Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “GREEN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Multiple pathways link urban green- and bluespace to mental health in young adults

Highlights: • Green/bluespace might support mental health. • We examined pathways underlying the effect. • Increased greenspace supported mental health through indirect pathways. • Bluespace was not clearly associated with mental health. A growing body of scientific literature indicates that urban green- and bluespace support mental health; however, little research has attempted to address the complexities in likely interrelations among the pathways through which benefits plausibly are realized.

54 ENVIRONMENTAL SCIENCES↗

A green degumming approach for lignocellulosic kenaf bast using ethanolamine deep eutectic solvent

Traditional chemical degumming methods for lignocellulosic bast fibers pose substantial challenges, especially when dealing with kenaf bast, which has a high lignin content. Here, these challenges include severe pollution and low efficiency, etc. Therefore, this study developed a novel, green, and efficient degumming approach for lignocellulosic kenaf bast, leveraging choline chloride-ethanolamine (ChCl-ETA) alkaline deep eutectic solvent (DES). The efficacy of the ChCl-ETA DES based degumming method was validated through comprehensive chemical composition analysis, scanning electron microscopy (SEM), Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TG), and two-dimensional (2D) nuclear magnetic resonance (NMR) spectroscopy. Subsequently, the optimal degumming conditions, with a choline chloride to ethanolamine ratio of 1:6 and a degumming temperature of 120 °C, were determined based on the results of the residual gum content. Significantly, the recycled ChCl-ETA DES mixtures could maintain a degumming capacity (revealed by the residual gum content of degummed fibers) comparable to that of the conventional double-boiling method for at least five degumming cycles without purification. Given its low-pollution process and high efficiency, this developed method holds great potential for industrial-scale applications of lignocellulosic bast fibers.

Choline chloride↗

Water-Based Electrode Manufacturing and Direct Recycling of Lithium-Ion Battery Electrodes—A Green and Sustainable Manufacturing System

It is critical to develop a low-cost and environmentally friendly system to manufacture and recycle lithium-ion batteries (LIBs) as the demand on LIBs keeps increasing dramatically. Conventional LIB cathodes are manufactured using N-methyl-2-pyrrolidone as the solvent, which is expensive, highly toxic, flammable, and energy intensive to produce and recover. Ideally, a close-loop industrial supply chain should be built, in which the batteries are manufactured, market harvested, and recycled with minimal external toxic solvent through the whole system. This work demonstrates a green and more sustainable manufacturing method for LIBs where no hazardous organic solvent is used during electrode manufacturing and recycling. The electrodes fabricated via water-based processing demonstrate comparable rate performance and cycle life to the ones from conventional solvent-based processing. Utilization of a water-soluble binder enables recovering the cathode compound from spent electrodes using water, which is successfully regenerated to deliver comparable electrochemical performance to the pristine one.

25 ENERGY STORAGE↗

Random sampling of the Green’s Functions for reversible reactions with an intermediate state

Exact random variate generators were developed to sample Green’s functions used in Brownian Dynamics (BD) algorithms for the simulations of chemical systems. These algorithms, which use less than a kilobyte of memory, provide a useful alternative to the table look-up method that has been used in similar work. The cases that are studied with this approach are (1) diffusion-influenced reactions; (2) reversible diffusion-influenced reactions and (3) reactions with an intermediate state such as enzymatic catalysis. The results are validated by comparison with those obtained by the Independent Reaction Times (IRT) method. This work is part of our effort in developing models to understand the role of radiation chemistry in the radiation effects on human body and may eventually be included in event-based models of space radiation risk.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Stable evaluation of Green's functions in cylindrically stratified regions with uniaxial anisotropic layers

We present a robust algorithm for the computation of electromagnetic fields radiated by point sources (Hertzian dipoles) in cylindrically stratified media where each layer may exhibit material properties (permittivity, permeability, and conductivity) with uniaxial anisotropy. Analytical expressions are obtained based on the spectral representation of the tensor Green's function based on cylindrical Bessel and Hankel eigenfunctions, and extended for layered uniaxial media. Due to the poor scaling of these eigenfunctions for extreme arguments and/or orders, direct numerical evaluation of such expressions can produce numerical instability, i.e., underflow, overflow, and/or round-off errors under finite precision arithmetic. To circumvent these problems, we develop a numerically stable formulation through suitable rescaling of various expressions involved in the computational chain, to yield a robust algorithm for all parameter ranges. Numerical results are presented to illustrate the robustness of the formulation including cases of practical interest.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Green synthesis and characterization of nontoxic L-methionine capped silver and gold nanoparticles

