Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LINE DEFECTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Probing the defect state of individual precipitates grown in an Al-Mg-Si alloy

Precipitates forming in decomposable aluminum alloys such as Al-Mg-Si evolve toward the corresponding intermetallic phase, which is {beta} (Mg{sub 2}Si) in this case, depending on heat-treatment conditions. Individual {beta} precipitates were produced in an Al-1.11 at. % Mg-0.77 at. % Si alloy and identified using optical as well as electron microscopy. The individual {beta} precipitates could be investigated with regard to their intrinsic crystal defects using a finely focused positron microbeam provided by the Bonn Positron Microprobe. Comparison with theoretical calculations of the Doppler broadening of annihilation radiation reveals that {beta} precipitates most likely do not contain vacancies in either sublattice and that 0.16 is the upper bound of the fraction of trapped positrons. The usage of different enhancement factors had only little influence on the calculations whereas the general gradient approximation affected the contribution of Si orbitals, in particular. Additional measurements of the Doppler broadening based on the radioactive source {sup 68}Ge, which emits high-energy positrons probing bulk regions of the sample, were carried out. These measurements show that {beta} precipitates are sparsely distributed in the Al matrix.

36 MATERIALS SCIENCE↗

Core energies of dislocations in bcc metals

Accurate methods and an efficient workflow for computing and documenting dislocation core energies are developed and applied to 1 2 ( 111 ) and ( 100 ) dislocations in five body-centered cubic (bcc) metals W, Ta, V, Mo, and α -Fe represented by 13 model interatomic potentials. For each dislocation type, dislocation core energies are extracted for a large number of dislocation characters thoroughly sampling the entire 2-space of crystallographic line orientations of the bcc lattice. Of particular interest, core energies of the 1 2 ( 111 ) { 110 } dislocations are found to be distinctly asymmetric with respect to the sign of the character angle, whereas core energies of ( 100 ) { 110 } junction dislocations exhibit marked cusps for line orientations vicinal to the closed-packed ( 111 ) directions. Overall, our findings furnish substantial insights for developing accurate models of dislocation core energies employed in mesoscale dislocation dynamics simulations of crystal plasticity.

36 MATERIALS SCIENCE↗

Detached Growth of Germanium and Germaniumsilicon

Up to now, detached growth was observed mainly under microgravity, i.e. under the absence of hydrostatic pressure that hinders the formation of a free melt meniscus. the detached growth of germanium doped with gallium was obtained under 1 g conditions, the growth was performed in quartz-glass ampoule. Part of the crystal grew without wall contact, the detached growth was observed in-situ with a CCD-camera as well as after the growth process in form of growth lines and the formation of <111> facets on the crystal surface. GeSi crystal (oriientation: <111>, maximum silicon content: 4 at%, seed material: Ge) was grown in a pBN crucible (excluding the possibility of in-situ monitoring of the growth process). The grown crystal exhibits three growth facets, indicating also wall free growth. Surface analysis of the crystals (NDIC, SEM) and characterization of crystal segregation (EDAX, resistivity measurement) and defect structure (EPD, x-ray diffraction measurements) will be presented.

Dold, P.↗

The influence of V-defects, leakage, and random alloy fluctuations on the carrier transport in red InGaN MQW LEDs

Red InGaN-based light-emitting diodes (LEDs) exhibit lower internal quantum efficiencies than violet, blue, and green InGaN LEDs due to a reduction in radiative recombination rates relative to non-radiative recombination rates as the Indium composition increases. Additionally, the larger polarization and band offset barriers between high indium content InGaN quantum wells and GaN quantum barriers increase the forward voltage. In blue and green LEDs, random alloy fluctuations and V-defects play a key role in reducing the forward voltage. When V-defects are present, either naturally or intentionally introduced, they create an alternative path for carrier injection into the MQWs through the V-defect sidewalls. This injection mechanism explains the turn-on voltages of green LEDs. However, in InGaN red LEDs, these two phenomena do not reduce the forward voltage as effectively as in blue and green LEDs, and consequently, the computed forward voltage remains significantly higher than the measured one. Furthermore, currents are observed at low voltages before the turn-on voltage (V<ℏω/e=2.0 V) of red LEDs. To address this, we introduce dislocation-induced tail states in the modeling, suggesting that leakage current through these states may play a significant role both below and at turn-on voltages. The simulation also indicates that leakage carriers below turn-on accumulate, partially diffuse in the QWs, screen the polarization-induced barrier in the low injection regime, and further reduce the forward voltage. Despite these beneficial effects, a drawback of dislocation-induced tail states is the enhanced nonradiative recombination in the dislocation line region. This study provides a detailed analysis of device injection physics in InGaN QW red LEDs and outlines potential optimization strategies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Increased negatively charged nitrogen-vacancy centers in fluorinated diamond

