Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Metals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

The use of tetragnathid spiders as bioindicators of metal exposure at a coal ASH spill site

Abstract On 22 December 2008, a dike containing coal fly ash from the Tennessee Valley Authority Kingston Fossil Fuel Plant (TN, USA) failed, resulting in the largest coal ash spill in US history. The present study was designed to determine sediment metal concentrations at multiple site locations and to determine whether site-specific bioaccumulation of metals existed in tetragnathid spiders. Selenium and nickel were the only 2 metals to exceed the US Environmental Protection Agency sediment screening levels. Selenium concentrations in spiders were significantly higher at ash-affected sites than in those from reference sites. The ratio of methylmercury to total mercury in spiders was found to be similar to that in other organisms (65–75%), which highlights the potential use of tetragnathid spiders as an indicator species for tracing contaminant transfer between the aquatic and terrestrial ecosystems. Environ Toxicol Chem 2013;32:2065–2068. © 2013 SETAC

Otter, Ryan R.↗

Thermal Conductivity Measurements of Copper-Coated Metal Hydrides (LaNi5, Ca0.6Mn0.4Ni5, and LaNi4.75Al0.25) for use in Metal Hydride Hydrogen Compression Systems

This study was performed to supplement the limited data on metal hydrides by experimentally determining the thermal conductivity of various metal hydride powder pellets that underwent a copper coating process. Three different metal hydride powders were tested (LaNi{sub 5}, Ca{sub 0.6}Mm{sub 0.4}Ni{sub 5}, and LaNi{sub 4.75}Al{sub 0.25}) for their thermal conductivity, with variations in testing parameters, and with copper coating processes that varied from 30 to 60 s A testing apparatus was specifically designed for this experiment, and the study reported thermal conductivity values of 3-6 W/m-K.

08 HYDROGEN↗

Correlating the degree of metal–promoter interaction to ethanol selectivity over MnRh/CNTs CO hydrogenation catalysts

Multi-walled carbon nanotubes (MCNTs) were used as a support for Rh-based catalysts for high pressure (20 bar) CO hydrogenation. 3 wt% Rh/CNTs catalysts were loaded with 1 wt% and 2 wt% Mn promoter, respectively, in order to study the effect of metal–promoter interactions for ethanol synthesis. Both STEM and EXAFS results showed ≈1 nm Rh particles in promoted as well as the unpromoted catalysts, STEM and EELS results verified the enhanced metal–promoter interaction when the amount of Mn promoter increased from 1 wt% to 2 wt%. The enhancement in the degree of metal–promoter interaction leads to an increase in the ethanol selectivity. Moreover, due to the nature of CNTs (low Z number), the Mn–Rh interactions could be observed at atomic resolution during the STEM–EELS characterization, and the promoter phase is confirmed as Mn(II) oxide by XANES and EELS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Critical Parameters for Evaluating Coin Cells and Pouch Cells of Rechargeable Li-Metal Batteries

Lithium ion and lithium metal batteries have received tremendous interest in the last decade for a wide range of energy storage applications. Although great progress has been made in developing new electrode materials and concepts, it is difficult to rapidly incorporate these advances in battery technologies. A key challenge is the knowledge gap between the fundamental materials research and the cell-level understanding of the relationship between high energy and stable cycling. As a result, the literature reports are based on a wide range of experimental conditions that cannot be easily realized in realistic cells. Taking lithium metal batteries as an example, this paper briefly discusses the fundamental mechanisms that lead to the inconsistent observations in battery research. We then propose development of a standard testing protocol based on the requirements of high-energy lithium metal cells. The importance of building a standard testing protocol is emphasized to accelerate the discovery of solutions for real challenges as well as inspire innovations that are readily adaptable to real batteries.

