Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NATURAL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

AOI 5 Improved Efficiency of Medium- and Heavy-Duty Natural Gas and Propane (LPG) Engines

Spark-ignited heavy-duty (HD) natural gas engines typically experience efficiency losses at part-load operation due to throttling requirements needed to maintain stoichiometric combustion. A substantial portion of medium- and heavy-duty engine operation occurs in this low-load region, resulting in increased brake-specific carbon dioxide emissions and reduced overall efficiency. This project designed, developed and demonstrated cylinder deactivation (CDA) technology on an HD natural gas engine to mitigate these losses. CDA enables selective deactivation of cylinders, reducing pumping losses while maintaining required torque output and meeting vehicle noise, vibration, and harshness (NVH) targets. The project objectives were successfully achieved, demonstrating up to 12% improvement in fuel consumption over the next generation HD NG engine on key low loaded HD cycles and maintained compliance with 0.02 g/hp-hr NO x emissions with comparable or better vibrations to current product. These results confirm that CDA technology can substantially improve the fuel efficiency and environmental performance of heavy-duty natural gas engines, reinforcing their potential as a low-carbon bridge solution in the transition toward zero-emission transportation technologies.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DEVELOPMENT OF PROCESS CONTROL EQUATIONS TO SUPPORT DETOXIFICATION OF COPPER USING NATURAL HUMATE AMENDMENTS

Recent scientific research and changes in regulatory policies have led to reductions in the allowable discharges of several contaminant metals, including copper, into surface water. Low target concentrations and variable outfall conditions challenge the efficacy of traditional treatment technologies such as ion exchange. In reviewing various treatment options, scientists and engineers at the Savannah River Site (SRS) developed a treatment strategy focusing on toxicity reduction (rather than the removal of the copper) and demonstrated that the method is viable and promising for mitigating copper toxicity. The resulting outfall chemistry protects the ecosystem in the receiving stream in a manner that is equal to, or better than, technologies that remove copper to the emerging regulatory levels. Further, the proposed toxicity reduction strategy results in collateral beneficial changes in outfall water chemistry such that the outfall more closely matches the chemistry of natural streams for key parameters such as the dissolved organic carbon (DOC). The detoxification process is based on the EPA BLM. Specifically, modeling indicates that copper toxicity can be mitigated by modest additions of natural organic carbon and that the amount of amendment needed can be determined based on pH and stream flow. The organic carbon amendments proposed for the treatment/detoxification process are extracts of natural materials that are produced for use in organic agriculture. These extracts are known by several common names such as potassium humate, soluble humic acid, and a variety of brand trademarks. When used to reduce ecosystem toxicity in surface water, these amendments bind copper and compete with the biological receptor sites, resulting in a reduction of impacts to key food chain organisms such as the Daphnia ('water flea'). Design and implementation of the process is straightforward. The core equipment consists of storage tank(s), pH sensor(s), outfall flow monitor(s), variable speed pump(s), and a programmable logic controller (PLC). The PLC collects information on pH and outfall flow, and modulates the pump flow rate to meter the correct amount of amendment into the outfall. A mathematical relationship, or control equation, is programmed into the PLC and serves as the basis of the operation. A summary of the development of, and key documentation for, the process control equation is provided.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Natural Fiber Composites: A Review

The need for renewable fiber reinforced composites has never been as prevalent as it currently is. Natural fibers offer both cost savings and a reduction in density when compared to glass fibers. Though the strength of natural fibers is not as great as glass, the specific properties are comparable. Currently natural fiber composites have two issues that need to be addressed: resin compatibility and water absorption. The following preliminary research has investigated the use of Kenaf, Hibiscus cannabinus, as a possible glass replacement in fiber reinforced composites.

36 MATERIALS SCIENCE↗

Experimental Investigation of a Piloted, Natural Gas-Air Rotating Detonation Wave Combustor

Development and experimental investigation of a piloted, rotating detonation wave combustor (RDWC) designed for natural gas and air propellants is presented in the current paper. The pilot stage was designed to operate with natural gas and oxygen to extend the main stage RDWC range of operability, control its dynamics, and scale the system thermal power. The main chamber can operate with oxygen enrichment across a range of oxygen mass fraction in oxidizer flow of 23.2% (air) to 35%. An annular sting design for natural gas injection was chosen for the main stage of the RDWC to both minimize injection distance and provide modularity in injector design for future testing. Initial experiments were performed with the main chamber operating without the pilot at high pressure (10 atm) and air preheat temperatures up to 650 K. High- and low-frequency pressure measurements are analyzed to understand performance and chamber dynamics. While high-amplitude chamber dynamics with p0=pc = 60% were observed in preliminary experiments, stable detonative behavior in the main chamber has not yet been demonstrated, and further testing must be completed to define RDWC operability range before adding pilot stage operation.