We investigated the effect of fluorine-terminated diamond surface on the charged state of shallow nitrogen vacancy defect centers (NVs). Fluorination is achieved with CF{sub 4} plasma, and the surface chemistry is confirmed with x-ray photoemission spectroscopy. Photoluminescence of these ensemble NVs reveals that fluorine-treated surfaces lead to a higher and more stable negatively charged nitrogen vacancy (NV{sup −}) population than oxygen-terminated surfaces. NV{sup −} population is estimated by the ratio of negative to neutral charged NV zero-phonon lines. Surface chemistry control of NV{sup −} density is an important step towards improving the optical and spin properties of NVs for quantum information processing and magnetic sensing.

36 MATERIALS SCIENCE↗

Stereoscopic detection of hot spots in superfluid 4 He (He II) for accelerator-cavity diagnosis

Superconducting radio-frequency (SRF) cavities cooled by superfluid 4He (He II) are building blocks of many modern particle accelerators due to their high quality factor. However, Joule heating from sub-millimeter surface defects on cavities can lead to cavity quenching, which limits the maximum acceleration gradient of the accelerators. Developing a non-contacting detection technology to accurately locate these surface hot spots is the key to improve the performance of SRF cavities and hence the accelerators. In a recent proof-of-concept experiment, we demonstrated that a molecular tagging velocimetry (MTV) technique based on the tracking of a He molecular tracer line created nearby a surface hot spot in He II can be utilized to locate the hot spot. In order to make this technique practically useful, here we describe our further development of a stereoscopic MTV setup for tracking the tracer line’s motion in three-dimensional (3D) space. We simulate a quench spot by applying a transient voltage pulse to a small heater mounted on a substrate plate. Images of the drifted tracer line, taken with two cameras from orthogonal directions, are used to reconstruct the line profile in 3D space. Here, a new algorithm for analyzing the 3D line profile is developed, which incorporates the finite size effect of the heater. We show that the center location of the heater can be reproduced on the substrate surface with an uncertainty of only a few hundred microns, thereby proving the practicability of this method.

43 PARTICLE ACCELERATORS↗

Impacts of electrode coating irregularities on polymer electrolyte membrane fuel cell lifetime using quasi in-situ infrared thermography and accelerated stress testing

In-line quality control diagnostics for roll-to-roll (R2R) manufacturing techniques will play a key role in the future commercialization of the polymer electrolyte membrane fuel cell (PEMFC) used in automotive applications. These diagnostics monitor the fabrication of the membrane electrode assembly (MEA), which detect and flag any non-uniformity that may potentially harm PEMFC performance and/or lifetime. This will require quantitative thresholds and a clear distinction between harmful defects and harmless coating irregularities. Thus, novel fuel cell hardware with quasi in-situ infrared (IR) thermography capabilities is utilized to understand how bare spots in the cathode electrode impact MEA lifetime. An accelerated stress test (AST) simulates chemical and mechanical degradation modes seen in vehicular operation. The actual open circuit voltage and rate of change of this voltage are used as in-situ indicators for MEA failure, enabling capture of the progression of failure point development. Bare spot coating irregularities located at the center of the electrode were found to have no impact on MEA lifetime when compared to a pristine MEA. However, MEA lifetime was found to be considerably shortened when these same irregularities are located at the cathode inlet and, especially, the anode inlet regions of the fuel cell.

36 MATERIALS SCIENCE↗

Technologies and Operations for High Voltage Corona Detection with UAVs

Autonomous UAV transmission line inspection served as a reference mission for NASA demonstration of UAV deployment for economic benefit; this paper reports corona sensing advances in development of that reference mission. Unmanned aerial vehicles can serve as a platform for autonomous sensing and location of high voltage coronal discharge. Simple processing of commercial corona camera imagery can automate discharge localization and documentation. Inexpensive ultraviolet point sensors can sense discharge when carried close to the defect with a UAV. Augmented with a parabolic mirror, point sensor range can be increased to a safe inspection standoff distance, at the cost of a narrowed field of view. Results from a test flight of an augmented UV sensor are described. The imaging approach is superior in sensitivity and acquisition time, while the point sensor approach has superior size, weight, cost and durability advantages.