Chen, Shuru↗

2D and 3D alkaline earth metal carboxyphosphonate hybrids: Anti-corrosion coatings for metal surfaces

Reactions of Mg{sup 2+} (1), Ca{sup 2+} (2), Sr{sup 2+} (3), or Ba{sup 2+} (4) salts with hydroxyphosphonoacetic acid (HPAA) at a 1:1 ratio yield M-HPAA layered coordination polymers. The crystal structures of 3 (two phases) and 4 have been determined by single crystal X-ray crystallography. Both stereoisomers (R and S) of HPAA are incorporated in the metal-HPAA materials. Synergistic combinations of Sr{sup 2+} or Ba{sup 2+} and HPAA at pH 7.3 are effective corrosion inhibitors for carbon steel, but are ineffective at pH 2.0. - Graphical abstract: Syntheses, characterization and crystal structures of metal-hydroxyphosphonoacetate hybrids are reported (Metal=Sr, Ba). 2D and 3D materials were prepared. Their anti-corrosion effects were studied at pH 2.0 and 7.3. It was found that anti-corrosion efficiency was demonstrated only at pH 7.3.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nonaqueous synthesis of metal oxide nanoparticles: Short review and doped titanium dioxide as case study for the preparation of transition metal-doped oxide nanoparticles

The liquid-phase synthesis of metal oxide nanoparticles in organic solvents under exclusion of water is nowadays a well-established alternative to aqueous sol-gel chemistry. In this article, we highlight some of the advantages of these routes based on selected examples. The first part reviews some recent developments in the synthesis of ternary metal oxide nanoparticles by surfactant-free nonaqueous sol-gel routes, followed by the discussion of the morphology-controlled synthesis of lanthanum hydroxide nanoparticles, and the presentation of structural peculiarities of manganese oxide nanoparticles with an ordered Mn vacancy superstructure. These examples show that nonaqueous systems, on the one hand, allow the preparation of compositionally complex oxides, and, on the other hand, make use of the organic components (initially present or formed in situ) in the reaction mixture to tailor the morphology. Furthermore, obviously even the crystal structure can differ from the corresponding bulk material like in the case of MnO nanoparticles. In the second part of the paper we present original results regarding the synthesis of dilute magnetic semiconductor TiO{sub 2} nanoparticles doped with cobalt and iron. The structural characterization as well as the magnetic properties with special attention to the doping efficiency is discussed. - Graphical abstract: In the first part of this article, nonaqueous sol-gel routes to ternary metal oxide nanoparticles are briefly reviewed, followed by the discussion of the morphology-controlled synthesis of lanthanum hydroxide nanoparticles, and the appearance of an unprecedented superstructure in MnO nanoparticles. In the second part, doping experiments of TiO{sub 2} with Fe and Co are presented, along with their characterization including magnetic measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Thermodynamics of metal-organic frameworks

Although there have been extensive studies over the past decade in the synthesis and application of metal-organic frameworks (MOFs), investigation of their thermodynamic stability and of the energetics of guest–host interactions has been much more limited. This review summarizes recent progress in experimental (calorimetric) determination of the thermodynamics of MOF materials. The enthalpies of MOFs relative to dense phase assemblages suggest only modest metastability, with a general increase of enthalpy with increasing molar volume, which becomes less pronounced at higher porosity. The energy landscape of nanoporous materials (inorganic and hybrid) consists of a pair of parallel patterns within a fairly narrow range of metastability of 5–30 kJ per mole of tetrahedra in zeolites and mesoporous silicas or per mole of metal in MOFs. Thus strong thermodynamic instability does not seem to limit framework formation. There are strong interactions within the chemisorption range for small molecule–MOF interactions with defined chemical binding at the metal centers or other specific locations. Coexistence of surface binding and confinement can lead to much stronger guest–host interactions. - Graphical abstract: Energy landscape of inorganic and hybrid porous materials. - Highlights: • Thermochemical data on various MOF structures were experimentally determined. • MOFs are moderately unstable relative to their dense phase assemblage. • Overall energetic landscape of porous materials was revealed. • Guest–host interactions in MOFs were evaluated directly using calorimetry. • Confinement effect and defined chemical binding lead to strong interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two new supramolecular metal diphosphonates: Synthesis, characterization, crystal structure and inhibiting effects on metallic corrosion

