Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FORMING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Precipitate Phase Stability and Mechanical Properties of Alloy 263 and Variants in Wrought or Cast Form

Alloy 263 is a candidate Ni-based superalloy for use in advanced ultra-supercritical (AUSC) power plants that are targeted to operate above 700 °C. Exposure times in this type of environment are considerable with target creep properties specified at 100,000 h making phase stability an important parameter in the alloy selection process. In this investigation, the microstructure of alloy 263 and two modified compositions in both cast and cast/wrought forms were investigated after exposure at 800 °C for various times ranging from 1,000 h to 10,000 h. Tension and creep properties were assessed for all alloys in both forms. Modification to the Ti and Al concentrations successfully slowed down the γ' to η transformation while doubling the γ' fraction. Thin elongated η needles or platelets formed in the wrought products while thicker, plate-like, η precipitates were found in the castings. The effect of the various microstructures on the creep properties were determined using isothermally aged specimens aged at 800 °C for 3,000 h and 10,000 h prior to creep screening. Strong precipitation of the η phase was found to considerably decrease creep life and increase minimum creep rate. By modifying the Ti and Al content, the creep life and ductility of the new formulation tested on specimens isothermally aged for 3,000 and 10,000 h were near that of the nominal alloy in its standard aged condition.

Detrois, Martin↗
DOE OSTI2020

Weak neutral current axial form factor using $ \left(\overline{\nu}\right)\nu $-nucleon scattering and lattice QCD inputs

We present a determination of the neutral current weak axial charge $G$ $^{Z}_{A}$(0) = –0.654(3) stat (5) sys using the strange quark axial charge $G$ $^{s}_{A}$(0) calculated with lattice QCD. We then perform a phenomenological analysis, where we combine the strange quark electromagnetic form factor from lattice QCD with (anti)neutrino-nucleon scattering differential cross section from MiniBooNE experiments in a momentum transfer region 0.24 ≲ Q 2 ≲ 0.71 GeV 2 to determine the neutral current weak axial form factor $G$ $^{Z}_{A}$(Q 2 ) in the range of 0 ≲ Q 2 ≤ 1 GeV 2 . This yields a phenomenological value of $G$ $^{Z}_{A}$(0) = –0.687(89)stat(40)sys. The value of $G$ $^{Z}_{A}$(0) constrained by the lattice QCD calculation of $G$ $^{s}_{A}$(0), when compared to its phenomenological determination, provides a significant improvement in precision and accuracy and can be used to provide a constraint on the fit to $G$ $^{Z}_{A}$(Q 2 ) for Q 2 > 0. This constrained fit leads to an unambiguous determination of (anti)neutrino-nucleon neutral current elastic scattering differential cross section near Q 2 = 0 and can play an important role in numerically isolating nuclear effects in this region. We show a consistent description of $G$ $^{Z}_{A}$(Q 2 ) obtained from the (anti)neutrino-nucleon scattering cross section data requires a nonzero contribution of the strange quark electromagnetic form factor. We demonstrate the robustness of our analysis by providing a post-diction of the BNL E734 experimental data.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

A two-loop four-point form factor at function level

Recently, the maximally-helicity-violating four-point form factor for the chiral stress-energy tensor in planar $\mathcal{N}$ = 4 super Yang-Mills was computed to three loops at the level of the symbol associated with multiple polylogarithms. It exhibits antipodal self-duality, or invariance under the combined action of a kinematic map and reversing the ordering of letters in the symbol. Here we lift the two-loop form factor from symbol level to function level. We provide an iterated representation of the function’s derivatives (coproducts). In order to do so, we find a three-parameter limit of the five-parameter phase space where the symbol’s letters are all rational. We also use function-level information about dihedral symmetries and the soft, collinear, and factorization limits, as well as limits governed by the form-factor operator product expansion (FFOPE). We provide plots of the remainder function on several kinematic slices, and show that the result is compatible with the FFOPE data. We further verify that antipodal self-duality is valid at two loops beyond the level of the symbol.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Scattering amplitudes and simple canonical forms for simple polytopes

