Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “L CODES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Secondary particle contribution to LET spectra on LDEF

Four experiments utilizing passive detectors (P0006, P0004, A0015, M0004) were flown on LDEF to study the radiation environment. These experiments have been summarized in a companion paper (Benton et al., 1996). One of the experimental goals was to measure LET spectra at different locations and shielding depths with plastic nuclear track detectors (PNTD). It was found that the LET spectra extended well above the LET cutoff imposed by the geomagnetic field on GCR particle penetration into LEO. The high LET particles detected were mostly short-range (range < 2000 m), indicating that they were secondaries produced locally within the PNTD. The presence of these high LET particle fluences is important for the determination of dose equivalent because of the high Quality Factors (Q) involved. A relatively small fraction of particle fluence can contribute a large fraction of dose equivalent. Short-range, inelastic secondary particles produced by trapped protons in the South Atlantic Anomaly (SAA) were found to be a major contributor to the LET spectra above 100 keV/micrometer. The LET spectra were found to extend beyond the approximately 137 keV/micrometer relativistic GCR Fe peak to over 1000 keV/micrometer. The high LET tail of the LET spectra was measured in CR-39 and polycarbonate PNTDs using different techniques. GCR made a relatively modest contribution to the LET spectra as compared to the contributions from short-range secondary particles and stopping protons. LET spectra intercomparisons were made between LDEF measurements and exposures to 154 MeV accelerated proton beams. The similarities support the role of nuclear interactions by trapped protons as the major source of secondary particles in the PNTDs. Also techniques were employed to reduce the range cutoff for detection of the short-range secondaries to approximately 1 micrometer, so that essentially all secondary particles were included in the LET spectra. This has allowed a more realistic assessment of secondary contribution to dose equivalent. Comparisons of measured and calculated LET spectra have been made that demonstrate the need for more accurate modeling of secondary particles in radiation transport codes. Comparisons include preliminary calculations in which attempts have been made to include secondary particles.

long duration↗

A Method for the Constrained Design of Natural Laminar Flow Airfoils

A fully automated iterative design method has been developed by which an airfoil with a substantial amount of natural laminar flow can be designed, while maintaining other aerodynamic and geometric constraints. Drag reductions have been realized using the design method over a range of Mach numbers, Reynolds numbers and airfoil thicknesses. The thrusts of the method are its ability to calculate a target N-Factor distribution that forces the flow to undergo transition at the desired location; the target-pressure-N-Factor relationship that is used to reduce the N-Factors in order to prolong transition; and its ability to design airfoils to meet lift, pitching moment, thickness and leading-edge radius constraints while also being able to meet the natural laminar flow constraint. The method uses several existing CFD codes and can design a new airfoil in only a few days using a Silicon Graphics IRIS workstation.

Green, Bradford E.↗

A Software Platform for Post-Processing Waveform-Based NDE

Ultrasonic, microwave, and terahertz nondestructive evaluation imaging systems generally require the acquisition of waveforms at each scan point to form an image. For such systems, signal and image processing methods are commonly needed to extract information from the waves and improve resolution of, and highlight, defects in the image. Since some similarity exists for all waveform-based NDE methods, it would seem a common software platform containing multiple signal and image processing techniques to process the waveforms and images makes sense where multiple techniques, scientists, engineers, and organizations are involved. This presentation describes NASA Glenn Research Center's approach in developing a common software platform for processing waveform-based NDE signals and images. This platform is currently in use at NASA Glenn and at Lockheed Martin Michoud Assembly Facility for processing of pulsed terahertz and ultrasonic data. Highlights of the software operation will be given. A case study will be shown for use with terahertz data. The authors also request scientists and engineers who are interested in sharing customized signal and image processing algorithms to contribute to this effort by letting the authors code up and include these algorithms in future releases.

Roth, Donald J.↗

Planning In-Flight Calibration for XRISM

The XRISM X-ray observatory will fly two advanced instruments, the Resolve high-resolution spectrometer and the Xtend wide-field imager. These instruments, particularly Resolve, pose calibration challenges due to the unprecedented combination of spectral resolution, spectral coverage, and effective area, combined with a need to characterize the imaging fidelity of the full instrument system to realize the mission’s ambitious science goals. We present the status of the XRISM in-flight calibration plan, building on lessons from Hitomi and other X-ray missions. We present a discussion of targets and observing strategies to address the needed calibration measurements, with a focus on developing methodologies to plan a thorough and flexible calibration campaign and provide insight on calibration systematic error. We also discuss observations that exploit Resolve’s spectral resolution to calibrate atomic codes, and cross-calibration between the XRISM instruments and with other observatories.

