Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETRONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Thin-film transistors based on p-type Cu{sub 2}O thin films produced at room temperature

Copper oxide (Cu{sub 2}O) thin films were used to produce bottom gate p-type transparent thin-film transistors (TFTs). Cu{sub 2}O was deposited by reactive rf magnetron sputtering at room temperature and the films exhibit a polycrystalline structure with a strongest orientation along (111) plane. The TFTs exhibit improved electrical performance such as a field-effect mobility of 3.9 cm{sup 2}/V s and an on/off ratio of 2x10{sup 2}.

36 MATERIALS SCIENCE↗

Physical and chemical characterization of combinatorial metal gate electrode Ta-C-N library film

This paper reports comprehensive structural and chemical analyses for the combinatorial Ta-C-N/HfO{sub 2} system, crucial data for understanding the electrical properties of Ta-C-N/HfO{sub 2}. Combinatorial Ta-C-N 'library' (composition spread) films were deposited by magnetron sputtering. Electron probe wavelength dispersive spectroscopy and x-ray fluorescence-yield near-edge spectroscopy were used to quantitatively determine the composition across these films. Scanning x-ray microdiffractometry determined that a solid solution of Ta(C,N){sub x} forms and extends to compositions (0.3<=Ta<=0.5 and 0.57<=Ta<=0.67) that were previously unknown. The thermal stability of the Ta-C-N/HfO{sub 2} library was studied using high resolution transmission electron microscopy, which shows Ta-C-N/HfO{sub 2}/SiO{sub 2}/Si exhibiting good thermal stability up to 950 deg. C.

36 MATERIALS SCIENCE↗

p-type conduction in sputtered indium oxide films

We report p-type conductivity in intrinsic indium oxide (IO) films deposited by magnetron sputtering on fused quartz substrates under oxygen-rich ambient. Highly oriented (111) films were studied by x-ray diffraction, optical absorption, and Hall effect measurements. We fabricated p-n homojunctions on these films.

36 MATERIALS SCIENCE↗

Room temperature ferromagnetism in pristine MgO thin films

Robust ferromagnetic ordering at, and well above room temperature is observed in pure transparent MgO thin films (<170 nm thick) deposited by three different techniques. Careful study of the wide scan x-ray photoelectron spectroscopy rule out the possible presence of any magnetic contaminants. In the magnetron sputtered films, we observe magnetic phase transitions as a function of film thickness. The maximum saturation magnetization of 5.7 emu/cm{sup 3} is measured on a 170 nm thick film. The films above 500 nm are found to be diamagnetic. Ab initio calculations suggest that the ferromagnetism is mediated by cation vacancies.

36 MATERIALS SCIENCE↗

Large three-photon absorption in Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} films studied using Z-scan technique

Large picosecond nonlinearities in Ba{sub 0.5}Sr{sub 0.5}TiO{sub 3} thin films, grown at different temperatures in situ on (100) MgO substrates using rf magnetron sputtering technique, were studied using the Z-scan technique. The nonlinear absorption mechanism, studied near 800 nm using approx2 and 25 ps pulses, switched from reverse saturable absorption type in the films deposited at temperature<600 deg. C to three-photon absorption (3PA) in the films deposited at temperature>600 deg. C. The magnitude of the 3PA coefficient was estimated to be approx10{sup -21} cm{sup 3}/W{sup 2}. Two-photon absorption (2PA) was the dominant mechanism recorded with approx6 ns pulses. The observed behavior is correlated with morphological and crystallographic texture of the films. The linear refractive index and optical band gap of the films have also been calculated and these show a strong dependence on the substrate temperature.

36 MATERIALS SCIENCE↗

The New ESRF Multilayer Facility: Progress and Perspectives

In view of the increasing need for high quality multilayer based x-ray optics the ESRF decided to upgrade its multilayer facility. During the last years a new deposition system was designed, installed, and commissioned. Since 2008 the new laboratory is operational and has produced its first optical elements for ESRF beamlines. The deposition system is based on magnetron sputtering and can cover optical surfaces up to 1000x150 mm{sup 2} with uniform or graded coatings. Four cathodes allow the use of conducting, insulating, and ferromagnetic target materials. This work will provide an overview on the machine conception and its overall performance, including a comparison with the formerly used system. It will be complemented by first fabrication results and perspectives for future projects in the framework of the ESRF Upgrade Programme.