Two new divalent metal(II) aminodiphosphonates with layered structure, namely, Cu(H{sub 3}L{sup 1}){sub 2}·2H{sub 2}O (1), [H4L{sup 1}=methyl-N(CH{sub 2}PO{sub 3}H{sub 2}){sub 2}] and Cd{sub 2}(H{sub 2}L{sup 2}){sub 4}(2), [H{sub 4}L{sup 2}=n-propyl-N(CH{sub 2}PO{sub 3}H{sub 2}){sub 2}] were synthesized and characterized. The Cu(II) ions in complex 1 are octahedrally coordinated by four oxygen atoms from two chelating ligands and two phosphonate oxygen atoms from two neighboring Cu(H{sub 3}L{sup 1}){sub 2} units. The Cu(H{sub 3}L{sup 1}){sub 2} units are interconnected by bridging phosphonate groups, forming a 2-D metal phosphonate layer. The structure of complex 2 contains two unique Cd(II) ions octahedrally-coordinated by six phosphonate oxygen atoms from four H{sub 2}L{sup 2} diphosphonate anions. Corrosion inhibition performances of 1 and 2 were also compared with each other in order to study the effect of combinations of externally added Cd/H{sub 4}L{sup 2} and Cu/H{sub 4}L{sup 1} (1:1 ratio) on corrosion rates of carbon steel. It was found that at pH 3.0, Cd/H{sub 4}L{sup 2} or Cu/H{sub 4}L{sup 1} combinations do not have noticeable corrosion inhibition efficiency for carbon steel. In contrast, at pH 7.0, higher corrosion inhibition efficiency was achieved for Cd/H{sub 4}L{sup 2}. Physical characterizations such as scanning electron microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS) and Fourier transform infrared spectroscopy (FTIR) were applied to study the corrosion specimens and film material. - Graphical abstract: Two new metal phosphonates have been synthesized and characterized by single-crystal X-ray diffraction and thermogravimetric analysis. corrosion inhibition performances 1 and 2 are also compared.

36 MATERIALS SCIENCE↗

The effect of metallic implants on radiation therapy in spinal tumor patients with metallic spinal implants

The aim of this study was to evaluate the effect of metallic implants on the dose calculation for radiation therapy in patients with metallic implants and to find a way to reduce the error of dose calculation. We made a phantom in which titanium implants were inserted into positions similar to the implant positions in spinal posterior/posterolateral fusion. We compared the calculated dose of the treatment planning systems with the measured dose in the treatment equipment. We used 3 kinds of computed tomography (CT) (kilovoltage CT, extended-scaled kilovoltage CT, and megavoltage CT) and 3 kinds of treatment equipment (ARTISTE, TomoTherapy Hi-Art, and Cyberknife). For measurement of doses, we used an ionization chamber and Gafchromic external beam therapy film. The absolute doses that were measured using an ionization chamber at the isocenter in the titanium phantom were on average 1.9% lower than those in the reference phantom (p = 0.002). There was no statistically significant difference according to the kinds of CT images, the treatment equipment, and the size of the targets. As the distance from the surface of the titanium implants became closer, the measured doses tended to decrease (p < 0.001), and this showed a statistically significant difference among the kinds of CT images: the effect of metallic implants was less in the megavoltage CT than in the kilovoltage CT or the extended-scaled kilovoltage CT. The error caused by the titanium implants was beyond a clinically acceptable range. To reduce the error of dose calculation, we suggest that the megavoltage CT be used for planning. In addition, it is necessary to consider the distance between the titanium implants and the targets or the organs at risk to prescribe the dose for the target and the dose constraint for the organs at risk.

61 RADIATION PROTECTION AND DOSIMETRY↗

An Experimental and Numerical Study of Plasma Treatment Effects on Adhesive Joints of Metals, CFRTPs, and Metal–CFRTP Combinations

