Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flow dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Approximate constants of motion for classically chaotic vibrational dynamics - Vague tori, semiclassical quantization, and classical intramolecular energy flow

Substantial short time regularity, even in the chaotic regions of phase space, is found for what is seen as a large class of systems. This regularity manifests itself through the behavior of approximate constants of motion calculated by Pade summation of the Birkhoff-Gustavson normal form expansion; it is attributed to remnants of destroyed invariant tori in phase space. The remnant torus-like manifold structures are used to justify Einstein-Brillouin-Keller semiclassical quantization procedures for obtaining quantum energy levels, even in the absence of complete tori. They also provide a theoretical basis for the calculation of rate constants for intramolecular mode-mode energy transfer. These results are illustrated by means of a thorough analysis of the Henon-Heiles oscillator problem. Possible generality of the analysis is demonstrated by brief consideration of classical dynamics for the Barbanis Hamiltonian, Zeeman effect in hydrogen and recent results of Wolf and Hase (1980) for the H-C-C fragment.

Shirts, R. B.↗
NASA NTRS2024

Applications of ArcticDEM for measuring volcanic dynamics, landslides, retrogressive thaw slumps, snowdrifts, and vegetation heights

Topographical changes are of fundamental interest to a wide range of Arctic science disciplines faced with the need to anticipate, monitor, and respond to the effects of climate change, including geohazard management, glaciology, hydrology, permafrost, and ecology. This study demonstrates several geomorphological, cryospheric, and biophysical applications of ArcticDEM – a large collection of publicly available, time-dependent digital elevation models (DEMs) of the Arctic. Our study illustrates ArcticDEM's applicability across different disciplines and five orders of magnitude of elevation derivatives, including measuring volcanic lava flows, ice cauldrons, post-failure landslides, retrogressive thaw slumps, snowdrifts, and tundra vegetation heights. We quantified surface elevation changes in different geological settings and conditions using the time series of ArcticDEM. Following the 2014–2015 Bárðarbunga eruption in Iceland, ArcticDEM analysis mapped the lava flow field, and revealed the post-eruptive ice flows and ice cauldron dynamics. The total dense-rock equivalent (DRE) volume of lava flows is estimated to be (1431 ± 2) million m 3 . Then, we present the aftermath of a landslide in Kinnikinnick, Alaska, yielding a total landslide volume of (400 ± 8) × 103 m 3 and a total area of 0.025 km 2 . ArcticDEM is further proven useful for studying retrogressive thaw slumps (RTS). The ArcticDEM-mapped RTS profile is validated by ICESat-2 and drone photogrammetry resulting in a standard deviation of 0.5 m. Volume estimates for lake-side and hillslope RTSs range between 40,000 ± 9000 m 3 and 1,160,000 ± 85,000 m 3 , highlighting applicability across a range of RTS magnitudes. A case study for mapping tundra snow demonstrates ArcticDEM's potential for identifying high-accumulation, late-lying snow areas. The approach proves effective in quantifying relative snow accumulation rather than absolute values (standard deviation of 0.25 m, bias of −0.41 m, and a correlation coefficient of 0.69 with snow depth estimated by unmanned aerial systems photogrammetry). Furthermore, ArcticDEM data show its feasibility for estimating tundra vegetation heights with a standard deviation of 0.3 m (no bias) and a correlation up to 0.8 compared to the light detection and ranging (LiDAR). The demonstrated capabilities of ArcticDEM will pave the way for the broad and pan-Arctic use of this new data source for many disciplines, especially when combined with other imagery products. The wide range of signals embedded in ArcticDEM underscores the potential challenges in deciphering signals in regions affected by various geological processes and environmental influences.

Chunli Dai↗
NASA NTRS1969

Hypersonic gas dynamics of slender bodies

Hypersonic flow past slender bodies, discussing inviscid flows, outer edge singularity of boundary layer and three dimensional interaction on needle- like bodies

Cheng, H. K.↗
NASA NTRS1972

Partially ionized gas flow and heat transfer in the separation, reattachment, and redevelopment regions downstream of an abrupt circular channel expansion.