43 PARTICLE ACCELERATORS↗

Single-layer mirrors for advanced research light sources

X-ray mirrors are needed for beam guidance, beam alignment and monochromatisation at third-generation synchrotron light sources (PETRA III) and forthcoming Free-Electron Lasers (LCLS, European XFEL). Amorphous carbon coatings are currently used as total reflection mirrors at FLASH to guide the photon beam to the various beamlines. These coatings were prepared by means of magnetron sputtering. The new GKSS sputtering facility for the deposition of single and multilayer mirrors with a length of up to 1500 mm and a width of up to 120 mm is in operation. In this contribution we present the results of this new deposition system. A major advantage is that it is now possible to prepare one, two or more mirrors with similar properties over the whole deposition length. The mirror properties were investigated by means of X-ray reflectometry and interference microscopy. The performance of the mirrors is analyzed, considering X-ray reflectivity, film thickness and surface roughness. The uniformity of these properties over the whole deposition length of 1500 mm is demonstrated. The results obtained will be discussed and compared with former results.

43 PARTICLE ACCELERATORS↗

The Role of Ge Wetting Layer and Ge Islands in Si MSM Photodetectors

In this work, Ge thin films were deposited on silicon substrates by radio frequency magnetron sputtering to form Ge islands from Ge layer on Si substrate during post-growth rapid thermal annealing (RTA). The size of the islands decreases from 0.6 to 0.1 as the rapid thermal annealing time increases from 30 s to 60 s at 900 deg. C. Not only that the annealing produces Ge islands but also wetting layer. Energy Dispersive X-ray Spectroscopy (EDX) and Scanning Electron Microscopy (SEM) were employed for structural analysis of Ge islands. Metal-Semiconductor-Metal photodetectors (MSM PDs) were fabricated on Ge islands (and wetting layer)/Si. The Ge islands and wetting layer between the contacts of the fabricated devices are etched in order to see their effects on the device. The performance of the Ge islands MSM-PD was evaluated by dark and photo current-voltage (I-V) measurements at room temperature (RT). It was found that the device with island and wetting layer significantly enhance the current gain (ratio of photo current to dark current) of the device.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study of Fe-Co Nanocomposite Films

Moessbauer study of nanogranular ferromagnetic FeCo films is presented. Two ways of production of nanocomposite systems were employed: (i) hollow cathode plasma jet deposition process, and (ii) laser ablation from Fe-Co metallic targets by means of a KrF excimer laser and r.f. magnetron sputtering. Complementary information on the composition of the samples were obtained by nuclear magnetic resonance of {sup 57}Fe and {sup 59}Co nuclei, conversion electron Moessbauer spectroscopy, and high resolution transmission electron microscopy. The films contain crystalline nanoparticles, 5-20 nm in size, embedded in an amorphous matrix.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization of a linear device developed for research on advanced plasma imaging and dynamics

Within the scope of long term research on imaging diagnostics for steady-state plasmas and understanding of edge plasma physics through diagnostics with conventional spectroscopic methods, we have constructed a linear electron cyclotron resonance (ECR) plasma device named Research on Advanced Plasma Imaging and Dynamics (RAPID). It has a variety of axial magnetic field profiles provided by eight water-cooled magnetic coils and two dc power supplies. The positions of the magnetic coils are freely adjustable along the axial direction and the power supplies can be operated with many combinations of electrical wiring to the coils. Here, a 6 kW 2.45 GHz magnetron is used to produce steady-state hydrogen, helium, and argon plasmas with central magnetic fields of 875 and/or 437.5 G (second harmonic). In order to achieve the highest possible plasma performance within the limited input parameters, wall conditioning experiments were carried out. Chamber bake-out was achieved with heating coils that were wound covering the vessel, and long-pulse electron cyclotron heating discharge cleaning was also followed after 4 days of bake-out. A uniform bake-out temperature (150 deg. C) was achieved by wrapping the vessel in high temperature thermal insulation textile and by controlling the heating coil current using a digital control system. The partial pressure changes were observed using a residual gas analyzer, and a total system pressure of 5x10{sup -8} Torr was finally reached. Diagnostic systems including a millimeter-wave interferometer, a high resolution survey spectrometer, a Langmuir probe, and an ultrasoft x-ray detector were used to provide the evidence that the plasma performance was improved as we desired. In this work, we present characterization of the RAPID device for various system conditions and configurations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Effect of annealing and Nd concentration on the photoluminescence of Nd{sup 3+} ions coupled with silicon nanoparticles