We provide an efficient recursive formula to compute the canonical forms of arbitrary d-dimensional simple polytopes, which are convex polytopes such that every vertex lies precisely on d facets. For illustration purposes, we explicitly derive recursive formulae for the canonical forms of Stokes polytopes, which play a similar role for a theory with quartic interaction as the Associahedron does in planar bi-adjoint φ 3 theory. As a by-product, our formula also suggests a new way to obtain the full planar amplitude in φ 4 theory by taking suitable limits of the canonical forms of constituent Stokes polytopes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

A three-point form factor through five loops

We bootstrap the three-point form factor of the chiral part of the stress­tensor supermultiplet in planar $\mathcal{N}$ = 4 super-Yang-Mills theory, obtaining new results at three, four, and five loops. Our construction employs known conditions on the first, second, and final entries of the symbol, combined with new multiple-final-entry conditions, “extended-Steinmann-like” conditions, and near-collinear data from the recently-developed form factor operator product expansion. Our results are expected to give the maximally transcendental parts of the gg → Hg and H → ggg amplitudes in the heavy-top limit of QCD. At two loops, the extended-Steinmann-like space of functions we describe contains all transcendental functions required for four-point amplitudes with one massive and three massless external legs, and all massless internal lines, including processes such as gg → Hg and γ * → $q\overline{q}g$. We expect the extended-Steinmann-like space to contain these amplitudes at higher loops as well, although not to arbitrarily high loop order. We present evidence that the planar $\mathcal{N}$ = 4 three-point form factor can be placed in an even smaller space of functions, with no independent ζ values at weights two and three.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Asymptotic behavior of meson transition form factors

One of the open issues in evaluations of the contribution from hadronic light-by-light scattering to the anomalous magnetic moment of the muon (g - 2)µ concerns the role of heavier scalar, axial-vector, and tensormeson intermediate states. The coupling of axial vectors to virtual photons is suppressed for small virtualities by the Landau–Yang theorem, but otherwise there are few rigorous constraints on the corresponding form factors. In this paper, we first derive the Lorentz decomposition of the two-photon matrix elements into scalar functions following the general recipe by Bardeen, Tung, and Tarrach. Based on this decomposition, we then calculate the asymptotic behavior of the meson transition form factors from a light-cone expansion in analogy to the asymptotic limits for the pseudoscalar transition form factor derived by Brodsky and Lepage. Finally, we compare our results to existing data as well as previous models employed in the literature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Interacting chiral form field theories and $$ T\overline{T} $$-like flows in six and higher dimensions

Abstract In this paper we initiate the study of six-dimensional non-linear chiral two-form gauge theories as deformations of free chiral two-form gauge theories driven by stress-tensor$$ T\overline{T} $$ T T ¯ -like flows. To lay the background for this study, we elaborate on the relationship between different Lagrangian formulations of duality-invariantp-form theories and corresponding$$ T\overline{T} $$ T T ¯ -like flows in various dimensions. To this end we propose a new formulation which (i) is a generalization of the four-dimensional construction by Ivanov, Nurmagambetov and Zupnik (INZ) and (ii) turns into the PST formulation upon integrating out an auxiliary self-dual field. We elucidate space-time covariant properties of the PST formulation by clarifying and making use of its relation to the INZ-type formulation and to a so-called “clone” construction.

Physics↗
DOE OSTI2025

Two-loop MHV form factors from the periodic Wilson loop

We discuss how to compute maximal-helicity-violating (MHV) form factors for the chiral part of the stress-tensor supermultiplet from periodic light-like polygon Wilson loops in planar $\mathcal{N}$ = 4 super Yang-Mills theory beyond the one-loop level. We show that the periodicity imposes path ordering on points on different edges, which explains the appearance of square roots coming from non-planar Feynman diagrams. Taking such diagrams into account, we provide the integrand of the two-loop n-particle MHV form factor, compute all diagrams, prove the cancellation of divergences and finally compute the two-loop 5-particle and 6-particle form factors as examples.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Study of gapped phases of 4d gauge theories using temporal gauging of the ℤN 1-form symmetry

