Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MELTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Development of Bismuth and Platinum Bi-Metallic Nanoparticles to Enhance Melt Wire Temperature Resolution

Advanced manufacturing (AM) based on direct-write (DW) technologies has emerged as the predominant enabler for the fabrication of active and passive sensors to be deployed in harsh operating environments seen in a nuclear reactor. Recently, Idaho National Laboratory and Boise State University have recently established capabilities to incorporate advanced manufacturing (AM) methods to accelerate, modernize and enhance functionality of nuclear sensors and instrumentation to achieve the goal of enhancing the safety and efficiency of nuclear reactors. A significant thrust of this work includes the development of nuclear relevant feedstock materials compatible with a variety of direct-write processes for the development, fabrication and testing of AM sensors for peak temperature detection and neutron flux monitoring. For this report, bismuth and bismuth/platinum (BiPt) bi-metallic nanoparticles were synthesized using wet chemical approaches to develop bi-metallic feedstock materials to enhance the sensitivity of melt wires for peak temperature detection. Nanoparticle characterization was performed with Transmission Electron Microscopy (TEM) for nanoparticle composition and size, Transmission X-Ray Diffraction Fluorescence (TXRF) for nanoparticle composition, and Differential Scanning Calorimetry to elucidate the melting point of BiPt bi-metallic nanoparticles. Preliminary results indicate bi-metallic BiPt nanoparticles as a viable pathway for fabricating high resolution AM melt wires.

36 MATERIALS SCIENCE↗

Microstructure formation in partially melted zone during gas tungsten arc welding of AZ91 Mg cast alloy

During gas tungsten arc (GTA) welding of AZ91 Mg cast alloy, constitutional liquid forms locally in the original interdendritic regions in the partially melted zone (PMZ). The PMZ re-solidification behaviour has not been well understood. In this study, the gradual change of the re-solidification microstructure within PMZ from base metal side to weld metal side was characterised. High cooling rate experiments using Gleeble thermal simulator were also conducted to understand the morphological change of the {alpha}-Mg/{beta}-Mg{sub 17}Al{sub 12} phase interface formed during re-solidification after partial melting. It was found that the original partially divorced eutectic structure has become a more regular eutectic phase in most of the PMZ, although close to the fusion boundary the re-solidified eutectic is again a divorced one. Proceeding the eutectic re-solidification, if the degree of partial melting is sufficiently high, {alpha}-Mg re-solidified with a cellular growth, resulting in a serrated interface between {alpha}-Mg and {alpha}-Mg/{beta}-Mg{sub 17}Al{sub 12} in the weld sample and between {alpha}-Mg and {beta}-Mg{sub 17}Al{sub 12} (fully divorced eutectic) in Gleeble samples. The morphological changes affected by the peak temperature and cooling rate are also explained.

36 MATERIALS SCIENCE↗

Cold Crucible Induction Melting Technology for Vitrification of High Level Waste: Development and Status in India

Cold crucible induction melting is globally emerging as an alternative technology for the vitrification of high level radioactive waste. The new technology offers several advantages such as high temperature availability with long melter life, high waste loading, high specific capacity etc. Based on the laboratory and bench scale studies, an engineering scale cold crucible induction melter was locally developed in India. The melter was operated continuously to assess its performance. The electrical and thermal efficiencies were found to be in the range of 70-80 % and 10-20 % respectively. Glass melting capacities up to 200 kg m{sup -2} hr{sup -1} were accomplished using the ESCCIM. Industrially adaptable melter operating procedures for start-up, melting and pouring operations were established (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Melted Murataite Ceramics Containing Simulated Actinide/Rare Earth Fraction of High Level Waste

