Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Microstructures and Mechanical Properties of Tungsten Wire/Particle-Reinforced Cu{sub 48}Hf{sub 43}Al{sub 9} Bulk Metallic Glass Composites

The Cu{sub 49}Hf{sub 42}Al{sub 9} bulk metallic glass with a critical diameter of 10 mm was recently developed by J. Xu et al. We attempted to reproduce this alloy and developed Cu-Hf-Al ternary systems. The maximum critical diameter of the new bulk glassy alloy was 6 mm. The width of the supercooled liquid region {delta}Tx = Tx-Tg for this glass was 73 deg. K. To increase the toughness of these metallic glasses, the Cu{sub 48}Hf{sub 43}Al{sub 9} bulk metallic glass-forming liquid was reinforced with 50% volume fraction tungsten particles and 80% volume fraction composite with 242.4-{mu}m tungsten wire. Composites with critical diameters of 7 mm and lengths of 70 mm were synthesized. Structure, thermal stability, and microstructure of the composites were studied by X-ray diffraction, differential scanning calorimetry, and scanning electron microscope. The mechanical properties of the composites were studied in compression tests.

36 MATERIALS SCIENCE↗

Synthesis and Characterization, Thermal Stability and Magnetic Properties of Metallic Glass Free Layer of Magnetic Tunnel Junctions

Ferromagnetic CoFeSiB and NiFeSiB metallic glasses were produced to study the thermal and magnetic properties of glassy alloys which show the good performance for free layers in the Magnetic tunnel junctions (MTJs). The characters of amorphous materials are compared with crystalline materials composed of CoFe and NiFe. X-ray diffraction pattern was used to confirm the amorphous and crystalline state of melt-spun ribbons. The thermal stability and crystallization processes were investigated by differential scanning calorimeter (DSC). The thermal properties of amorphous alloys represent by the parameters; glass transition temperature (>580 deg. K), crystallization temperature (<830 deg. K), the large supercooled liquid region ({delta}T = Tx-Tg), the reduced glass transition temperature (Trg = Tg/Tm). The alloys exhibit the soft magnet properties of high saturated magnetization (Ms), low coercive force (Hc) and high effective permeability ({mu}e) represented to the hyeteresis loops. The magnetic characters for all alloys are measured by vibrating sample magnetometer (VSM). Amorphous ferromagnetic free layers in MTJs have a lower Ms and a higher anisotropy constant than crystalline layers. The experimental results explain how the metallic glass for free layer performs better than crystal. The good combination of thermal and magnetic properties in the amorphous material indicates the possibility of application as the glassy magnetic material.

36 MATERIALS SCIENCE↗

Diffusion Experiment in Lithium Ionic Conductors with the Radiotracer of {sup 8}Li: from Micro- to Nano-diffusion

We have developed a radiotracer method for diffusion studies in lithium ionic conductors, by using, as the tracer, the short-lived {alpha}-emitting radioisotope of {sup 8}Li from TRIAC (Tokai Radioactive Ion Accelerator Complex). In the method, we measured {alpha}-particles coming out of the sample of interest and have found that the time-dependent yields of {alpha}-particle from the diffusing {sup 8}Li primarily implanted is a good measure of the Li diffusion in the sample. The method has been successfully applied to measure the lithium diffusion coefficients in a typical defect-mediated lithium ionic conductor of LiGa, well demonstrating that the method is very efficient to measure the diffusion in the micro-meter regime per second. Further development, as an extension of the present method, was proposed to measure the diffusion on the nanoscale in lithium ionic conductors.

