Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Focuses”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Fine-structure characteristics in the emittance images of a strongly focusing He{sup +} beam

The phase space distribution of a strongly focused He{sup +} ion beam source equipped with concave multiaperture electrodes was measured using a pepper-pot plate and a Kapton foil. The substructure of 301 merging He beamlets was clearly observed on a footprint of pepper-pot hole at the beam waist, where the beam density was 500 mA/cm{sup 2}. The position and the width of each beamlet substructure show the effect of interference of beamlets with surrounding one.

43 PARTICLE ACCELERATORS↗

Tailoring a plasma focus as hard x-ray source for imaging

An investigation on temporal and spatial properties of hard x-rays (15-88 keV) emitted in a 5.3 kJ plasma focus using Si pin diodes and a pinhole camera is reported. The maximum yield of hard x-rays of 15-88 keV range is estimated about 4.7 J and corresponding efficiency for x-ray generation is 0.09%. The x-rays with energy >15 keV have 15-20 ns pulse duration and approx1 mm source size. This radiation is used for contact x-ray imaging of biological and compound objects and spatial resolution of approx50 mum is demonstrated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In situ determination of the static inductance and resistance of a plasma focus capacitor bank

The static (unloaded) electrical parameters of a capacitor bank are of utmost importance for the purpose of modeling the system as a whole when the capacitor bank is discharged into its dynamic electromagnetic load. Using a physical short circuit across the electromagnetic load is usually technically difficult and is unnecessary. The discharge can be operated at the highest pressure permissible in order to minimize current sheet motion, thus simulating zero dynamic load, to enable bank parameters, static inductance L{sub 0}, and resistance r{sub 0} to be obtained using lightly damped sinusoid equations given the bank capacitance C{sub 0}. However, for a plasma focus, even at the highest permissible pressure it is found that there is significant residual motion, so that the assumption of a zero dynamic load introduces unacceptable errors into the determination of the circuit parameters. To overcome this problem, the Lee model code is used to fit the computed current trace to the measured current waveform. Hence the dynamics is incorporated into the solution and the capacitor bank parameters are computed using the Lee model code, and more accurate static bank parameters are obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design and construction of pulsed neutron diagnostic system for plasma focus device (SBUPF1)

In this paper, two designs of pulsed neutron counter structure are introduced. To increase the activation counter efficiency, BC-400 plastic scintillator plates along with silver foils are utilized. Rectangular cubic and cylindrical geometries for activation counter cell are modeled using MCNP4C code. Eventually, an optimum length of 14 cm is calculated for the detector cell and optimum numbers of 20 silver foils for rectangular cubic geometry and ten foils for cylindrical geometry have been acquired. Due to the high cost of cutting, polishing of plastics, and etc., the rectangular cubic design is found to be more economical than the other design. In order to examine the functionality and ensure the detector output and corresponding designing, neutron yield of a 2.48 kJ plasma focus device (SBUPF1) in 8 mbar pressure with removal source method for calibration was measured (3.71{+-}0.32)x10{sup 7} neutrons per shot.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Fabrication and Characterization of Elliptically-Curved, Laterally-Graded Multilayers for Focusing X-ray Polychromator Applications

We have developed a novel X-ray multilayer working as a focusing polychromator. A multilayer mirror enables independent designs of the focal length and the spectral dispersion, and much higher throughput than the curved crystal. Our ion beam sputtering deposition apparatus has a speed programmable shuttering system for control of the lateral thickness gradient. A SiC/C and three V/C multilayers were deposited on each 150 mm long Si wafers. Period thicknesses are tuned to the designed energy of 5-12 keV, 12-19 keV, 19-26 keV and 26-33 keV, respectively. Four multilayers were clamped to form a 600 mm long 5-33 keV range elliptic mirror on a shaped Cu base plate. The focal length is 700 mm, which is large enough for setups around the sample position. The energy calibration was performed at BL-15C of the Photon Factory based on absorption edges of metal foils, which was in good agreement with the period thickness measured by a laboratory X-ray diffractometer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A KB-Focusing Mirror Pair for a VUV-Raman Spectrometer at FLASH - Mirror Metrology and Ray Tracing Results

A plane mirror and two strongly curved plane elliptical mirrors comprising the refocusing system downstream the plane grating monochromator at FLASH in DESY have been characterized with the Nanometer Optical Component Measuring Machine at the BESSY-II Optics Laboratory of the Helmholtz Zentrum Berlin. Based on the measurement results the two elliptical cylinders were optimized by deterministic surface finishing technology (Ion Beam Finishing). The expected focusing performance was verified by ray tracings after each ion beam finish iteration using the measured topography results.

