Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experiment 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS2013

Modeling of 2008 Kasatochi Volcanic Sulfate Direct Radiative Forcing: Assimilation of OMI SO2 Plume Height Data and Comparison with MODIS and CALIOP Observations

Volcanic SO2 column amount and injection height retrieved from the Ozone Monitoring Instrument (OMI) with the Extended Iterative Spectral Fitting (EISF) technique are used to initialize a global chemistry transport model (GEOS-Chem) to simulate the atmospheric transport and lifecycle of volcanic SO2 and sulfate aerosol from the 2008 Kasatochi eruption, and to subsequently estimate the direct shortwave, top-of-the-atmosphere radiative forcing of the volcanic sulfate aerosol. Analysis shows that the integrated use of OMI SO2 plume height in GEOS-Chem yields: (a) good agreement of the temporal evolution of 3-D volcanic sulfate distributions between model simulations and satellite observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) and Cloud-Aerosol Lidar with Orthogonal Polarisation (CALIOP), and (b) an e-folding time for volcanic SO2 that is consistent with OMI measurements, reflecting SO2 oxidation in the upper troposphere and stratosphere is reliably represented in the model. However, a consistent (approx. 25 %) low bias is found in the GEOS-Chem simulated SO2 burden, and is likely due to a high (approx.20 %) bias of cloud liquid water amount (as compared to the MODIS cloud product) and the resultant stronger SO2 oxidation in the GEOS meteorological data during the first week after eruption when part of SO2 underwent aqueous-phase oxidation in clouds. Radiative transfer calculations show that the forcing by Kasatochi volcanic sulfate aerosol becomes negligible 6 months after the eruption, but its global average over the first month is -1.3W/sq m, with the majority of the forcing-influenced region located north of 20degN, and with daily peak values up to -2W/sq m on days 16-17. Sensitivity experiments show that every 2 km decrease of SO2 injection height in the GEOS-Chem simulations will result in a approx.25% decrease in volcanic sulfate forcing; similar sensitivity but opposite sign also holds for a 0.03 m increase of geometric radius of the volcanic aerosol particles. Both sensitivities highlight the need to characterize the SO2 plume height and aerosol particle size from space. While more research efforts are warranted, this study is among the first to assimilate both satellite-based SO2 plume height and amount into a chemical transport model for an improved simulation of volcanic SO2 and sulfate transport.

Wang, J.↗
NASA NTRS2017

Advanced Colloids Experiment (Microscopy) - ACE-M2R

Increment 53 - 54 Science Symposium presentation of Advanced Colloids Experiment (ACE-H-2) to RPO. The purpose of this event is for Principal Investigators to present their science objectives, testing approach, and measurement methods to agency scientists, managers, and other investigators.

microscopy↗
NASA NTRS2018

MCT Avalanche Photodiode Detector for Two-Micron Active Remote Sensing Applications

Mercury Cadmium Telluride electron initiated avalanche photodiodes demonstrated a breakthrough in lidar active remote sensing technology. A lidar detection system, based on an array of these devices, was integrated and characterized for 2-μm applications. Characterization experiments were focused on evaluating the dark current, gain and responsivity variations with bias voltage. Quantum efficiency and input dynamic range including noise-equivalent-power and maximum detectable power, were calculated from these results. Operating the detection system using four pixels at 77.6 K, 12 V bias resulted in a current responsivity of 615.8 A/W and a voltage responsivity of 1.45 GV/W. Minimum detectable power of 14 pW was obtained, which is equivalent to 5.7 fW/Hz(exp 1/2) noise-equivalent-power, indicating an average noise-equivalent-power of 1.4 fW/Hz(exp 1/2) per pixel. Work is in progress to integrate and validate this detection system using a newly developed triple-pulse integrated path differential absorption lidar for simultaneous and independent atmospheric measurements of water vapor and carbon dioxide.

Refaat, Tamer F.↗
NASA NTRS2018

Application of STARFLEET Velocimetry in the NASA Langley 0.3-Meter Transonic Cryogenic Tunnel

Selective two-photon absorptive resonance femtosecond laser electronic excitation tagging (STARFLEET) velocimetry is demonstrated for the first time in a NASA Langley wind tunnel with high repetition-rate and single-shot imaging. Experiments performed in the 0.3-meter Transonic Cryogenic Tunnel (TCT) allowed for testing at 300 K over a range of pressures (124 to 517 kPa) and Mach numbers (0.2-0.8) for freestream conditions and flow behind a cylindrical model. Measurement precision and accuracy are determined for the current set of experiments, as are signal intensity and lifetime. Precisions of 3-5 m/s (based on one standard deviation) were typical in the experiment; precisions better than 2% of the mean velocity were obtained for some of the highest velocity conditions. Agreement within a mean error of 3 m/s between STARFLEET freestream velocity measurements and facility DAS readings is demonstrated. STARFLEET is also shown to return spatially-resolved velocity profiles, though some binning of the signal is required.