Moore, Andrew J.↗

Depth-dependent ordering, two-length-scale phenomena, and crossover behavior in a crystal featuring a skin layer with defects

Structural defects in a crystal are responsible for the ''two-length-scale'' behavior in which a sharp central peak is superimposed over a broad peak in critical diffuse x-ray scattering. We have previously measured the scaling behavior of the central peak by scattering from a near-surface region of a V{sub 2}H crystal, which has a first-order transition in the bulk. As the temperature is lowered toward the critical temperature, a crossover in critical behavior is seen, with the temperature range nearest to the critical point being characterized by mean-field exponents. Near the transition, a small two-phase coexistence region is observed. The values of transition and crossover temperatures decay with depth. An explanation of these experimental results is here proposed by means of a theory in which edge dislocations in the near-surface region occur in walls oriented in the two directions normal to the surface. The strain caused by the dislocation lines causes the ordering in the crystal to occur as growth of roughly cylindrically shaped regions. After the regions have reached a certain size, the crossover in the critical behavior occurs, and mean-field behavior prevails. At a still lower temperature, the rest of the material between the cylindrical regions orders via a weak first-order transition.

36 MATERIALS SCIENCE↗

High-resolution neutron diffraction study of microstructural changes in nanocrystalline ball-milled niobium carbide NbC{sub 0.93}

High resolution neutron diffraction was applied for elucidating of the microstructural evolution of nanocrystalline niobium carbide NbC{sub 0.93} powders subjected to high-energy ball milling. The diffraction patterns were collected with the high resolution Fourier diffractometer HRFD by using the reverse time-of-flight (RTOF) mode of data acquisition. The traditional single diffraction line analysis, the Rietveld method and more advanced Whole Powder Pattern Modeling technique were applied for the data analysis. The comparison of these techniques was performed. It is established that short-time milling produces a non-uniform powder, in which two distinct fractions with differing microstructure can be identified. Part of the material is in fact milled efficiently, with a reduction in grain size, an increase in the quantity of defects, and a corresponding tendency to decarburize reaching a composition NbC{sub 0.80} after 15 h of milling. The rest of the powder is less efficiently processed and preserves its composition and lower defect content. Larger milling times should have homogenized the system by increasing the efficiently milled fraction, but the material is unable to reach a uniform and homogeneous state. It is definitely shown that RTOF neutron diffraction patterns can provide the very accurate data for microstructure analysis of nanocrystalline powders. - Highlights: • The NbC{sub 0.93} powder was processed by high-energy ball milling. • The microstrain and dislocation density increase with milling time increase. • The corresponding decrease in crystallite size with milling time was observed. • The material exhibits the presence of two fractions after ball milling. • The RTOF neutron diffraction data are suitable for accurate microstructure analysis.

36 MATERIALS SCIENCE↗

LINE-IMAGING ORVIS MEASUREMENTS OF INTERFEROMETRIC WINDOWS UNDER QUASI-ISENTROPIC COMPRESSION

A line-imaging optically recording velocity interferometer system (ORVIS) has been implemented on the Veloce pulsed power generator to enable measurement of spatially resolved velocity histories of materials under dynamic compression. Interferometric windows are regularly used to maintain the high-pressure state of shock and ramp (quasi-isentropic) loaded materials. Although imaging through a shock or fast ramp (<=10 ns) loaded window material has been reasonably successful, for slower ramp loading (approx440 ns) experiments, the elastic-plastic yielding of the window has an adverse effect on return light to the line-imaging ORVIS. The results of quasi-isentropic loading experiments with various interferometric windows such as LiF, PMMA, NaCl, quartz and sapphire are presented.

36 MATERIALS SCIENCE↗

Investigation of combinatorial coevaporated thin film Cu{sub 2}ZnSnS{sub 4}. I. Temperature effect, crystalline phases, morphology, and photoluminescence

