Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MARTENSITE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Impact of Cryogenic Treatment on Mechanical Behavior and Microstructure of Ti-6Al-4V ELI Biomaterial

Ti-6Al-4V with its ELI variant is a potential biomaterial for structural implants. However, its poor resistance to plastic shearing results in poor tribological properties that hinders its widespread use in biomedical implants. Cryogenic treatment being an established technique for improving wear resistance and other mechanical properties of ferrous materials is applied on Ti-6Al-4V ELI alloy. To ensure comprehensive investigations, the widely studied microstructures of Ti-6Al-4V ELI, i.e., lamellar, martensite, two variants of bimodal and mill annealed are considered in this work. Deep cryogenic treatment at the soaking temperature (− 196 °C) for 24 h soaking time followed by tempering has been applied. The impact of cryogenic treatment has been assessed in terms of changes in the mechanical behavior including wear resistance, hardness, tensile properties and impact strength. The alterations in mechanical behavior due to cryogenic treatment are correlated with microstructure evolution. Cryogenic treatment has caused significant improvement in mechanical behavior of Ti-6Al-4V ELI alloy.

36 MATERIALS SCIENCE↗

Enhancement of Wear and Corrosion Resistance in Medium Carbon Steel by Plasma Electrolytic Nitriding and Polishing

The effect of plasma electrolytic polishing on the characteristics of medium carbon steel after anodic nitriding in a nitrate–chloride electrolyte was investigated. The structure, morphology, and phase composition of the layers were studied using an x-ray diffractometer and a metallographic microscope. Nitrided and polished specimens were tested under dry friction conditions with a counter-body made of bearing steel. Corrosion studies were performed using potentiodynamic polarization curves in 3% sodium chloride solution. Nitriding in a nitrate–chloride electrolyte was determined to increase the surface hardness up to 1040 HV due to the formation of a nitride–martensite layer with an outer oxide layer. After polishing of the nitrided surface, the loose outer part of the oxide layer containing microcracks and pores was removed. The reduction in the corrosion current density of 2.27 times of nitrided steel by plasma polishing without changing the structure of the diffusion layers was shown. The wear rate of the samples decreased from 560 μg/(N m) for untreated steel to 60 μg/(N m) as a result of nitriding and dropped to 8 μg/(N m) after plasma electrolytic polishing.

36 MATERIALS SCIENCE↗

Effect of Chromium Content on Microstructure, Hardness, and Wear Resistance of As-Cast Fe-Cr-B Alloy

The effects of chromium content on microstructure, hardness and wear resistance of as-cast Fe-xCr-1.0B (x = 0, 4, 8, 12, 16, 20) alloys were investigated by means of optical microscope (OM), scanning electron microscope (SEM), x-ray diffractometer (XRD), hardness tester and ring block wear tester. The results showed that the microstructures of chromium-free alloy were mainly composed of pearlite, ferrite, and eutectic borocarbides, and the hardness was very low, only 18.8 HRC. With the increase in chromium content, the matrix of as-cast Fe-Cr-B alloy gradually began to transform from pearlite and ferrite to lath martensite, and the type of borocarbides changed from Fe{sub 2}(B, C) to M{sub 2}(B, C), M{sub 7}(C, B){sub 3} and M{sub 23}(C, B){sub 6} (M = Fe, Cr). When the chromium content was 12 wt.%, the hardness of alloy reached the highest value of 61.1 HRC, and the wear resistance of alloy was the best. The results of worn surface analysis showed that the wear failure of as-cast Fe-Cr-B alloy was mainly caused by multiple plastic deformation and micro-cutting.

36 MATERIALS SCIENCE↗

Effect of Microstructure of X-120 Steel on CO{sub 2} Corrosion Inhibition by 2-Mercaptobenzimidazole

The use of 2-mercaptobenzimidazole (2MBI) as corrosion inhibitor for API X-120 pipeline with two different microstructures in a CO{sub 2}-saturated 3.5% NaCl solution has been investigated. One microstructure was predominantly martensitic and bainitic (steel A), whereas the second one was mainly ferritic (steel B). It was found that 2MBI behaved as a mixed type of corrosion inhibitor and it changed the corrosion-controlled mechanism. In the uninhibited solution, steel A had a dissolution rate higher than steel B. However, in the presence of inhibitor, dissolution rate for steel A was lower than that for B because the film-formed inhibitor is adsorbed in a better way for steel A which has smaller precipitates distributed in a more homogeneous way than that for steel B.

