Development of a theory of the spectral reflectance of minerals, part 2
Theory of diffuse reflectance of particulate media including garnet, glass, corundum powders, and mixtures
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Theory of diffuse reflectance of particulate media including garnet, glass, corundum powders, and mixtures
Materials suitable for use in magnetic bubble domain memories were developed for aerospace applications. Practical techniques for the preparation of such materials in forms required for fabrication of computer memory devices were considered. The materials studied were epitaxial films of various compositions of the gallium-substituted yttrium gadolinium iron garnet system. The major emphasis was to determine their bubble properties and the conditions necessary for growing uncracked, high quality films.
The compressional velocities are estimated for materials in the lunar interior and compared with lunar seismic results. The lower crust has velocities appropriate for basalts or anorthosites. The high velocities associated with the uppermost mantle imply high densities and a change in composition to a lighter assemblage at depths of the order of 120 km. Calcium and aluminum are probably important components of the upper mantle and are deficient in the lower mantle. Much of the moon may have accreted from material similar in composition to eucrites. The important mineral of the upper mantle is garnet; possible accessory minerals are kyanite, spinel, and rutile. If the seismic results stand up, the high velocity layer in the moon is more likely to be a high pressure form of anorthosite than eclogite, pyroxenite, or dunite. The thickness of the layer is of the order of 50 km. Cosmic abundances can be maintained if the lower mantle is ferromagnesium silicate with minimal amounts of calcium and aluminum. Achondrites such as eucrites and howardites have more of the required characteristics of the lunar interior than carbonaceous chondrites. A density inversion in the moon is a strong possibility.
Five nodules of eclogite, one nodule of garnet peridotite, and one sample of kimberlite from the Roberts Victor Mine in the Orange Free State were analyzed for concentrations of U, Th, Pb, Rb, and Sr, and also isotopic compositions of Pb and Sr. Results are presented and analyzed. They indicate that the Roberts Victor eclogites have been contaminated by lead from the host rock of kimberlite. This finding suggests that stepwise extraction of lead may be a means of obtaining the isotopic composition of the primary lead in kimberlitic eclogites.
Of particular interest among minerals recently discovered in meteorites are five phosphate minerals, three of them unknown in terrestrial rocks; a chromium nitride and a silicon oxynitride; lonsdaleite and chaoite, new polymorphs of carbon; ringwoodite and majorite, the spinel and garnet analogs of olivine and pyroxene, respectively; a number of calcium- and aluminum-rich silicates in the Allende meteorite, a type III carbonaceous chondrite which fell in 1969; and several alkali-rich silicates found as inclusions in iron meteorites. Knowledge of the compositional range of the common minerals olivine, pyroxene, and plagioclase has also been greatly increased by recent researches.
The effects of various oxide additives on the volume change on melting, the surface tension, and the viscosity of liquid Al2O3 were studied. Additives of Sm2O3, MgO, and Y2O3 which form solid solutions, compounds, and multiphase solids with Al2O3 were studied. A review of the property data for Al2O3 and Al2O3 containing oxide additives is presented. Oxide additives to Al2O3 reduce the volume change on melting and with the exception of SiO2 lower the viscosity; surface tensions change with oxide additives, but changes vary with different container material. Viscosity and volume change on melting appeared to be significantly more important for studying the properties of liquid oxides than surface tension. Supercooling of 270 K of yttrium aluminum garnet was observed.
Liquid phase epitaxy spacing layer is compatible with systems which are hard-bubble proofed by use of second magnetic garnet film as capping layer. Composite is superior in that: circuit fabrication time is reduced; adherence is superior; visibility is better; and, good match of thermal expansion coefficients is provided.
The compressional velocities are estimated for materials thought to be important in the lunar interior and compared with lunar seismic results. The lower lunar crust has velocities appropriate for basalts or anorthosites. Anorthosite is preferred if lunar basalts result from a small degree of partial melting. The high velocities associated with the uppermost mantle imply high densities and a change to a lighter assemblage at depths of the order of 120 km. Ca- and Al-rich minerals are important components of both the lower crust and the upper mantle. Most of the moon may have accreted from refractory material rich in Ca, Al, U, and the rare-earth elements. The important mineral of the upper mantle is garnet; possible accessory minerals are kyanite, spinel and rutile. If the seismic results stand up, the high-velocity layer in the moon is more likely to be a high-pressure form of anorthosite than eclogite, pyroxenite, or dunite.
The design of a high temperature furnace is presented which uses electrically conducting ceramic oxide heating elements. The heating elements are made of either thoria or stabilized zirconia which become conductive when preheated to 700 to 1000 C. These heater elements can be operated to 2200 C in oxidizing or inert atmospheres. The furnace is being designed to have a temperature which can be controlled to within 11 C. By a replacement of the heater element, the working cavity can be changed from isothermal to a cavity with a selected specific axial temperature gradient of up to 200 C per centimeter. This furnace concept is appropriate for the growth of crystals which might be grown best in an oxidizing atmosphere such as sapphire (melting point 2040 C), yttrium aluminum garnet (1970 C) or yttrium orthoaluminate (1875 C).
Grossular garnet has been observed in several white inclusions in the Allende meteorite. Compositions range from Gro(95)Py(5) to Gro(88)Py(12) in five inclusions. Its mottled appearance indicates that it crystallized from a glass of near-grossular composition and not by a solid-state reaction between wollastonite, anorthite, and melilite. These grossular-bearing inclusions either condensed directly as metastable liquids from the solar nebula or, if initial solid condensates were liquefied, by some subsequent heating process. In either case, a prolonged residence time in a thermal blanket appears necessary to effect crystallization of the grossular.
