Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Magnetic source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Advanced Manufacturing of Alpha Double Prime Iron Nitride (ADPIN): An Innovative Rare Earth Element (REE) Free Ultra-High Performance Permanent Magnet for Clean Energy Applications

Iron nitride magnets offer the potential for large magnetic remanence magnets absent any rare earth materials [1]. This project was submitted in response to the funding opportunity announcement (FOA) from the Advanced Manufacturing Office (AMO) of the Office of Energy Efficiency & Renewable Energy (EERE) of the Department of Energy (DOE): DE-FOA-0001465: Advanced Manufacturing Projects for Emerging Research Exploration; Topic Area 1: Advanced Materials; Subtopic 1.1: Innovative Advanced Materials Manufacturing for Clean Energy to explore nitriding iron powder using a fluidized bed technique which if successful would accomplish nitriding the iron powder with reduce industrial energy intensity. Of particular concern when using metal powders at high temperatures in a fluidized bed reactor is the defluidization temperature of the bed, also known as the ‘bed collapse’ temperature. Above the defluidization temperature the metal powders can no longer fluidize and instead become an undesirable packed powder bed. Using the published results from the Institute of Process Engineering at the Chinese Academy of Sciences in Beijing, China, FeNix Magnetics was able to develop a spreadsheet calculation that allowed predictive guidelines for the defluidization temperature of iron powder based on the type of carrier gas, flow rate of the carrier gas, and the iron powder diameter. FeNix Magnetics was not able to conclude whether the temperatures to avoid bed defluidization that were achievable in a fluidized bed reactor actually resulted in nitriding the iron powder to the required level. In order to measure the amount of nitrogen in the iron powder, FeNix Magnetics contracted with the DOE sponsored Advanced Photon Source (APS) at Argonne National Laboratory to conduct X-Ray diffraction measurements. Unfortunately, due to COVID-19 restrictions, the DOE sponsored APS was closed and unable to provide X-Ray Diffraction measurements during this program.

36 MATERIALS SCIENCE↗
NASA NTRS1988

The collective emission of electromagnetic waves from astrophysical jets - Luminosity gaps, BL Lacertae objects, and efficient energy transport

A model of the inner portions of astrophysical jets is constructed in which a relativistic electron beam is injected from the central engine into the jet plasma. This beam drives electrostatic plasma wave turbulence, which leads to the collective emission of electromagnetic waves. The emitted waves are beamed in the direction of the jet axis, so that end-on viewing of the jet yields an extremely bright source (BL Lacertae object). The relativistic electron beam may also drive long-wavelength electromagnetic plasma instabilities (firehose and Kelvin-Helmholtz) that jumble the jet magnetic field lines. After a sufficient distance from the core source, these instabilities will cause the beamed emission to point in random directions and the jet emission can then be observed from any direction relative to the jet axis. This combination of effects may lead to the gap turn-on of astrophysical jets. The collective emission model leads to different estimates for energy transport and the interpretation of radio spectra than the conventional incoherent synchrotron theory.

Baker, D. N.↗
NASA NTRS1990

The effects of magnetic nozzle configurations on plasma thrusters

Plasma thrusters have been operated at power levels from 10 kw to 0.1 MW. When these devices have had magnetic fields applied to them which form a nozzle configuration for the expanding plasma, they have shown marked increases in exhaust velocity which is in direct proportion to the magnitude of the applied field. Further, recent results have shown that electrode erosion may be influenced by applied magnetic fields. This research effort is directed to the experimental and computational study of the effects of applied magnetic field nozzles in the acceleration of plasma flows. Plasma source devices which eliminate the plasma interaction in normal thrusters are studied as most basic. Normal thruster configurations were studied without applied fields and with applied magnetic nozzle fields. Unique computational studies utilize existing codes which accurately include transport processes. Unique diagnostic studies supported the experimental studies to generate new data. Both computation and diagnostics were combined to indicate the physical mechanisms and transport properties that are operative in order to allow scaling and accurate prediction of thruster performance.