Heat transfer and pressure measurements obtained in the separation, reattachment, and redevelopment regions along a tube and nozzle located downstream of an abrupt channel expansion are presented for a very high enthalpy flow of argon. The ionization energy fraction extended up to 0.6 at the tube inlet just downstream of the arc heater. Reattachment resulted from the growth of an instability in the vortex sheet-like shear layer between the central jet that discharged into the tube and the reverse flow along the wall at the lower Reynolds numbers, as indicated by water flow visualization studies which were found to dynamically model the high-temperature gas flow. A reasonably good prediction of the heat transfer in the reattachment region where the highest heat transfer occurred and in the redevelopment region downstream can be made by using existing laminar boundary layer theory for a partially ionized gas. In the experiments as much as 90 per cent of the inlet energy was lost by heat transfer to the tube and the nozzle wall.

Back, L. H.↗
NASA NTRS1976

The oblique impingement of an axisymmetric jet

The mechanics of the oblique impingement of an axisymmetric jet on a plane surface are examined in detail. The stagnation point is discussed. A schematic drawing of the problem and coordinate system used to describe the flow field are given. The kinematic features of the flow above the plate are examined in the context of the conservation of mass, the vorticity of the jet, and the vorticity introduced by the jetplate interaction. The dynamic features of the flow are examined in terms of the surface pressure distribution and the cause-effect relationships which exist between the pressure and velocity/vorticity distributions. Flow calculations performed are given. The investigation is relevant to the flow resulting from the interaction of the propulsion jet with the main airfoil (STOL aircraft), and is appropriate to an over- or under- wing configuration.

Foss, J. F.↗
NASA NTRS1979

Two-dimensional zonal mean flow model

The interactions of dynamics, photochemistry and radiation in the stratosphere can be described by the continuity, momentum, and energy equations. A more comprehensive model for stratospheric transport theory was developed for the purpose of aiding predictions of changes in the stratospheric ozone content as a consequence of natural and anthropogenic processes. This model is time dependent and the dependent variables are zonal means of the relevant meteorological quantities which are functions of latitude and height. The detailed formulation of a numerical model both in physics and mathematics is given. A set of fundamental dynamical equations, and the numerical method used in the integration are described.

Chen, H. C.↗
NASA NTRS1980

Vortex pairing in a circular jet under controlled excitation. I - General jet response. II - Coherent structure dynamics

Hot-wire and flow visualization studies were performed in three air jets subjected to pure-tone excitation. The instability, vortex roll-up, and transition to the controlled excitation were investigated. The conditions most favorable to vortex parting were determined as a function of the excitation Strouhal number, the Reynolds number, and the initial shear-layer state; it was shown that the rolled-up vortex rings undergo pairing under 'the shear layer mode', and the 'jet-column mode' when the Strouhal numbers based on the initial shear-layer momentum thickness are 0.012 and 0.85, respectively. Coherent ring-like vortical structures could be educed to the end of the potential core; however, the paired vortex becomes weaker with increasing downstream distances. The transverse transport of 'u' momentum by the coherent structures was much larger during the pairing process than in regions where a single vortex is studied.

Zaman, K. B. M. Q.↗
NASA NTRS1989

Development and validation of CNS (compressible Navier-Stokes) for hypersonic external flows

CNS, a new computational fluid dynamics procedure, has been developed to aid in hypersonic vehicle design. The code can be used to model the entire external flow around hypersonic vehicle shapes, from the captured shock at the nose to the beginning of the wake. Unlike space-marching codes, the technique allows axially separated flow regions to be modeled. Validation trials using sphere-cone data reveal good solution accuracy for the surface pressure and flowfield temperature.

Flores, Jolen↗
NASA NTRS1990

Development of comprehensive numerical schemes for predicting evaporating gas-droplets flow processes of a liquid-fueled combustor

An existing Computational Fluid Dynamics code for simulating complex turbulent flows inside a liquid rocket combustion chamber was validated and further developed. The Advanced Rocket Injector/Combustor Code (ARICC) is simplified and validated against benchmark flow situations for laminar and turbulent flows. The numerical method used in ARICC Code is re-examined for incompressible flow calculations. For turbulent flows, both the subgrid and the two equation k-epsilon turbulence models are studied. Cases tested include idealized Burger's equation in complex geometries and boundaries, a laminar pipe flow, a high Reynolds number turbulent flow, and a confined coaxial jet with recirculations. The accuracy of the algorithm is examined by comparing the numerical results with the analytical solutions as well as experimented data with different grid sizes.