This work investigates the effects of plasma surface treatment on both the local adherend–adhesive interfacial strength and the global lap shear strength (LSS) of adhesively-bonded joints composed of metals, CFRTPs, and metal-CFRTP combinations, using AA6061 and CFRPPA as representative examples. Experimental and computational results show that plasma treatment improved the ratio of CFRPPA–adhesive interfacial normal strength to adhesive tensile strength (sint,n/scri,t,adhesive) from 0.59–1.00 to 0.91–1.73, leading to an average 90% increase in LSS for CFRPPA-related joints. In contrast, the LSS and sint,n/scri,t,adhesive values of AA6061–AA6061 joints (>=2.27) remained nearly unchanged after plasma treatment. The enhanced joint bonding was further supported by post-failure surface morphologies from three-dimensional profilometry and simulations, showing a transition from dominant interfacial failure to mixed modes involving interfacial, cohesive, and slight fiber-peeling failures. The LSS evolution with respect to sint,n/scri,t,adhesive was numerically established until the saturation of the LSS of various joints, and the behavior of AA6061–CFRPPA T-joints with varying interfacial strengths was also modeled. This study highlights the importance of local interfacial bonding strength, rather than global LSS, for understanding and optimizing the mechanical performance of adhesively-bonded composite–metal and composite-composite structures via different surface modification strategies.

Qiao, Yao (ORCID:0000000265867604)↗

Ligand Hole Driven Metal–Insulator Transition Exemplified in a Layered Transition Metal Oxide

The interplay of cooperative Jahn–Teller (JT) distortions and charge-disproportionation (CD) with a strong electronic correlation in transition metal oxides leads to structural symmetry breaking. Both JT and CD often manifest in the form of significant modifications in electronic and structural properties such as band splitting, metal–insulator transitions (MIT), and enhanced electron lattice interactions. Notably, the charge-disproportionation is a key electronic feature that drives the MIT. Here, we demonstrate and quantify it using first-principles calculations combining density-functional theory, dynamical mean-field theory, and spin–lattice Monte Carlo simulations. Taking Ca 2 FeMnO 6 as a prototypical example of a correlated oxide, our ab initio study shows that MIT in Ca 2 FeMnO 6 arises from the partial localization of oxygen ligand holes at alternate Fe sites that control both charge and magnetic ordering. Interestingly, the band gap was found to be fundamentally controlled by the strength of the charge-transfer energy and not by the Mott–Hubbard interactions. The novel physics and insights presented in this work reveal promising routes for tuning the electronic functionality in transition-metal oxides.

36 MATERIALS SCIENCE↗

Metallaphotoredox: The Merger of Photoredox and Transition Metal Catalysis

The merger of photoredox catalysis with transition metal catalysis, termed metallaphotoredox catalysis, has become a mainstay in synthetic methodology over the past decade. Metallaphotoredox catalysis has combined the unparalleled capacity of transition metal catalysis for bond formation with the broad utility of photoinduced electron- and energy-transfer processes. Photocatalytic substrate activation has allowed the engagement of simple starting materials in metal-mediated bond-forming processes. Moreover, electron or energy transfer directly with key organometallic intermediates has provided novel activation modes entirely complementary to traditional catalytic platforms. Finally, this Review details and contextualizes the advancements in molecule construction brought forth by metallaphotocatalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab Initio Derived Force Fields for Predicting CO 2 Adsorption and Accessibility of Metal Sites in the Metal–Organic Frameworks M-MOF-74 (M = Mn, Co, Ni, Cu)

Metal–organic frameworks (MOFs) are versatile nanoporous materials that have gained significant interest as low heat capacity, high selectivity sorbents for CO 2 capture applications. Large-scale atomistic simulations for identifying high-performance MOFs are possible, but are limited to systems for which existing molecular mechanics force fields describe the interactions between the guest and framework atoms with sufficient accuracy. However, standard force fields are not applicable to cases involving coordinatively unsaturated metal centers that can strongly bind specific sorbate molecules. It has been previously shown that improved force fields can be derived from quantum mechanical calculations. We derived force fields for an isostructural series of MOFs, M-MOF-74, where M = Mn, Co, Ni, and Cu, from first principles. Monte Carlo calculations in the Gibbs ensemble were used to calculate the CO 2 adsorption isotherms in order to assess the quality of the derived force field parameters and to determine a generally applicable procedure for obtaining a reliable force field for a targeted MOF and adsorbate system. The computed CO 2 adsorption isotherms for the different M-MOF-74 members agree with experimental measurements at low loading and show that Ni-MOF-74 possesses the highest affinity toward CO 2 and Cu-MOF-74 the weakest. In addition, we explored the source of open metal site and pore inaccessibility in these materials and quantified its impact on adsorption, especially the discrepancies often observed between experiments and simulations at high loadings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