STARFLEET↗
NASA NTRSDate not supplied

A Simulated Drilling Mission to Search for Bio-molecular Signatures of Life on Mars Performed in the Atacama Desert (Chile): Demonstrating Drilling, Sample Handling, and Life-Detection Instruments Remotely Operated with Mission-like Protocols

The search for evidence of life on Mars requires accessing materials that are protected from the oxidizing and irradiated conditions at the surface. Mars rovers Curiosity and Perseverance have performed shallow (few cm) drilling to access relevant samples. The upcoming ExoMars mission will acquire samples from up to 2 meters depth. Field experiments in Mars analog sites help prepare for this and other future deep drilling missions. In Sept. 2019 the ARADS (Atacama Rover Astrobiology Drilling Studies project (Glass et al. 2022) conducted a rover-based drilling mission to search for bio-molecular evidence of life in a Mars analog site in Atacama Chile.

Carol R. Stoker↗
NASA NTRSDate not supplied

Logical Shadow Tomography: Efficient Estimation of Error-mitigated Observables

In near-term quantum applications, reducing errors and improving device reliability is an essential task. Towards these ends, various techniques have been introduced in recent literature, collectively referred to as quantum error mitigation techniques, for reducing errors in pre-fault-tolerant devices. Here, we introduce logical shadow tomography as a versatile error mitigation method. Our technique uses a stabilizer code to encode information in a logical state. Instead of doing active error correction, quantum states will be measured at the end of computation via shadow tomography and non-logical errors are projected out in the classical post-processing. Relative to quantum subspace expansion which requires O(2(M-1)L) experiments to estimate an logical Pauli observable encoded by an [[M, L, d]] code, our technique only requires 2L experiments, an important practical reduction in resources.

Hong-Ye Hu↗
NASA NTRSDate not supplied

A Simulated Drilling Mission to Search for Biomolecular Signatures of Life on Mars Performed in the Atacama Desert (Chile): Demonstrating Drilling, Sample Handling, and Life-Detection Instruments Remotely Operated with Mission-like Protocols

The search for evidence of life on Mars requires accessing materials that are protected from the oxidizing and irradiated conditions at the surface. Mars rovers Curiosity and Perseverance have performed shallow (few cm) drilling to access relevant samples. The upcoming ExoMars mission will acquire samples from up to 2 meters depth. Field experiments in Mars analog sites help prepare for this and other future deep drilling missions. In Sept. 2019 the ARADS (Atacama Rover Astrobiology Drilling Studies project (Glass et al. 2022) conducted a roverbased drilling mission to search for biomolecular evidence of life in a Mars analog site in Atacama, Chile.

Carol R. Stoker↗
NASA NTRSDate not supplied

Advances in Integrally Formed Metallic Structures

NASA Langley Research Center (LaRC) is applying flow forming technology to aerospace aluminum alloys for the manufacture of integrally stiffened cylinders that meet aircraft fuselage or launch vehicle specifications. High-strength 2xxx series alloys, in various temper/product form conditions, are being compared with medium-strength, very formable AA 6061 as the benchmark. Screening of candidate materials traditionally relies on empirical forming trials, but more recently on metrics derived from constant nominal strain rate tensile testing. In this work, the established hierarchy of formability metrics is adopted as the baseline; tensile area reduction, work hardening exponent, and modulus of resilience. The suite of metrics can be expanded based on phenomenological and mechanistic considerations of plastic flow instabilities to incorporate anisotropy ratio, rate of work hardening, and dynamic strain aging effects. Separate research thrusts at LaRC are aimed at formulating a protocol for scalable production of fully formed, defect-free components: 1) quantifying the extended set of formability metrics from constant and jump strain rate tensile tests with digital image correlation (DIC); 2) using statistically designed experiments on a vertical spin/flow forming facility (WF VUD-600®) to isolate the effect of convenient process variables, such as axial feed rate and thickness reduction; and 3) predicting the effect of feed ratio (roller translation relative to mandrel rotation speeds) on material response via process modeling using the DEFORM® simulation software. Current results will be discussed in terms of correlating intrinsic material properties with the bulk workability characteristics to successfully fabricate cylinders with complex cross-sections.