The simple green method for synthesis of stable L-Methionine (L-Met) capped silver (Ag@LM NPs) and gold (Au@LM NPs) nanoparticles (NPs) without adding any additional reduction agent or stabilizer was developed. Colloidal dispersions were characterized by UV–Vis spectrophotometry. The size and spherical shape of NPs were evaluated by transmission electron microscopy. Their surface covering was confirmed by atomic force microscopy, Fourier transform infrared spectroscopy, dynamic light scattering, and zeta potential measurements. Density functional theory calculations pointed that the preferential adsorption mode of L-Met on both Ag and Au surfaces was a vertical binding geometry via –NH2 group, while horizontal binding mode via [sbnd]S[sbnd] and –NH2 groups is also possible. The genotoxicity (evaluated by the micronucleus assay) of NPs, as well as their effects on some oxidative stress parameters (catalase activity, malondialdehyde level), were assessed in vitro using human peripheral blood cells as a model system. The influence of NPs on the morphology of lymphocyte cells studied using atomic force microscopy revealed that the membrane of cells remained unaffected after the treatment with NPs. When considering the effects of NPs on catalase activity and malondialdehyde level, neither particle type promoted oxidative stress. However, the treatment of lymphocytes with Ag@LM NPs induced a concentration-dependent enhancement of the micronuclei incidence and suppression of the cell proliferation while Au@LM NPs promoted cell proliferation, with no significant effects on micronuclei formation. The Ag@LM NPs were more prone to induce DNA damage than Au@LM NPs, which makes the latter type more suitable for further studies in nano-medicine. © 2019.

60 APPLIED LIFE SCIENCES↗

Green synthesis of graphene nanosheets/ZnO composites and electrochemical properties

A green and facile approach was demonstrated to prepare graphene nanosheets/ZnO (GNS/ZnO) composites for supercapacitor materials. Glucose, as a reducing agent, and exfoliated graphite oxide (GO), as precursor, were used to synthesize GNS, then ZnO directly grew onto conducting graphene nanosheets as electrode materials. The small ZnO particles successfully anchored onto graphene sheets as spacers to keep the neighboring sheets separate. The electrochemical performances of these electrodes were analyzed by cyclic voltammetry, electrochemical impedance spectrometry and chronopotentiometry. Results showed that the GNS/ZnO composites displayed superior capacitive performance with large capacitance (62.2 F/g), excellent cyclic performance, and maximum power density (8.1 kW/kg) as compared with pure graphene electrodes. Our investigation highlight the importance of anchoring of small ZnO particles on graphene sheets for maximum utilization of electrochemically active ZnO and graphene for energy storage application in supercapacitors. - Graphical abstract: Glucose was used to synthesize GNS, then ZnO directly grew onto conducting graphene nanosheets as electrode materials for supercapacitor. Results showed that the composites have superior capacitive performance. Highlights: > Graphene nanosheets were synthesized via using glucose as a reducing agent. > The reductant and the oxidized product are environmentally friendly. > ZnO grew onto conducting graphene sheets keeping neighboring sheets separate. > The structure improves the contact between the electrode and the electrolyte. > Results showed that these composites have good electrochemical property.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Green reduction of graphene oxide via Lycium barbarum extract

The synthesis of graphene from graphene oxide (GO) usually involves toxic reducing agents that are harmful to human health and the environment. Here, we report a facile approach for effective reduction of GO, for the first time, using Lycium barbarum extract as a green and natural reducing agent. The morphology and de-oxidation efficiency of the reduced graphene were characterized and results showed that Lycium barbarum extract can effectively reduce GO into few layered graphene with a high carbon to oxygen ratio (6.5), comparable to that of GO reduced by hydrazine hydrate (6.6). The possible reduction mechanism of GO may be due to the active components existing in Lycium barbarum fruits, which have high binding affinity to the oxygen containing groups to form their corresponding oxides and other by-products. This method avoided the use of any nocuous chemicals, thus facilitating the mass production of graphene and graphene-based bio-materials. - Graphical abstract: Schematic illustration of the preparation of reduced graphene by Lycium barbarum extract. - Highlights: • The Lycium barbarum extract was used for the reduction of graphene oxide. • The obtained few layered graphene exhibited high carbon to oxygen ratio. • This approach can be applied in the preparation of graphene-based bio-materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid synthesis of spherical-shaped green-emitting MgGa{sub 2}O{sub 4}:Mn{sup 2+} phosphor via spray pyrolysis