20 FOSSIL-FUELED POWER PLANTS↗

Laminar burning speed measurements for hydrogen enhanced natural gas in a spherical chamber

This work presents laminar burning speed measurements for natural gas and hydrogen enhanced natural gas in gas-turbine conditions using a spherical combustion chamber at an initial temperature and pressure of 296 K and 10 atm, respectively. Natural gas and hydrogen fuels were prepared and mixed with a synthetic air mixture comprised of oxygen, nitrogen, and helium. The experimental data collected during 10 atm ignition was used to predict the LBS at elevated pressures (30 bar) to approach gas-turbine operating conditions. A significant enhancing effect of combustion pressure on LBS was observed, as well as H2 dilution. This work provides fundamental combustion data relevant to sustainable fuels to reduce economic dependence on carbon-based fossil fuels and reduce anthropogenic climate effects through 2050.

Yovino, Louis↗

Machine learning models for maintenance cost estimation in delivery trucks using diesel and natural gas fuels

The maintenance costs can represent about 15%–60% of the cost of produced goods depending on the type of goods transported. To comply with stringent emissions regulations, diesel engines are incorporated with complex after-treatment systems that demand increased maintenance. The availability of alternative fuels such as natural gas and propane has fostered the natural gas and propane powertrain systems as well as electrification options for heavy- and medium-duty vehicles. A critical barrier to adopting alternative fuel vehicles has been the lack of knowledge on comparative vehicle maintenance/repair costs with conventional diesel. Moreover, the region of operation, the type of vehicle operation, and seasonal temperature changes also affect the duty cycle which impacts the maintenance and repair costs. This study focuses on estimating the cost-per-mile for heavy-duty vehicles using machine learning models such as random forest, xgboost, neural networks, and a super-learner model. The super-learner model achieved an error as low as 0.0068 $/mile for mean absolute error and 0.0086 $/mile for root mean square error with a coefficient of determination/R-Squared of 97.28%. Specifically, the paper investigates the data collected from the maintenance and repair costs associated with delivery trucks using diesel and natural gas fuels. Since the availability of data is the major constraint, we leveraged the data collected by West Virginia University and the partnership with fleet companies. This allows for additional information related to maintenance costs and fleet-specific maintenance practices of alternative fuel vehicles. This study promotes clean fuel technologies and enables fleet management companies to adopt alternative fuel vehicles in case of similar or lower cost of maintenance compared to diesel vehicles resulting in reduced emissions and total cost of ownership.

Katreddi, Sasanka↗

Natural Allelic Variations in Highly Polyploidy Saccharum Complex

Sugarcane ( Saccharum spp.) is an important sugar and biofuel crop with high polyploid and complex genomes. The Saccharum complex, comprised of Saccharum genus and a few related genera, are important genetic resources for sugarcane breeding. A large amount of natural variation exists within the Saccharum complex. Though understanding their allelic variation has been challenging, it is critical to dissect allelic structure and to identify the alleles controlling important traits in sugarcane. To characterize natural variations in Saccharum complex, a target enrichment sequencing approach was used to assay 12 representative germplasm accessions. In total, 55,946 highly efficient probes were designed based on the sorghum genome and sugarcane unigene set targeting a total of 6 Mb of the sugarcane genome. A pipeline specifically tailored for polyploid sequence variants and genotype calling was established. BWAmem and sorghum genome approved to be an acceptable aligner and reference for sugarcane target enrichment sequence analysis, respectively. Genetic variations including 1,166,066 non-redundant SNPs, 150,421 InDels, 919 gene copy number variations, and 1,257 gene presence/absence variations were detected. SNPs from three different callers (Samtools, Freebayes, and GATK) were compared and the validation rates were nearly 90%. Based on the SNP loci of each accession and their ploidy levels, 999,258 single dosage SNPs were identified and most loci were estimated as largely homozygotes. An average of 34,397 haplotype blocks for each accession was inferred. The highest divergence time among the Saccharum spp. was estimated as 1.2 million years ago (MYA). Saccharum spp. diverged from Erianthus and Sorghum approximately 5 and 6 MYA, respectively. Furthermore, the target enrichment sequencing approach provided an effective way to discover and catalog natural allelic variation in highly polyploid or heterozygous genomes.

