {beta}{sub t} = 15-25%, a high bootstrap current fraction f{sub BS} = 45-50%, longer plasma pulses, and an H-mode regime with smaller ELMs has been achieved in the strongly-shaped lower single null configuration with elongation {kappa} = 2.2-2.4 and triangularity {delta} = 0.6-0.8. Divertor peak heat fluxes were reduced from 6-12 MW/m{sup 2} to 0.5-2 MW/m{sup 2} in ELMy H-mode discharges using the inherently high magnetic flux expansion f{sub m} = 16-25 and the partial detachment of the outer strike point at several D{sub 2} injection rates. A good core confinement and pedestal characteristics were maintained, while the core carbon concentration and the associated Z{sub eff} were reduced. The partially detached divertor regime was characterized by an increase in divertor radiated power, a reduction of ion flux to the plate, and a large neutral compression ratio. Spectroscopic measurements indicated a formation of a high-density, low temperature region adjacent to the outer strike point, where substantial increases in the volume recombination rate and CII, CIII emission rates was measured.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Liquid Metal Walls, Lithium, And Low Recycling Boundary Conditions In Tokamaks

At present, the only solid material believed to be a viable option for plasma-facing components (PFCs) in a fusion reactor is tungsten. Operated at the lower temperatures typical of present-day fusion experiments, tungsten is known to suffer from surface degradation during long-term exposure to helium-containing plasmas, leading to reduced thermal conduction to the bulk, and enhanced erosion. Existing alloys are also quite brittle at temperatures under 700oC. However, at a sufficiently high operating temperature (700 - 1000 oC), tungsten is selfannealing and it is expected that surface damage will be reduced to the point where tungsten PFCs will have an acceptable lifetime in a reactor environment. The existence of only one potentially viable option for solid PFCs, though, constitutes one of the most significant restrictions on design space for DEMO and follow-on fusion reactors. In contrast, there are several candidates for liquid metal-based PFCs, including gallium, tin, lithium, and tin-lithium eutectics. We will discuss options for liquid metal walls in tokamaks, looking at both high and low recycling materials. We will then focus in particular on one of the candidate liquids, lithium. Lithium is known to have a high chemical affinity for hydrogen, and has been shown in test stands1 and fusion experiments2,3 to produce a low recycling surface, especially when liquid. Because it is also low-Z and is usable in a tokamak over a reasonable temperature range (200 - 400 oC), it has been now been used as a PFC in several confinement experiments (TFTR, T11- M, CDX-U, NSTX, FTU, and TJ-II), with favorable results. The consequences of substituting low recycling walls for the traditional high recycling variety on tokamak equilibria are very extensive. We will discuss some of the expected modifications, briefly reviewing experimental results, and comparing the results to expectations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of Electron Bernstein Wave (EBW) Coupling and its Critical Dependence on EBW Collisional Loss in High-β, H-mode ST Plasmas

High-β spherical tokamak (ST) plasma conditions cut off propagation of electron cyclotron (EC) waves used for heating and current drive in conventional aspect ratio tokamaks. The electron Bernstein wave (EBW) has no density cutoff and is strongly absorbed and emitted at the EC harmonics, allowing EBWs to be used for heating and current drive in STs. However, this application requires efficient EBW coupling in the high-β, H-mode ST plasma regime. EBW emission (EBE) diagnostics and modelling have been employed on the National Spherical Torus Experiment (NSTX) to study oblique EBW to O-mode (B–X–O) coupling and propagation in H-mode plasmas. Efficient EBW coupling was measured before the L–H transition, but rapidly decayed thereafter. EBE simulations show that EBW collisional damping prior to mode conversion (MC) in the plasma scrape off reduces the coupling efficiency during the H-mode phase when the electron temperature is less than 30 eV inside the MC layer. Lithium evaporation during H-mode plasmas was successfully used to reduce this EBW collisional damping by reducing the electron density and increase the electron temperature in the plasma scrape off. Lithium conditioning increased the measured B–X–O coupling efficiency from less than 10% to 60%, consistent with EBE simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of electron Bernstein wave (EBW) coupling and its critical dependence on EBW collisional loss in high-beta, H-mode ST plasmas