43 PARTICLE ACCELERATORS↗

Application of a Bonner sphere spectrometer for determination of the energy spectra of neutrons generated by {approx_equal}1 MJ plasma focus

The spectra of neutrons outside the plasma focus device PF-1000 with an upper energy limit of {approx_equal}1 MJ was measured using a Bonner spheres spectrometer in which the active detector of thermal neutrons was replaced by nine thermoluminescent chips. As an a priori spectrum for the unfolding procedure, the spectrum calculated by means of the Monte Carlo method with a simplified model of the discharge chamber was selected. Differences between unfolded and calculated spectra are discussed with respect to properties of the discharge vessel and the laboratory layout.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Longitudinal Confinement of an Intense Beam Using Induction Focusing

Induction focusing is successfully used to confine a space-charge dominated beam for over 11.52 km, or more than 1000 turns in a 3.66 m-diameter ring with the periodic application of longitudinal fields to overcome the defocusing space-charge forces.

43 PARTICLE ACCELERATORS↗

Note: A portable pulsed neutron source based on the smallest sealed-type plasma focus device

Development and operation of a portable and compact pulsed neutron source based on sealed-type plasma focus (PF) device are reported. The unit is the smallest sealed-type neutron producing PF device. The effective volume of the PF unit is 33 cm{sup 3} only. A compact size single capacitor (4 {mu}F) is used as the energy driver. A battery based power supply unit is used for charging the capacitor and triggering the spark gap. The PF unit is operated at 10 kV (200 J) and at a deuterium gas filling pressure of 8 mb. The device is operated over a time span of 200 days and the neutron emissions have been observed for 200 shots without changing the gas in between the shots. The maximum yield of this device is 7.8 x 10{sup 4} neutrons/pulse. Beyond 200 shots the yield is below the threshold (1050 neutrons/pulse) of our {sup 3}He detector. The neutron energy is evaluated using time of flight technique and the value is (2.49 {+-} 0.27) MeV. The measured neutron pulse width is (24 {+-} 5) ns. Multishot and long duration operations envisage the potentiality of such portable device for repetitive mode of operation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Experimental evidence of thermonuclear neutrons in a modified plasma focus

The PF-1000 plasma focus was modified by adding the cathode disk 3 cm in front of the anode. This modification facilitated the evaluation of neutron energy spectra. Two neutron pulses were distinguishable. As regards the first neutron pulse, it lasted 40 ns during the plasma stagnation and it demonstrated high isotropy of neutron emission. A peak neutron energy detected upstream was 2.46{+-}0.02 MeV. The full width of neutron energy spectra of 90{+-}20 keV enabled to calculate an ion temperature of 1.2 keV. These parameters and a neutron yield of 10{sup 9} corresponded to theoretical predictions for thermonuclear neutrons.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Energetic Ion Beam Production by a Low-Pressure Plasma Focus Discharge

Energetic ion beam emissions in a 3 kJ Mather type plasma focus operating at low-pressure regime are investigated. Deuterium gas is used and the discharge is operated in a low-pressure regime of below 1 mbar. Formation of the current sheath during the breakdown phase at the back wall is assisted by a set delayed trigger pulse. Energetic and intense ion beams with good reproducibility have been obtained for the operating pressure ranging from 0.05 mbar to 0.5 mbar. Deuteron beam is determined by time resolved measurement by making use of three biased ion collectors placed at the end on direction. The average energies of deuteron beams are resolved by using time-of flight method. Correlation between the ion emissions and the current sheath dynamics is also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Generalized Courant-Snyder theory and Kapchinskij-Vladimirskij distribution for high-intensity beams in a coupled transverse focusing lattice

The Courant-Snyder (CS) theory and the Kapchinskij-Vladimirskij (KV) distribution for high-intensity beams in an uncoupled focusing lattice are generalized to the case of coupled transverse dynamics. The envelope function is generalized to an envelope matrix, and the envelope equation becomes a matrix envelope equation with matrix operations that are noncommutative. In an uncoupled lattice, the KV distribution function, first analyzed in 1959, is the only known exact solution of the nonlinear Vlasov-Maxwell equations for high-intensity beams including self-fields in a self-consistent manner. The KV solution is generalized to high-intensity beams in a coupled transverse lattice using the generalized CS invariant. This solution projects to a rotating, pulsating elliptical beam in transverse configuration space. The fully self-consistent solution reduces the nonlinear Vlasov-Maxwell equations to a nonlinear matrix ordinary differential equation for the envelope matrix, which determines the geometry of the pulsating and rotating beam ellipse. These results provide us with a new theoretical tool to investigate the dynamics of high-intensity beams in a coupled transverse lattice. A strongly coupled lattice, a so-called N-rolling lattice, is studied as an example. It is found that strong coupling does not deteriorate the beam quality. Instead, the coupling induces beam rotation and reduces beam pulsation.

