Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydro”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Analysis of trends in experimental observables: Reconstruction of the implosion dynamics and implications for fusion yield extrapolation for direct-drive cryogenic targets on OMEGA

This paper describes a technique for identifying trends in performance degradation for inertial con finement fusion implosion experiments. It is based on reconstruction of the implosion core with a combination of low- and mid-mode asymmetries. This technique was applied to an ensemble of hydro-equivalent deuterium-tritium implosions on OMEGA that achieved inferred hot-spot pressures ≈56 ± 7 Gbar [S. Regan et al., Phys. Rev. Lett. 117, 025001 (2016)]. All the experimental observables pertaining to the core could be reconstructed simultaneously with the same combination of low and mid modes. This suggests that in addition to low modes, that can cause a degradation of the stagnation pressure, mid modes are present that reduce the size of the neutron and x-ray producing volume. The systematic analysis shows that asymmetries can cause an overestimation of the total areal density in these implosions. Finally, it is also found that an improvement in implosion symmetry resulting from correction of either the systematic mid or low modes would result in an increase of the hot-spot pressure from 56 Gbar to ≈ 80 Gbar and could produce a burning plasma when the implosion core is extrapolated to an equivalent 1.9 MJ symmetric direct illumination [A. Bose et al., Phys. Rev. E 94, 011201(R) (2016)].

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Late-time mixing and turbulent behavior in high-energy-density shear experiments at high Atwood numbers

The LANL Shear Campaign uses millimeter-scale initially solid shock tubes on the National Ignition Facility to conduct high-energy-density hydrodynamic plasma experiments, capable of reaching energy densities exceeding 100 kJ/cm3. These shock-tube experiments have for the first time reproduced spontaneously emergent coherent structures due to shear-based fluid instabilities [i.e., Kelvin-Helmholtz (KH)], demonstrating hydrodynamic scaling over 8 orders of magnitude in time and velocity. The KH vortices, referred to as “rollers,” and the secondary instabilities, referred to as “ribs,” are used to understand the turbulent kinetic energy contained in the system. Their evolution is used to understand the transition to turbulence and that transition's dependence on initial conditions. Experimental results from these studies are well modeled by the RAGE (Radiation Adaptive Grid Eulerian) hydro-code using the Besnard-Harlow-Rauenzahn turbulent mix model. Information inferred from both the experimental data and the mix model allows us to demonstrate that the specific Turbulent Kinetic Energy (sTKE) in the layer, as calculated from the plan-view structure data, is consistent with the mixing width growth and the RAGE simulations of sTKE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of a directly driven multi-shell platform: Laser drive energetics

Simulations predict that directly driven multi-shell targets can provide a robust alternative to conventional high-convergence implosion concepts by coupling two to three times more energy into the final igniting thermonuclear fuel assembly than indirect-drive concepts. The three-shell directly driven Revolver concept [K. Molvig, M. J. Schmitt, B. J. Albright, E.S. Dodd, N.M. Hoffman, G.H. McCall, and S.D. Ramsey, Phys. Rev. Lett. 116, 255003 (2016)] utilizes a design that maximizes laser energy conversion into inward kinetic energy of the outermost ablator shell (~9%) while minimizing the DT fuel convergence (~9) to reduce the mixing of material from the innermost shell into the fuel. Inherent in this design concept is the use of 192 narrow beams (with a 1/e laser beam-to-capsule diameter ratio of 0.33) from the National Ignition Facility laser pointed in a polar direct drive laser configuration. In this paper, we demonstrate that low average laser intensity at the capsule surface (≤300 TW/cm 2 ) limits the measured laser backscatter, indicating that a greater amount of laser energy is coupled into the target. Omega experiments have been performed to determine the coupling of laser energy to the outermost shell of a scaled Revolver target (i.e., the ablator shell) by measuring capsule implosion trajectories and scattered-light fractions for two different drive configurations. Comparisons of simulated shell trajectory and velocity profiles with experimental data obtained from self-emission images show good agreement and are consistent with measured scattered light data. Furthermore, the low levels of scattered light measured are consistent with post-shot simulation results that show high hydro-coupling efficiency. These results strengthen the case for using narrow beams at low intensity to drive large ablator capsules for future direct-drive, multi-shell ignition concepts.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Physics of the implosion up until the time of ignition in a revolver (triple-shell) capsule