Eric D Miller↗

Analytic investigation of helicopter rotor blade appended aeroelastic devices

Analytic evaluations of four different passive aeroelastic devices appended to helicopter rotor blades are presented. The devices consist of a passive tuned tab, a control coupled tab, an all-flying tip and a harmonic dilational airfoil tip. Each device was conceived for improving either aerodynamic performance or reducing vibratory control loads or hub shears. The evaluation was performed using a comprehensive rotor aeroelastic analysis (the G400PA code with appropriate modifications), together with data for a realistic helicopter rotor blade (the UH-60A Blackhawk), in high speed flight (90 m/s, 175 kts). The results of this study show that significant performance (L/(D sub e)) gains can be achieved with the all-flying free tip. Results from the harmonic dilational airfoil tip show the potential for moderate improvements in L/(D sub e). Finally, the results for the passive tuned tab and the control coupled tab, as configured for this study, show these devices to be impractical. Sections are included which describe the operation of each device, the required G400PA modifications, and the detailed results obtained for each device.

Bielawa, Richard L.↗

Research Study: Space Shuttle Main Engine Plume Flowfield Model

The initial research effort was an in-depth analysis of the shuttle main engine plumes in an effort to improve the flowfield model and to enhance shuttle base heating equipment predictions during ascent. A prediction methodology code was developed incorporating the improved plume model into a predictive tool which could consider different trajectoreis and engine perfromance variables. Various plume flow model improvement studies were ongoing at the time of the 51-L accident. Since that time, base heating and plume methodology improvements have continued as part of the overall emphasis on Shuttle design assurance before resuming flight schedule.

Bender, Robert L.↗

SOLPS-ITER validation with TCV L-mode discharges

This work presents a quantitative test of SOLPS-ITER simulations against tokamak a configuration variable (TCV) L-mode experiments. These simulations account for drifts, currents, kinetic neutrals, and carbon impurities providing the most complete edge transport simulations for TCV to date. The comparison is performed on nominally identical discharges carried out to assess the effectiveness of TCV’s divertor baffles in the framework of the European Plasma Exhaust program and employs numerous edge diagnostics providing a detailed code-experiment benchmark for TCV. The simulations show a qualitative consistency, but the quantitative differences remain, which are assessed herein. It is found that, for a given separatrix density, the simulations most notably yield a colder, and denser, divertor state with a higher divertor neutral pressure than measured.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Stable and radioactive carbon isotope partitioning in soils and saturated systems: a reactive transport modeling benchmark study

This benchmark provides the first rigorous test of a three-isotope system [ 12 C, 13 C, and 14 C] subject to the combined effects of radioactive decay and both stable equilibrium and kinetic fractionation. We present a series of problems building in complexity based on the cycling of carbon in both organic and inorganic forms. The key components implement (1) equilibrium fractionation between multiple coexisting carbon species as a function of pH, (2) radioactive decay of radiocarbon with associated mass-dependent speciation demonstrating appropriate correction of the Δ 14 C value in agreement with reporting convention, and (3) kinetic stable isotope fractionation due to the oxidation of organic carbon to inorganic forms as a function of time and space in an open, through-flowing system. Participating RTM codes are CrunchTope, ToughReact, Hytec, and The Geochemist’s Workbench. Across all problem levels, simulation results from all RTMs demonstrate good agreement.

58 GEOSCIENCES↗

Spatial calibration and synthetic diagnostic of a multi-energy hard x-ray camera at WEST tokamak

WEST (tungsten environment in steady-state tokamak) is starting operation for the first time with a water-cooled full tungsten divertor, enabling long pulse operation. Heating is provided by radiofrequency systems, including lower hybrid current drive (LHCD). In this context, a compact multi-energy hard x-ray camera has been installed for energy and space-resolved measurements of the electron temperature, the fast electron tail density produced by LHCD and runaway electrons, and the beam–target emission of tungsten at the target due to fast electron losses interacting with the divertor plates. The diagnostic is a pinhole camera based on a 2D pixel array detector (Pilatus 3 CdTe CMOS Hybrid-Pixel detector produced by DECTRIS). The novelty of this diagnostic technique is the detector’s capability of adjusting the threshold energy at pixel level. This innovation provides great flexibility in the energy configuration, allowing simultaneous space and energy-resolved x-ray measurements. This contribution details two important steps in the preparation of the diagnostic operation. First, the in-vessel spatial calibration that was carried out with a radioactive source. Second, the synthetic diagnostic is obtained by the suite of codes ALOHA/C3PO/LUKE/R5-X2, which simulates LH wave propagation and absorption, as well as the fast electron bremsstrahlung production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The very high n Rydberg series of Ar 16+ in Alcator C-Mod tokamak plasmas