York, Thomas M.↗
NASA NTRS1994

RJ 051542+0104.7: A new magnetic, eclipsing, cataclysmic variable

We present photometric and spectroscopic observations of a recently identified X-ray bright, magnetic cataclysmic variable, RJ 051542+0104.7. The X-ray source was discovered serendipitously by Walter et al. (1994; Walter & Zoonematkermani 1994), and their data imply the presence of a heated white dwarf compatible with a magnetic accretion column. Buckley (1994) has reported the presence of circular polarization. Our optical photometry shows that the system undergoes eclipses with a period of 7.9835 +/- 0.0002 hours. The eclipse is 1 magnitude deep and appears to be total. Our spectra were all obtained near eclipse and show a strong blue continuum with broad Balmer emission as well as He II (4686 and 5411 A), C III/N III (4650 A) and He I lines. The blue continuum and emission lines disappear during eclipse, leaving only the spectrum of a M0 star. Using the observed magnitude during eclipse and ignoring interstellar extinction, the distance is approximately 500 pc. For the secondary to fill its Roche lobe, it must be at least 20% larger than that of a normal dM0 star. This may indicate the red dwarf is far from local thermodynamic equilibrium (LTE) due to strong magnetic braking. We find evidence for cyclotron humps in the continuum spectrum which imply a magnetic field strength in the cyclotron emitting region of up to 55 MG. The unexpected existence of a long period AM Her system should provide constraints on models of polar evolution.

Garnavich, Peter M.↗
NASA NTRS1995

Coronal structures deduced from photospheric magnetic field and He I lambda 10830 observations

The National Solar Observatory synoptic program provides an extensive and unique data base of high-resolution full-disk observations of the line-of-sight photospheric magnetic fields and of the He I lambda 10830 equivalent width. These data have been taken nearly daily for more than 21 years since 1974 and provide the opportunity to investigate the behavior of the magnetic fields in the photosphere and those inferred for the corona spanning on the time scales of a day to that of a solar cycle. The intensity of structures observed in He I lambda 10830 are strongly modulated by overlying coronal radiation; areas with low coronal emission are generally brighter in He I lambda 10830, while areas with high coronal emission are darker. For this reason, He I lambda 10830 was selected in the mid-1970's as way to identify and monitor coronal holes, magnetic fields with an open configuration, and the sources of high-speed solar wind streams. The He I lambda 10830 spectroheliograms also show a wide variety of other structures from small-scale, short-lived dark points (less than 30 arc-sec, hours) to the large-scale, long-lived two 'ribbon' flare events that follow the filament eruptions (1000 arc-sec, days). Such structures provide clues about the connections and changes in the large-scale coronal magnetic fields that are rooted in concentrations of magnetic network and active regions in the photosphere. In this paper, what observations of the photospheric magnetic field and He I lambda 10830 can tell us about the short- and long-term evolution of the coronal magnetic fields will be discussed, focussing on the quiet Sun and coronal holes. These data and what we infer from them will be compared with direct observations of the coronal structure from the Yohkoh Soft X-ray Telescope.

Harvey, Karen L.↗
NASA NTRS1991

Geodynamics branch data base for main magnetic field analysis

The data sets used in geomagnetic field modeling at GSFC are described. Data are measured and obtained from a variety of information and sources. For clarity, data sets from different sources are categorized and processed separately. The data base is composed of magnetic observatory data, surface data, high quality aeromagnetic, high quality total intensity marine data, satellite data, and repeat data. These individual data categories are described in detail in a series of notebooks in the Geodynamics Branch, GSFC. This catalog reviews the original data sets, the processing history, and the final data sets available for each individual category of the data base and is to be used as a reference manual for the notebooks. Each data type used in geomagnetic field modeling has varying levels of complexity requiring specialized processing routines for satellite and observatory data and two general routines for processing aeromagnetic, marine, land survey, and repeat data.

Langel, Robert A.↗
NASA NTRS1993

Contributions of the low-latitude boundary layer to the finite width magnetotail convection model