Here, a revolver is designed to have two dynamical fuel implosion stages to reach ignition: a shock phase in which the fuel is pre-heated up until the shock collapses at the capsule center, followed by an adiabatic compression phase to ignition. This picture assumes ideal hydrodynamics. Employing the state-of-the-art, hybrid (kinetic-ion/fluid electron), multi-ion Vlasov-Fokker-Planck code, iFP, along with semi-analytic predictions from ideal hydrodynamics in spherical geometry, we confirm this two phase picture—resolving some outstanding questions in Revolver design along the way. Although we find that shock kinetic effects and non-ideality are present in the course of the implosion, these effects do not change the overall dynamics (which is well described by ideal hydrodynamics theory). Additionally, we put the assumption of adiabaticity, for the post-collapse phase, to the test. Finally, we verify the ideal hydro-conjecture that the shock collapse (fuel) convergence is ~2.12 given a single shock, and we confirm that the convergence is about 2.5 in the case of two shocks—in agreement with previous radiation-hydrodynamics simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectral characterization of flash and high flux x-ray radiographic sources with a magnetic Compton spectrometer

In this article, we present a new analysis method applied to revitalize permanent magnet Compton spectrometers used to measure photon energy spectra in the MeV range. The inversion of the measured electron distribution to determine the original photon distribution is achieved via a method of consistent coupled radiation transport and magnetic field mapping of the input photon spectra to the measured electron distribution. The method of linear least squares was used to perform the unfolding of the electron distribution to the initial photon spectra, without any assumptions made regarding the electron distribution. We present an application of this method to data from a nominal 19.4 MeV flash radiographic source (the first axis of the Dual Axis Radiographic Hydro-Test Facility) capable of generating 500 R @ 1 m in ~60 ns and a medical therapy source (a Scanditronix M22, Microtron) capable of variable energies with nominal endpoints of 6, 10, 15, and 20 MeV and an output of ~1000–2000 R/min @ 1 m. The results provide agreement between the modeled and unfolded experimentally measured photon spectra as quantified by statistical tests, from 1.5 to 20 MeV. Experimental results are presented as well as a discussion of the novel MCNP6-based simulations and methods for reconstruction of the spectra.

47 OTHER INSTRUMENTATION↗

Quantitative spatiotemporal density evolution of aluminum heated purely by monochromatic electrons

A spatially resolved air-wedge shearing interferometer and shadowgraph diagnostic provides measurements of electron density with a resolution of ∼40 μm. A ∼100-ns-long, monoenergetic electron bunch at 19.8 MeV and a current of 1.4 kA (8.5×1014 e−) heats 100-μm-thick aluminum (Al) foils in a 1-mm-spot to Te∼1 eV. A 5-ns-long, ∼60 mJ, frequency doubled Nd:YAG laser probes the dense Al plasma. Electron densities up to 1020cm−3 are resolved; the maximum resolvable density is limited by opacity, transmission, and spatial fringe density achievable with the detector. This diagnostic provides measurements of the total phase shift, transmission, and electron density. Several measurements at different time slices provide the ability to determine the velocity of the leading edge of the shadowgraph and compare it to the motion of different density shells. These measurements are also compared to radiation hydrodynamics simulations. A rough quantitative agreement is shown between the hydro simulations and the measurements; there are differences in the exact density distributions.

Coleman, J. E. (ORCID:0000000308873757)↗

Knock-on deuteron imaging for diagnosing the morphology of an ICF implosion at OMEGA

Knock-on deuteron imaging is a new diagnostic technique that is being implemented at the OMEGA laser facility to diagnose the morphology of an inertial confinement fusion (ICF) implosion. It utilizes the fact that some of the neutrons from deuterium–tritium (DT)-fusion reactions generated in the central hot-spot of an ICF implosion elastically scatter deuterons as they traverse the surrounding shell layer. The energy of these “knock-on” deuterons depends on the scattering angle, where the most energetic deuterons are forward-scattered and probe the shape of the central hot-spot, while lower-energy deuterons are made by side-scattering or slowing down in the fuel and carry information about the distribution of the dense DT-fuel layer surrounding the hot-spot. The first proof-of-concept tests have been conducted successfully. In these tests, three penumbral imagers with different views on an implosion recorded deuterons scattered from the dense shell of DT-gas-filled deuterated plastic shell implosions with prescribed offsets. Data from these experiments are presented here, along with novel analysis techniques that iteratively reconstruct the deuteron source from the data. Reconstructed hot-spot and shell radii agree with 1D hydro simulations and indicate a P1 asymmetry in the direction of the offset. A comparison of coaxial deuteron and x-ray images suggests the presence of a mix between the hot-spot and shell on the order of 15 μm. This new diagnostic capability will allow us to study asymmetries in unprecedented detail at OMEGA.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory of the magnetothermal instability in coronal plasma flows

