Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effectiveness evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Long-term variability in immersion-mode marine ice-nucleating particles from climate model simulations and observations

Abstract. Ice-nucleating particles (INPs) in the Southern Ocean (SO) atmosphere have significant impacts on cloud radiative and microphysical properties. Yet, INP prediction skill in climate models remains poorly understood, in part because of the lack of long-term measurements. Here we show, for the first time, how model-simulated INP concentrations compare with year-round INP measurements during the Macquarie Island Cloud Radiation Experiment (MICRE) campaign from 2017–2018. We simulate immersion-mode INP concentrations using the Energy Exascale Earth System Model version 1 (E3SMv1) by combining simulated aerosols with recently developed deterministic INP parameterizations and the native classical nucleation theory (CNT) for mineral dust in E3SMv1. Because MICRE did not collect aerosol measurements of super-micron particles, which are more effective ice nucleators, we evaluate the model's aerosol fields at other high-latitude sites using long-term in situ observations of dust and sea spray aerosol. We find that the model underestimates dust and overestimates sea spray aerosol concentrations by 1 to 2 orders of magnitude for most of the high-latitude sites in the Southern Hemisphere. We next compare predicted INP concentrations with concentrations of INPs collected on filter samples (typically for 2 or 3 d) and processed offline using the Colorado State University ice spectrometer (IS) in immersion freezing mode. We find that when deterministic parameterizations for both dust and sea spray INPs are used, simulated INPs are within a factor of 10 of observed INPs more than 60 % of the time during summer. Our results also indicate that the E3SM's current treatment of mineral dust immersion freezing in the SO is impacted by compensating biases – an underprediction of dust amount was compensated by an overprediction of its effectiveness as INPs. We also perform idealized droplet freezing experiments to quantify the implications of the time-dependent behavior assumed by the E3SM's CNT-parameterization and compare with the ice spectrometer observations. We find that the E3SM CNT 10 s diagnostic used in this study is a reasonable approximation of the exact formulation of CNT, when applied to ice spectrometer measurements in low-INP conditions similar to Macquarie Island. However, the linearized 10 s diagnostic underestimates the exact formula by an order of magnitude or more in places with high-INP conditions like the Sahara. Overall, our findings suggest that it is important to correct the biases in E3SM's simulated dust life cycle and update E3SM's INP parameterizations. INP prediction errors of 2 to 3 orders of magnitude can have considerable impacts on the simulated cloud and radiative properties in global climate models. On comparing INP concentrations during MICRE against ship-based campaigns, Measurements of Aerosols, Radiation, and Clouds over the Southern Ocean (MARCUS) and Antarctic Circumnavigation Expedition (ACE), we find that INPs from the latter are significantly higher only in regions closer to Macquarie Island. This alludes to the fact that physical, chemical and biological processes affecting INP concentrations as stimulated by the island could be partly responsible for the high INP concentrations observed at Macquarie Island during the MICRE campaign. Therefore, improvements to both aerosol simulation and INP parameterizations are required to adequately simulate INPs and their cloud impacts in E3SM. It will be helpful to include a parallel measurement of the size-resolved aerosol composition and explore opportunities for long-term measurement platforms in future field campaigns studying INP sources in remote marine regions.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Impact of solar geoengineering on temperature-attributable mortality

Decisions about solar geoengineering (SG) entail risk–risk tradeoffs between the direct risks of SG and SG’s ability to reduce climate risks. Quantitative comparisons between these risks are needed to inform public policy. We evaluate idealized SG’s effectiveness in reducing deaths from warming using two climate models and an econometric analysis of temperature-attributable mortality. We find SG’s impact on temperature-attributable mortality is uneven with decreases for hotter, poorer regions and increases in cooler, richer regions. Relative to no SG, global mortality is reduced by over 400,000 deaths annually [90% CI: (−1.2 million,2.7 million)] for cooling of 1 °C from 2.5 °C above preindustrial in 2080. We find no evidence that mortality reduction achieved by SG is smaller than the reduction from equivalent cooling by emissions reductions. Combining our estimates with existing estimates of sulphate aerosol injection direct mortality risk from air quality and UV-attributable cancer enables the first quantitative risk-risk comparison of SG. We estimate with 61% probability that the mortality benefits of cooling outweigh these direct SG risks. We find the benefits outweigh these risks by 13 times for our central estimates, or 4 deaths per 100,000 per 1 °C per year [90% CI: (−11,23)]. This is not a comprehensive evaluation of the risk–risk tradeoffs around SG, yet by comparing some of the most consequential impacts on human welfare it is a useful first step. While these findings are robust to a variety of alternative assumptions, considerable uncertainties remain and require further investigation.