Convection of plasma within the terrestrial nightside plasma sheet contributes to the structure and, possibly, the dynamical evolution of the magnetotail. In order to characterize the steady state convection process, we have extended the finite tail width model of magnetotail plasma sheet convection. The model assumes uniform plasma sources and accounts for both the duskward gradient/curvature drift and the earthward E x B drift of ions in a two-dimensional magnetic geometry. During periods of slow convection (i.e., when the cross-tail electric potential energy is small relative to the source plasma's thermal energy), there is a significant net duskward displacement of the pressure-bearing ions. The electrons are assumed to be cold, and we argue that this assumption is appropriate for plasma sheet parameters. We generalize solutions previously obtained along the midnight meridian to describe the variation of the plasma pressure and number density across the width of the tail. For a uniform deep-tail source of particles, the plasma pressure and number density are unrealistically low along the near-tail dawn flank. We therefore add a secondary source of plasma originating from the dawnside low-latitude boundary layer (LLBL). The dual plasma sources contribute to the plasma pressure and number density throughout the magnetic equatorial plane. Model results indicate that the LLBL may be a significant source of near-tail central plasma sheet plasma during periods of weak convection. The model predicts a cross-tail pressure gradient from dawn to dusk in the near magnetotail. We suggest that the plasma pressure gradient is balanced in part by an oppositely directed magnetic pressure gradient for which there is observational evidence. Finally, the pressure to number density ratio is used to define the plasma 'temperature.' We stress that such quantities as temperature and polytropic index must be interpreted with care as they lose their nominal physical significance in regions where the two-source plasmas intermix appreciably and the distributions become non-Maxwellian.

Spence, H. E.↗
DOE OSTI2022

Large exotic spin torques in antiferromagnetic iron rhodium.

Spin torque is a promising tool for driving magnetization dynamics for computing technologies. These torques can be easily produced by spin-orbit effects, but for most conventional spin source materials, a high degree of crystal symmetry limits the geometry of the spin torques produced. Magnetic ordering is one way to reduce the symmetry of a material and allow exotic torques, and antiferromagnets are particularly promising because they are robust against external fields. We present spin torque ferromagnetic resonance (ST-FMR) measurements and second harmonic Hall measurements characterizing the spin torques in anti -ferromagnetic iron rhodium alloy. We report extremely large, strongly temperature-dependent exotic spin torques with a geometry apparently defined by the magnetic ordering direction. We find the spin torque efficiency of iron rhodium to be (207 +/- 94)% at 170 K and (88 +/- 32)% at room temperature. We support our conclusions with theoretical calculations showing how the antiferromagnetic ordering in iron rhodium gives rise to such exotic torques.

Gibbons, Jonathan↗
NASA NTRS1994

A coronal magnetic field model with horizontal volume and sheet currents

When globally mapping the observed photospheric magnetic field into the corona, the interaction of the solar wind and magnetic field has been treated either by imposing source surface boundary conditions that tacitly require volume currents outside the source surface or by limiting the interaction to thin current sheets between oppositely directed field regions. Yet observations and numerical Magnetohydrodynamic (MHD) calculations suggest the presence of non-force-free volume currents throughout the corona as well as thin current sheets in the neighborhoods of the interfaces between closed and open field lines or between oppositely directed open field lines surrounding coronal helmet-streamer structures. This work presents a model including both horizontal volume currents and streamer sheet currents. The present model builds on the magnetostatic equilibria developed by Bogdan and Low and the current-sheet modeling technique developed by Schatten. The calculation uses synoptic charts of the line-of-sight component of the photospheric magnetic field measured at the Wilcox Solar Observatory. Comparison of an MHD model with the calculated model results for the case of a dipole field and comparison of eclipse observations with calculations for CR 1647 (near solar minimum) show that this horizontal current-current-sheet model reproduces polar plumes and axes of corona streamers better than the source-surface model and reproduces polar plumes and axes of corona streamers better than the source-surface model and reproduces coro nal helmet structures better than the current-sheet model.

Zhao, Xuepu↗
NASA NTRS2003

Near-source and Remote Observations of Kilometric Continuum Radiation from Multispacecraft Observations

[I] Kilometric continuum (KC) radiation was first identified from Geotail plasma wave observations. Past authors have shown that this emission has a frequency range that overlaps that of the auroral kilometric radiation (AKR) but is characterized by a fine structure of narrow-bandwidth, linear features that have nearly constant or drifting frequency. This fine structure is distinct from that of AKR. KC also apparently has a distinct source region probably associated with the low-latitude inner magnetosphere, consistent with direction-finding and ray-tracing results. We present new high-resolution electric and magnetic field observations of KC obtained by the Polar plasma wave instrument in the near-source region. These observations show intense electrostatic and less intense electromagnetic emissions near the magnetic equator at the plasmapause. Simultaneously, Geotail, located at 20 to 30 RE in radial distance, observes KC in the same frequency range. These data support a possible mode-conversion source mechanism near a region of high-density gradient. High-resolution data obtained from wideband receivers on board both Polar and Cluster show closely spaced bands of emission near the magnetic equator that may be due to many nearby independent sources of EM emission perhaps associated with density fluctuations or cavities in the plasmasphere.