The theory of the magnetothermal instability (MTI) is revisited through the lens of the stability of uniform systems. The linear stability analysis includes flow advection and Nernst transport. The instability criteria derived distinguish between the convective and the absolute nature of the perturbation growth. It is proven that, in the region where the Nernst and plasma blowoff velocities cancel, the MTI can be absolute and wave-packet perturbations grow in situ. This instability is mediated by the internal feedback between the Biermann battery and Righi–Leduc terms. Here, the analysis is extended to derive the dispersion relation for short-wavelength perturbations developing in nonuniform profiles with the application to coronal plasmas. It is found that the condition for MTI requires the net B-field convection velocity to be small at the isothermal sonic section, and the plasma conditions in this section govern the dynamics of the instability. Analysis of hydro-equivalent implosions suggests that unstable perturbations undergo more e-foldings of growth in larger-size targets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The electric fields and “lightning jets” of the Sun and solar wind

A model of electric energization of the solar wind and corona is developed, including electro-magnetic particle effects precluded by traditional magneto-hydro (MHD) assumptions. Using standard 1D radial solar models for particle density and temperature, the core gravito-electric field is calculated; and the range of possible photospheric photo-electric fields is estimated. The extant DC field apparently arises from about 460 C of charge displacement, mainly caused by the immense solar energy flux pushing electrons outward. Energetically, this electric field can accelerate surface protons out of the 2 keV gravity well and up to the 4 keV energies observed in the fast solar wind. The electrical energy is released in pervasive, persistent “proton lightning jets,” which are proton beams, charge-neutralized by co-propagating electrons. The jets are formed by pinched “avalanche breakdown” of the weakly ionized photosphere, probably initiated on the down-welling edges of solar surface granulations. These energetic jets will glow as discrete filamentary surface spicules and will be observed in reflected solar light as the diffuse K-corona. Significantly, the total charge displacement and observed fast wind speed are quantitatively predicted by a novel “virial limit”: the (positive) electrical potential energy at r = 0 is limited in magnitude to the 10 keV gravitational well at r = 0.

Physics↗

Evolution and hot electron generation of laser–plasma instabilities in direct-drive inertial confinement fusion

A series of 2D in-plane plane wave particle-in-cell simulations find distinctive paths of laser-plasma instability evolution in OMEGA-scale implosions, depending on the initial electron temperature. At low temperatures, two-plasmon decay (TPD) dominates in both initial growth and the steady state. At high temperatures, the initial dominant modes switch to stimulated Raman scattering, but TPD still dominates a steady state characterized by cavitation and Langmuir turbulence. A hot electron scaling is also obtained from the simulations that, when combined with laser/plasma conditions from hydro simulations, can predict hot electron generation in implosions that do not employ smoothing-by-spectral-dispersion (SSD). It also shows that under the same laser/plasma conditions, SSD can reduce hot electron generation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Gold L-shell emission spectroscopy as a temperature diagnostic in laser-driven experiments

Measurements of plasma conditions within gold hohlraums are challenging but provide important information about hohlraum energy transport. To date, there are no reliable passive diagnostic approaches that produce information about the hohlraum plasma conditions. Gold L-shell emission spectroscopy is a promising method to measure the electron temperature in multi-keV gold hohlraum plasmas. In this study, we compare time-resolved measurements of gold L-shell spectra against a more conventional electron temperature-sensitive diagnostic, K-shell emission from zinc, a mid-Z dopant. The Au L-shell and Zn K-shell spectra are taken simultaneously. The analysis of both sets of data exhibits good agreement with a singular rad-hydro model, suggesting a similar evolution in the mean electron temperature of the hohlraum plasma. These findings support the use of L-shell spectroscopy of gold as a method to study gold plasma conditions.