Murataite-based ceramics with three different chemical compositions containing simulated actinide/rare earth (RE) fraction of HLW were produced in a resistive furnace at a temperature of 1500 deg. C and two of them - in a cold crucible energized from a 5.28 MHz/10 kW high frequency generator. All the samples prepared in resistive furnace were composed of major murataite and minor perovskite, crichtonite, zirconolite, and pyrophanite/ilmenite. The samples produced in the cold crucible were composed of murataite, perovskite, crichtonite, and rutile. Higher content of perovskite and crichtonite in the cold crucible melted ceramic than in the ceramic with the same chemical composition but melted in resistive furnace may be due to higher temperature in the cold crucible (up to 1600-1650 deg. C) at which some fraction of murataite was subjected to decomposition yielding additional amount of perovskite and crichtonite. Method of melting may effect on elemental partitioning in the murataite-containing ceramics because light (Ce-group) REs enter preferably perovskite phase whereas Nd, Sm, and heavy (Y-group) REs are accommodated in the murataite polytypes. Thus, perovskite and murataite are major host phases for the Ce- and Y-group REs, respectively, whereas tetravalent actinides (U) enter murataite only.

36 MATERIALS SCIENCE↗

An Integrated Method for Accurate Determination of Melting in High-Pressure Laser Heating Experiments

We present an integrated approach for melting determination by monitoring several criteria simultaneously. In particular we combine x-ray diffraction observations with the detection of discontinuities in the optical properties by spectroradiometric measurements. This approach significantly increases the confidence of melt identification, especially with low-Z samples. We demonstrate the method with observations of melt in oxygen at 47 and 55 gigapascals.

36 MATERIALS SCIENCE↗

Melting Phase Transitions and Catalytic Activity of Bilayer Gold Nanoclusters

Recent experiments in oxidation catalysis indicate that bilayer gold nanostructures exhibit exceptional catalytic activity at ambient temperatures. Here we use molecular dynamics simulations to show that an unsupported bilayer gold nanocluster has a broad and mild second-order melting phase transition. The transition is characterized by an interplay between the intralayer and interlayer diffusion processes, and the transition temperature region ranges from about 300 K to 1200 K. We suggest that surface thermal instabilities of partially melted bilayer gold nanoclusters result in their exceptional catalytic activity at ambient temperatures. For gold nanoclusters with more than two layers, the melting transition temperature range narrows, and the activity of the cluster decreases due to the suppression of surface fluctuations. These results systematically explain experimental observations showing that catalytic ability of gold nanoclusters decreases with size.

36 MATERIALS SCIENCE↗

The surface quasiliquid melt acceleration and the role of thermodynamic phase in the thermal decomposition of crystalline organic explosives

We show that melt acceleration in the thermal decomposition of crystalline organic solids is a manifestation of the surface quasiliquid phase. We derive a single universal rate law for melt acceleration that is a simple function of the metastable liquid activity below the melting point, and has a zero order term proportional to the quasiliquid thickness. We argue that the underlying mechanisms of this model will provide a molecular definition for the stability of the class of secondary explosives.

36 MATERIALS SCIENCE↗

Imaging Field–Driven Melting of a Molecular Solid at the Atomic Scale

Solid–liquid phase transitions are basic physical processes, but atomically resolved microscopy has yet to capture their full dynamics. A new technique is developed for controlling the melting and freezing of self–assembled molecular structures on a graphene field–effect transistor (FET) that allows phase–transition behavior to be imaged using atomically resolved scanning tunneling microscopy. This is achieved by applying electric fields to 2,3,5,6–tetrafluoro–7,7,8,8–tetracyanoquinodimethane–decorated FETs to induce reversible transitions between molecular solid and liquid phases at the FET surface. Nonequilibrium melting dynamics are visualized by rapidly heating the graphene substrate with an electrical current and imaging the resulting evolution toward new 2D equilibrium states. An analytical model is developed that explains observed mixed–state phases based on spectroscopic measurement of solid and liquid molecular energy levels. The observed nonequilibrium melting dynamics are consistent with Monte Carlo simulations.