Simple, one-step synthesis of spherical-shaped powder phosphors with aqueous precursors via a spray pyrolysis method is reported. Green-emitting MgGa{sub 2}O{sub 4}:Mn{sup 2+} phosphor with a controlled shape was successfully obtained by spraying under a reductive atmosphere (N{sub 2} + H{sub 2} carrier gas) without high-temperature post-heat treatment. In addition, the corresponding powder phosphors were well dispersed and showed a clean surface morphology compared to an existing cumbersome process using high-temperature post-annealing. The new method may help to prevent surface residual non-radiative defect sites. The result of highly luminescent and spherical morphology, non-aggregated powder phosphor by this procedure holds promise for a cost-effective and rapid synthesis process for conventional inorganic phosphors.

36 MATERIALS SCIENCE↗

Synthesis and anti-bacterial activity of Cu, Ag and Cu-Ag alloy nanoparticles: A green approach

Research highlights: {yields} Synthesis of novel nanosized copper-silver alloys of different compositions. {yields} Completely green approach for synthesis of water soluble bimetallic nanoparticle. {yields} Interesting anti-bacterial activity of as synthesized metal and alloy nanoparticle. -- Abstract: Metallic and bimetallic nanoparticles of copper and silver in various proportions were prepared by microwave assisted chemical reduction in aqueous medium using the biopolymer, starch as a stabilizing agent. Ascorbic acid was used as the reducing agent. The silver and copper nanoparticles exhibited surface plasmon absorption resonance maxima (SPR) at 416 and 584 nm, respectively; while SPR for the Cu-Ag alloys appeared in between depending on the alloy composition. The SPR maxima for bimetallic nanoparticles changes linearly with increasing copper content in the alloy. Transmission electron micrograph (TEM) showed monodispersed particles in the range of 20 {+-} 5 nm size. Both silver and copper nanoparticles exhibited emission band at 485 and 645 nm, respectively. The starch-stabilized nanoparticles exhibited interesting antibacterial activity with both gram positive and gram negative bacteria at micromolar concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dual mode green fluorescence from Tb{sup 3+}:Ca{sub 12}Al{sub 14}O{sub 33} and its applicability as delayed fluorescence

Highlights: ► Synthesis of Yb{sup 3+}/Tb{sup 3+} co-doped Ca{sub 12}Al{sub 14}O{sub 33} phosphor. ► Dual mode emission in green area on excitation with 976 nm and 266 nm. ► Delayed fluorescence on excitation of 266 nm. ► Effect of time on delayed fluorescence. -- Abstract: A Tb{sup 3+}/Yb{sup 3+} doped calcium aluminate phosphor has been synthesized using well known combustion synthesis. The structural characterization and morphology has been studied using X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques. The characteristic luminescence of Tb{sup 3+} in both upconversion and down-conversion modes, i.e. dual mode luminescence has been recorded on excitation with 976 nm and 266 nm radiation. The Stokes emission observed on 266 nm excitation also shows a characteristic of delayed fluorescence. The delayed fluorescence has been measured as a function of time and pump power. It has been correlated to the white light emission (broad continuum emission) from the host. The possible reason of association of electron hole trapping to the defect level as well as in crystal potential is suggested.