High- spherical tokamak (ST) plasma conditions cut off propagation of electron cyclotron (EC) waves used for heating and current drive in conventional aspect ratio tokamaks. The electron Bernstein wave (EBW) has no density cutoff and is strongly absorbed and emitted at the EC harmonics, allowing EBWs to be used for heating and current drive in STs. However, this application requires efficient EBW coupling in the high- , H-mode ST plasma regime. EBW emission (EBE) diagnostics and modelling have been employed on the National Spherical Torus Experiment (NSTX) to study oblique EBW to O-mode (B X O) coupling and propagation in H-mode plasmas. Efficient EBW coupling was measured before the L H transition, but rapidly decayed thereafter. EBE simulations show that EBW collisional damping prior to mode conversion (MC) in the plasma scrape off reduces the coupling efficiency during the H-mode phase when the electron temperature is less than 30 eV inside the MC layer. Lithium evaporation during H-mode plasmas was successfully used to reduce this EBW collisional damping by reducing the electron density and increase the electron temperature in the plasma scrape off. Lithium conditioning increased the measured B X O coupling efficiency from less than 10% to 60%, consistent with EBE simulations.

43 PARTICLE ACCELERATORS↗

Fast response of electron-scale turbulence to auxiliary heating cessation in National Spherical Torus Experiment

In this letter, we report the first observation of the fast response of electron-scale turbulence to auxiliary heating cessation in National Spherical Torus eXperiment [Ono et al., Nucl. Fusion 40, 557 (2000)]. The observation was made in a set of RF-heated L-mode plasmas with toroidal magnetic field of 0.55 T and plasma current of 300 kA. It is observed that electron-scale turbulence spectral power (measured with a high-k collective microwave scattering system) decreases significantly following fast cessation of RF heating that occurs in less than 200 μs. The large drop in the turbulence spectral power has a short time delay of about 1–2 ms relative to the RF cessation and happens on a time scale of 0.5–1 ms, much smaller than the energy confinement time of about 10 ms. Power balance analysis shows a factor of about 2 decrease in electron thermal diffusivity after the sudden drop of turbulence spectral power. Measured small changes in equilibrium profiles across the RF cessation are unlikely able to explain this sudden reduction in the measured turbulence and decrease in electron thermal transport, supported by local linear stability analysis and both local and global nonlinear gyrokinetic simulations. The observations imply that nonlocal flux-driven mechanism may be important for the observed turbulence and electron thermal transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Triggered Confinement Enhancement and Pedestal Expansion in High-Confinement-Mode Discharges in the National Spherical Torus Experiment

We report observation of a new high performance regime in discharges in the National Spherical Torus Experiment, where the H mode edge 'pedestal' temperature doubles and the energy confinement increases by 50%. The spontaneous transition is triggered by a large edge-localized mode, either natural or externally triggered by 3D fields. The transport barrier grows inward from the edge, with a doubling of both the pedestal pressure width and the spatial extent of steep radial electric field shear. The dynamics suggest that 3D fields could be applied to reduce edge transport in fusion devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The role of parallel heat transport in the relation between upstream scrape-off layer widths and target heat flux width in H-mode plasmas of the National Spherical Torus Experiment

