Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GUIDANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

A low-cost inertial smoothing system for landing approach guidance

Accurate position and velocity information with low noise content for instrument approaches and landings is required for both control and display applications. In a current VTOL automatic instrument approach and landing research program, radar-derived landing guidance position reference signals, which are noisy, have been mixed with acceleration information derived from low-cost onboard sensors to provide high-quality position and velocity information. An in-flight comparison of signal quality and accuracy has shown good agreement between the low-cost inertial smoothing system and an aided inertial navigation system. Furthermore, the low-cost inertial smoothing system has been proven to be satisfactory in control and display system applications for both automatic and pilot-in-the-loop instrument approaches and landings.

Niessen, F. R.↗

Pilot's manual for automated 4D guidance system

Operational procedures and modes of an experimental 4D guidance system are described from the pilot's point of view. The system consists of the experimental avionics equipment referred to as STOLAND and a specially developed software package for the STOLAND digital computer. A capture mode of the system provides arrival time control and automatic tracking of the 4D flight path from any feasible initial aircraft state to any waypoint. Precise arrival time at a waypoint is achieved by means of speed control or, if large delays are required, by path stretching. Continuous recomputation and display of the capture flight path prior to engaging the system permits the pilot to determine the exact moment for terminating a holding or path stretching maneuver in order to achieve a specified arrival time.

Erzberger, H.↗

Delta launch vehicle inertial guidance system (DIGS)

The Delta inertial guidance system, part of the Delta launch vehicle improvement effort, has been flown on three launches and was found to perform as expected for a variety of mission profiles and vehicle configurations.

Duck, K. I.↗

Optimal horizontal guidance law for aircraft in the terminal area.

Study of the horizontal guidance of aircraft in and near the terminal area. The problem of guiding an aircraft in minimum time from an arbitrary point to the outer marker is formulated as a nonlinear optimal control problem, and the control law solution is obtained by the application of the maximum principle. It is found that for some initial states the problem is singular. Furthermore, the extremal controls for this problem are not unique. Consequently, the optimal controls must be obtained on the basis of the value of the performance index. The control law is implemented in the form of a digital computer program which computes the optimal trajectory for arbitrary initial conditions.

Pecsvaradi, T.↗

Real-time optimal guidance for orbital maneuvering.

A new formulation for soft-constraint trajectory optimization is presented as a real-time optimal feedback guidance method for multiburn orbital maneuvers. Control is always chosen to minimize burn time plus a quadratic penalty for end condition errors, weighted so that early in the mission (when controllability is greatest) terminal errors are held negligible. Eventually, as controllability diminishes, the method partially relaxes but effectively still compensates perturbations in whatever subspace remains controllable. Although the soft-constraint concept is well-known in optimal control, the present formulation is novel in addressing the loss of controllability inherent in multiple burn orbital maneuvers. Moreover the necessary conditions usually obtained from a Bolza formulation are modified in this case so that the fully hard constraint formulation is a numerically well behaved subcase. As a result convergence properties have been greatly improved.

Cohen, A. O.↗

Microprogrammed digital filters for strapdown guidance application.

Discussion of an approach for implementing digital filters using microprogrammed control logic with read only memory (ROM) for strapdown guidance applications, and description of a second-order multiplexed system using multiprogrammed control instruction. The microprogramming technique for control using ROM is shown to enhance higher order digital filter realization. The high speed of digital circuits reduces propagation time and facilitates multiplexing. Programmed ROM's can be altered easily for different algorithms.

Kapadia, K.↗

Navigation, guidance, and control systems for V/STOL aircraft.

The development of digital autopilots and integrated avionics systems, applicable to many classes of vehicles and missions, was undertaken by Sperry Flight Systems in the mid-sixties. The first application of the system was planned for automatic flight control in the U.S. supersonic transport; the termination of that program, however, thwarted any flight experience. The second application, which has additional navigation and energy management functions, is an airborne simulator of the space shuttle vehicle. The latter system underwent a series of successful flight tests in a CV-990 aircraft under contract with NASA. The third application, which has new electronic displays, air data computation, and time-constrained guidance (i.e., specified position and altitude at a specified time), is in the DOT/NASA STOLAND test program. The STOLAND system is described specifically in this paper.

Osder, S. S.↗

Apollo 16 mission Report. Supplement 1: Apollo 16 guidance, navigation, and control system performance analysis report

The results are reported of additional studies which were conducted to supplement conclusions drawn in the MSC Mission Report and analyses which were not completed in time to meet the Mission Report dealine. A detailed evaluation of the Abort Guidance System sensor assembly and results from the investigation of the X gyro loop anomaly are included. Further evidence is presented substantiating the excellent LM IMU performance obtained from preliminary indications. A detailed study is presented of the procedural changes implemented on Apollo 16 to diminish the number and duration of interruptions to the CSM DAP attitude maneuver during P20 Option 5 operations.