36 MATERIALS SCIENCE↗

Green synthesis of silver nanoparticles from aqueous Aegle marmelos leaf extract

Graphical abstract: Silver nanoparticles capped with polyphenols present in Aegle marmelos leaf extract. Display Omitted Highlights: ► Silver nanoparticles are synthesized using Aegle marmelos leaf extract in aqueous media. ► Reduction reaction is fast and occurs at room temperature. ► The presence of polyphenols acts as in situ capping agent. -- Abstract: Synthesis of nanoparticles by green route is an emerging technique drawing more attention recently because of several advantages over the convention chemical routes. The present study reports one-pot synthesis and in situ stabilization of silver nanoparticles using Aegle marmelos leaf extract. Nanoparticles of almost uniform spherical size (∼60 nm) were synthesized within ∼25 min reaction time at room temperature. The size of particles depends on the ratio of AgNO{sub 3} and leaf extract. The crystallinity, size, and shape of the nanoparticles were characterized by X-ray diffraction, dynamic light scattering, and scanning electron microscopy respectively. The size stability was attained by the capping effect of polyphenolic tannin compound, procatacheuate in the extract. The capped polyphenols can be removed from the particle surface by simple NaOH/methanol wash. The involvement of phenolic compounds in metal ion reduction and capping were supported by UV–visible spectroscopy, infrared spectroscopy, high performance liquid chromatography, and zeta potential measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and optical study of green light emitting polymer coated CdSe/ZnSe core/shell nanocrystals

Highlights: ► Synthesis of Polymer coated core CdSe and CdSe/ZnSe core/shell NCs. ► From TEM image, the spherical nature of CdSe and CdSe/ZnSe is obtained. ► Exhibiting green band photoemission peak at 541 nm and 549 nm for CdSe core and CdSe/ZnSe core/shell NCs. ► The shell thickness has been calculated by using superposition of quantum confinement energy model. - Abstract: CdSe/ZnSe Core/Shell NCs dispersed in PVA are synthesized by chemical method at room temperature. This is characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), UV/Vis spectra and photoluminescence spectroscopy (PL). TEM image shows the spherical nature of CdSe/ZnSe core/shell NCs. The red shift of absorption and emission peak of CdSe/ZnSe core/shell NCs as compared to CdSe core confirmed the formation of core/shell. The superposition of quantum confinement energy model is used for calculation of thickness of ZnSe shell.

36 MATERIALS SCIENCE↗

Highly controllable and green reduction of graphene oxide to flexible graphene film with high strength

Graphical abstract: Highly controllable and green reduction of GO to chemical converted graphene (CCG) was achieved with sodium citrate as a facile reductant. Self-assembly of the as-made CCG sheets results in a flexible CCG film, of which the tensile strength strongly depends on the deoxygenation degree of graphene sheets. - Highlights: • Graphene was synthesized by an effective and environmentally friendly approach. • We introduced a facile X-ray diffraction analysis method to investigate the reduction process from graphene oxide to graphene. • Flexible graphene films were prepared by self-assembly of the graphene sheets. • The strength of the graphene films depends on the reduction degree of graphene. - Abstract: Graphene film with high strength was fabricated by the assembly of graphene sheets derived from graphene oxide (GO) in an effective and environmentally friendly approach. Highly controllable reduction of GO to chemical converted graphene (CCG) was achieved with sodium citrate as a facile reductant, in which the reduction process was monitored by XRD analysis and UV–vis absorption spectra. Self-assembly of the as-made CCG sheets results in a flexible CCG film. This method may open an avenue to the easy and scalable preparation of graphene film with high strength which has promising potentials in many fields where strong, flexible and electrically conductive films are highly demanded.

36 MATERIALS SCIENCE↗

Application of glucose as a green capping agent and reductant to fabricate CuI micro/nanostructures

Graphical abstract: - Highlights: • CuI nanostructures were prepared via a simple precipitation method. • Glucose as a green capping agent and reductant was applied. • The effect of glucose concentration on the morphology of CuI was investigated. • According to XRD results, pure cubic phase CuI have been formed by using glucose. - Abstract: In this work, CuI micro/nanostructures have been successfully prepared via a simple precipitation route at room temperature. By using glucose as a clean reducing agent with different concentrations, CuI micro/nanostructures with various morphologies were obtained. Besides glucose, Na{sub 2}SO{sub 3}, KBH{sub 4} and N{sub 2}H{sub 4}·H{sub 2}O have been applied as reductant. X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence spectroscopy, X-ray energy dispersive spectroscopy (EDS) and Fourier transformed infrared (FT-IR) spectroscopy were used to characterize the as-produced CuI micro/nanostructures. According to the XRD results, it was found that pure cubic phase CuI have been formed by using glucose.