The fabrication yield of an on-chip modifiable redundant circuit design for a 100M bit serial shift register is evaluated. The yield model is a redundancy design in which there is a primary loop and a set of secondary loops which can be enabled/disabled without introducing blanks to the data stream. This function has a finite yield, the loop-modification yield factor, which must be greater than 0.9 to make the system more economical than the simple nonredundant design. It is further established that small loop capacities greatly degrade the yield because of the effect of the modification yield factor, while large loop capacities degrade the yield because of defects in the operating area. As the modification yield increases the optimum loop capacity decreases. An optimum value for the number of redundant loops exists for each loop capacity. Other factors that affect the yield are the garnet film and the processed circuit.
Lorentz line parameters (and estimates of their standard deviations) have been empirically derived from measured reflectance data for muscovite mica, an anorthosite, a diopsidic pyroxenite, an almandite-pyrope garnet, and a soda lime glass. These parameters provide a useful starting point for computer calculations requiring optical constants as a function and are therefore given here. A novel method of fitting the reflectance data by least squares is described in detail, as is the statistical procedure for estimating the standard deviations of the parameters found.
The petrography and mineral chemistry of volcanic rocks from the Igwisi Hills in Tanzania are discussed. There is considerable evidence to suggest that the Igwisi rocks are extrusive kimberlites: a two-component nature with high P-T minerals in a low P-T matrix; the presence of chrome pyrope, Al enstatite, chrome diopside, chromite and olivine; a highly oxidized, volatile-rich matrix with serpentine, calcite, magnetite, perovskite; high Sr, Zr, and Nb contents; occurrence in a narrow isolated vent within a stable shield area. The Igwisi rocks differ from kimberlite in the lack of magnesian ilmenite, the scarcity of matrix phlogopite, and the overall low alkali content. They apparently contain material from phlogopite-bearing garnet peridotites with a primary mineral assemblage indicative of equilibrium at upper mantle temperatures and pressures. This primary assemblage was brought rapidly to the surface in a gas-charged, carbonate-rich fluid. Rapid upward transport, extrusion, and rapid cooling have tended to prevent reaction between inclusions and the carbonate-rich matrix that might otherwise have yielded a more typical kimberlite.
Experiments were devised to study the angular variation of the resistance and noise properties of one- and two-level chevron stretcher magnetoresistive detectors for use in field access bubble memory devices. All measurements, made with an electronic system, were performed on glass or garnet samples upon which 1 micron of SiO2 was sputter-deposited, followed by 4000 A of Permalloy for the 28-micron-period devices and 0.8 microns of SiO2, followed by 3000 A of Permalloy for the 20-micron-period devices. The geometrical and drive-state dependence of the zero-state noise were studied, as was its frequency dependence. It is found that both types of detectors operate primarily in the amplitude-shift mode for drive fields of interest and that the presence of a bubble in a detector causes a magnetoresistance change equal to that produced by increasing the in-plane drive field about 8 Oe in the absence of a bubble.
The paper reports activation-analysis determinations of rare-earth-element (REE) and other trace-element concentrations in selected rocks, plagioclase, and mafic separates from the Fiskenaesset Complex. The REE abundances are found to be very low and atypical in comparison with other terrestrial anorthosites. The plagioclases are shown to be characterized by a deficiency in heavy RE elements relative to light ones and a positive Eu anomaly, while the mafic separates are enriched in heavy rare earths and have no Eu anomaly, except in one sample. It is found that the bulk and trace-element abundances of the plagioclases are similar to those observed in some lunar anorthosites, but the degree of Eu anomaly is less in the plagioclases. The data are taken as confirmation of the idea that fractionation processes were involved in the origin of the Complex, and it is concluded that the Complex may have been produced from a magma generated by partial melting of a garnet-bearing source.
Descriptions are given of the petrochemistry of two Apennine Front breccias, both ejected to the surface during excavation of Spur Crater. The first clast type is breccia number 15445, a spinel pyroxenite whose mineralogy and petrochemistry are consistent with the original rock type being a garnet pyroxenite. The second rock, breccia 15459, is plutonic norite, in which coarsely exsolved inverted pigeonite is associated with anorthitic plagioclase. Application of mineral geothermometers indicates crystallization of these rocks below 1100 C; hence their textures probably developed largely by solid state recrystallization during impact-metamorphism.
The operation of mechanical and thermal strippers and the early development of laser wire strippers are reviewed. NASA sponsored development of laser wire stripping for space shuttle includes bench-type strippers as well as an advanced portable hand-held stripper which incorporates a miniaturized carbon dioxide laser and a rotating optics unit with a gas-jet assist and debris exhaust. Drives and controls girdle the wire and slit the remaining slug without manual assistance. This unit can strip wire sizes 26 through 12 gage. A larger-capacity hand-held unit for wire sizes through 1/0 gage was built using a neodynium-doped yttrium aluminum garnet (Nd:YAG) laser. The hand-held units have a flexible umbilical cable to an accompanying cart that carries the power supply, gas supply, cooling unit, and the controls.
We have measured the two-photon photoemission current density from tungsten, tantalum, and molybdenum when irradiated by 532-nm wavelength radiation. This wavelength was produced by the second-harmonic radiation of single picosecond laser pulses from a mode-locked neodymium-doped yttrium-aluminum-garnet laser. The results are interpreted in terms of both a simple temperature-independent two-photon photoemission effect and a generalization of the Fowler-DuBridge theory of photoemission. The laser polarization dependence of the emitted current is also reported.