Emission spectroscopy↗

Influence of the drive design on ablation front hydrodynamic instability growth in a capsule implosion at the National Ignition Facility

A critical aspect of inertial confinement fusion experiments lies in the control of ablation front instabilities during the implosion process. The growth of Rayleigh–Taylor and Richtmyer–Meshkov instabilities, seeded by target defects, can significantly degrade the performance of the implosion. Here, this study explores the influence of drive design on ablation front stability using the hydro-growth radiography platform at the National Ignition Facility. This platform allows the measurement of the ablation front hydrodynamic instability growth. Because these measurements are restricted to early convergence, their primary role is to constrain the initial instability growth and benchmark the simulations used to infer shell integrity and performance at peak velocity and ignition. Three ignition designs, Hybrid-E (HyE), SQ-n (“S” for scaling and “Q” for quality), and High temperature, High thickness (HiT) were analyzed. The results demonstrated a high dependence of the growth factor on the choice of design, capsule scale as well as the hohlraum conditions, mainly the radiative temperature and the gold M-band emission. HyE and SQ-n display a similar growth factor range, but their evolution is different due to the design differences in hohlraum conditions. HiT has the lowest growth factor of the studied designs, which is a result of a higher radiative temperature. These results highlight the importance of design choices in controlling instability dynamics. These insights inform future drive design strategies to enhance stability and efficiency in fusion ignition experiments.

Physics↗

Photonic methods and technologies for monitoring the ocean and atmosphere

In this paper, we review photonic methods and technologies that are promising for monitoring the ocean and atmosphere and have been implemented mainly in recent years at the Institute of Automation and Control Processes, Far Eastern Branch, Russian Academy of Sciences. We present results of lidar studies that have made it possible to understand key features of ocean – atmosphere interaction processes under continent – ocean transition conditions, which determine specific features of the atmospheric aerosol distribution, small gaseous components of the atmosphere and its optical characteristics. We consider methods and tools for combined optical and laser fluorescence monitoring of the ocean surface. Particular attention is paid to results of research on remote methods and tools for real-time laser-induced and laser fluorescence environmental monitoring of the ocean, including specialised fibre-optic probes and mobile underwater robotic systems. We present results of the development and investigation of highly sensitive, noise-proof fibre-optic hydro- and seismic/acoustic sensors for remote monitoring of the ocean and robotic systems for underwater laser protection of marine vessels, hydraulic structures and oceanographic instruments against the negative impact of biofouling. (invited paper)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Predicting hydraulic structure-induced barotrauma in Australian fish species

When fish pass downstream through river infrastructure, such as dams and weirs, barotrauma may occur due to rapid decompression. In severe cases, barotrauma may lead to mortality. Different species likely respond differently to these decompressions. Therefore, to predict barotrauma for a specific species, surrogate species may not be a valid approach, and it may be necessary to examine each species individually. For this study, Australian bass and carp gudgeon were exposed to a range of rapid decompressions using hyper/hypobaric hydro-chambers and examined for injuries and mortality. Rapid decompression data from these two fish species, in addition to previously examined Murray cod and silver perch were evaluated to determine which injuries were highly associated with and likely to predict mortality. Dose-response logistic regressions models were developed for each species to predict injury and mortality over a range of rapid decompressions. These models are valuable for estimating injury and mortality rates for fish passing though river infrastructure and can be applied to specific sites where pressure profiles have been developed. Applying these models to current and future infrastructure can provide important insight into what measures or design alterations may be necessary to reduce negative impacts of infrastructure on fish populations.

Pflugrath, Brett D.↗

Structural, biophysical, and biochemical insights into C–S bond cleavage by dimethylsulfone monooxygenase

Sulfur is an essential element for life. Bacteria can obtain sulfur from inorganic sulfate; but in the sulfur starvation–induced response,Pseudomonadsemploy two-component flavin-dependent monooxygenases (TC-FMOs) from themsuandsfnoperons to assimilate sulfur from environmental compounds including alkanesulfonates and dialkylsulfones. Here, we report binding studies of oxidized FMN to enzymes involved within theP. fluorescensenzymatic pathway responsible for converting dimethylsulfone (DMSO 2 ) to sulfite. In this catabolic pathway, SfnG serves as the initial TC-FMO for sulfur assimilation, which is investigated in detail by solving the 2.6-Å resolution crystal structure of unliganded SfnG and the 1.75-Å resolution crystal structure of the SfnG ternary complex containing FMN and DMSO 2 . We find that SfnG adopts a (β/α) 8 barrel fold with a distinct quaternary configuration from other tetrameric class C TC-FMOs. To probe the unexpected tetramer arrangement, structural heterogeneity is assessed by chromatography and light scattering to confirm ligand binding correlates with a tetramer. Binding of FMN and DMSO 2 accompanies ordering of the active site, with DMSO 2 bound on thesi-face of the flavin. A previously unobserved protein backbone conformation is found within the oxygen-binding site on there-face of the flavin. Functional assays and the positioning of ligands with respect to the oxygen-binding site are consistent with use of an N5-(hydro)peroxyflavin pathway. Biochemical endpoint assays and docking studies reveal SfnG breaks the C–S bond of a range of dialkylsulfones.