36 MATERIALS SCIENCE↗

AN ACOUSTICALLY DRIVEN MAGNETIZED TARGET FUSION REACTOR

We propose a new acoustic compression scheme for a MTF power plant. A strong acoustic wave is produced by piston impacts. The wave focuses in liquid PbLi to compress a pre-formed FRC plasma. Simulations indicate the possibility of building an economical 60 MWe power plant. A proof-of-principle experiment produces a small D-D fusion yield of 2000 neutrons per shot.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Screening in Reaction Between Protons and Lithium Nuclei

We have measured the cross section for the {sup 1}H({sup 7}Li,{alpha}){sup 4}He reaction at lithium beam energies from 0.34 to 1.05 MeV. Hydrogen was forced by diffusion into Pd and PdAg alloy foils. A large electron screening effect was not observed at high hydrogen concentrations, while at low H/metal ratio the results are inconclusive. A dependence of the screening potential on Hall coefficient of the metallic host could not be confirmed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structure and giant magnetoresistance of granular Co-Cu nanolayers prepared by cross-beam pulsed laser deposition

A series of Co{sub x}Cu{sub 100-x} (x=0, 40-75, 100) layers with thicknesses between 13 and 55 nm were prepared on silicon substrates using cross-beam pulsed laser deposition. Wide-angle x-ray diffraction (WAXRD), transmission electron microscopy (TEM), and electrical transport measurements revealed a structure consisting of decomposed cobalt and copper grains with grain sizes of about 10 nm. The influence of cobalt content and layer thickness on the grain size is discussed. Electron diffraction indicates the presence of an intermetallic Co-Cu phase of Cu{sub 3}Au structure type. Thermal treatment at temperatures between 525 and 750 K results in the progressive decomposition of Co and Cu, with an increase of the grain sizes up to about 100 nm. This is tunable by controlling the temperature and duration of the anneal, and is directly observable in WAXRD patterns and TEM images. A careful analysis of grain size and the coherence length of the radiation used allows for an accurate interpretation of the x-ray diffraction patterns, by taking into account coherent and noncoherent scattering. The alloy films show a giant magnetoresistance of 1%-2.3% with the maximum obtained after annealing at around 725 K.

36 MATERIALS SCIENCE↗

First principle prediction of half-metallic ferromagnetism above room temperature in half-heusler alloys

A first principle study of half-metallicity and ferromagnetism in half-heusler alloys NiMnZ (Z = Si, P, Ge, As, and Sb) is given. The half-metallicity and ferromagnetism are predicted via the calculation of electronic structure, and Curie temperature. The stability of the orthorhombic and tetragonal structures and C1{sub b} at various values of lattice parameters is also studied by means of the pseudo-potential method. All alloys exhibit the half-metallicity and ferromagnetism above room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multiscale modeling of the influence of Fe content in a Al-Si-Cu alloy on the size distribution of intermetallic phases and micropores

A multiscale model was developed to simulate the formation of Fe-rich intermetallics and pores in quaternary Al-Si-Cu-Fe alloys. At the microscale, the multicomponent diffusion equations were solved for multiphase (liquid-solid-gas) materials via a finite difference framework to predict microstructure formation. A fast and robust decentered plate algorithm was developed to simulate the strong anisotropy of the solid/liquid interfacial energy for the Fe-rich intermetallic phase. The growth of porosity was controlled by local pressure drop due to solidification and interactions with surrounding solid phases, in addition to hydrogen diffusion. The microscale model was implemented as a subroutine in a commercial finite element package, producing a coupled multiscale model. This allows the influence of varying casting conditions on the Fe-rich intermetallics, the pores, and their interactions to be predicted. Synchrotron x-ray tomography experiments were performed to validate the model by comparing the three-dimensional morphology and size distribution of Fe-rich intermetallics as a function of Fe content. Large platelike Fe-rich {beta} intermetallics were successfully simulated by the multiscale model and their influence on pore size distribution in shape castings was predicted as a function of casting conditions.

