Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “LEVEL WIDTHS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Dissociative recombination of the ground state of N2(+)

Large-scale calculations of the dissociative recombination cross sections and rates for the v = 0 level of the N2(+) ground state are reported, and the important role played by vibrationally excited Rydberg states lying both below and above the v = 0 level of the ion is demonstrated. The large-scale electronic wave function calculations were done using triple zeta plus polarization nuclear-centered-valence Gaussian basis sets. The electronic widths were obtained using smaller wave functions, and the cross sections were calculated on the basis of the multichannel quantum defect theory. The DR rate is calculated at 1.6 x 10 to the -7th x (Te/300) to the -0.37 cu cm/sec for Te in the range of 100 to 1000 K, and is found to be in excellent agreement with prior microwave afterglow experiments but in disagreement with recent merged beam results. It is inferred that the dominant mechanism for DR imparts sufficient energy to the product atoms to allow for escape from the Martian atmosphere.

Guberman, Steven L.↗

Are the Band Width Synthesis delay and delay rate observables useful for VLBI imaging?

The Band Width Synthesis (BWS) delay and delay rate observables measured by VLBI are used in astrometry to determine positions of extragalactic radio sources with a precision of 0.001 arcsec. At this level of precision, extragalactic radio sources exhibit extended structures that induce significant effects in the measured BWS delays and delay rates. The question whether closure BWS delays and delay rates could supplement the amplitudes and closure phases for VLBI imaging is studied. Preliminary results for the radio source NRAO140 observed in July 1983 are presented.

Charlot, P.↗

The efficiency of photovoltaic cells exposed to pulsed laser light

Future space missions may use laser power beaming systems with a free electron laser (FEL) to transmit light to a photovoltaic array receiver. To investigate the efficiency of solar cells with pulsed laser light, several types of GaAs, Si, CuInSe2, and GaSb cells were tested with the simulated pulse format of the induction and radio frequency (RF) FEL. The induction pulse format was simulated with an 800-watt average power copper vapor laser and the RF format with a frequency-doubled mode-locked Nd:YAG laser. Averaged current vs bias voltage measurements for each cell were taken at various optical power levels and the efficiency measured at the maximum power point. Experimental results show that the conversion efficiency for the cells tested is highly dependent on cell minority carrier lifetime, the width and frequency of the pulses, load impedance, and the average incident power. Three main effects were found to decrease the efficiency of solar cells exposed to simulated FEL illumination: cell series resistance, LC 'ringing', and output inductance. Improvements in efficiency were achieved by modifying the frequency response of the cell to match the spectral energy content of the laser pulse with external passive components.

Lowe, R. A.↗

Fabrication of Pop-up Detector Arrays on Si Wafers

High sensitivity is a basic requirement for a new generation of thermal detectors. To meet the requirement, close-packed, two-dimensional silicon detector arrays have been developed in NASA Goddard Space Flight Center. The goal of the task is to fabricate detector arrays configured with thermal detectors such as infrared bolometers and x-ray calorimeters to use in space fliGht missions. This paper focuses on the fabrication and the mechanical testing of detector arrays in a 0.2 mm pixel size, the smallest pop-up detectors being developed so far. These array structures, nicknamed "PUDS" for "Pop-Up Detectors", are fabricated on I pm thick, single-crystal, silicon membranes. Their designs have been refined so we can utilize the flexibility of thin silicon films by actually folding the silicon membranes to 90 degrees in order to obtain close-packed two-dimensional arrays. The PUD elements consist of a detector platform and two legs for mechanical support while also serving as electrical and thermal paths. Torsion bars and cantilevers connecting the detector platform to the legs provide additional flexures for strain relief. Using micro-electromechanical structure (MEMS) fabrication techniques, including photolithography, anisotropic chemical etching, reactive-ion etching, and laser dicing, we have fabricated PLTD detector arrays of fourteen designs with a variation of four parameters including cantilever length, torsion bar length and width, and leg length. Folding tests were conducted to test mechanical stress distribution for the array structures. We obtained folding yields and selected optimum design parameters to reach minimal stress levels. Computer simulation was also employed to verify mechanical behaviors of PUDs in the folding process. In addition, scanning electron microscopy was utilized to examine the flatness of detectors and the alignment of detector pixels in arrays. The fabrication of thermistors and heaters on the pop-up detectors is under way, preparing us for the next step of the experiment, the thermal test.