Chen, C. P.↗
NASA NTRS1991

Experiments To Verify Computed Flows

Technical memorandum discusses role of experiments in development of computational fluid dynamics (CFD) for prediction of aerodynamic flows.

Marvin, Joseph G.↗
NASA NTRS1993

A survey of particle image velocimetry applications in Langley aerospace facilities

This paper describes several applications of the global velocity measurement technique known as particle image velocimetry to three different facilities at Langley Research Center. These three applications represent global velocity measurements in distinctly different flows, namely a reacting hydrogen - air flame, a low Reynolds number boundary layer, and hypersonic flow over a wedge. In addition, these applications illustrate the power of the instrument to obtain data such as vorticity and Reynolds stress. Finally, the ability to obtain particle dynamics data in supersonic/hypersonic flows similar to that which can be obtained with point measurement techniques is demonstrated.

Humphreys, W. M.↗
NASA NTRS1974

A new formulation of the conservation equations of fluid dynamics

The computation of time-dependent flows has inspired a new, higher-dimensional formulation of the conservation equations of fluid dynamics in which time is treated as a fourth coordinate. The formulation is derived for a constant-density flow, and then extended to a variable-density flow by introducing a fifth, fictitious coordinate. This new coordinate can also act as a source coordinate, so that external source terms can be included. The analysis is carried out for both incompressible, stratified flow, and compressible equilibrium flow. The results are then extended to non-equilibrium and magnetohydrodynamic flows. Several applications of the new formulation to the computation of time-dependent flows are discussed.

Vinokur, M.↗
NASA NTRS2008

The Development of Point Doppler Velocimeter Data Acquisition and Processing Software

In order to develop efficient and quiet aircraft and validate Computational Fluid Dynamic predications, aerodynamic researchers require flow parameter measurements to characterize flow fields about wind tunnel models and jet flows. A one-component Point Doppler Velocimeter (pDv), a non-intrusive, laser-based instrument, was constructed using a design/develop/test/validate/deploy approach. A primary component of the instrument is software required for system control/management and data collection/reduction. This software along with evaluation algorithms, advanced pDv from a laboratory curiosity to a production level instrument. Simultaneous pDv and pitot probe velocity measurements obtained at the centerline of a flow exiting a two-inch jet, matched within 0.4%. Flow turbulence spectra obtained with pDv and a hot-wire detected the primary and secondary harmonics with equal dynamic range produced by the fan driving the flow. Novel,hardware and software methods were developed, tested and incorporated into the system to eliminate and/or minimize error sources and improve system reliability.

Cavone, Angelo A.↗
NASA NTRS1987

A study of the adequacy of quasi-geostrophic dynamics for modeling the effect of frontal cyclones on the larger scale flow

The evolution of individual cyclone waves is studied in order to see how well quasi-geostrophic (QG) dynamics can simulate the behavior of primitive equations (PE) dynamics. This work is an extension of a similar study (Mudrick, 1982); emphasis is placed here on adding a frontal zone and other more diverse features to the basic states used. In addition, sets of PE integrations, with and without friction, are used to study the formation of surface occluded fronts within the evolving cyclones. Results of the study are summarized at the beginning of the report.

Mudrick, Stephen↗
NASA NTRS1987

The use of computers for instruction in fluid dynamics

Applications for computers which improve instruction in fluid dynamics are examined. Computers can be used to illustrate three-dimensional flow fields and simple fluid dynamics mechanisms, to solve fluid dynamics problems, and for electronic sketching. The usefulness of computer applications is limited by computer speed, memory, and software and the clarity and field of view of the projected display. Proposed advances in personal computers which will address these limitations are discussed. Long range applications for computers in education are considered.

Watson, Val↗
NASA NTRS1987

Overview of CFD validation experiments

The topics are presented in viewgraph form and include the following: fundamental physics validation experiments; applied physics validation experiments; physical flow phenomena; boundary layer tunnel; boundary layer research; centrifugal compressors; centrifugal compressor flow phenomena; turbomachinery computational fluid dynamics (CFD) validation; inlet, duct, and nozzle CFD validation; and chemical reacting flows CFD validation.

Povinelli, Louis A.↗