36 MATERIALS SCIENCE↗

Magnetic and magnetotransport properties of arrays of nanostructured antidots obtained by self-assembling polystyrene nanosphere lithography

A well-ordered nanopatterned structure has been obtained in sputtered magnetic thin films by self-assembling of polystyrene nanospheres. Arrays of holes in Co, Ni, and Ni{sub 80}Fe{sub 20} films having a mean size ranging in the interval of 200-400 nm depending on the experimental condition have been prepared. Sample microstructure has been studied by scanning electron microscopy and atomic force microscopy. Room-temperature hysteresis loops have been measured in the parallel and perpendicular configuration (H{sub max}=20 kOe). Magnetoresistance (MR) measurements have been performed by means of a standard four-contact technique at several angles between the current and the magnetic field (H{sub max}=70 kOe) in the temperature interval of 4-200 K. An anisotropic MR effect has been observed in all compositions independent on the hole mean dimension. The role on magnetic and magnetotransport properties of either sample microstructure or composition has been studied in such patterned structures.

36 MATERIALS SCIENCE↗

NbAl Intelligent Material Through Mechanical Alloying

An intelligent material of Nb-Al composite, is expected to produce intermetallics phase instantaneously upon collision with hypervelocity space debris to stop the crack propagation. Intermetallics-free MA powder with Nb dispersion in Al matrix is targeted. Nb-Al powders are mechanically alloyed using agate media. Mechanical alloying (MA) with agate media produced fine intermetallics-free powder of Nb dispersion in Al matrix. Intermetallics-free critical MA powder curve for agate media were established. The optimum critical agate MA powder of 200 rpm 132 hours had intelligent properties.

36 MATERIALS SCIENCE↗

Mechanical Properties of Iron Alumininides Intermetallic Alloy with Molybdenum Addition

In this work, FeAl-based alloys with and without molybdenum addition were fabricated by sintering of mechanically alloyed powders in order to investigate the effect of molybdenum on iron aluminide mechanical properties. Bulk samples were prepared by mechanical alloying for 4 hours, pressing at 360 MPa and sintering at 1000 deg. C for 2 hours. The specimens were tested in compression at room temperature using Instron machine. The phase identification and microstructure of the consolidated material was examined by x-ray diffraction and scanning electron microscope correspondingly. Results show that 2.5 wt%Mo addition significantly increased the ultimate stress and ultimate strain in compressive mode due to solid solution hardening. However, the addition of Mo more than 2.5 wt% was accompanied by a reduction in both properties caused by the presence of Mo-rich precipitate particles.

36 MATERIALS SCIENCE↗

The Production and Characterization of Near Stoichiometric NdFeB-Type HDDR Powder

A study of the processing of HDDR powder with the composition Nd{sub 12.7}Fe{sub 81.3}B{sub 6.0} and Nd{sub 12.2}Fe{sub 81.2}B{sub 5.9}Zr{sub 0.1} have been undertaken. The homogenized alloys were disproportionated at 850 deg. C for 30 minutes and employing a range of recombination temperatures from 790 deg. C to 920 deg. C. The optimum recombination temperature in the HDDR treatment was found to be 880 deg. C. Zr-addition appears to inhibit grain growth during the treatment process.

36 MATERIALS SCIENCE↗

PROCESSING OF HIGH-PERFORMANCE Nb{sub 3}Sn WIRES THROUGH A NEW DIFFUSION REACTION USING Sn BASED ALLOYS

Tightly consolidated Sn-Ta and Sn-B based alloys have been prepared by the reaction among constituent metal powders at 750-775 deg. C. Sn-Ta and Sn-B based alloys exhibit quite similar microstructures. A small amount of Ti addition seems to improve the bonding between Ta or B particles and Sn matrix. Nb{sub 3}Sn wires have been fabricated by the Jelly Roll (JR) and Multi-rod (MR) process using Sn based alloy sheet and rod, respectively. Thick Nb{sub 3}Sn layers with nearly stoichiometric A15 composition are synthesized through a new diffusion mechanism between Nb and Sn based alloy. B{sub c2}(4.2 K)'s of 26.9 T (mid) and 26.5 T (mid) have been obtained in the JR and MR processed wires, respectively, using Sn-Ta based alloy. These wires exhibit enough non-Cu J{sub c} to be used above 20 T and 4.2 K. T{sub c} of JR wires using Sn-B based sheet is 18.14 K (offset) which is slightly higher than that of wires using Sn-Ta based sheet.