Harding, Anthony (ORCID:0000000262898253)↗
DOE OSTI2023

Diminishing marginal effect in estimating the dissolved organic carbon export from a watershed

Dissolved organic carbon (DOC) can be initially moved from soils to inland waters with surface runoff, and then mineralized, buried, or eventually delivered to the coastal ocean. This land-to-ocean phase of the DOC flux must be accounted for to comprehensively understand the global carbon cycle. To estimate the terrestrial-aquatic DOC leaching, calculating the product of the riverine DOC concentration and the corresponding river discharge measured at the watershed outlet is a common method. However, it is challenging to frequently and exactly record riverine DOC concentrations, thus the relationship between DOC concentrations and discharges (C-Q relationship) are established and used to interpolate the time-series of DOC concentrations. We found that the widely used time-dependent and time-independent C-Q regression models are weak in representing their altered relationship when the discharge is extremely high, which was named as diminishing marginal effect. In this study, we evaluated the performance of two C-Q regression models and discussed possible reasons for the diminishing marginal effect. We suggest that repeated and long-term measurements of the DOC concentration are required to adequately analyze their relationships, especially during the early spring and seasons with heavy precipitations.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

TEAMER - Field Demonstration of MarineSitu’s Marine Energy Monitoring Tools - CRADA 664 (Abstract)

In order to effectively monitor for marine life around marine energy devices and thus minimize the risk of collision, multiple sensors working in coordination and augmented with around-the-clock automated monitoring algorithms need to be installed in challenging high-energy tidal and wave environments. Such systems are often too expensive for widespread adoption, or lack sufficient sensors or smarts to enable around-the-clock, real-time monitoring without human involvement. MarineSitu has been working to tackle this problem by developing a low-cost, combined sonar and stereo camera sensor array with connected real-time AI-based algorithms for automatically detecting marine life in these marine energy suitable environments. In this TEAMER project with Pacific Northwest National Lab (PNNL), MarineSitu will be testing this novel sensor system for the first time in the high-energy tidal channel environment at PNNL’s Marine and Coastal Research Lab. Throughout this deployment, MarineSitu will be monitoring their system and running analytics on the sensor’s data in real-time. Meanwhile, PNNL Data Scientists and Ocean Engineers, will be evaluating the system’s effectiveness and ease of use both as a tool for plug-and-play environmental monitoring and novel environmental monitoring research. In doing so, the team will improve MarineSitu’s system and software, produce insightful data products, and develop novel visualizations and AI algorithms for combining and analyzing the data produced by systems like MarineSitu’s.

16 TIDAL AND WAVE POWER↗
DOE OSTI2025

TEAMER – Field Demonstration of MarineSitu’s Marine Energy Monitoring (Abstract)

In order to effectively monitor for marine life around marine energy devices and thus minimize the risk of collision, multiple sensors working in coordination and augmented with around-the-clock automated monitoring algorithms need to be installed in challenging high-energy tidal and wave environments. Such systems are often too expensive for widespread adoption, or lack sufficient sensors or smarts to enable around-the-clock, real-time monitoring without human involvement. MarineSitu has been working to tackle this problem by developing a low-cost, combined sonar and stereo camera sensor array with connected real-time AI-based algorithms for automatically detecting marine life in these marine energy suitable environments. In this TEAMER project with Pacific Northwest National Lab (PNNL), MarineSitu will be testing this novel sensor system for the first time in the high-energy tidal channel environment at PNNL’s Marine and Coastal Research Lab. Throughout this deployment, MarineSitu will be monitoring their system and running analytics on the sensor’s data in real-time. Meanwhile, PNNL Data Scientists and Ocean Engineers, will be evaluating the system’s effectiveness and ease of use both as a tool for plug-and-play environmental monitoring and novel environmental monitoring research. In doing so, the team will improve MarineSitu’s system and software, produce insightful data products, and develop novel visualizations and AI algorithms for combining and analyzing the data produced by systems like MarineSitu’s.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