The physics of parallel heat transport was tested in the scrape-off layer (SOL) plasma of the National Spherical Torus Experiment [M. Ono et al., Nucl. Fusion 40, 557 (2000); S. M. Kaye et al., ibid. 45, S168 (2005)] tokamak by comparing the upstream electron temperature (T{sub e}) and density (n{sub e}) profiles measured by the midplane reciprocating probe to the heat flux (q{sub perpendicular}) profile at the divertor plate measured by an infrared camera. It is found that electron conduction explains the near SOL width data reasonably well while the far SOL, which is in the sheath limited regime, requires an ion heat flux profile broader than the electron one to be consistent with the experimental data. The measured plasma parameters indicate that the SOL energy transport should be in the conduction-limited regime for R-R{sub sep} (radial distance from the separatrix location) <2-3 cm. The SOL energy transport should transition to the sheath-limited regime for R-R{sub sep}>2-3 cm. The T{sub e}, n{sub e}, and q{sub perpendicular} profiles are better described by an offset exponential function instead of a simple exponential. The conventional relation between midplane electron temperature decay length ({lambda}{sub Te}) and target heat flux decay length ({lambda}{sub q}) is {lambda}{sub Te}=7/2{lambda}{sub q}, whereas the newly derived relation, assuming offset exponential functional forms, implies {lambda}{sub Te}=(2-2.5){lambda}{sub q}. The measured values of {lambda}{sub Te}/{lambda}{sub q} differ from the new prediction by 25%-30%. The measured {lambda}{sub q} values in the far SOL (R-R{sub sep}>2-3 cm) are 9-10 cm, while the expected values are 2.7<{lambda}{sub q}<4.9 cm (for the sheath-limited regime). We propose that the ion heat flux profile is substantially broader than the electron heat flux profile as an explanation for this discrepancy in the far SOL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling fast-ion transport during toroidal Alfven eigenmode avalanches in National Spherical Torus Experiment

Experiments on the National Spherical Torus Experiment [M. Ono et al., Nucl. Fusion 40, 557 (2000)] found strong bursts of toroidal Alfven eigenmode (TAE) activity correlated with abrupt drops in the neutron rate. A fairly complete data set offers the opportunity to benchmark the NOVA[C. Z. Cheng, Phys. Rep. 211, 1 (1992)] and ORBIT[R. B. White and M. S. Chance, Phys. Fluids 27, 2455 (1984)] codes in the low aspect ratio tokamak (ST) geometry. The internal structure of TAE was modeled with NOVA and good agreement is found with measurements made with an array of five fixed-frequency reflectometers. The fast-ion transport resulting from these bursts of multiple TAE was then modeled with the ORBIT code. The simulations are reasonably consistent with the observed drop in neutron rate, however, further refinements in both the simulation of the TAE structure and in the modeling of the fast-ion transport are needed. Benchmarking stability codes against present experiments is an important step in developing the predictive capability needed to plan future experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Iterated finite-orbit Monte Carlo simulations with full-wave fields for modeling tokamak ion cyclotron resonance frequency wave heating experiments

The five-dimensional finite-orbit Monte Carlo code ORBIT-RF[M. Choi et al., Phys. Plasmas 12, 1 (2005)] is successfully coupled with the two-dimensional full-wave code all-orders spectral algorithm (AORSA) [E. F. Jaeger et al., Phys. Plasmas 13, 056101 (2006)] in a self-consistent way to achieve improved predictive modeling for ion cyclotron resonance frequency (ICRF) wave heating experiments in present fusion devices and future ITER [R. Aymar et al., Nucl. Fusion 41, 1301 (2001)]. The ORBIT-RF/AORSA simulations reproduce fast-ion spectra and spatial profiles qualitatively consistent with fast ion D-alpha [W. W. Heidbrink et al., Plasma Phys. Controlled Fusion 49, 1457 (2007)] spectroscopic data in both DIII-D [J. L. Luxon, Nucl. Fusion 42, 614 (2002)] and National Spherical Torus Experiment [M. Ono et al., Nucl. Fusion 41, 1435 (2001)] high harmonic ICRF heating experiments. This work verifies that both finite-orbit width effect of fast-ion due to its drift motion along the torus and iterations between fast-ion distribution and wave fields are important in modeling ICRF heating experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Islands in the stream: The effect of plasma flow on tearing stability