We report on the microstructure and photoluminescence (PL) properties of Nd-doped SiO{sub 2} thin films containing silicon nanoparticles (Si-np) as a function of the annealing temperature and the Nd concentration. The thin films, which were grown on Si substrates by reactive magnetron co-sputtering, contain the same Si excess. Fourier transform infrared (FTIR) spectra show that a phase separation occurs during the annealing due to the agglomeration of the Si excess resulting in the formation of Si-np. Besides, after annealing, the films exhibit PL from excitonic states confined in Si-np. We showed that the intensity of the PL of Nd{sup 3+} ions that occurs at {approx}0.92, 1.06, and 1.4 {mu}m is maximal at low Nd concentration and while well-passivated Si-np are formed. FTIR and x-ray measurements showed that the increase in the Nd incorporation has detrimental effects on the PL of Nd{sup 3+} because of the formation of Nd{sub 2}O{sub 3} nanocrystals and inherent disorder in the SiO{sub 2} host matrix. PL excitation measurements demonstrate that the PL of Nd{sup 3+} ions is nonresonant and follows the excitation of Si-np giving new evidence of the energy transfer from Si-np toward the rare earth ions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of structure and magnetoresistance in Co/ZnO films

Co/ZnO films were deposited on glass substrates by magnetron sputtering at room temperature. The structure of the as-deposited films is studied by means of x-ray diffraction, x-ray photoelectron spectroscopy, and the zero-field-cooled and field-cooled magnetization curves. It is shown that the as-deposited samples consist of a mixture of regions of metallic Co and semiconducting ZnO. Large negative magnetoresistance of 26% and 11.9% are observed in the as-deposited Co/ZnO film with Co concentration of 50.7 at. % at 10 K and room temperature, respectively. Structural analysis, the temperature dependence of the conductivity and magnetoresistance reveal that the magnetoresistance is induced by spin-dependent tunneling between regions of conducting magnetic Co through the ZnO semiconducting barriers. The enhanced magnetoresistance in the low temperature regime may be related to the existence of higher-order tunneling processes between large Co regions mediated by small Co particles.

36 MATERIALS SCIENCE↗

Investigation of emitting centers in SiO{sub 2} codoped with silicon nanoclusters and Er{sup 3+} ions by cathodoluminescence technique

This study reports on the investigation and characterization of the different emitting centers within SiO{sub 2} codoped by Er{sup 3+} ions and silicon-excess. Erbium doped silicon-rich silicon oxide (SRSO:Er) thin films, fabricated by magnetron cosputtering at 500 deg. C, were analyzed by means of cathodoluminescence. The CL spectra of SRSO, Er-doped SiO{sub 2} and SRSO:Er were recorded and compared for various annealing temperatures. It was found that some specific optically-active point-defects called silicon-oxygen-deficient centers (SiODCs) are present in all kinds of samples. In the layers containing some excess Si, the phase separation between Si nanoclusters (Si-ncs) and SiO{sub 2} is observed when the annealing temperature reaches and exceeds 900 deg. C. The formation of Si-nc increases with annealing at the expense of SiODCs that was assumed to act as seeds for the growth of Si-nc. For SRSO:Er samples, the contribution of SiODCs overlaps that due to Er{sup 3+} transitions in the visible range. The emissions from SiODCs are drastically reduced when an SRSO sample is doped with Er ions, whereas the Er emissions in the visible range start to be distinctly observed. We propose a scenario of energy transfer from SiODCs toward the Er ions, especially as the emissions from the Si-based entities (SiODCs, Si-nc) and from some transitions of Er ions are located in a same visible broad range.