Science & Technology - Other Topics↗

The Effects of Neutrally Buoyant, Externally Attached Transmitters on Swimming Performance and Predator Avoidance of Juvenile Chinook Salmon

The presence of an externally attached telemetry tag is often associated with the potential for impaired swimming performance (i.e., snags and drag) as well as increased susceptibility to predation, specifically for smaller fish. The effects on swimming performance due to the presence of a neutrally buoyant externally attached acoustic transmitter were examined by comparing critical swimming speeds (Ucrit) for juvenile Chinook salmon tagged with two different neutrally buoyant external transmitters (Type A and B), nontagged individuals, and those surgically implanted with the current JSATS acoustic transmitter. Fish tagged with the Type A and B designs had lower Ucrit when compared to nontagged individuals. However, there was no difference in Ucrit among fish tagged with Type A or B designs compared to those with surgically implanted tags. Further testing was then conducted to determine if predator avoidance ability was affected due to the presence of Type A tags when compared to nontagged fish. No difference was detected in the number of tagged and nontagged fish consumed by rainbow trout throughout the predation trials. The results of this study support the further testing on the efficacy of a neutrally buoyant externally attached telemetry tag for survival studies involving juvenile salmonids passing through hydro turbines.

54 ENVIRONMENTAL SCIENCES↗

A linear merging methodology for high-resolution precipitation products using spatiotemporal regression

Currently, the only viable option for a global precipitation product is the merger of several precipitation products from different modalities. In this article, we develop a linear merging methodology based on spatiotemporal regression. Four highresolution precipitation products (HRPPs), obtained through methods including the Climate Prediction Center's Morphing (CMORPH), Geostationary Operational Environmental Satellite-Based Auto-Estimator (GOES-AE), GOES-Based Hydro-Estimator (GOES-HE) and Self-Calibrating Multivariate Precipitation Retrieval (SCAMPR) algorithms, are used in this study. The merged data are evaluated against the Arkansas Red Basin River Forecast Center's (ABRFC's) ground-based rainfall product. The evaluation is performed using the Heidke skill score (HSS) for four seasons, from summer 2007 to spring 2008, and for two different rainfall detection thresholds. It is shown that the merged data outperform all the other products in seven out of eight cases. A key innovation of this machine learning method is that only 6% of the validation data are used for the initial training. The sensitivity of the algorithm to location, distribution of training data, selection of input data sets and seasons is also analysed and presented.

Turlapaty, Anish C↗

Superhydrophobic and superhydrophilic surface-enhanced separation performance of porous inorganic membranes for biomass-to-biofuel conversion applications

A new class of inorganic-based membranes, i.e., High-Performance Architectured Surface Selective (HiPAS) membranes, is introduced to provide high perm-selective flux by exploiting unique separation mechanisms induced by superhydrophobic or superhydrophilic surface interactions and confined capillary condensation in enlarged membrane pores (~8 nm). The super-hydro-tunable HiPAS membranes were originally developed for the purpose of bio-oil/biofuel processing to achieve selective separations at higher flux relative to size selective porous membranes (e.g., inorganic zeolite-based membranes) and better high-temperature tolerance than polymer membranes (>250 C) for hot vapor processing. Due to surface-enhanced separation selectivity, HiPAS membranes can thus possibly enable larger pores to facilitate large-flux separations by increasing from sub-nanometer pores to mesopores (2-50 nm) for vapor phase or micron-scale pores for liquid phase separations. In this paper, we describe an innovative membrane concept and a materials synthesis strategy to fabricate HiPAS membranes, and demonstrate selective permeation in both vapor- and liquid-phase applications. High permeability and selectivity were demonstrated using surrogate mixtures, such as ethanol-water, toluene-water, and toluene-phenol-water. The overall membrane evaluation results show promise for the future processing of biomass pyrolysis and upgraded product vapors and condensed liquid bio-oil intermediates.

09 BIOMASS FUELS↗