Source record↗

Closed-circuit television welding- electrode guidance system

Closed-circuit TV camera is mounted parallel to electrode and moves along with it. Camera is scanned along seam so seam is viewed parallel with scan lines on TV monitor. Two fiber optics illuminators are attached to guidance system; they illuminate seam for TV camera.

Smith, H. E.↗

Space shuttle GN and C equation document: Entry and transition guidance

The entry-guidance routine presented is designed to take the orbiter vehicle from entry interface through the critical heating phase of entry down to the start of the approach phase. The material includes: (1) a functional flow diagram, (2) input and output variables, (3) a description of equations, and (4) detailed flow diagrams.

Marcus, F. J.↗

Terminal guidance system

A terminal guidance system is described including a heading command subsystem and a glide-slope command subsystem which develop command signals for use in guiding an aircraft or other vehicle into a preselected heading and/or altitude at a terminal point. The heading command subsystem is responsive to certain input data and continuously develops command signals for use in directing the aircraft from a remote location to a terminal point so that upon arrival it has a preselected terminal heading. The glide-slope command subsystem is responsive to certain other input data and continuously develops command signals for use in controlling the rate of descent of the aircraft so that it will have a preselected altitude and glide-slope upon arrival at the terminal.

Gee, S. W.↗

Long-duration life tests of slip ring capsule assemblies for inertial guidance platforms

Eight slip ring capsules, each having 80 or 100 circuits, were operated for time periods ranging from 14,300 hours to 24,700 hours. The test mode simulated the motion of gimbal axes of the Saturn inertial guidance the platform in an organic free nitrogen environment. Computer-compiled noise data (approximately 45,000 recordings) were graphed as a function of test time and position within the capsules and as extreme probability distributions. Greater than ninety-nine percent of the noise measurements for the capsules with sufficient lubrication were less than 10 milliohms. Capsules with glass dielectrics did not perform significantly differently than those with filled epoxy dielectrics. The initial wear mode of prow formation was followed by rider wear. After 10 to the 8th power wipes, ring wear depth did not exceed the surface finish and the radial rider wear depth was less than 13 microns.

Cole, S. R.↗

Description of the attitude control, guidance and navigation space replaceable units for automated space servicing of selected NASA missions

Control elements such as sensors, momentum exchange devices, and thrusters are described which can be used to define space replaceable units (SRU), in accordance with attitude control, guidance, and navigation performance requirements selected for NASA space serviceable mission spacecraft. A number of SRU's are developed, and their reliability block diagrams are presented. An SRU assignment is given in order to define a set of feasible space serviceable spacecraft for the missions of interest.

Chobotov, V. A.↗

Technical support for guidance, navigation and control space shuttle program

A review of the guidance, navigation and control projects in support of the space shuttle program was conducted. The subjects considered include the following: (1) functional and performance requirements, (2) mission requirements, (3) operating systems software definition, (4) orbit navigation using various sensors, (5) fault detection, isolation and recovery, and (6) passive rendezvous sensors requirements definition.

Source record↗

Discrete optimal control approach to a four-dimensional guidance problem near terminal areas

Description of a computer-oriented technique to generate the necessary control inputs to guide an aircraft in a given time from a given initial state to a prescribed final state subject to the constraints on airspeed, acceleration, and pitch and bank angles of the aircraft. A discrete-time mathematical model requiring five state variables and three control variables is obtained, assuming steady wind and zero sideslip. The guidance problem is posed as a discrete nonlinear optimal control problem with a cost functional of Bolza form. A solution technique for the control problem is investigated, and numerical examples are presented. It is believed that this approach should prove to be useful in automated air traffic control schemes near large terminal areas.

Nagarajan, N.↗

A guidance and navigation system for continuous low-thrust vehicles

A midcourse guidance and navigation system for continuous low thrust vehicles was developed. The equinoctial elements are the state variables. Uncertainties are modelled statistically by random vector and stochastic processes. The motion of the vehicle and the measurements are described by nonlinear stochastic differential and difference equations respectively. A minimum time trajectory is defined; equations of motion and measurements are linearized about this trajectory. An exponential cost criterion is constructed and a linear feedback quidance law is derived. An extended Kalman filter is used for state estimation. A short mission using this system is simulated. It is indicated that this system is efficient for short missions, but longer missions require accurate trajectory and ground based measurements.

Jack-Chingtse, C.↗

Neighboring optimal guidance theory and computer program

Developments of the linear quadratic optimal control problem are discussed. The theory is applicable to the development of neighboring optimal feedback guidance gains, and is useful as a tool for synthesizing feedback control laws. A computer program which requires only the pertinent matrices of the linear quadratic problem is described.

Powers, W. F.↗

Video Guidance, Landing, and Imaging system (VGLIS) for space missions

The feasibility of an autonomous video guidance system that is capable of observing a planetary surface during terminal descent and selecting the most acceptable landing site was demonstrated. The system was breadboarded and "flown" on a physical simulator consisting of a control panel and monitor, a dynamic simulator, and a PDP-9 computer. The breadboard VGLIS consisted of an image dissector camera and the appropriate processing logic. Results are reported.

Schappell, R. T.↗