36 MATERIALS SCIENCE↗

Suppression of superconductivity in epitaxial NbN ultrathin films

This paper studies the suppression of superconducting transition temperature (T{sub c}) of ultrathin NbN film. We fabricated epitaxial NbN superconducting thin films of thicknesses ranging from 2.5 to 100 nm on single crystal MgO (100) substrates by dc magnetron sputtering. We performed structure analyses and measured their electric and far infrared properties. The experimental results were compared with several mechanisms of the suppression of superconductivity proposed in the literature, including the weak localization effect, the proximity effect, and quantum size effect (electron wave leakage model). We found that the electron wave leakage model matches best to the experimental data.

36 MATERIALS SCIENCE↗

High permittivity Bi{sub 24}Fe{sub 2}O{sub 39} thin films prepared by a low temperature process

High permittivity Bi{sub 24}Fe{sub 2}O{sub 39} (BFO) thin films have been deposited on platinized silicon substrates by a low temperature process combining rf magnetron sputtering at room temperature and postdeposition annealing at 450 deg. C. A nearly pure tetragonal crystal structure with highly (201)-preferred orientation, determined by x-ray diffraction, was formed in the BFO thin film. The BFO film not only exhibits high dielectric permittivity ({epsilon}{sub r}=113) and relatively low loss tangent (tan {delta}=0.012), but also shows a fairly small quadratic voltage coefficient of capacitance ({alpha}{approx}800 ppm/V{sup 2}) and a small temperature coefficient of capacitance ({alpha}{sub T{approx}}790 ppm/deg. C). Moreover, the leakage current density, obeying the Fowler-Nordheim tunneling mechanism, remains at a reasonably low level with the increase in applied electric field (J{approx}10{sup -6}-10{sup -4} A/cm{sup 2} under E=400 kV/cm). These attractive dielectric and electrical properties make the low temperature processed Bi{sub 24}Fe{sub 2}O{sub 39} thin film a promising candidate for high-k dielectric applications in silicon-based integrated circuits.

36 MATERIALS SCIENCE↗

Correspondence Between Magnetoresistance and Magnetization in Co/Cu Multilayers Studied at Higher Spacer Layer Thickness

A series of [Cu(t{sub Cu})/Co(25 A)]{sub 25} multilayers at higher spacer layer thickness have been deposited by dc magnetron sputtering. Magnetoresistance (MR) measurements have been carried out at different temperatures. MR curves showed hysteresis by displaying peaks at magnetic field H{sub p}. The field values exhibiting the maximum resistance in the magnetoresistance curve (H{sub p}) were greater than the coercivity (H{sub c}). The correspondence between the shape of the MR curve and that of the magnetization curve has been established and observed peak splitting in MR curves is attributed to a hardening in the magnetization reversal of some magnetic grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ion irradiation effects on the exchange bias in IrMn/Co films

The present work reports on the influence of ion irradiation in exchange-coupled bilayers. Magnetron-sputtered IrMn{sub 4}/Co films were irradiated with 40 keV He{sup +} ions and the dependence of their magnetic properties was studied as function of ion fluence and current used during the irradiations. The effects of ion damage and electronic excitation were also studied through additional irradiations with H{sup +} and Ne{sup +} ions. The results show a clear dependence of the exchange-bias field on the defects caused by the ion bombardment. No correlations with other irradiation effects were observed.

36 MATERIALS SCIENCE↗

Soft magnetic properties of (Ni{sub 80}Fe{sub 20}){sub 1-x}(Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x} films for high frequency applications

A series of (Ni{sub 80}Fe{sub 20}){sub 1-x}(Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x} films were fabricated on Si substrates by means of radio frequency magnetron sputtering and the electrical and magnetic properties were studied. Optimal films with the desired properties of low coercivity H{sub c} {approx} 4 Oe, high saturation magnetization 4{pi}Ms {approx} 14.5 kG, and high electrical resistivity {rho} {approx} 1500 {mu}{Omega} cm were obtained. The permeability spectra measured shows that its natural ferromagnetic resonant frequency was about 3.4 GHz. The tested results shown that the sputtering power had an important effect on the films properties and that it can be convenient to adjust the natural ferromagnetic resonant frequency of the films.

36 MATERIALS SCIENCE↗