We report x-ray transitions of the very high-n Rydberg series in Ar 16+ have been observed from Alcator C-Mod tokamak plasmas. Individual emission lines up to 1s16p-1s 2 have been resolved and the central chord line brightnesses with principal quantum number n between 7 and 16 are generally found to decay as 1/n α , with α slightly larger than 3. In the plasma periphery, emission from 1s9p-1s 2 and 1s10p-1s 2 are found to be significantly enhanced relative to this decrease, indicative of selected population of these levels through charge exchange between background neutral deuterium in the ground state and Ar 17+ . An unresolved feature between the wavelengths of 1s27p-1s 2 and 1s30p-1s 2 is also present, which arises through charge exchange with neutral deuterium in the n* = 3 excited state. The brightnesses of transitions populated by charge exchange are spatially up/down asymmetric, with an excess on the side of the magnetic surface X-point. The relative brightness of the unresolved very high-n feature compared to 1s7p-1s 2 is found to increase with electron temperature and decrease with electron density. Simulations of line emission just on the long wavelength side of the Ar 16+ ionization limit indicate that the principal quantum number decay exponent is closer to α = 4 at very high n. The brightness dependence on n below 16 is in excellent agreement with calculations from the flexible atomic code package.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The Promise of Emergent Nanobiotechnologies for In Vivo Applications and Implications for Safety and Security

Nanotechnology, the multi-disciplinary field based on the exploitation of the unique physicochemical properties of nanoparticles (NPs) and nanoscale materials, has opened a new realm of possibilities for biological research and biomedical applications. The development and deployment of mRNA-NP vaccines for COVID-19, for example, may revolutionize vaccines and therapeutics. However, regulatory and ethical frameworks that protect the health and safety of the global community and environment are lagging, particularly for nanotechnology geared towards biological applications (i.e., bio-nanotechnology). Considering this, the following review, while not comprehensive, attempts to illustrate the breadth and promise of bionanotechnology developments, and how they may present future safety and security challenges. Specifically, we address current advancements to streamline the development of engineered NPs for in vivo applications and provide discussion on nano-bio interactions, NP in vivo delivery, nano-enhancement of human performance, nanomedicine, and the impacts of NPs on human health and the environment.

59 BASIC BIOLOGICAL SCIENCES↗

CMakePPLang: An object-oriented extension to CMake

CMakePPLang is an object-oriented extension to the CMake language written entirely using the original CMake language, with the goal of making projects built on CMake easier to create and maintain. That said, CMakePPLang has different coding practices, paradigms, and standards than the original CMake language, much in the same way that C++ coding differs from C coding despite some level of interoperability. Currently, CMakePPLang is used within the CMakePP organization as the foundation for two in-progress projects: CMakeTest and CMaize. CMakeTest provides a solution for unit testing CMake and CMakePPLang code. CMaize is a CMake tool to simplify interoperability between projects and writing their build systems.

97 MATHEMATICS AND COMPUTING↗

Commissioning the H i Observing Mode of the Beam Former for the Cryogenically Cooled Focal L-band Array for the GBT (FLAG)

We present the results of commissioning observations for a new digital beam-forming back end for the Focal plane L-band Array for the Robert C. Byrd Green Bank Telescope (FLAG), a cryogenically cooled Phased Array Feed (PAF) with the lowest measured T {sub sys}/η of any PAF outfitted on a radio telescope to date. We describe the custom software used to apply beam-forming weights to the raw element covariances to create research-quality spectral-line images for the new fine-channel mode, study the stability of the beam weights over time, characterize FLAG’s sensitivity over a frequency range of 150 MHz, and compare the measured noise properties and observed distribution of neutral hydrogen emission from several extragalactic and Galactic sources with data obtained with the current single-pixel L-band receiver. These commissioning runs establish FLAG as the preeminent PAF receiver currently available for spectral-line observations on the world’s major radio telescopes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The Very High n Rydberg Series of Ar^16+ in Alcator C-Mod Tokamak Plasmas