36 MATERIALS SCIENCE↗

Data Science Techniques, Assumptions, and Challenges in Alloy Clustering and Property Prediction

Data analytics methods have been increasingly applied to understanding materials chemistry, processing due to the manufacturing approach, and uni-axial and cyclic property relationships in the highly complex space of alloy design. There are several benefits to applying data analytics to this space, including the ability to manage non-linearities in the responses of the alloy attributes and the resulting mechanical properties. However, key difficulties in applying and understanding the results of data analytics include the often lack of reported assumptions and data processing steps necessary to improve interpretation and reproducibility in derived results. In this work, the methods used to generate clustering and correlation analyses for experimental 9% Cr ferritic-martensitic steel data were investigated and the resulting implications for mechanical property predictions were assessed. This work uses principal component analysis, partitioning around medoids, t-SNE, and k-means clustering to investigate trends in composition, processing and microstructure information with creep and tensile properties, building on work done previously using a smaller version of the same dataset. The initial assumptions, preprocessing steps and methods are investigated and outlined in order to depict the fine level of detail required to convey the steps taken to process data and produce analytical results. Here, the variations in the resulting analyses are explored due to the influence of new and more varied data.

36 MATERIALS SCIENCE↗

Residual Stress Modeling with Phase Transformation for Wire Arc Additive Manufacturing of B91 Steel

Wire arc additive manufacturing (WAAM) is an energy-efficient manufacturing technique used for near-net-shape production of functional industrial components. However, heat accumulation during deposition and the associated mechanical and metallurgical changes result in complex residual stress profiles across the cross section of the fabricated components. These residual stresses are detrimental to the service life of the components. In this study, sequentially coupled thermomechanical analysis of WAAM B91 steel is conducted to quantify the residual stress variation across the component. The thermomechanical analysis includes a transient heat transfer model and a static stress model that incorporates the transformation-induced plasticity due to martensitic phase transformation. Here, the experimentally calibrated heat transfer model mirrors the temperature variation of the system during the deposition. The results from the stress model are validated via x-ray diffraction measurements, and the numerical results are in good agreement with the experimental data.

20 FOSSIL-FUELED POWER PLANTS↗

An in-situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels

For multiphase advanced high-strength steels, the different mechanical behavior of constituent phases may lead to a non-uniform partitioning of stresses among different phases. In addition, the grain-orientation-dependent elastic/plastic anisotropy in each phase may cause the grain-to-grain interactions, which further modify further the microscopic load partitioning. In the current work, the micromechanical behavior of high-strength steels with multiple phases was characterized by using the in-situ high-energy X-ray diffraction (HEXRD) technique. For the investigated materials, the {200} lattice strains of the constituent phases (the ferrite, bainite, and martensite) with similar crystal structures were determined through separating their overlapped diffraction peaks and, then, examining the respective changes of peak positions during deformation. Based on those experimental data, the anisotropic elastic and plastic properties of the steels were simulated using a Self-Consistent (SC) model for predicting the grain-to-grain and phase-to-phase interactions. The constitutive laws for describing the elastic and plastic behavior of each constituent phase were directly obtained through comparing the predicted lattice- strain distributions with the measured ones. The transmission-electron-microscopy (TEM) observations of the microstructure developments of microstructures also verified the partitioning of plastic strains among different phases. The present investigations provide a good fundamental understanding of the micromechanical behavior, with an emphasis on the stress partitioning of soft and hard phases, and different work-hardening rates, of the studied steels during tensile loading.