To study gapped phases of 4d gauge theories, we introduce the temporal gauging of Z N 1-form symmetry in 4d quantum field theories (QFTs), thereby defining effective 3d QFTs with $\tilde{Z}_N$ × Z N 1-form symmetry. In this way, spatial fundamental Wilson and ’t Hooft loops are simultaneously genuine line operators. Assuming a mass gap and Lorentz invariant vacuum of the 4d QFT, the $\tilde{Z}_N$ × Z N symmetry must be spontaneously broken to an order-N subgroup H, and we can classify the 4d gapped phases by specifying H. This establishes the 1-to-1 correspondence between the two classification schemes for gapped phases of 4d gauge theories: one is the conventional Wilson-’t Hooft classification, and the other is the modern classification using the spontaneous breaking of 4d 1-form symmetry enriched with symmetry-protected topological states.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Flavoured axions in the tail of B q → μ+μ- and B → γ* form factors

We discuss how LHC di-muon data collected to study B q → μμ can be used to constrain light particles with flavour-violating couplings to b -quarks. Focussing on the case of a flavoured QCD axion, a , we compute the decay rates for B q → μμa and the SM background process B q → μμγ near the kinematic endpoint. These rates depend on non-perturbative B q → γ (*) form factors with on- or off-shell photons. The off-shell form factors — relevant for generic searches for beyond-the-SM particles — are discussed in full generality and computed with QCD sum rules for the first time. This includes an extension to the low-lying resonance region using a multiple subtracted dispersion relation. With these results, we analyse available LHCb data to obtain the sensitivity on B q → μμa at present and future runs. We find that the full LHCb dataset alone will allow to probe axion-coupling scales of the order of 10 6 GeV for both b → d and b → s transitions. As a spin-off application of the off-shell form factors we further analyse the case of light, Beyond the Standard Model, vectors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Dirac pairings, one-form symmetries and Seiberg-Witten geometries

The Coulomb phase of a quantum field theory, when present, illuminates the analysis of its line operators and one-form symmetries. For 4d $\mathcal{N}$ = 2 field theories the low energy physics of this phase is encoded in the special Kähler geometry of the moduli space of Coulomb vacua. We clarify how the information on the allowed line operator charges and one-form symmetries is encoded in the special Kähler structure. We point out the important difference between the lattice of charged states and the homology lattice of the abelian variety fibered over the moduli space, which, when principally polarized, is naturally identified with a choice of the lattice of mutually local line operators. This observation illuminates how the distinct S-duality orbits of global forms of $\mathcal{N}$ = 4 theories are encoded geometrically.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Stability of linear systems in second-order form based on structure preserving similarity transformations

This paper deals with two stability aspects of linear systems of the form I ¨ x +B˙ x +Cx = 0 given by the triple (I;B;C). A general transformation scheme is given for a structure and Jordan form preserving transformation of the triple. We investigate how a system can be transformed by suitable choices of the transformation parameters into a new system (I;B1;C1) with a symmetrizable matrix C1. This procedure facilitates stability investigations. We also consider systems with a Hamiltonian spectrum which discloses marginal stability after a Jordan form preserving transformation.

Stoustrup, Jakob↗
DOE OSTI2020

Coordinative Entities: Forms of Organizing in Data Intensive Science

Scientific collaboration is a long-standing subject of CSCW scholarship that typically focuses on the development and use of computing systems to facilitate research. The research presented in this article investigates the sociality of science by identifying and describing particular, common forms of organizing that researchers in four different scientific realms employ to conduct work in both local contexts and as part of distributed, global projects. This paper introduces five prototypical forms of organizing we categorize as coordinative entities: the Principal Group, Intermittent Exchange, Sustained Aggregation, Federation, and Facility Organization. Coordinative entities as a categorization help specify, articulate, compare, and trace overlapping and evolving arrangements scientists use to facilitate data intensive research. We use this typology to unpack complexities of data intensive scientific collaboration in four cases, showing how scientists invoke different coordinative entities across three types of research activities: data collection, processing, and analysis. Finally, our contribution scrutinizes the sociality of scientific work to illustrate how these actors engage in relational work within and among diverse, dispersed forms of organizing across project, funding, and disciplinary boundaries.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2019