Reducing plasma flow clearly decreases the stability of tearing modes in multiple regimes (sawtooth, hybrid) in both high- and low-aspect-ratio tokamaks (DIII-D [J. L. Luxon, Nucl. Fusion 42, 614 (2002)], Joint European Torus [M. Keilhacker and the JET Team, Plasma Phys. Controlled Fusion 41, 301 (1999)], National Spherical Torus Experiment [M. Ono, S. M. Kaye, Y.-K. M. Peng, Nucl. Fusion 40, 557 (2000)], each with distinct means of lessening rotation). Further, reducing flow makes pre-existing 'saturated' islands larger at the same beta (beta). Thus lower plasma flow impairs high-beta operation owing both to the destabilization and to the impact of tearing-mode islands. Experimental results suggest that flow shear (not flow) at the tearing rational surface is classically stabilizing, making the effective tearing stability index DELTA{sup '} of the total current density profile more negative (more stable). In this picture, with profiles and all else the same, the minimum metastable beta at which neoclassical tearing modes (NTMs) can destabilize is proportional to -DELTA{sup '} and hence lower flow and flow shear lead to possible destabilization (depending on seeding) at lower beta. Similarly, if destabilized, the saturated NTM island width is proportional to -beta/DELTA{sup '} and thus increases as flow and flow shear are reduced. A working model gives a significant level of stabilizing shear if the plasma toroidal angular flow shear -dOMEGA{sub p}hi/dr at a given rational surface is of order of the inverse of the product of the local values of the parallel magnetic shear length L{sub s} and the Alfven time tau{sub A}. Experimental data are fitted for the effect of this normalization of flow shear in a simple empirical model for both onset and saturation of tearing modes. Most theoretical literature is on the consequence of flow shear on tearing stability at zero beta; tokamaks at high beta have large magnetic Prandtl number (an issue for the sign of the flow effect) and very large Lundquist number. It is in this regime that theory will be compared with experimentally based empirical models. The consequence for future tokamaks with low rotation may be lower tearing stability than now expected.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Advances in high-harmonic fast wave physics in the National Spherical Torus Experiment

Improved core high-harmonic fast wave (HHFW) heating at longer wavelengths and during start-up and plasma current ramp-up has now been obtained by lowering the edge density with lithium wall conditioning, thereby moving the critical density for perpendicular fast-wave propagation away from the vessel wall. Lithium conditioning allowed significant HHFW core electron heating of deuterium neutral beam injection (NBI) fuelled H-mode plasmas to be observed for the first time. Large edge localized modes were observed immediately after the termination of rf power. Visible and infrared camera images show that fast wave interactions can deposit considerable rf energy on the outboard divertor. HHFW-generated parametric decay instabilities were observed to heat ions in the plasma edge and may be the cause for a measured drag on edge toroidal rotation during HHFW heating. A significant enhancement in neutron rate and fast-ion profile was measured in NBI-fuelled plasmas when HHFW heating was applied.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of poloidal velocity on the National Spherical Torus Experiment (invited)

A diagnostic suite has been developed to measure the impurity poloidal flow using charge exchange recombination spectroscopy on the National Spherical Torus Experiment. Toroidal and poloidal viewing systems measure all the quantities required to determine the radial electric field. Two sets of up/down symmetric poloidal views are used to measure both the active emission in the plane of the neutral heating beams and the background emission in a radial plane away from the neutral beams. Differential velocity measurements isolate the line-integrated poloidal velocity from apparent flows due to the energy-dependent charge exchange cross section. Six f/1.8 spectrometers measure 276 spectra to obtain 75 active and 63 background channels every 10 ms. The local measurements from a similar midplane toroidal viewing system are mapped into two dimensions to allow the inversion of poloidal line-integrated measurements to obtain local poloidal velocity profiles. The radial resolution after inversion is 0.6-1.8 cm from the plasma edge to the center.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A synthetic diagnostic for validation of electron gyroradius scale turbulence simulations against coherent scattering measurements

