SEARCH · Engineering Papers

Results for “Matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

NASA NTRS1981

Wideband, high speed switch matrix development for SS-TDMA applications

The paper describes the design of an SS-TDMA microwave switch matrix being developed as part of the NASA 30/20 GHz Communications Satellite Program. A critical element in the systems development is the high-speed wideband switching capability necessary for 30/20 GHz SS-TDMA trunking service interconnections. A proof-of-concept model of a 20-by-20 microwave switch matrix with a 2.5 GHz bandwidth and 10-nanosecond switching speeds is being developed to realize this capability.

Prather, W. H.↗

NASA NTRS1983

On the resolvent condition in the Kreiss matrix theorem

The Kreiss Matrix Theorem asserts the uniform equivalence over all N x N matrices of power boundedness and a certain resolvent estimate. It is shown that the ratio of the constants in these two conditions grows linearly with N, and the optimal proportionality factor is obtained up to a factor of 2. Analogous results are also given for the related problem involving matrix exponentials. The proofs make use of a lemma that may be of independent interest, which bounds the arch length of the image of a circle in the complex plane under a rational function.

Leveque, R. J.↗

NASA NTRS1982

Spacecraft in switch matrix for wide band service applicatons in 30/20 GHz communications satellite systems

Bandwidth, switching speed, off-state isolation, and reliability over a ten-year mission were factors in determining the optimum available technology for satellite communications switching in 1982. A proof of concept model for a 20 x 20 coupled crossbar switch matrix designed with FET devices for microwave switching and with high speed CMOS LIS for switch crosspoint addressing was fabricated and tested. Results show the design is feasible for application in a multichannel SS-TDMA communications system. Expandibility can readily be achieved with this design. A conceptual design study for a 100 x 100 switch matrix utilizing a coupled crossbar architecture implemented with a monolithic microwave integrated circuits revealed technology needs for high capacity switch matrices.

Cory, B. J.↗

NASA NTRS1982

Development of a microwave 20 x 20 switch matrix for 30/20 GHz SS-TDMA application

The design and fabrication of a 3-8 GHz, 20 x 20 Satellite Switched-Time Division Multiple Access IF switch matrix applicable to a 30/20 GHz communications satellite are described. An assessment of switch architecture in 1980 concluded that the GaAs FET-based coupled crossbar switch matrix, incorporating high speed CMOS LSI logic for switch crosspoint addressing, would be the optimum technology available for communications satellite switching by 1982. This assessment was based on such factors as switching speed, bandwidth, off-state isolation, and reliability, over a 10-year mission life. A proof-of-concept model's construction and testing are presented.

Cory, B. J.↗

NASA NTRS1982

Application of matrix singular value properties for evaluating gain and phase margins of multiloop systems

A stability margin evaluation method in terms of simultaneous gain and phase changes in all loops of a multiloop system is presented. A universal gain-phase margin evaluation diagram is constructed by generalizing an existing method using matrix singular value properties. Using this diagram and computing the minimum singular value of the system return difference matrix over the operating frequency range, regions of guaranteed stability margins can be obtained. Singular values are computed for a wing flutter suppression and a drone lateral attitude control problem. The numerical results indicate that this method predicts quite conservative stability margins. In the second example if the eigenvalue magnitude is used instead of the singular value, as a measure of nearness to singularity, more realistic stability margins are obtained. However, this relaxed measure generally cannot guarantee global stability.

Mukhopadhyay, V.↗

NASA NTRS1983

A revised version of the transfer matrix method to analyze one-dimensional structures

A new and general method to analyze both free and forced vibration characteristics of one-dimensional structures is discussed in this paper. This scheme links for the first time the classical transfer matrix method with the recently developed integrating matrix technique to integrate systems of differential equations. Two alternative approaches to the problem are presented. The first is based upon the lumped parameter model to account for the inertia properties of the structure. The second releases that constraint allowing a more precise description of the physical system. The free vibration of a straight uniform beam under different support conditions is analyzed to test the accuracy of the two models. Finally some results for the free vibration of a 12th order system representing a curved, rotating beam prove that the present method is conveniently extended to more complicated structural dynamics problems.