Aluminum↗
NASA NTRS1971

VHF ranging and position fixing experiment using ATS satellites: Executive summary of final report on phases 1 and 2, 25 November - 1 May 1971

The VHF transponders of the ATS-1 and ATS-3 geostationary satellites were used in ranging and position fixing experiments. An interrogation signal was transmitted from a ground terminal to ATS-3, which relayed it to the vehicle transponders. The vehicle that was addressed repeated the signal and its response was relayed back through both satellites to the ground terminal, where propagation times were measured; lines-of-position and fixes were computed. The 0.43 second tone-code ranging signal contained a single audio tone frequency. Ambiguity was resolved and user craft identified by a simple digital code. Seven vehicles were used in the test: three aircraft, two ships, an oceanographic buoy, and a truck. Ionospheric and multipath effects were studied. It is concluded that a VHF system could have an accuracy of + or - one nautical mile for ships and aircraft if calibration transponders are used to monitor the ionosphere.

Source record↗
NASA NTRS1990

BASG thermomechanical pump helium 2 transfer tests

The purpose of the effort described was to perform experiments and calculations related to using a thermomechanical pump in the space-based resupply of the Space Infrared Telescope Facility (SIRTF) with Helium 2. Thermomechanical (fountain effect) pumps have long been suggested as a means for pumping large quantities of Helium 2. The unique properties of Helium 2 have made it useful for cooling space instruments. Several space science missions, including SIRTF, are now being planned which would benefit greatly from on-orbit resupply of Helium 2. A series of experiments were performed to demonstrate that large volumes of Helium 2 can be transferred with a thermomechanical pump at high flow rates and at high efficiency from one dewar to another through valves and lines that are similar to the plumbing arrangement that would be necessary to accomplish such a transfer on-orbit. In addition, temperature, pressure, and flow rate data taken during the tests were used to verify and refine a computer model which was developed.

Mills, G. L.↗
NASA NTRS1975

The system anorthite-forsterite-fayalite-silica to 2 kbar with lunar petrologic applications

Near-liquidus phase relations in the magnesium-rich portion of the system anorthite-forsterite-fayalite-silica have been determined from synthesis experiments at 1 atm and 2 kbar at oxygen fugacities near the iron-wuestite buffer. The major-element chemistries of KREEP basalts are similar to peritectic liquids, L/ol,px,an/, produced experimentally. The reaction L/ol,px,an/ is well-located at low pressures. It intersects the join anorthite-enstatite-ferrosilite at Fe/(Fe+Mg) equals 0.45 (atomic ratio), and is peritectic only for Fe/(Fe+Mg) not greater than 0.45. Although positions of the equilibria, L/an,ol/ and L/ol,px/, differ significantly at 1 atm from their positions at 2 kbar, the position of the piercing point, L/ol,px,an/, on the anorthite-enstatite-ferrosilite join is not sensitive to pressure. The composition of liquids produced by partial melting of troctolites and pyroxenites in the lunar crustal environment will be affected by pressure, whereas liquids derived from gabbroic assemblages will not.

Merrill, R. B.↗
NASA NTRS1979

ISEE 1 and 2 particle observations of outer plasma sheet boundary

Observations of particle structures by a medium-energy particle experiment on the ISEE 1 and 2 spacecraft at a distance of about 20 earth radii in the geomagnetic tail are presented. Comparison of these data with plasma data indicates the existence of a layer of energetic electrons and ions just outside the plasma sheet. The region outside the plasma sheet in the high-latitude lobe is permeated with low-intensity low-energy (about 1.5 KeV) ions. These particle structures have velocities of a few kilometers per second to at least about 60 km/s. Large-scale motions are observed with onset and recovery of substorms. The dimensions of the particle structures are estimated to range from about 200 to 10,000 km at 20 earth radii. The particle structures are dependent upon the energy as well as the species of the particles.

Parks, G. K.↗
NASA NTRS2000

Compendium of NASA Data Base for the Global Tropospheric Experiment's Pacific Exploratory Mission - Tropics B (PEM-Tropics B): P-3B - Volume 2

This report provides a compendium of NASA aircraft data that are available from NASA's Global Tropospheric Experiment's (GTE) Pacific Exploratory Mission-Tropics B (PEM-Tropics B) conducted in March and April 1999. PEM-Tropics B was conducted during the southern-tropical wet season when the influence from biomass burning observed in PEM-Tropics A was minimal. Major deployment sites were Hawaii, Kiritimati (Christmas Island), Tahiti, Fiji, and Easter Island. The broad goals of PEM-Tropics B were to improved understanding of the oxidizing power of the atmosphere and the processes controlling sulfur aerosol formation and to establish baseline values for chemical species that are directly coupled to the oxidizing power and aerosol loading of the troposphere. The purpose of this document is to provide a representation of aircraft data that will be available in archived format via NASA Langley's Distributed Active Archive Center (DAAC) or are available through the GTE Project Office archive. The data format is not intended to support original research/analysis, but to assist the reader in identifying data that are of interest.