Li, Mary J.↗

Overview of the High Performance Antiproton (HiPAT) Experiment

The annihilation of matter with antimatter represents the highest energy density of any known reaction, producing 10(exp 8) MJ/g, approximately 10 orders of magnitude more energy per unit mass than chemical based combustion. To take the first step towards using this energy for propulsion applications the NASA MSFC Propulsion Research Center (PRC) has initiated a research activity examining the storage of low energy antiprotons. Storage was identified as a key enabling technology since it builds the experience base necessary to understand the handling of antiprotons for virtually all utilization and high-density storage concepts. To address this need, a device referred to as the High Performance Antiproton Trap (HiPAT) is under development at the NASA MSFC PRC. The HiPAT is an electromagnetic system (Penning-Malmberg design) consisting of a 4 Tesla superconductor, a high voltage confinement electrode system (operation up to 20 KV), and an ultra high vacuum test section (operating in the 10(exp -12) torr range). The system was designed to be portable with an ultimate goal of maintaining 10(exp 12) charged particles with a half-life of 18 days. Currently, this system is being experimentally evaluated using normal matter ions which are cheap to produce and relatively easy to handle. These normal ions provide a good indication of overall trap behavior, with the exception of assessing annihilation losses. The ions are produced external to HiPAT using two hydrogen ion sources, with adjustable beam energy and current. Ion are transported in a beam line and controlled through the use of electrostatic optics. These optics serve to both focus and gate the incoming ions, providing microsecond-timed pulses that are dynamically captured by cycling the HiPAT electric containment field like a 'trap door'. The layout of this system more closely simulates the operations expected at an actual antiproton production facility where 'packets' of antiprotons with pulse widths measured in 100's of nanoseconds could be provided. Initial dynamic capture experiments have been performed with both trap and ton source system functioning at approximately 10% of maximum levels, minimizing the potential for extraneous effects. Dynamic trapping techniques demonstrated the successful capture of millions of hydrogen ions with good agreement with the predicted loading based on the timing sequence, trap electric field, and ion beam current. These techniques will be expanded to examine multiple shot capture or 'stacking' to increase the total number of ions stored within HiPAT.

Martin, James J.↗

Slip Analysis in a Ni-base Superalloy

A Ni-base superalloy single crystal with Gamma/Gamma' structure was tested at room temperature along the , <110> and <111> directions. Consistent with previously reported investigations, this alloy did not obey the Schmid law and the CRSS (critical resolved shear stress) was noticeably lower for the <111>-oriented samples. Furthermore, the strain hardening rate decreased and the degree of deformation localization increased in the order of <111>, and <110> orientations. The appearance and orientation of deformation traces were found to depend on the loading orientation as well as the amount of strain. In general, when Gamma'-particles were sheared, the traces followed the expected octahedral shear planes. It is demonstrated that the wavy deformation traces that do not follow the {111} planes are associated with changes in the gamma-channels width and the falling off of the gamma-particles. In this paper the evolution of deformation bands are discussed in terms of plastic localization at microscopic, mesoscopic and macroscopic levels.

Westbrooke, Eboni F.↗

System and method for laser-based, non-evaporative repair of damage sites in the surfaces of fused silica optics

A method for repairing a damage site on a surface of an optical material is disclosed. The method may involve focusing an Infrared (IR) laser beam having a predetermined wavelength, with a predetermined beam power, to a predetermined full width ("F/W") 1/e.sup.2 diameter spot on the damage site. The focused IR laser beam is maintained on the damage site for a predetermined exposure period corresponding to a predetermined acceptable level of downstream intensification. The focused IR laser beam heats the damage site to a predetermined peak temperature, which melts and reflows material at the damage site of the optical material to create a mitigated site.