36 MATERIALS SCIENCE↗

MECHANICAL PROPERTIES OF MODIFIED JK2LB FOR Nb{sub 3}Sn CICC APPLICATIONS

Since the introduction of the cable-in-conduit conductor (CICC) concept, a variety of alloys have been proposed for fabricating the conduit in high field magnets. The conduit provides containment of the liquid helium coolant and is typically also the primary structural component for the magnet coils. These functions create requirements for strength, toughness, fatigue crack resistance, and fabricability. When the CICC uses Nb{sub 3}Sn superconductor, the conduit alloy must retain good mechanical properties after exposure to the superconductor's reaction heat treatment. Here we present data from cryogenic tensile, fracture toughness, fatigue crack growth rate, and axial fatigue tests for a modified heat of JK2LB, before and after the exposure to the reaction heat treatment. The alloy is presently being considered as a candidate for use in ITER Central Solenoid (CS) Coils. The direct comparison of the data from the comprehensive test program with earlier versions of JK2LB and another CICC candidate alloy (modified 316LN) is intended to assist design engineers with material selection for CICC applications.

36 MATERIALS SCIENCE↗

Influence of the substrate stiffness on the crystallization process of sputtered TbFe{sub 2} thin films

Despite the giant magnetostriction of TbFe{sub 2}, this material has a very limited popularity in real applications, due to the difficulties for obtaining the Laves phase on thin films. Here we report on the properties of annealed TbFe{sub 2} films deposited by sputtering on different substrates and with different buffer materials. We find that the presence of the highly magnetostrictive Laves phase is not necessarily related to crystallinity of the substrate. Strikingly we find a correlation between the degree of TbFe{sub 2} crystallization and the rigidity of the substrate or the buffer layer underneath the TbFe{sub 2}. This opens the possibility of easy manufacturing of devices based on TbFe{sub 2} layers.

36 MATERIALS SCIENCE↗

TESTING OF NB{sub 3}SN QUADRUPOLE COILS USING MAGNETIC MIRROR STRUCTURE

This paper describes the design and parameters of a quadrupole mirror structure for testing the mechanical, thermal and quench performance of single shell-type superconducting quadrupole coils at field, current and force levels similar to that of real magnet. The concept was experimentally verified by testing two quadrupole coils, previously used in quadrupole models, in the developed mirror structure in the temperature range from 4.5 to 1.9 K. The coils were instrumented with voltage taps, heaters, and strain gauges to monitor their mechanical and thermal properties and quench performance. A new quadrupole coil made of improved Nb{sub 3}Sn RRP-108/127 strand and cable insulation based on E-glass tape was also tested using this structure. The fabrication and test results of the quadrupole mirror models are reported and discussed.

36 MATERIALS SCIENCE↗

PERFORMANCE OF NB{sub 3}SN QUADRUPOLE MAGNETS UNDER LOCALIZED THERMAL LOAD

This paper describes the results of design and analyses performed on 120-mm Nb{sub 3}Sn and NbTi quadrupole magnets with parameters relevant for the LHC IR upgrade. A realistic radiation heat load is evaluated in a wide luminosity range and translated into the magnet quench performance. The simulation results are supported by thermal measurements on a 90-mm Nb{sub 3}Sn quadrupole coil.

42 ENGINEERING↗

Development and Test of Collaring Methods for Nb$_3$SN Quadrupole Magnets

Fermilab is developing Nb 3 Sn quadrupole magnets for the planned upgrade of interaction regions of the Large Hadron Collider (LHC). Two distinctly different approaches have been employed, one using quadrupole‐symmetric and one using dipole‐symmetric collar laminations. This paper describes the design features of both collar types, collaring techniques for brittle Nb 3 Sn coils, and compares the advantages and disadvantages of the two approaches. Results of mechanical analysis for quadrupoles based on dipole‐type and quadrupole‐type collars are presented. Magnet construction issues and test results are reported. Test results include coil and component strain measurements during construction. Plans for the completion and test of the first dipole‐symmetric assembly are described.

Bossert, R.↗