36 MATERIALS SCIENCE↗

Alpha – omega and omega – alpha phase transformations in zirconium under hydrostatic pressure: A 3D mesoscale study

Here, a three dimensional (3D) elastoplastic phase-field model is developed for modeling the hydrostatic pressure-induced alpha – omega phase transformation and the reverse phase transformation, i.e. omega – alpha, in zirconium (Zr). Plastic deformation and strain hardening of the material are also considered in the model. The microstructure evolution during both phase transformations is studied. The transformation start pressures at different temperatures are predicted and are plotted as a phase diagram. The effect of phase transformations on the mechanical properties of the material is also studied. The input data corresponding to pure Zr are acquired from experimental studies as well as by using the CALPHAD method. Our simulations show that three different omega variants form as laths. On release of pressure, reverse phase transformation initiates at lath boundaries. We observe that both phase transformations are martensitic in nature and also occur at the same pressure, i.e. little hysteresis. The transformation start pressures and the kinetics of the transformation predicted by our model are in good agreement with experimental results.

36 MATERIALS SCIENCE↗

An origin of functional fatigue of shape memory alloys

Functional fatigue (FF) during thermal and mechanical cycling, which leads to the generation of macroscopic irrecoverable strain and the loss of dimensional stability, is a critical issue that limits the service life of shape memory alloys (SMAs). Although it has been demonstrated experimentally that such a phenomenon is related to microstructural changes, a fundamental understanding of the physical origin of FF is still lacking, especially from a crystallographic point of view. In this study, we show that in addition to the normal martensitic phase transformation pathway (PTP), there is a symmetry-dictated non-phase-transformation pathway (SDNPTP) during phase transformation cycling, whose activation could play a key role in leading to FF. By investigating crystal symmetry changes along both the PTPs and SDNPTPs, the characteristic types of defects (e.g., dislocations and grain boundaries) generated during transformation cycling can be predicted systematically, and agree well with those observed experimentally in NiTi. By analyzing key materials parameters that could suppress the SDNPTPs, strategies to develop high performance SMAs with much improved FF resistance through crystallographic design and transformation pathway engineering are suggested.

36 MATERIALS SCIENCE↗

Effects of composition and crystallographic ordering on the ferromagnetic transition in Ni–Co–Mn–In magnetic shape memory alloys

In the present study, the effects of composition and the level of crystallographic ordering were studied in Ni 45 Co 5 Mn 50-X In X magnetic shape memory alloys with X = 13.55, 13.71 and 13.92, in order to reveal the relationship between the Curie temperature (T C ) of the austenite phase and the degree of L2 1 ordering. Various samples were prepared using secondary heat treatments at different temperatures below the order-disorder transition temperature and for different durations, after solution heat treatment, in order to control the degree of ordering. T C s were determined using calorimetric and magnetometry measurements. The relationship between the T C and the degree of order was used to predict the evolution of the order during selected heat treatments. It was shown that the T C of austenite exhibits a monotonous non-linear dependence on the fraction of the L2 1 phase. This relationship was corroborated via ab initio numerical calculations within a mean field approximation. Dependence of the crystallographic order parameter on temperature and duration of secondary heat treatments showed that ordering kinetics is fast, the total degree of order depends only on the annealing temperature and cooling rate for long enough treatments, and maximum achievable degree of order is limited by the low thermal energy available for atomic diffusion at low temperatures. Lastly, small changes in composition were observed to have a significant impact on martensitic transformation temperatures, and a significant but smaller effect on the ferromagnetic transition in these systems.

36 MATERIALS SCIENCE↗

Deformation mechanisms and ductile fracture characteristics of a friction stir processed transformative high entropy alloy

Deformation mechanisms of a friction stir processed Fe 40 Mn 20 Co 20 Cr 15 Si 5 transformative high entropy alloy using three different process parameters were studied to explain the microstructural dependence of tensile response in these specimens. The relative strain hardening contribution due to transformation and twinning effects was different for the three different microstructural conditions and thus resulted in different magnitude of work hardening. Crystal plasticity simulations confirmed that synergistic activity of face centered cubic and hexagonal close packed slip and twin mechanisms resulted in sustained work hardening and enhanced uniform elongation. The non-uniform ductility and extent of void nucleation and growth in these specimens were limited. Nevertheless, fractography and X-ray microscopy of fractured tensile specimens verified that microstructural flexibility induced different propensities for void growth and ductile fracture mode. Thus, alloy design induced phase stability, adaptive phase evolution due to friction stir processing, extent and kinetics of martensitic transformation and related work hardening capability of the individual phases combined together to determine the overall tensile response. The crystallographic orientation dependence of deformation induced phase transformation was also thoroughly studied. Finally, this study included quantitative determination of the crystallographic orientation where resolved shear stress on leading and trailing partial dislocations favored separation of the partials to cause transformation at a critical value of applied stress.