36 MATERIALS SCIENCE↗

Mitigating Structural Defects in Droop-Minimizing InGaN/GaN Quantum Well Heterostructures

Modern commercial InGaN/GaN blue LEDs continue to suffer from efficiency droop, a reduction in efficiency with increasing drive current. External quantum efficiency (EQE) typically peaks at low drive currents (< 10 A cm 2 ) and drops monotonically at higher current densities, falling to <85% of the peak EQE at a drive current of 100 A cm 2 . Mitigating droop-related losses will yield tremendous gains in both luminous efficacy (lumens/W) and cost (lumens/$). Such improvements are critical for continued large-scale market penetration of LED technologies, particularly in high-power and high flux per unit area applications. However, device structures that reduce droop typically require higher indium content and are accompanied by a corresponding degradation in material quality which negates the droop improvement via enhanced Shockley-Read-Hall (SRH) recombination. In this work, we use advanced characterization techniques to identify and classify structural defects in InGaN/GaN quantum well (QW) heterostructures that share features with low-droop designs. Using aberration-corrected scanning transmission electron microscopy (C s -STEM), we find the presence of severe well width fluctuations (WWFs) in a number of low droop device architectures. However, the presence of WWFs does not correlate strongly with external quantum efficiency nor defect densities measured via deep level optical spectroscopy (DLOS). Hence, performance losses in the heterostructures of interest are likely dominated by nanoscale point or interfacial defects rather than large-scale extended defects.

36 MATERIALS SCIENCE↗

KMOS{sup 3D} Reveals Low-level Star Formation Activity in Massive Quiescent Galaxies at 0.7 < z < 2.7

We explore the H α emission in the massive quiescent galaxies observed by the KMOS{sup 3D} survey at 0.7 < z < 2.7. The H α line is robustly detected in 20 out of 120 UVJ -selected quiescent galaxies, and we classify the emission mechanism using the H α line width and the [N ii]/H α line ratio. We find that AGNs are likely to be responsible for the line emission in more than half of the cases. We also find robust evidence for star formation activity in nine quiescent galaxies, which we explore in detail. The H α kinematics reveal rotating disks in five of the nine galaxies. The dust-corrected H α star formation rates are low (0.2–7 M {sub ⊙} yr{sup −1}), and place these systems significantly below the main sequence. The 24 μ m-based, infrared luminosities, instead, overestimate the star formation rates. These galaxies present a lower gas-phase metallicity compared to star-forming objects with similar stellar mass, and many of them have close companions. We therefore conclude that the low-level star formation activity in these nine quiescent galaxies is likely to be fueled by inflowing gas or minor mergers, and could be a sign of rejuvenation events.

79 ASTRONOMY AND ASTROPHYSICS↗

Domain pinning near a single-grain boundary in tetragonal and rhombohedral lead zirconate titanate films

The interaction of grain boundaries with ferroelectric domain walls strongly influences the extrinsic contribution to piezoelectric activity in Pb(Zr,Ti)O 3 (PZT), ubiquitous in modern transducers and actuators. However, the fundamental understanding of these phenomena has been limited by complex mechanisms originating from the interplay of atomic-level domain wall pinning, collective domain wall dynamics, and emergent mesoscopic behavior. This contribution utilizes engineered grain boundaries created by depositing epitaxial PZT films with various Zr:Ti ratio onto 24º SrTiO 3 tilt bicrystals. The nonlinear piezoelectric response and surface domain structure across the boundary are investigated using piezoresponse force microscopy whilst cross section domain structure is studied using transmission electron microscopy. The grain boundary reduces domain wall motion over a width of 800±70 nm for PZT 45:55 and 450±30 nm for PZT 52:48. Phase field modeling provides an understanding of the elastic and electric fields associated with the grain boundary and local domain configurations. In conclusion, this study demonstrates that complex mesoscopic behaviors can be explored to complement atomic-level pictures of the material system.