36 MATERIALS SCIENCE↗

Effect of melting processes on the structure and precipitation of a heavy rainstorm in Beijing

Abstract Beijing and its surrounding areas experienced a torrential rainstorm from July 21 to 22, 2012. Previous studies have shown that melting was the main rainwater source in this process. In this paper, melting conversion processes were set to zero (NPMLT test) to analyze the effect of microphysical processes on the structure and precipitation of the convective system. The results showed that without the melting processes, the wind shear at the 700 hPa level decreased, and the wind field in Beijing and its surrounding areas changed. The cold front system moved faster, and the rainfall amount only reached the low rain level, much lower than that during the actual rainstorm. The hydrometeors sources had apparently changed. Though the latent heat release was large and little latent heat absorption occurred in the NPMLT test, the net latent heat did not affect the development of the convective system, and the precipitation was low. Therefore, microphysical processes greatly influence precipitation and convective system.

Guo, Chunwei↗

Bis(Nitroxymethylisoxazolyl) Furoxan: A Promising Standalone Melt-Castable Explosive

The synthesis and crystal structure of the heterocyclic explosive bis(nitroxymethylisoxazolyl) furoxan, C 10 H 6 N 6 O 10 , are described. In addition, we report its physical properties and theoretical performance. This material was found to exhibit standalone melt-castable explosive properties, with a melting point of 89.8 °C and an onset decomposition temperature of 193.8 °C. Bis(nitroxymethylisoxazolyl) furoxan features an insensitive behavior to impact, friction, and electrostatic discharge, with a calculated detonation pressure about 25 % higher than the state-of-the-art melt-castable explosive TNT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of the Kinematic Viscosity of Melted Mixtures of Sodium, Lithium, and Beryllium Fluorides and the Effect of the Eutectic Additive Cerium Trifluoride on the Viscosity

Experimental data on the kinematic viscosity and liquidus temperature of certain fused mixtures of sodium, lithium, and beryllium fluorides were obtained, by the method of damping of torsional oscillations of a cylinder with the experimental melt, in validation of the concept of molten-salt incinerator reactors for incinerating transuranium elements from spent nuclear fuel from light-water reactors. The measurements were conducted from the liquidus temperature to 800°C. The effect of the addition of cerium trifluoride on the viscosity of the eutectic melt 58NaF–15LiF–27BeF{sub 2} was studied. It was shown that the additive appreciably reduces the viscosity at low temperature and also lowers the liquidus temperature. The parameters characterizing the temperature dependence of viscosity were determined for the experimental melts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ Raman Spectroscopic Investigation of Solvation in the Disperse System Li{sub 2}CO{sub 3}–Na{sub 2}CO{sub 3}–K{sub 2}CO{sub 3}-melt–MgO-nanopowder

Interparticle interactions in the high-temperature disperse system Li{sub 2}CO{sub 3}–Na{sub 2}CO{sub 3}–K{sub 2}CO{sub 3}-melt–MgO-nanopowder were studied using Raman spectroscopy to provide the in situ information required to optimize the carbonate-fuel-cell operating environment. Addition of MgO nanopowder to the carbonate melt changed the system vibrational spectrum because of solvation of solid particles by salt-melt ions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Thermodynamic characteristics of praseodymium in the gallium–aluminum eutectic melt

The Ga–Al eutectic melt saturated with praseodymium was studied in the temperature range 572–1076 K by electromotive force (emf) method relative to the reference electrode (In{sub L} + PrIn{sub 3}, where L is the liquid phase) in a LiCl–KCl–CsCl eutectic electrolyte. The partial molar thermodynamic functions (enthalpy, entropy, and Gibbs energy) of praseo dymium in a Ga–Al eutectic melt were calculated. According to the emf measurements of the two-phase Pr–Ga–Al{sub L} + intermetallic compound alloys equilibrated with the Ga–Al eutectic melt saturated with praseodymium, there are intermetallic compounds PrGa{sub 6}, PrGa{sub 4}, and Pr{sub 0.22}Ga{sub 0.78}(PrGa{sub 2}) in the temperature ranges 572–741, 741–883, and 883–1076 K, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Viscosity of Heterogeneous Silicate Melts: A Non-Newtonian Model

The recently published viscosity data of heterogeneous silicate melts with well-documented structure and experimental conditions are critically re-analyzed and tabulated. By using these data, a non-Newtonian viscosity model incorporating solid fraction, solid shape, and shear rate is proposed on the basis of the power-law equation. This model allows calculating the viscosity of the heterogeneous silicate melts with solid fraction up to 34 vol pct. The error between the calculated and measured data is evaluated to be 32 pct, which is acceptable considering the large error in viscosity measurement of the completely liquid silicate melt.