59 BASIC BIOLOGICAL SCIENCES↗

Expectations of Future Natural Hazards in Human Adaptation to Concurrent Extreme Events in the Colorado River Basin

Human adaptation to climate change is the outcome of long-term decisions continuously made and revised by local communities. Adaptation choices can be represented by economic investment models in which the often large upfront cost of adaptation is offset by the future benefits of avoiding losses due to future natural hazards. In this context, we investigate the role that expectations of future natural hazards have on adaptation in the Colorado River basin of the USA. We apply an innovative approach that quantifies the impacts of changes in concurrent climate extremes, with a focus on flooding events. By including the expectation of future natural hazards in adaptation models, we examine how public policies can focus on this component to support local community adaptation efforts. Findings indicate that considering the concurrent distribution of several variables makes quantification and prediction of extremes easier, more realistic, and consequently improves our capability to model human systems adaptation. Hazard expectation is a leading force in adaptation. Even without assuming increases in exposure, the Colorado River basin is expected to face harsh increases in damage from flooding events unless local communities are able to incorporate climate change and expected increases in extremes in their adaptation planning and decision making.

54 ENVIRONMENTAL SCIENCES↗

Development of a Control Platform for a Building-Scale Hybrid Solar PV-Natural Gas Microgrid

Building-scale microgrids are a type of behind-the-meter microgrids where the building operator has control of the distributed energy resources, including, in this case, a natural gas-fired microturbine in addition to solar PV and battery energy storage systems. There is a growing trend in deploying behind-the-meter microgrids due to their benefits including the resiliency of serving critical loads, especially in regions with abundant natural gas. In order to ensure distributed energy resources are dispatched optimally for the desired mode of operation, a hierarchical control platform including a centralized controller was developed and installed. The platform includes communication and control infrastructure that interface with controllers for distributed energy resources and the building automation system of a recently built energy efficient commercial building. Based on desirable outcomes under different grid and building conditions, operational modes were defined for the microgrid controller. The controller is programmed to map each mode to respective operational modes for distributed energy resources controllers. Experimental data for test runs corresponding to two operational modes confirm the communication and control infrastructure can execute hierarchical control commands. Finally, dispatch optimization for a year-long simulation of system operation is presented and the benefits of the hybrid solar PV-natural gas setup are evaluated.

Energy & Fuels↗

Data-Driven Assessment of the Impact of Hurricanes Ian and Nicole: Natural and Armored Dunes in the Aftermath of Hurricanes on Florida’s Central East Coast

Hurricanes Ian and Nicole caused devastating destruction across Florida in September and November 2022, leaving widespread damage in their wakes. This study focuses on the assessment of barrier islands’ shorelines, encompassing natural sand dunes and dune vegetation as well as armored dunes with man-made infrastructure such as seawalls. High-resolution satellite imagery from Planet was used to assess the impacts of these hurricanes on the beach shorelines of Volusia, Flagler, and St. Johns Counties on the Florida Central East Coast. Shorefront vegetation was classified into two classes. Normalized Difference Vegetation Index (NDVI) values were calculated before the hurricanes, one month after Hurricane Ian, one month after Hurricane Nicole, and one-year post landfall. LiDAR (Light Detection and Ranging) was incorporated to calculate vertical changes in the shorelines before and after the hurricanes. The results suggest that natural sand dunes were more resilient as they experienced less impact to vegetation and elevation and more substantial recovery than armored dunes. Moreover, the close timeframe of the storm events suggests a compound effect on the weakened dune systems. This study highlights the importance of understanding natural dune resilience to facilitate future adaptive management efforts because armored dunes may have long-term detrimental effects on hurricane-prone barrier islands.