Effects on Glass Forming Ability, Microstructure, Crystallization Behaviors, and Magnetic Properties of Si Substituting for P in Fe-Rich Fe{sub 86}B{sub 13−x}Si{sub x}P{sub 1}Cu{sub 0.6}Hf{sub 0.4} Alloys

In the paper, we have studied the effects on glass forming ability (GFA), microstructure, crystallization behaviors, and saturation magnetization (M{sub s}) of Si substitution for P in Fe-rich Fe{sub 86}B{sub 12}Si{sub x}P{sub 1−x}Cu{sub 0.4}Hf{sub 0.6} alloys. The amorphous structure is identified by X-ray diffraction first, and the patterns with Si addition less than x = 0.75 only show one halo scattering peak at 2θ = 45°; further, the ribbons with entirely amorphous structure have been fabricated successfully and the alloys have a good GFA. Then, by differential scanning calorimetry testing, the curves show two separated exothermic peaks and the ribbons will go through a two-step crystallization before reaching stable state; further, the first peak is ensured by the crystallization of a-Fe phase while the second peak is ensured by the precipitation of FeB or Fe(BP) compounds. As Si was added, the apparent activation energy of the first crystallization (E{sub a1}) and the second crystallization (E{sub a2}) shows an increased tendency first and then decreases slightly. By comparison, as x = 0, x = 0.25, and x = 0.5, the ribbons easily form Hf{sub 3}P{sub 2} compounds during the first crystallization process simultaneously, where the ribbons of x = 0.75 and x = 1.0 are easier to finish the first crystallization for forming the uniform a-Fe phase entirely. By vibrating sample magnetometer testing, with the addition of Si, M{sub s} value shows an increased trend and reaches to the maximum about 177.5 emu/g (x = 1.0), and which shows an increased trend in the subsequent annealing process and reaches to the maximum 206.3 emu/g (x = 0), 212.3 emu/g (x = 0.25), 214.2 emu/g (x = 0.5), 214.9 emu/g (x = 0.75), and 208.3 emu/g (x = 1.0) as the annealing temperature higher than T{sub p1} but less than T{sub x2}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Root architectural plasticity optimizes nutrient acquisition in switchgrass under variable phosphorus forms

Aims Understanding the influence of different forms of phosphorus (P) over the different root traits and how those traits are related to increasing the efficiency of nutrient acquisition strategies. Methods Investigation of switchgrass (Panicum virgatum L.) root morphology responses to inorganic P (Pi) soluble (Potassium-P), insoluble (Aluminum-P), and organic P (Po) (Inositol Hexa-Phosphate, IHex-P) in rhizoboxes. Roots were traced over the root box and scanned using WinRhizoTM. The CRootbox model was employed to simulate root growth. Results Significant plasticity observed under IHex-P treatment, with a 46% increase in root branching, leading to a 74% rise in total root length and a 65% increase in root surface area compared to inorganic P forms. IHex-P resulted in a 73% higher root biomass than Aluminum-P and a 26% increase compared to Potassium-P. Most of the differences were attributed to the elongation of root branches. Conclusions Here, the study emphasizes the dynamic nature of switchgrass root architecture and morphology in response to varying P forms in the soil. The absence of Pi in the soil triggered increased plasticity in root traits, facilitating root access to Po and uptake of P. These findings offer valuable insights into the adaptive mechanisms of perennial plants, with significant implications for optimizing nutrient acquisition strategies in both agricultural and natural ecosystems.