Comparison between spectra of short-scale density fluctuations measured with coherent electromagnetic scattering experiments and those extracted from space-resolved numerical simulations is affected by a number of systematic errors. These include the locality of scattering measurements, the different domain covered (space-resolved simulations versus wavenumber resolved measurements), and the stationarity of simulated nonlinear spectra. To bridge the gap between theory-simulations and experiments, a synthetic diagnostic for high- k scattering measurements has been developed. This synthetic scattering predicts the propagation of the beam in an anisotropic, inhomogeneous plasma and accounts for the spatial variation of the instrumental transfer function. Here the latter, in particular, is proven to provide an important calibration factor not only for the simulated spectra, but also for the measured ones, allowing the use of the synthetic diagnostic in predictive mode. Results from a case study for National Spherical Torus Experiment plasmas using high- k</em. tangential scattering system and the gyrokinetic tokamak simulation code are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Universal asymptotics of poloidal spectra of magnetic perturbations of saddle coils in tokamaks

Universal and generic features of poloidal spectra of external magnetic perturbations created by a set of saddle coils in tokamak plasmas are studied in a vacuum approximation. It is found that the poloidal mode spectra with high-accuracy are described by a linear combination of three universal asymptotical formulas which depend only on the safety factor of the equilibrium plasma and the geometry of perturbation coils. The validity of these formulas is confirmed by numerical calculations of the mode spectra in the DIII-D plasma [G. L. Jackson et al., Europhys. Conf. Abstr. 27A, P-4.47 (2007)] and a spherical tokamak, National Spherical Tokamak Experiment [D. A. Gates, et al., Nucl. Fusion 49, 104016 (2009)], plasmas perturbed by external control coils.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Edge transport and turbulence reduction with lithium coated plasma facing components in the National Spherical Torus Experiment

The coating of plasma facing components (PFCs) with lithium improves energy confinement and eliminates ELMs in the National Spherical Torus Experiment, the latter due to a relaxation of the density and pressure profiles that reduces the drive for peeling-ballooning modes. 2-D interpretive transport modeling of discharges without and with lithium shows that a reduction in the PFC recycling coefficient from R {approx} 0.98 to R {approx} 0.90 is required to match the drop in D{sub {alpha}} emission with lithium coatings. A broadening of the edge barrier region showing reduced transport coefficients is observed, with a {approx}75% drop of the D and {chi}{sub e} from 0.8 < {psi}{sub N} < 0.93 needed to match the profile relaxation with lithium coatings. Turbulence measurements using an edge reflectometry system as well as high-k microwave scattering show a decrease in density fluctuations with lithium coatings. These transport changes allow the realization of very wide pedestals, with a {approx}100% width increase relative to the reference discharges.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of multiple roots of the resistive wall mode dispersion relation, including kinetic effects

The resistive wall mode instability in tokamak plasmas has a complex frequency which can be determined by a dispersion relation that is cubic, in general, leading to three distinct roots. A simplified model of the dispersion relation, including kinetic effects, is presented and used to explore the behavior of these roots. By changing the plasma rotation frequency, it is shown that one root has a slow mode rotation frequency (less than the inverse wall time) while the other two rotate more quickly, one leading and one lagging the plasma rotation frequency. When realistic experimental parameters from the National Spherical Torus Experiment [M. Ono et al., Nucl. Fusion 40, 557 (2000)] are used, however, only one slow rotating, near-marginal stability root is found, consistent with present experiments and more detailed calculations with the MISK code [B. Hu et al., Phys. Plasmas 12, 057301 (2005)]. Electron collisionality acts to stabilize one of the rotating roots, while ion collisionality can stabilize the other. In devices with low rotation and low collisionality, these two rotating roots may manifest themselves, but they are likely to remain stable.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