36 MATERIALS SCIENCE↗

Green synthesis of boron doped graphene and its application as high performance anode material in Li ion battery

Graphical abstract: Boron doped graphene (B-G), synthesized by simple hydrogen induced reduction technique using boric acid as boron precursor, have more uneven surface as a result of smaller bonding distance of boron compared to carbon, showed high capacity and high rate capability compared to pristine graphene as an anode material for Li ion battery application. - Abstract: The present work demonstrates a facile route for the large-scale, catalyst free, and green synthesis approach of boron doped graphene (B-G) and its use as high performance anode material for Li ion battery (LIB) application. Boron atoms were doped into graphene framework with an atomic percentage of 5.93% via hydrogen induced thermal reduction technique using graphite oxide and boric acid as precursors. Various characterization techniques were used to confirm the boron doping in graphene sheets. B-G as anode material shows a discharge capacity of 548 mAh g{sup −1} at 100 mA g{sup −1} after 30th cycles. At high current density value of 1 A g{sup −1}, B-G as anode material enhances the specific capacity by about 1.7 times compared to pristine graphene. The present study shows a simplistic way of boron doping in graphene leading to an enhanced Li ion adsorption due to the change in electronic states.

36 MATERIALS SCIENCE↗

Mesoporous mixed-phase Ga{sub 2}O{sub 3}: Green synthesis and enhanced photocatalytic activity

Highlights: • Mixed-phase Ga{sub 2}O{sub 3} was synthesized by a facile and green method. • Mixed-phase Ga{sub 2}O{sub 3} exhibited good photocatalytic activity and stability. • The reactive species in the photocatalytic process were investigated. - Abstract: Mesoporous mixed-phase Ga{sub 2}O{sub 3} was synthesized by calcining the GaOOH precursor. The composition, crystal phase and microstructures of Ga{sub 2}O{sub 3} were characterized in detail. The phase composition of the as-prepared Ga{sub 2}O{sub 3} depended on the calcination temperature and the mixed-phase Ga{sub 2}O{sub 3} was obtained at 600–700 °C. As compared to the pure-phase α-Ga{sub 2}O{sub 3} and β-Ga{sub 2}O{sub 3}, the mixed-phase Ga{sub 2}O{sub 3} exhibited an enhanced photocatalytic property for the degradation of metronidazole solution. The heterojunction in the mixed-phase Ga{sub 2}O{sub 3} was beneficial to the separation of photogenerated electrons and holes. Moreover, the mixed-phase Ga{sub 2}O{sub 3} possessed mesopore structure, which increased more reaction sites and was in favor of the contact of metronidazole molecules with reaction sites. The recycling experiments show that the mixed-phase Ga{sub 2}O{sub 3} has good stability and can be separated easily from the reaction system.

36 MATERIALS SCIENCE↗

Green and facile synthesis of graphene nanosheets/K{sub 3}PW{sub 12}O{sub 40} nanocomposites with enhanced photocatalytic activities

Highlights: • A new graphene/K{sub 3}PW{sub 12}O{sub 40} (GPW) composite was synthesized via photoreduction method. • Graphene in the GPW could reduce the recombination of electron-hole pairs. • Graphene in the GPW could increase adsorptive property. • GPW hybrid shows an enhancement photocatalytic activity. - Abstract: K{sub 3}PW{sub 12}O{sub 40} is a promising polyoxometalate photocatalyst for the removal of organic pollutants from water. However, two main disadvantages of poor adsorptive performance and high recombination rate of photogenerated electron-hole pair hinder its practical applications. In this paper, a new graphene nanosheets/K{sub 3}PW{sub 12}O{sub 40} nanocomposite has been synthesized via a green photoreduction strategy, being low-cost and scalable production. Characterizations show that K{sub 3}PW{sub 12}O{sub 40} nanoparticles with 60 nm or so have been successfully deposited on the graphene nanosheets. As a kind of photocatalyst, the binary graphene nanosheets/K{sub 3}PW{sub 12}O{sub 40} nanocomposite displays improved photocatalytic activity compared to pure K{sub 3}PW{sub 12}O{sub 40}. This improvement is ascribed to the introduction of graphene nanosheets in the nanocomposite, which could increase adsorptive property and reduce the recombination of electron-hole pairs.

36 MATERIALS SCIENCE↗