Organic phosphorus↗
DOE OSTI2022

Inhibition of Micro-pitting by Tribofilm-Forming ZrO 2 Nanocrystal Lubricant Additives: A Micro-pitting Rig and Transmission Electron Microscope Study

The drive to reduce fuel consumption in transportation has encouraged the emergence of low viscosity lubricants to reduce viscous losses in the engine, drivetrain, and other components. However, viscosity reduction increases the risk of surface damage, thus motivating the development of new anti-wear (AW) additives. Capped ZrO 2 nanocrystals (NCs) in base oils have been shown to form AW tribofilms within microscale sliding contacts. However, the potential of ZrO 2 NCs to protect surfaces subjected to rolling-sliding contact from macroscale damage, such as micro-pitting, remains unexplored. Here, we explore the ability of ZrO 2 NCs to form protective tribofilms under harsh conditions using a micro-pitting rig (MPR), consisting of a three ring-on-roller configuration. The experiments were conducted in polyalphaolephin (PAO) base oil, with and without 5 nm diameter ZrO 2 NCs, at two levels of slide-to-roll ratio (SRR) (30% and 0%) and at variable test durations up to long durations (119 h). MPR results showed the use of ZrO 2 NCs gives rise to the formation of a tribofilm covering the roller surfaces and decreases the initiation and propagation of micro-pits compared to tests in pure PAO base stock. Transmission electron microscopy (TEM) performed on focused ion beam (FIB) milled cross-sectional samples of the roller surfaces revealed the growth of dense and 50–100 nm thick ZrO 2 -based tribofilms independent of (SRR), indicating the potential for robust micro-pitting fatigue protection. Nevertheless, small cracks localized within the near surface region of the roller tested at the most severe conditions (30% SRR and 119 h) were observed. The initiation of these cracks was directly related to the presence of manganese sulphide (MnS) inclusions in the steel, revealed using TEM combined with energy dispersive spectroscopy (EDS). Furthermore, the results highlight the benefits of the protective tribofilms formed by ZrO 2 NCs and suggest approaches for further optimizing their use.

36 MATERIALS SCIENCE↗
DOE OSTI2019

The Effect of Jet Flow Impingement on the Corrosion Products Formed on a Pipeline Steel in Naturally Aerated Sour Brine

Corrosion was generated by the action of a jet impingement flow of sour brine on pipeline steel samples of X70. Flow-assisted corrosion affected nature, number and peak intensity of the chemical species formed as corrosion products. Iron sulfides predominated in static and low flow rate conditions (1.1 m/s), whereas at 2.4 m/s iron oxides were mainly formed, which led to higher corrosion rates and suggested that oxides are less protective than sulfides. On inhibition, imidazoline seems to mitigate oxide formation and support sulfide formation balancing both species on steel surface. Ferrite phase in laminar pearlite was preferentially dissolved with/without inhibitor, and mackinawite (FeS{sub 2}) was formed at every flow rate, angle with and without inhibitor. Theoretical stresses determined by computational flow dynamics for corrosion product removal showed a fair approximation to those proposed in the literature.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Multistage Axial Hydro-Forging Sequence: A New Forming Approach for Manufacturing of Double-Stepped Tubes

To manufacture the large-expansion-ratio double-stepped tube without thinning, a new approach known as multistage axial hydro-forging sequence has been proposed in this study. The whole forming process is divided into five stages. Compared with traditional tube hydroforming, the thickness can be increased by axial compression deformation to reduce the thinning ratio and enhance the forming capacity of the tube in hydro-forging stage and double-stepped hydro-forging stage, respectively. The proposed multistage axial hydro-forging sequence process was implemented by experiments along with the finite element simulation to validate its feasibility. The suitable loading path to prevent defects such as wrinkle and thinning was discussed. The results showed that double-stepped tube with large expansion ratio can be produced successfully with movable dies’ design. There is no thinning in the final tube, particularly in all stepped area, and a better thickness distribution could be achieved. As a result, the proposed multistage axial hydro-forging sequence can be a feasible forming approach for the fabrication of large-expansion-ratio double-stepped tubes with high reliability.

36 MATERIALS SCIENCE↗