36 MATERIALS SCIENCE↗

Flattened and broadband mid-infrared super-continuum generation in As{sub 2}Se{sub 3} based holey fiber

By using an As{sub 2}Se{sub 3} based holey fiber (HF) with a normal flat dispersion profiles, a flattened and broadband mid-infrared super-continuum generation is analysed. The transmission of an ultra-short pulse in the HF is numerically simulated by solving the generalized nonlinear Schrödinger equation under various parameters. The simulation results show that, by launching a pulse with a width of 50 fs and a peak power of 4.25 kW at 4375 nm into the 6 mm-long HF, a flat and broadband super-continuum at 3 dB level is successfully generated. The super-continuum covers the wavelengths from 3866 to 5958 nm which is the largest flat bandwidth reported in such a short fiber.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Landau level splitting in nitrogen-seeded epitaxial graphene

We present a new form of semiconducting graphene grown on C-face silicon carbide, SiC(0001), seeded with a sub-monolayer of nitrogen. This graphene exhibits a gap of 0.3-0.7 eV from the Fermi level to the valence band dependent on lm thickness as measured via angle resolved photo-emission spectroscopy (ARPES). Scanning tunneling microscopy (STM) images imply that the bandgap may be the result of strain-induced confinement. STM indicates that much of the graphene consists of wide at hexagonal plateaus, 8-20 nm2 on average, surrounded by both smooth and disordered folds of length scales from 0.5-2 nm tall, 1-4 nm thick, and 1-20 nm long. The remainder of the surface is covered in smooth or disordered ripples and folds intermixed. Scanning tunneling spectroscopy (STS) measurements on all features show peaks suggestive of Landau levels, and have been analyzed to give pseudo-magnetic field magnitudes. The magnetic lengths associated with these fields are less than the average plateau diameter but comparable to typical fold widths. We consider a growth process whereby the graphene grows pinned to the substrate by the interface nitrogen. The graphene experiences compressive strain as a result of both this pinning as well as competing thermal expansion forces between the substrate and lm. As a result, graphene on nitrogen-seeded SiC has a more concentrated network of strained ripples and folds than seen on C-face SiC graphene without nitrogen.

36 MATERIALS SCIENCE↗

An improved numerical method to compute neutron/gamma deexcitation cascades starting from a high spin state

Numerous nuclear processes involve the deexcitation of a compound nucleus through the emission of several neutrons, gamma-rays and/or conversion electrons. The characteristics of such a deexcitation are commonly derived from a total statistical framework often called “Hauser–Feshbach” method. In this work, we highlight a numerical limitation of this kind of method in the case of the deexcitation of a high spin initial state. To circumvent this issue, an improved technique called the Fluctuating Structure Properties (FSP) method is presented. Two FSP algorithms are derived and benchmarked on the calculation of the total radiative width for a thermal neutron capture on 238 U. We compare the standard method with these FSP algorithms for the prediction of particle multiplicities in the deexcitation of a high spin level of 143 Ba. The gamma multiplicity turns out to be very sensitive to the numerical method. The bias between the two techniques can reach 1.5 γγ/cascade. Lastly, the uncertainty of these calculations coming from the lack of knowledge on nuclear structure is estimated via the FSP method.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

A conformal heat-drying direct ink writing 3D printing for high-performance lithium-ion batteries