36 MATERIALS SCIENCE↗

Large room-temperature elastocaloric effect in a bulk polycrystalline Ni-Ti-Cu-Co alloy with low isothermal stress hysteresis

Creation of high-performance advanced elastocaloric materials is essential for the execution of elastocaloric refrigeration that can be an environment-friendly and high-efficiency substitute for the widely used traditional vapor-compression cooling technology. Here we have developed a bulk polycrystalline Ni-Ti-Cu-Co shape memory alloy exhibiting large elastocaloric effect, low stress hysteresis and room temperature working temperature, all of which are of great importance to and urgently demanded for high-efficiency room-temperature elastocaloric refrigeration. This newly developed (Ni 42.5 Ti 50 Cu 7.5 ) 99 Co 1 alloy shows a large room-temperature elastocaloric effect with directly measured adiabatic temperature change up to -14.4 K during unloading. The stress hysteresis of the isothermal superelastic stress-strain curve is as low as 60 MPa when the maximum tensile strain is 2.7%. Owing to the large elastocaloric effect and low stress hysteresis, a very high coefficient of performance up to 19 is achieved on the material level. This newly developed (Ni 42.5 Ti 50 Cu 7.5 ) 99 Co 1 alloy is a robust candidate for efficient elastocaloric refrigeration. Advanced in-situ synchrotron high-energy X-ray diffraction technique was employed to reveal the phase transformation sequence and to accurately determine the crystal structure of different phases, based on which the lattice compatibility between the transforming phases was evaluated and the phase transformation strain was predicted, providing in-depth fundamental understanding of the martensitic transformation in this newly developed alloy. This work could be useful for designing high-performance elastocaloric materials for solid-state cooling applications.

36 MATERIALS SCIENCE↗

Towards synthetic L 1 0 -FeNi: Detecting the absence of cubic symmetry in Laser-Ablated Fe-Ni nanoparticles

The L 1 0 crystal structure underlines an important class of chemically ordered alloys that exhibits uniaxial magnetocrystalline anisotropy. The near-equiatomic L 1 0 -FeNi extracted from meteorites has demonstrated intriguing magnetic properties for permanent magnet applications. However, the synthesis of this chemically ordered non-cubic structure has been a longstanding challenge. Here, in this work, we demonstrate the absence of cubic symmetry in near-equiatomic Fe-Ni nanoparticles synthesized by picosecond-pulsed laser ablation in liquids. The non-cubic phase detected in these particles can only be L 1 0 -FeNi or hexagonal close-packed (HCP) FeNi, and the absence of cubic symmetry was unequivocal. The orientation relationship between the non-cubic phase and the adjacent cubic phase was characterized by a series of transmission electron microscopy (TEM) techniques, which consistently suggests that the formation of the non-cubic phase involves a martensitic transformation process.

36 MATERIALS SCIENCE↗

Effect of thermal treatments on electrochemical behavior of binder jetted 17-4 PH stainless steel

Binder jetted 17–4 PH stainless steel was post-processed to relate heat treatment, microstructure, and corrosion in 3.5 wt% NaCl. Specimens were sintered at 1380 or 1400 °C, solution-annealed at 1055 °C for 1 h, and aged at 482 °C for 1 h. Here, as-sintered parts showed α′-martensitic matrix with a δ-ferrite network and Cu-rich precipitates in ferrite; inclusions (MnS, NbC) promoted localized attack. solutionizing redistributed elements and reduced ferrite, while aging generated coherent Cu nano-precipitates. Corrosion resistance was highly sensitive to post-processing in which aged specimens exhibited the lowest corrosion current density and formed a thicker, stable Cr 2 O 3 -rich passive film, whereas sintered specimens degraded most. Pitting potential depended on sintering temperature and microstructure, with 1400 °C sintering yielding more positive pitting potentials and the best overall performance after aging. Although the 1400-solutionized condition showed a relatively noble pitting response versus 1380-solutionized, it displayed unstable corrosion kinetics attributed to an imperfect passive film linked to higher NbC density. XPS depth profiles corroborated these trends, showing thicker, more continuous Cr 2 O 3 in aged states and discontinuous/thinning oxides in less resistant conditions. Practically, high-temperature sintering (∼1400 °C) followed by solutionizing and aging is recommended, with further gains expected from reducing NbC/MnS populations and porosity via powder and process control.