Cu{sub 2}ZnSnS{sub 4} is a promising low-cost, nontoxic, earth-abundant absorber material for thin-film solar cell applications. In this study, combinatorial coevaporation was used to synthesize individual thin-film samples spanning a wide range of compositions at low (325 °C) and high (475 °C) temperatures. Film composition, grain morphology, crystalline-phase and photo-excitation information have been characterized by x-ray fluorescence, scanning electron microscopy, x-ray diffraction, Raman spectroscopy, and photoluminescence imaging and mapping. Highly textured columnar grain morphology is observed for film compositions along the ZnS-Cu{sub 2}ZnSnS{sub 4}-Cu{sub 2}SnS{sub 3} tie line in the quasi-ternary Cu{sub 2}S-ZnS-SnS{sub 2} phase system, and this effect is attributed to structural similarity between the Cu{sub 2}ZnSnS{sub 4}, Cu{sub 2}SnS{sub 3}, and ZnS crystalline phases. At 475 °C growth temperature, Sn-S phases cannot condense because of their high vapor pressures. As a result, regions that received excess Sn flux during growth produced compositions falling along the ZnS-Cu{sub 2}ZnSnS{sub 4}-Cu{sub 2}SnS{sub 3} tie line. Room-temperature photoluminescence imaging reveals a strong correlation for these samples between film composition and photoluminescence intensity, where film regions with Cu/Sn ratios greater than ∼2 show strong photoluminescence intensity, in comparison with much weaker photoluminescence in regions that received excess Sn flux during growth or subsequent processing. The observed photoluminescence quenching in regions that received excess Sn flux is attributed to the effects of Sn-related native point defects in Cu{sub 2}ZnSnS{sub 4} on non-radiative recombination processes. Implications for processing and performance of Cu{sub 2}ZnSnS{sub 4} solar cells are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Automated identification and indexing of dislocations in crystal interfaces

Here, we present a computational method for identifying partial and interfacial dislocations in atomistic models of crystals with defects. Our automated algorithm is based on a discrete Burgers circuit integral over the elastic displacement field and is not limited to specific lattices or dislocation types. Dislocations in grain boundaries and other interfaces are identified by mapping atomic bonds from the dislocated interface to an ideal template configuration of the coherent interface to reveal incompatible displacements induced by dislocations and to determine their Burgers vectors. Additionally, the algorithm generates a continuous line representation of each dislocation segment in the crystal and also identifies dislocation junctions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Band alignment and chemical bonding at the GaAs/Al{sub 2}O{sub 3} interface: A hybrid functional study

The band alignment at the interface between GaAs and amorphous Al{sub 2}O{sub 3} is studied through the use of hybrid functionals. For the oxide component, a disordered model is generated through density-functional molecular dynamics. The achieved structure shows good agreement with the experimental characterization. The potential line-up across the interface is obtained for two atomistic GaAs/Al{sub 2}O{sub 3} interface models, which differ by the GaAs substrate termination. The calculated valence band offset amounts to 3.9 eV for an interface characterized by the occurrence of Ga–O bonds as dominant chemical bonding, favoring the high-energy side in the range of experimental values (2.6–3.8 eV). The effect of As antisite and As–As dimer defects on the band alignment is shown to be negligible.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Thermal Fluctuations of Spin Density Wave Order Parameter on the Quasiparticle Spectral Function

The two-dimensional model of itinerant electrons coupled to an antiferromagnetic order parameter is considered. In the mean-field solution the Fermi surface undergoes reconstruction and breaks into disconnected 'pockets'. We have studied the effect of the thermal fluctuations of the order parameter on the spectral density in such system. These fluctuations lead to a finite width of the spectral line scaling linearly with temperature. Due to the thermal fluctuations the quasiparticle spectral weight is transferred into a magnetic Brillouin zone. This can be interpreted as restoration of 'arcs' of the noninteracting Fermi surface.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Expression of the highly conserved vaccinia virus E6 protein is required for virion morphogenesis

The vaccinia virus E6R gene (VACVWR062) is conserved in all members of the poxvirus family and encodes a protein associated with the mature virion. We confirmed this association and provided evidence for an internal location. An inducible mutant that conditionally expresses E6 was constructed. In the absence of inducer, plaque formation and virus production were severely inhibited in several cell lines, whereas some replication occurred in others. This difference could be due to variation in the stringency of repression, since we could not isolate a stable deletion mutant even in the more 'permissive' cells. Under non-permissive conditions, viral late proteins were synthesized but processing of core proteins was inefficient, indicative of an assembly block. Transmission electron microscopy of sections of cells infected with the mutant in the absence of inducer revealed morphogenetic defects with crescents and empty immature virions adjacent to dense inclusions of viroplasm. Mature virions were infrequent and cores appeared to have lucent centers.

60 APPLIED LIFE SCIENCES↗

Recharging behavior of nitrogen-centers in ZnO

Electron Paramagnetic Resonance was used to study N{sub 2}-centers in ZnO, which show a 5-line spectrum described by the hyperfine interaction of two nitrogen nuclei (nuclear spin I = 1, 99.6% abundance). The recharging of this center exhibits two steps, a weak onset at about 1.4 eV and a strongly increasing signal for photon energies above 1.9 eV. The latter energy coincides with the recharging energy of N{sub O} centers (substitutional nitrogen atoms on oxygen sites). The results indicate that the N{sub 2}-centers are deep level defects and therefore not suitable to cause significant hole-conductivity at room temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