Nitzsche, F.↗

NASA NTRS1984

Luneburg lens and optical matrix algebra research

Planar, as opposed to channelized, integrated optical circuits (IOCs) were stressed as the basis for computational devices. Both fully-parallel and systolic architectures are considered and the tradeoffs between the two device types are discussed. The Kalman filter approach is a most important computational method for many NASA problems. This approach to deriving a best-fit estimate for the state vector describing a large system leads to matrix sizes which are beyond the predicted capacities of planar IOCs. This problem is overcome by matrix partitioning, and several architectures for accomplishing this are described. The Luneburg lens work has involved development of lens design techniques, design of mask arrangements for producing lenses of desired shape, investigation of optical and chemical properties of arsenic trisulfide films, deposition of lenses both by thermal evaporation and by RF sputtering, optical testing of these lenses, modification of lens properties through ultraviolet irradiation, and comparison of measured lens properties with those expected from ray trace analyses.

Wood, V. E.↗

NASA NTRS1984

Systolic triple-matrix product calculations

In order to handle arbitrary-sized matrices with fixed-sized optical matrix processors, it is necessary to expand or contract the problem to fit the processor. This preprocessing is examined. It is applied to the type of triple-matrix product calculation needed for Kalman filtering. Emphasis will be placed on systolic-type processors.

Caulfield, H. J.↗

NASA NTRS1983

Influence of physical aging on the time-dependent properties of network epoxies and epoxy-matrix composites

The matrix-dominated properties of a network epoxy and its carbon fiber-reinforced composite are noted to be affected by sub-glass transition temperature T(g) annealing in a nitrogen atmosphere. The damping behavior, stress relaxation rate, and enthalpic state of the matrix material were found to decrease as functions of sub-T(g) annealing time. This time-dependent change in physical properties is explained on the basis of a free-volume collapse which is related to the recovery process of the nonequilibrium glassy network of the epoxy. The physical aging in network epoxies has been demonstrated to be thermoreversible. Aging kinetics are studied by means of differential scanning calorimetry, stress relaxation tests, dynamic mechanical analysis, and thermomechanical analysis.

Kong, E. S. W.↗

NASA NTRS1983

Transverse thermal expansion of carbon fiber/epoxy matrix composites

Thermal expansion coefficients and moduli of elasticity have been determined experimentally for a series of epoxy-matrix composites reinforced with carbon and Kevlar fibers. It is found that in the transverse direction the difference between the properties of the fiber and the matrix is not as pronounced as in the longitudinal direction, where the composite properties are fiber-dominated. Therefore, the pattern of fiber packing tends to affect transverse composite properties. The transverse properties of the composites tested are examined from the standpoint of the concept of homogeneity defined as the variation of packing (or lack thereof) throughout a sample.

Helmer, J. F.↗

NASA NTRS1983

High-speed wide band 20 x 20 microwave switch matrix

The use of a dynamic switching matrix for future communication satellites will significantly increase the communication channel capacity and improve the system capability and flexibility. This paper describes the design and development of a unique coupler crossbar 20 x 20 microwave switch matrix. This paper also presents the test results of the proof-of-concept model that meets the requirements for a high-speed satellite switched, time division multiple access (SS-TDMA) system.

Coban, E.↗

NASA NTRS1985

High-Speed Computer-Controlled Switch-Matrix System

High-speed computer-controlled switch-matrix system developed for communication satellites. Satellite system controlled by onboard computer and all message-routing functions between uplink and downlink beams handled by newly developed switch-matrix system. Message requires only 2-microsecond interconnect period, repeated every millisecond.

Spisz, E.↗

NASA NTRS1984

Flexible matrix composite laminated disk/ring flywheel

An energy storage flywheel consisting of a quasi-isotropic composite disk overwrapped by a circumferentially wound ring made of carbon fiber and a elastometric matrix is proposed. Through analysis it was demonstrated that with an elastomeric matrix to relieve the radial stresses, a laminated disk/ring flywheel can be designed to store a least 80.3 Wh/kg or about 68% more than previous disk/ring designs. at the same time the simple construction is preserved.