36 MATERIALS SCIENCE↗

Efficient Melt Stirring Induced by the Coupled Effects of Alternating Magnetic Field and Configuration of Cold Crucible

In the present study, the fluid flow in cold crucible and its effects on solute transport were numerically and experimentally investigated. It was found that the coupled effects of alternating magnetic fields and the configuration of cold crucible induce a vigorous three-dimensional melt flow. Further, solute transport results indicate that the three-dimensional flow contributes to more efficient melt stirring, and the stirring efficiency for obtaining uniform melt is improved by 77.5 pct compared with only meridional flow.

36 MATERIALS SCIENCE↗

Interactions of Alumina-Based and Magnesia-Based Refractories with Iron Melts and Slags: A Review

A novel flash ironmaking technology (FIT) based on the direct reduction of iron ore concentrate with a reductant gas (such as hydrogen, natural gas, coal gas, or a combination thereof) in a flash furnace is being developed at the University of Utah. This technology which is undergoing large-scale laboratory testing aims at overcoming the limitations of blast furnace ironmaking by bypassing the problematic pelletization/sintering and cokemaking steps.[1–5] Refractory selection is expected to play an important step in the development of FIT and its proposed scale-up. For nominating an appropriate refractory for the FIT, understanding the interactions of candidate refractories with iron/iron oxide and slags under H{sub 2}/CO/CO{sub 2}/H{sub 2}O environments is necessary. This work is undertaken to review the existing literature on the interactions of important refractories with iron melts and relevant slags with an emphasis on two of the most commonly used refractories in ironmaking and steelmaking applications: the alumina-based refractories (used widely in blast furnace operations) and the magnesia-based refractories (used extensively in primary as well as secondary steelmaking). First, a comprehensive review on the interactions of alumina-based refractories with iron melts and slags has been done. Next the existing literature on the interactions of magnesia-based refractories with iron melts and relevant slags has been reviewed. Summaries have been included after each section and sub-section along with comments and critical insights from the authors. Finally, in the concluding remarks the differences in operating conditions between existing iron and steelmaking practices and the novel FIT have been highlighted. On the basis of these differences, it has been argued that the results and conclusions available from previous studies on refractory–metal–slag interactions are of little significance to flash ironmaking. Thus, there exists a need to carry out laboratory experiments for evaluating refractory performance in flash ironmaking under conditions relevant to the current process (FIT).

36 MATERIALS SCIENCE↗

Effect of Turbulence Modeling on the Melt Flow and Inclusions Transport in a Steel Filtration Experiment

The current article deals with the effect of turbulence modeling on inclusions transport and melt flow in an induction crucible furnace (ICF), which was employed in order to investigate the efficiency and the performance of a ceramic filter. Furthermore, the influence of the discrete random-walk dispersion model on the behavior of inclusions in the ICF was investigated. Different turbulence models were employed in order to predict the turbulent melt flow. The numerical results show that the flow field is affected by the turbulence modeling method. Moreover, the distribution of the turbulent kinetic energy depends considerably on the choice of the turbulence model. In addition, the turbulence model and dispersion model also affect the inclusion transport in the melt. The filtration rate is also affected by the choice of the turbulence model.

36 MATERIALS SCIENCE↗

Viscosity of Heterogeneous Silicate Melts: A Review

The viscosity of solid phase containing heterogeneous silicate melts is discussed in this review. The crucial parameters characterizing silicate melt structure are first presented, i.e., volume fraction of solid particles, particle shape and size. The measurement and calculation methods of these parameters are summarized and the influence of the parameters on viscosity is discussed. Next, a theoretical description of rheological behavior in heterogeneous silicate melts is given, focusing on non-Newtonian characteristics, e.g., shear-dependence, time-dependence, and yield stress. The viscosity models which were proposed in the last half century are reviewed and critically assessed. This paper concludes with opportunities and suggestions for future work.

36 MATERIALS SCIENCE↗