43 PARTICLE ACCELERATORS↗

Self-focusing of a Gaussian electromagnetic beam in a complex plasma

This paper analyzes the propagation of a Gaussian electromagnetic beam in a complex plasma; the paraxial approach has been invoked for the study of the propagation characteristics. The analytical model emphasizes the open nature of complex plasmas and incorporates the charge, number density, and energy balance of the plasma constituents along with the plasma neutrality. Diffusion due to the density and temperature gradients, thermal conduction, Ohmic heating, and energy exchange in collisions/accretion have also been taken into account. For a numerical appreciation of the results, the critical curves for the propagation of the beam in dark plasmas have been discussed. The dependence of the beam width parameter on distance of propagation has been evaluated for three typical cases viz., of steady divergence, oscillatory divergence, and self-focusing. The equality of electron and ion density, an assumption inherent in the earlier analysis, has been discarded on account of the presence of charged dust particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Focusing of intense subpicosecond laser pulses in wedge targets

Two dimensional particle-in-cell simulations characterizing the interaction of ultraintense short pulse lasers in the range 10{sup 18} {<=} I {<=} 10{sup 20} W/cm{sup 2} with converging target geometries are presented. Seeking to examine intensity amplification in high-power laser systems, where focal spots are typically non-diffraction limited, we describe key dynamical features as the injected laser intensity and convergence angle of the target are systematically varied. We find that laser pulses are focused down to a wavelength with the peak intensity amplified by an order of magnitude beyond its vacuum value and develop a simple model for how the peak location moves back towards the injection plane over time. This performance is sustained over hundreds of femtoseconds and scales to laser intensities beyond 10{sup 20} W/cm{sup 2} at 1 {mu}m wavelength.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of ionization distribution on plasma beam focusing characteristics in Hall thrusters

The relationship between ionization distribution and divergence of plasma beam in a Hall thruster is investigated using spectrum and probe methods. Experimental results indicate that the shift of ionization region towards the exit of channel causes the reduction of accelerating field and the enhancement of electron thermal pressure effect, which result in further deviation of equipotential lines to magnetic field lines and further increase in divergence of plasma beam. It is, therefore, suggested that to put the ionization region deep inside the channel and separate it from the acceleration region at the design, and development stage is helpful to improve the plasma beam focusing characteristics of a Hall thruster.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Use of the focusing multi-slit ion optical system at RUssian Diagnostic Injector (RUDI)

The upgrade of the diagnostic neutral beam injector RUDI in 2010 was performed to increase the beam density at the focal plane in accordance with the requirements of charge-exchange recombination spectroscopy diagnostics. A new focusing ion-optical system (IOS) with slit beamlets and an enlarged aperture was optimized for 50% higher nominal beam current and reduced angular divergence with respect to the previous multi-aperture IOS version. The upgraded injector provides the beam current up to 3 A, the measured beam divergence in the direction along the slits is 0.35 deg. Additionally, the plasma generator was modified to extend the beam pulse to 8 s.

43 PARTICLE ACCELERATORS↗

Observation of a strong correlation between electromagnetic soliton formation and relativistic self-focusing for ultra-short laser pulses propagating through an under-dense plasma

A strong correlation is observed between the formation of electromagnetic solitons, generated during the interaction of a short intense laser pulse (30 fs, {approx}10{sup 18} W/cm{sup 2}) with a rarefied (<0.1n{sub c}) plasma, and pulse self-focusing. Pulse defocusing, which occurs after soliton generation, results in laser-pulse energy depletion. The role of stimulated Raman scattering in soliton generation is analyzed from 2D particle-in-cell simulations. An observed relationship between initial plasma density and soliton generation is presented that might have relevance to wake-field accelerators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Plasma focus ion beam fluence and flux-Scaling with stored energy

Measurements on plasma focus ion beams include various advanced techniques producing a variety of data which has yet to produce benchmark numbers [A Bernard et al., J. Mosc. Phys. Soc. 8, 93-170 (1998)]. This present paper uses the Lee Model code [S Lee, http://www.plasmafocus.net (2012)], integrated with experimental measurements to provide the basis for reference numbers and the scaling of deuteron beams versus stored energy E{sub 0}. The ion number fluence (ions m{sup -2}) and energy fluence (J m{sup -2}) computed as 2.4-7.8 Multiplication-Sign 10{sup 20} and 2.2-33 Multiplication-Sign 10{sup 6}, respectively, are found to be independent of E{sub 0} from 0.4 to 486 kJ. Typical inductance machines (33-55 nH) produce 1.2-2 Multiplication-Sign 10{sup 15} ions per kJ carrying 1.3%-4% E{sub 0} at mean ion energy 50-205 keV, dropping to 0.6 Multiplication-Sign 10{sup 15} ions per kJ carrying 0.7% E{sub 0} for the high inductance INTI PF.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