Gupta, B. P.↗

NASA NTRS1984

Fine-grained millimeter-sized objects in type 3 ordinary chondrites and their relation to chondrules and matrix

Fine-grained, opaque, silicate-rich matrix material, occurring as rims on chondrules and clasts, discrete clasts, and between chondrule and mineral fragments is a primitive component of chondrites and may resemble the material from which chondrules formed. To elucidate the relationship between chondrules and matrix and to help identify chondrule precursor material, the nimeralogy and bulk compositions of 30 mm-sized, fine-grained objects in Tieschitz (h3.6), Sharps (H3.4), Allan Hills A77299 (H3.7), Yamato 74191 (L3.6), Semarkona (LL3.0), and St. Mary's Co. (LL3.3) were studied. All are composed of submicron to micron sized material and may contain larger mineral fragments. Three texturally and mineralogically distinct types of objects were identified; all are minor components of the chondrites studied ( 1% except Sharps where melt-breccia-textured objects are approximately minus 1%). Bulk compositions of network and melt-breccia-textured objects define a rather narrow trend on a plot of Si/Al vs. Mg/Al, emphasizing a possible genetic relationship. Data show that Si/Mg is higher for network and melt-breccia-textured objects than for porphyritic and barred olivine chondrules. Melting in vaccuo of network-textured objects would cause a loss of Si relative to Mg (3), suggesting that material compositionally similar to fine grained objects could have been precursors to some chondrules.

Recca, S. I.↗

NASA NTRS1985

A T-matrix theory of galactic heavy-ion fragmentation

The theory of galactic heavy ion fragmentation is furthered by incorporating a T matrix approach into the description of the three step process of abrasion, ablation, and final state interations. The connection between this T matrix and the interaction potential is derived. For resonant states, the substitution of complex energies for real energies in the transition rate is formerly justified for up to third order processes. The previously developed abrasion-ablation fragmentation theory is rederived from first principles and is shown to result from time ordering, classical probability, and zero width resonance approximations. Improvements in the accuracy of the total fragmentation cross sections require an alternative to the latter two approximations. A Lorentz invariant differential abrasion-ablation cross section is derived which explicitly includes the previously derived abrasion total cross sections. It is demonstrated that spectral and angular distributions can be obtained from the general Lorentz invariant form.

Norbury, J. W.↗

NASA NTRS1985

Matrix Transfer Function Design for Flexible Structures: An Application

The application of matrix transfer function design techniques to the problem of disturbance rejection on a flexible space structure is demonstrated. The design approach is based on parameterizing a class of stabilizing compensators for the plant and formulating the design specifications as a constrained minimization problem in terms of these parameters. The solution yields a matrix transfer function representation of the compensator. A state space realization of the compensator is constructed to investigate performance and stability on the nominal and perturbed models. The application is made to the ACOSSA (Active Control of Space Structures) optical structure.

Brennan, T. J.↗

NASA NTRS1985

Interrelations for the elements of the scattering matrix

Light scattered by molecules and particulate matter in planetary atmospheres was analyzed. The 4x4 scattering matrix that transforms the Stokes parameters of the incident beam into those of the scattered beam is discussed. Elementary methods are described to obtain interrelations for the 16 elements of the scattering matrix, when light is scattered by a particle of arbitrary size, shape and composition or by a collection of such particles. The implications of the results for the interpretation of polarimetric data of planets with an atmosphere are outlined.

Hovenier, J. W.↗

NASA NTRS1984

Chemical feasibility of lithium as a matrix for structural composites

The chemical compatibility of lithium with tows of carbon and aramid fibers and silicon carbide and boron monofilaments was investigated by encapsulating the fibers in liquid lithium and also by sintering. The lithium did not readily wet the various fibers. In particular, very little lithium infiltration into the carbon and aramid tows was achieved and the strength of the tows was seriously degraded. The strength of the boron and silicon carbide monofilaments, however, was not affected by the liquid lithium. Therefore lithium is not feasible as a matrix for carbon and aramid fibers, but a composite containing boron or silicon carbide fibers in a lithium matrix may be feasible for specialized applications.

Swann, R. T.↗