54 ENVIRONMENTAL SCIENCES↗

Genetic Subtypes and Natural Resistance Mutations in HCV Genotype 4 Infected Saudi Arabian Patients

This study aimed to characterize the HCV genetic subtypes variability and the presence of natural occurring resistance-associated substitutions (RASs) in Saudi Arabia patients. A total of 17 GT patients were analyzed. Sequence analysis of NS3, NS5A, and NS5B regions was performed by direct sequencing, and phylogenetic analyses were used to determine genetic subtypes, RAS, and polymorphisms. Nine patients were infected by GT 4a, two with GT 4o and three with GT 4d. Two patients were infected with apparent recombinant virus (4a/4o/4a in NS3/NS5A/NS5B), and one patient was infected with a previously unknown, unclassifiable, virus of GT 4. Natural RASs were found in six patients (35%), including three infected by GT 4a, two by GT 4a/GT 4o/GT 4a, and one patient infected by an unknown, unclassifiable, virus of GT 4. In particular, NS3-RAS V170I was demonstrated in three patients, while NS5A-RASs (L28M, L30R, L28M + M31L) were detected in the remaining three patients. All patients were treated with sofosbuvir plus daclatasvir; three patients were lost to follow-up, whereas 14 patients completed the treatment. A sustained virological response (SVR) was obtained in all but one patient carrying NS3-RAS V170I who later relapsed. GT 4a is the most common subtype in this small cohort of Saudi Arabia patients infected with hepatitis C infection. Natural RASs were observed in about one-third of patients, but only one of them showed a treatment failure.

60 APPLIED LIFE SCIENCES↗

The Nature of Grand Minima and Maxima from Fully Nonlinear Flux Transport Dynamos

We aim to investigate the nature and occurrence characteristics of grand solar minimum and maximum periods, which are observed in the solar proxy records such as {sup 10}Be and {sup 14}C, using a fully nonlinear Babcock–Leighton type flux transport dynamo including momentum and entropy equations. The differential rotation and meridional circulation are generated from the effect of turbulent Reynolds stress and are subjected to back-reaction from the magnetic field. To generate grand minimum- and maximum-like periods in our simulations, we used random fluctuations in the angular momentum transport process, namely the Λ-mechanism, and in the Babcock–Leighton mechanism. To characterize the nature and occurrences of the identified grand minima and maxima in our simulations, we used the waiting time distribution analyses, which reflect whether the underlying distribution arises from a random or a memory-bearing process. The results show that, in the majority of the cases, the distributions of grand minima and maxima reveal that the nature of these events originates from memoryless processes. We also found that in our simulations the meridional circulation speed tends to be smaller during grand maximum, while it is faster during grand minimum periods. The radial differential rotation tends to be larger during grand maxima, while it is smaller during grand minima. The latitudinal differential rotation, on the other hand, is found to be larger during grand minima.

79 ASTRONOMY AND ASTROPHYSICS↗

Natural SM-like 126 GeV Higgs boson via nondecoupling D terms

Accommodating both a 126 GeV mass and standard model (SM)-like couplings for the Higgs has a fine-tuning price in supersymmetric models. Examples are the minimal supersymmetric standard model, in which SM-like couplings are natural, but raising the Higgs mass to 126 GeV requires a considerable tuning, and the nonminimal supersymmetric standard model, in which the situation is reversed: the Higgs is naturally heavier, but being SM-like requires some tuning. We show that models with nondecoupling D terms alleviate this tension—a 126 GeV SM-like Higgs comes out basically with no fine-tuning cost. In addition, the analysis of the fine-tuning of the extended gauge sector shows that naturalness requires the heavy gauge bosons to likely be within the reach of LHC run II.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Natural Fracture Pattern Development Using 3D Coupled Numerical Model: Mechanics and Diagenesis

In the earth's crust, while tectonic processes can mechanically create natural fractures, cementation can simultaneously grow on the surfaces of the fractures. This crystallization can affect the growth of the fractures. To more accurately address the modeling of natural fracture development, both mechanical deformation and chemical diagenesis should be carried out in an integrated manner. Here, we achieve this with a three-dimensional (3D) simulator that couples mechanical and chemical processes for natural fracture pattern development in layer confined situations. Tectonic loading over geologic time is mimicked by displacement driven boundary conditions in a 3D displacement discontinuity method (DDM) scheme. Quartz diagenesis competes with mechanical fracture opening, resulting in three different cementation conditions - open, bridging or fully infilled – which define fracture element stiffness that is used as feedback within the 3D-DDM code during propagation. An important milestone of this work is that this coupled structural diagenetic model can reproduce power-law aperture population statistics which cannot be generated using mechanics alone. More accurately estimated mechanical fracture apertures and their cementation condition is a critical step toward better permeability estimation and fluid path analysis for subsurface reservoirs.