High areal capacity electrodes hold great potential for high-energy density lithium-ion batteries (LIBs), but their poor electrochemical kinetics limit their power density. Here, in this study, high areal capacity 3D-structured LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathodes (4.3 mAh cm -2 ) are prepared via 3D printing with a manner of direct ink writing. The electrodes had an enlarged electrode–electrolyte contact area, shortened diffusion pathway, and reduced intercalation-induced stress, thereby delivering enhanced rate capability and cyclability in LIBs, which is 143.6 mAh g -1 at 3C and a 60.2 % capacity retention over 800 cycles at 1C. Moreover, at electrode level, the 3D-NMC exhibits an energy and power densities of 313.1 Wh kg -1 and 657.9 W kg -1 , respectively. Furthermore, the theoretical calculation suggests that reducing the gap width will be highly beneficial to the energy and power densities. This work establishes a milestone in understanding the cycling effect on the electrode local structure, including the void area and the LiNi 0.8 Mn 0.1 Co 0.1 O 2 region, which confirms the effectiveness of 3D printing for electrode preparation.

25 ENERGY STORAGE↗

Disorder induced interface states and their influence on the Al/Ge nanowires Schottky devices

It has been demonstrated that the presence of oxide monolayers in semiconductor surfaces alters the electronic potential at surfaces and, consequently, can drastically affect the electronic transport features of a practical device such as a field effect transistor. In this work experimental and theoretical approaches to characterize Al/germanium nanowire Schottky devices by using samples covered with a thin oxide layer (2 nm width) were explored. It was also demonstrated that the oxide layer on Ge causes a weak dependence of the metal work function on Schottky barrier heights indicating the presence of Fermi level pinning. From theoretical calculations the pinning factor S was estimated to range between 0.52 and 0.89, indicating a weak Fermi level pinning which is induced by the presence of charge localization at all nanowires' surface coming from interface states.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interatomic interactions and thermally induced shifts and broadenings of energy levels of atoms in circular Rydberg states

Analytical expressions are obtained for the constants determining the energy of the long-range (at large distances exceeding the LeRoy radius R{sub LR} ≈ 4n{sup 2}) polarisation interaction of the multipole electric moments of two atoms in identical Rydberg states with large principal (n) and maximum orbital (l) and magnetic (m) quantum numbers (|m| = l = n − 1). Asymptotic expansions in powers of n are found for the components of the van der Waals interaction tensor, which determine the dependence of the dispersion energy on the orientation of the interatomic axis. The spontaneous and thermally induced broadenings of the energy levels of circular states are represented analytically as functions of the principal quantum number and temperature. It is found that analytical formulae for the sum of spontaneous and thermally induced line widths in the region of high temperatures and large principal quantum numbers (assuming n{sup 3}k{sub B}T >> 1) do not contain a temperature-independent contribution of the spontaneous part of the broadening. Closed analytical expressions are also obtained for the Farley − Wing function and for the n- and T-dependent corrections to the asymptotic behaviour of the thermally induced shift. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High energy particle production from proton synchrotron radiation in strong magnetic fields in relativistic quantum field theory

We investigate photon, pion, and 𝜌-meson production from proton synchrotron radiation in the presence of strong magnetic fields. The proton decay widths and the luminosities of the emitted particles are calculated within a relativistic quantum framework that incorporates Landau quantization. A scaling rule is derived for the transition probability between different Landau levels. This allows an evaluation of transitions for extremely high Landau numbers exceeding 10 15 . Furthermore, we calculate the momentum distribution of the emitted particles by properly including the proton recoil effect associated with particle emission. The results differ significantly from conventional semiclassical approaches.

Cosmic ray sources↗

On-shell interference effects in Higgs boson final states

Top quark loops in Higgs production via gluon fusion at large invariant final state masses can induce important interference effects in searches for additional Higgs bosons as predicted in, e.g., Higgs portal scenarios and the minimal supersymmetric Standard Model when the heavy scalar is broad or the final state resolution is poor. Currently, the limit setting as performed by both ATLAS and CMS is based on injecting a heavy Higgs-like signal neglecting interference effects. In this study, we perform a study of such “on-shell” interference effects in pp → ZZ and find that they lead to a ≲O(30%) width scheme-dependent modification of the signal strength. Finally, including the continuum contributions to obtain, e.g., the full pp → ZZ → 4l final state, this modification is reduced to the 10% level in the considered intermediate mass range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