36 MATERIALS SCIENCE↗

Effect of solutes on the lattice parameters and elastic stiffness coefficients of body-centered tetragonal Fe

In this study, we compute changes in the lattice parameters and elastic stiffness coefficients C ij of body-centered tetragonal (bct) Fe due to Al, B, C, Cu, Mn, Si, and N solutes. Solute strain misfit tensors determine changes in the lattice parameters as well as strain contributions to the changes in the C ij . We also compute chemical contributions to the changes in the C ij , and show that the sum of the strain and chemical contributions agree with more computationally expensive direct calculations that simultaneously incorporate both contributions. Octahedral interstitial solutes, with C being the most important addition in steels, must be present to stabilize the bct phase over the body-centered cubic phase. We therefore compute the effects of interactions between interstitial C solutes and substitutional solutes on the bct lattice parameters and C ij for all possible solute configurations in the dilute limit, and thermally average the results to obtain effective changes in properties due to each solute. Finally, the computed data can be used to estimate solute-induced changes in mechanical properties such as strength and ductility, and can be directly incorporated into mesoscale simulations of multiphase steels to model solute effects on the bct martensite phase.

36 MATERIALS SCIENCE↗

High performance Nb/TiNi nanocomposites produced by packaged accumulative roll bonding

Taking full advantage of intrinsic high strength of nano-reinforcements has been proven difficult in a composite until the concept of strain matching was experimental verified in a nanowire Nb/TiNi in-situ composite, which was obtained via solidifying eutectic Nb/TiNi and subsequent severe wire drawing. However, the volume fraction of the nano-reinforcement was dictated by eutectic reaction, which severely limited the development of high-performance composites. Here, the martensitic transformation nanocomposites were successfully acquired with increased volume fraction and changeable morphology of the nano-reinforcement through hot packaged ARB (PARB) and subsequent wire drawing. The nano-reinforcement with lamellar configuration in the composite could exhibit a large lattice strain of similar to 3.8%, which demonstrated the applicability and effectiveness of the strain matching principle in nano-lamellar composite. The obtained composites show a yield strength over 2.0 GPa and a quasi-linear elastic strain as larger as similar to 6.5% with adjustable apparent elastic modulus from 30 to 50 GPa.

42 ENGINEERING↗

Radiological analysis and transmutation calculation of representative castable nanostructured alloys

In this work, radiological analysis regarding the waste management was performed on two current reduced-activation ferritic-martensitic (RAFM) steels Eurofer 97 and F82H and two castable nanostructured alloys (CNAs) CNA1 and CNA3 using the European DEMO first wall spectrum. CNA1 and CNA3 are a new generation of RAFM steels, which have increased amounts of nanoscale carbonitrides and carbides precipitates, respectively, via small composition modifications. Furthermore, the increased nitrogen in CNA1 leads to higher activity at ≥50 years, and thus to the disposal concern under the current NRC regulation. However, the calculation using Fetter’s evaluation leads to reduced waste disposal rating (WDR) of down to 0.25 depending on the damage dose from ~0.05 wt percent nitrogen in CNA1, and thus less concern on the waste disposal. Contact dose rate after 10 years from the first wall replacement primarily depends on the initial Co and Nb impurity levels. Other added elements, such as V and Si in CNA1 and Ti and Mn in CNA3, do not have significant effect on the specific activity, contact dose rate, or decay heat. Composition limits of CNAs are given based on the shallow burial disposal and materials recycling. In addition, composition evolution of typical precipitates in the CNAs was calculated using the DEMO first wall and the HFIR spectra. Larger transmutation-induced composition evolution occurs in the V/Ta-rich carbonitrides in CNA1 than that in the Ti-rich carbides in CNA3.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