58 GEOSCIENCES↗

VirION2: a short- and long-read sequencing and informatics workflow to study the genomic diversity of viruses in nature

Microbes play fundamental roles in shaping natural ecosystem properties and functions, but do so under constraints imposed by their viral predators. However, studying viruses in nature can be challenging due to low biomass and the lack of universal gene markers. Though metagenomic short-read sequencing has greatly improved our virus ecology toolkit—and revealed many critical ecosystem roles for viruses—microdiverse populations and fine-scale genomic traits are missed. Some of these microdiverse populations are abundant and the missed regions may be of interest for identifying selection pressures that underpin evolutionary constraints associated with hosts and environments. Though long-read sequencing promises complete virus genomes on single reads, it currently suffers from high DNA requirements and sequencing errors that limit accurate gene prediction. Here we introduce VirION2, an integrated short- and long-read metagenomic wet-lab and informatics pipeline that updates our previous method (VirION) to further enhance the utility of long-read viral metagenomics. Using a viral mock community, we first optimized laboratory protocols (polymerase choice, DNA shearing size, PCR cycling) to enable 76% longer reads (now median length of 6,965 bp) from 100-fold less input DNA (now 1 nanogram). Using a virome from a natural seawater sample, we compared viromes generated with VirION2 against other library preparation options (unamplified, original VirION, and short-read), and optimized downstream informatics for improved long-read error correction and assembly. VirION2 assemblies combined with short-read based data (‘enhanced’ viromes), provided significant improvements over VirION libraries in the recovery of longer and more complete viral genomes, and our optimized error-correction strategy using long- and short-read data achieved 99.97% accuracy. In the seawater virome, VirION2 assemblies captured 5,161 viral populations (including all of the virus populations observed in the other assemblies), 30% of which were uniquely assembled through inclusion of long-reads, and 22% of the top 10% most abundant virus populations derived from assembly of long-reads. Viral populations unique to VirION2 assemblies had significantly higher microdiversity means, which may explain why short-read virome approaches failed to capture them. These findings suggest the VirION2 sample prep and workflow can help researchers better investigate the virosphere, even from challenging low-biomass samples. Our new protocols are available to the research community on protocols.io as a ‘living document’ to facilitate dissemination of updates to keep pace with the rapid evolution of long-read sequencing technology.

Long-reads↗

Laboratory and airborne techniques for measuring fluoresence of natural surfaces

Techniques are described for obtaining fluorescence spectra from samples of natural surfaces that can be used to predict spectral regions in which these surfaces would emit solar-stimulated or laser-stimulated fluorescence detectable by remote sensor. Scattered or reflected stray light caused large errors in spectrofluorometer analysis or natural sample surfaces. Most spurious light components can be eliminated by recording successive fluorescence spectra for each sample, using identical instrument settings, first with an appropriate glass or gelatin filter on the excitation side of the sample, and subsequently with the same filter on the emission side of the sample. This technique appears more accurate than any alternative technique for testing the fluorescence of natural surfaces.

Stoertz, G. E.↗

Optimum transfer between hyperbolic asymptotes with turn angle less than the maximum natural turn angle.

The impulsive transfer of minimum characteristic velocity between two given hyperbolic asymptotes associated with a real planet is considered. The constraint of remaining above the surface of the planet introduces a maximum natural turn angle. This divides the problem naively into two categories. The first is the case when the turn angle required by the given asymptotes is less than or equal to the maximum natural turn angle. This is the more reasonable situation for a swingby maneuver, and is the case considered in this paper. The resulting optimal transfers are of five basic types. In boundary conditions space, by far the largest area of transfers are either single impulse transfers or transfers through the parabolic level requiring two finite impulses. In no case has an optimal transfer been found which uses more than two finite impulses and three infinitesimal impulses. Complete results are presented for the case in which the given turn angle is less than or equal to the maximum natural turn angle.

Walton, J. M.↗

Active experiments, magnetospheric modification, and a naturally occurring analogue

Recently, a scheme has been proposed which would modify the magnetosphere by injecting plasma near the equator beyond the plasmapause and initiating wave-particle instabilities. The expected effects have been examined theoretically. Injection of plasma into this region is also a naturally occurring phenomenon produced by the cross-tail electric fields which are associated with geomagnetic activity. For further investigation of magnetospheric instabilities, the advantages of examining artificially injected plasma (control of time and location of injection and of the volume of plasma injected) contrast with the advantages of studying natural enhancements (no extra payload, frequent occurrence). Thus, the two types of experiments are complementary. In preliminary studies of natural plasma enhancements both ULF and ELF emissions have been observed. The ELF noise is consistent with generation by the electron cyclotron instability.

Kivelson, M. G.↗