Scott, A. Donald, Jr.↗
NASA NTRS1972

Relativistic stellar stability: An empirical approach

The PPN formalism which encompasses the post-Newtonian limit of nearly every metric theory of gravity is used to analyze stellar stability. This analysis enables one to infer, for any given gravitation theory, the extent to which post-Newtonian effects induce instabilities in white dwarfs, in neutron stars, and in supermassive stars. It also reveals the extent to which our current empirical knowledge of post-Newtonian gravity (based on solar-system experiments) actually guarantees that relativistic instabilities exist. In particular, it shows that: (1) for conservative theories of gravity, current solar-system experiments guarantee that the critical adiabatic index, for the stability of stars against radial pulsations exceeds the Newtonian value of 4/3 and (2) for nonconservative theories, current experiments do not permit any firm conclusion about the sign of the critical adiabatic index, and (3) in the PPN approximation to every metric theory, the standard Schwarzschild criterion for convection is valid.

Ni, W.↗
NASA NTRS1995

Portable Computer Technology (PCT) Research and Development Program Phase 2

The subject of this project report, focused on: (1) Design and development of two Advanced Portable Workstation 2 (APW 2) units. These units incorporate advanced technology features such as a low power Pentium processor, a high resolution color display, National Television Standards Committee (NTSC) video handling capabilities, a Personal Computer Memory Card International Association (PCMCIA) interface, and Small Computer System Interface (SCSI) and ethernet interfaces. (2) Use these units to integrate and demonstrate advanced wireless network and portable video capabilities. (3) Qualification of the APW 2 systems for use in specific experiments aboard the Mir Space Station. A major objective of the PCT Phase 2 program was to help guide future choices in computing platforms and techniques for meeting National Aeronautics and Space Administration (NASA) mission objectives. The focus being on the development of optimal configurations of computing hardware, software applications, and network technologies for use on NASA missions.

Castillo, Michael↗
NASA NTRS2002

STS-107 Crew Interviews: Michael Anderson, Mission Specialist

STS-107 Mission Specialist 3 and Payload Commander Michael Anderson is seen during this preflight interview, where he gives a quick overview of the mission before answering questions about his inspiration to become an astronaut and his career path. He outlines his role in the mission in general, and specifically in conducting onboard science experiments. He discusses the following instruments and sets of experiments in detail: CM2 (Combustion Module 2), FREESTAR (Fast Reaction Enabling Science Technology and Research, MEIDEX (Mediterranean Israeli Dust Experiment) and MGM (Mechanics of Granular Materials). Anderson also mentions on-board activities and responsibilities during launch and reentry, mission training, and microgravity research. In addition, he touches on the dual work-shift nature of the mission, the use of crew members as research subjects including pre and postflight monitoring activities, the emphasis on crew safety during training and the value of international cooperation.

Source record↗
NASA NTRS2002

STS-107 Crew Interviews: Ilan Ramon, Mission Specialist

STS-107 Mission Specialist Ilan Ramon is seen during this preflight interview, where he gives a quick overview of the mission before answering questions about his inspiration to become an astronaut and his career path. He outlines his role in the mission in general, and specifically in conducting on-board science experiments. He discusses the following instruments and sets of experiments in detail: CM2 (Combustion Module 2), FREESTAR (Fast Reaction Enabling Science Technology and Research), MEIDEX (Mediterranean Israeli Dust Experiment) and MGM (Mechanics of Granular Materials). Ramon also mentions on-board activities during launch and reentry, mission training and microgravity research. In addition, he touches on the dual work-shift nature of the mission, the use of crew members as research subjects including pre and postflight monitoring activities, the emphasis on crew safety during training and the value of international cooperation.

Source record↗
NASA NTRS2003

An Overview of the Process for Pre-Launch Checkout and Transition Activities in Support of the International Space Station (ISS) Payload Operations Integration Center

The objective of this paper is to provide future ISS scientists and/or engineers with an overview of the coordination process for the preparation and implementation of the pre-launch checkout and transition activities as observed from the Marshall Control Flight Center (MSFC) Payload Operations Integration Center perspective. This includes 4 major phases: (1) Verification and validation of the new command and telemetry databases that are needed for new payload experiments and new onboard formats; (2) Integration testing of the new ground control software and hardware; (3) Final internal and external pre-launch checkouts with cadre and experiment teams; (4) Performance of the actual synchronized transition between MSFC, Johnson Space Center (JSC), and ISS onboard configuration to new onboard software, ground software, and databases.

Digesu, Sam↗