Menietti, J. D.↗
DOE OSTI2021

Single-ion anisotropy is necessary and appropriate to study the magnetic behavior of ${\mathrm{Tb}}^{3+}$ moments with ${J}_{\text{eff}}=\frac{1}{2}$ on the honeycomb lattice in ${\mathrm{Tb}}_{2}{\mathrm{Ir}}_{3}{\mathrm{Ga}}_{9}$

By developing models of increasing complexity, we show that a model without single-ion anisotropy (SIA) cannot explain the magnetic properties of J eff = 1 / 2 Tb 3+ moments in the orthorhombically distorted, honeycomb material Tb 2 Ir 3 Ga 9 . In four different models for the magnetization of a single honeycomb layer, the only sources of anisotropy are symmetric exchange interactions J nαβ = J nβα along three different bonds n , an anisotropic $\underline{g}$ tensor, and a Dzyalloshinskii-Moriya interaction (asymmetric exchange) that produces the observed canted moment along b . With 21 parameters, the best such model yields χ 2 = 0.065 , which is substantially smaller than χ 2 = 0.112 obtained using a Heisenberg model containing six parameters including easy-axis anisotropy. However, models without SIA fail to reproduce the linear dependence of the magnetization with a field perpendicular to the Ising axis while predicting a saturation magnetization that is far too low. Due to the complex crystal-field environments, we argue that SIA is necessary to study low-symmetry, three-dimensional J eff = 1 / 2 materials containing Tb 3+ ions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1982

Structure of the heliospheric current sheet in the early portion of sunspot cycle 21

The structure of the heliospheric current sheet on a spherical source surface of radius 2.35 solar radii has been computed via the use of a potential field model during the first year and a half after the last sunspot minimum. The solar polar magnetic field that is not fully observed in conventional magnetograph scans was included in the computation. The computed heliospheric current sheet had a quasi-stationary structure consisting of two northward and two southward maxima in latitude per solar rotation. The extent in latitude slowly increased from about 15 deg near the start of the interval to about 45 deg near the end. The magnetic field polarity (away from the sun or toward the sun) at the subterrestrial latitude on the source surface agreed with the interplanetary magnetic field polarity observed or inferred at the earth on 82 percent of the days. The interplanetary field structure observed at the earth at this time is finely tuned to the structure of low-latitude fields on the source surface.

Hoeksema, J. T.↗
NASA NTRS1989

The effects of magnetic nozzle configurations on plasma thrusters

Plasma thrusters have been operated at power levels from 10kW to 0.1MW. When these devices have had magnetic fields applied to them which form a nozzle configuration for the expanding plasma, they have shown marked increases in exhaust velocity which is in direct proportion to the magnitude of the applied field. Further, recent results have shown that electrode erosion may be influenced by applied magnetic fields. This research is directed to the experimental and computational study of the effects of applied magnetic field nozzles in the acceleration of plasma flows. Plasma source devices which eliminate the plasma interaction in normal thrusters are studied as most basic. Normal thruster configurations will be studied without applied fields and with applied magnetic nozzle fields. Unique computational studies will utilize existing codes which accurately include transport processes. Unique diagnostic studies will support the experimental studies to generate new data. Both computation and diagnostics will be combined to indicate the physical mechanisms and transport properties that are operative in order to allow scaling and accurate prediction of thruster performance.

York, Thomas M.↗
DOE OSTI2023

Second Target Station (STS) Project: PIONEER Technical Report

PIONEER is a time-of-flight single-crystal neutron diffractometer at the Second Target Station (STS), aiming at providing the world-leading capability to measure tiny crystals (~0.001 mm 3 , i.e., X-ray diffraction size), ultra-thin epitaxial films (~10 nm thicknesses), and weak structural transitions and complex magnetism. The instrument will take advantage of STS source characteristics and utilize advancements in neutron optics to largely reduce the sample-volume requirement for single-crystal neutron diffraction. PIONEER will have a high-flux mode with multiple beam size options to improve the signal-to-background ratio in various sample environments. It will also provide a high Q-resolution mode by limiting beam divergence to study periodically modulated structures with characteristic lengths no less than 100 Å. Furthermore, it supports half-polarized neutron diffraction for investigating complex magnetism and local susceptibility. This report first overviews the proposed science case and the derived requirement. And then, the chosen technical solutions and expected performance will be described.