X-ray transitions of the very high-n Rydberg series in Ar^16+ have been observed from Alcator C-Mod tokamak plasmas. Individual emission lines up to 1s16p - 1s^2 have been resolved and the central chord line brightnesses with principal quantum number n between 7 and 16 are generally found to decay as 1/n^alpha, with alpha slightly larger than 3. In the plasma periphery, emission from 1s9p - 1s^2 and 1s10p - 1s^2 are found to be significantly enhanced relative to this decrease, indicative of selected population of these levels through charge exchange between background neutral deuterium in the ground state and Ar^17+. An unresolved feature between the wavelengths of 1s27p - 1s^2 and 1s30p - 1s^2 is also present, which arises through charge exchange with neutral deuterium in the n^* = 3 excited state. The brightnesses of transitions populated by charge exchange are spatially up/down asymmetric, with an excess on the side of the magnetic surface X-point. The relative brightness of the unresolved very high-n feature compared to 1s7p - 1s^2 is found to increase with electron temperature and decrease with electron density. Simulations of line emission just on the long wavelength side of the Ar^16$ ionization limit indicate that the principal quantum number decay exponent is closer to alpha = 4 at very high n. The brightness dependence on n below 16 is in excellent agreement with calculations from the Flexible Atomic Code package.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Computation of three-dimensional nozzle-exhaust flow fields with the GIM code

A methodology is introduced for constructing numerical analogs of the partial differential equations of continuum mechanics. A general formulation is provided which permits classical finite element and many of the finite difference methods to be derived directly. The approach, termed the General Interpolants Method (GIM), can combined the best features of finite element and finite difference methods. A quasi-variational procedure is used to formulate the element equations, to introduce boundary conditions into the method and to provide a natural assembly sequence. A derivation is given in terms of general interpolation functions from this procedure. Example computations for transonic and supersonic flows in two and three dimensions are given to illustrate the utility of GIM. A three-dimensional nozzle-exhaust flow field is solved including interaction with the freestream and a coupled treatment of the shear layer. Potential applications of the GIM code to a variety of computational fluid dynamics problems is then discussed in terms of existing capability or by extension of the methodology.

Spradley, L. W.↗

Digital ultrasonic signal processing: Primary ultrasonics task and transducer characterization use and detailed description

This manual describes the use of the primary ultrasonics task (PUT) and the transducer characterization system (XC) for the collection, processing, and recording of data received from a pulse-echo ultrasonic system. Both PUT and XC include five primary functions common to many real-time data acquisition systems. Some of these functions are implemented using the same code in both systems. The solicitation and acceptance of operator control input is emphasized. Those operations not under user control are explained.

Hammond, P. L.↗

An update on the use of the VLA for telemetry reception

An analysis is modified to incorporate the actual structure of the command signal system of the very large array (VLA). In particular, in addition to the 1-ms command signal there is a data invalid signal that is generated. The command signals are transmitted to the antennas during the period in which the data invalid signal is on. This means that the gaps in the received data are really 1.6 ms long rather than 1 ms long. Simulation results with this taken into account show that the VLA will not support (7, 1/2) convolutionally encoded telemetry at acceptable error rates at any of the Voyager telemetry data rates. VLA will support Voyager encounters provided that either concatenated coding is implemented, VLA is arrayed with another receiving site (such as Goldstone), or VLA is reconfigured so that the gaps are rotated.

Deutsch, L. J.↗

Aeroelastic analysis for propellers - mathematical formulations and program user's manual

Mathematical development is presented for a specialized propeller dedicated version of the G400 rotor aeroelastic analysis. The G400PROP analysis simulates aeroelastic characteristics particular to propellers such as structural sweep, aerodynamic sweep and high subsonic unsteady airloads (both stalled and unstalled). Formulations are presented for these expanded propeller related methodologies. Results of limited application of the analysis to realistic blade configurations and operating conditions which include stable and unstable stall flutter test conditions are given. Sections included for enhanced program user efficiency and expanded utilization include descriptions of: (1) the structuring of the G400PROP FORTRAN coding; (2) the required input data; and (3) the output results. General information to facilitate operation and improve efficiency is also provided.

Bielawa, R. L.↗