36 MATERIALS SCIENCE↗
NASA NTRS1994

The enigmatic T Tauri radio source

We have analyzed eight high angular resolution images of the prototype low mass pre-main-sequence star T Tauri obtained with the Very Large Array between 1987 and 1990. Our objectives were to confirm a recent report that the radio emission is both variable and circularly polarized, to determine whether this behavior originates in the optical star or in the infrared source lying 0.6 sec to its south, and to identify possible emission mechanisms. No variability or circular polarization was detected in the weak (approximately equals 1 mJy) radio emission associated with the visible star, down to levels of approximately equals 10%. The observed flux can be accounted for by free-free emission from an ionized wind with a mass-loss rate M = 3.7 x 10(exp -8) solar mass yr(exp -1), but a more accurate determination of the spectral index is needed to test the validity of sperical wind models. In sharp contrast, the 3.6 cm emission of the infrared source is variable (approximately equals 4-7 mJy) on time scales less than or equal to 3 days and circularly polarized at low levels of approximately equals 3% - 5%. The polarization was left circular when detected during periods of low radio activity but changed to right circular during a radio outburst, similar to the reversals that have been seen in some RS CVn binary systems. The spectral index is negative during 'quiescence,'and we argue that the emission is nonthermal gyrosynchrotron radiation. The detection of magnetic radio activity in this optically invisible infrared source sparks new interest in clarifying its evolutionary status. Sensitive 3.6 cm images reveal weak emission extending approximately equals 1 sec west of the T Tau system that is probably associated with high-velocity shock-excited gas flowing toward HH-1555. We find no radio evidence for a putative third component north of the visible star.

Skinner, Stephen L.↗
DOE OSTI2020

The Material Plasma Exposure eXperiment: Mission and conceptual design

Mastering Plasma Material Interactions (PMI) is key for obtaining a high performance, high duty-cycle and safe operating fusion reactor. Numerous gaps exist in PMI which have to be addressed before a reactor can be built. In particular the lack of data at high ion fluence, fusion reactor divertor relevant plasma conditions and neutron displacement damage requires new experimental devices to be able to develop plasma facing materials and components. This has been recognized in the community and the U.S. fusion program is addressing this need with a new linear plasma device—the Material Plasma Exposure eXperiment (MPEX). MPEX will be a superconducting linear plasma device with magnetic fields of up to 2.5 T. The plasma source is a high-power helicon source (200 kW, 13.56 MHz). The electrons will be heated via Electron Bernstein Waves with microwaves using multiple 70 GHz gyrotrons (up to 600 kW in total). Ions will be heated via ion cyclotron heating in the so-called “magnetic beach heating” scheme in the frequency range of 6–9 MHz (up to 400 kW in total). An overview of the conceptual design and the project/design requirements is given in this paper.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2014

Observational Signatures of Magnetic Reconnection

Magnetic reconnection is often referred to as the primary source of energy release during solar flares. Directly observing reconnection occurring in the solar atmosphere, however, is not trivial considering that the scale size of the diffusion region is magnitudes smaller than the observational capabilities of current instrumentation, and coronal magnetic field measurements are not currently sufficient to capture the process. Therefore, predicting and studying observationally feasible signatures of the precursors and consequences of reconnection is necessary for guiding and verifying the simulations that dominate our understanding. I will present a set of such observations, particularly in connection with long-duration solar events, and compare them with recent simulations and theoretical predictions.

Savage, Sabrina↗
DOE OSTI2022

Preliminary Results from Magnetic Field Scanning System for a Single-Cell Niobium Cavity

One of the building blocks of modern particle accelerators is superconducting radiofrequency (SRF) cavities. Niobium is the material of choice to build such cavities, which operate at liquid helium temperature (2 - 4 K) and have some of the highest quality factors found in Nature. There are several sources of residual losses, one of them is trapped magnetic flux, which limits the quality factor in SRF cavities. The flux trapping mechanism depends on different niobium surface preparations and cool-down conditions. Suitable diagnostic tools are not yet available to study the effects of such conditions on magnetic flux trapping. A magnetic field scanning system (MFSS) for SRF cavities using Hall probes and Fluxgate magnetometer has been designed, built, and is commissioned to measure the local magnetic field trapped in 1.3 GHz single-cell SRF cavities at 4 K. In this contribution, we will present the preliminary results from MFSS for a single cell niobium cavity.

Ciovati, G.↗