EV SALaD 2023 Demonstration: Best Practices and Mitigations for Protecting EVSE Infrastructure

The Electric Vehicle Secure Architecture Laboratory Demonstration (EV SALaD) program is a demonstration of cybersecurity best practices for high-power electric vehicle (EV) charging infrastructure led by Idaho National Laboratory (INL), in collaboration with other DOE National Laboratories participating in the EVs at Scale Consortium.a Sandia National Laboratories (SNL) and Pacific Northwest National Laboratory (PNNL) participated in the first 2-year (FY22-23) demonstration cycle for EV SALaD. This report documents the FY23 demonstration, the second in a series of demonstrations and collaborations in deploying and operating cybersecure EV charging infrastructure. It includes a summary of improvements from the FY22 demonstration, technical analysis of the FY23 demonstration, how the research demonstrates cyber-physical and cybersecurity best practices for high-power EV charging infrastructure, and related impacts to national and energy security. For EV SALaD, the FY22 demonstration focused on the detection, ranking, and prioritization of anomalous events for high-power EV charging. The FY23 demonstration additionally included the demonstration of cybersecurity best practices, which included protection and mitigation solutions to prevent, respond, and recover from anomalous events. During the demonstrations, the multi-lab EV SALaD team conducted a Test Effect Payload (TEP)b evaluation on extreme fast charger (XFC) hardware equipped with Cerberus, a detection and response solution, to demonstrate anomaly detection and mitigation cybersecurity best practices against cyber-enabled events.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2023

Compatibility of ethylene vinyl acetate (EVA)/ethylene vinyl alcohol (EVOH)/EVA films with gamma, electron-beam, and X-ray irradiation

Many polymer-based medical devices are sterilized by gamma irradiation. To reduce the use of cobalt-60 gamma-ray sources, transition from gamma ray to alternative irradiation technologies was proposed, namely electron beam (e-beam) and X-ray. A major impediment for such a transition is the knowledge gap in material compatibility with the different radiation sources. In this study, multi-layer films consisting of ethylene vinyl acetate (EVA) and ethylene vinyl alcohol (EVOH) components were irradiated to target doses of 30, 45, and 60 kGy by gamma-ray, e-beam, and X-ray sources. Effects of irradiation were evaluated on 12 material properties, and statistical comparisons between gamma irradiation and alternative technologies were conducted using the two one-sided t-test (or “equivalence test”) and classic t-test. Melting temperature and UV absorbance below 300 nm showed dose dependencies, while other investigated properties such as discoloration and mechanical durability did not change with dose up to 60 kGy. Based on these results, there is no material compatibility issue associated with the transition from gamma to e-beam or to X-ray as source of sterilization radiation of the studied multi-layer film.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

Effects of residue removal and tillage on greenhouse gas emissions in continuous corn systems as simulated with RZWQM2

Agricultural production is a major source of carbon dioxide (CO 2 ) and nitrous oxide (N 2 O) globally. The effects of conservation practices on soil CO 2 and N 2 O emissions remain a high degree of uncertainty. In this study, soil CO 2 and N 2 O emissions under different residue and tillage practices in an irrigated, continuous corn system, were investigated using the Root Zone Water Quality Model (RZWQM2). Combinations of no/high stover removal (NR and HR, respectively) and no-till/conventional tillage (NT and CT, respectively) field experiments were tested over the four crop-years (Apr. 2011–Apr. 2015). The model was calibrated using the NRCT, and validated with other treatments. The simulation results showed that soil volumetric water content (VWC) in the NR treatments (i.e., NRCT and NRNT) was 1.3%–1.9% higher than that in the HR treatments (i.e., HRCT and HRNT) averaged across the four years. A higher amount of CO 2 and N 2 O emissions were simulated in the NRCT across the four years (annual average: 7034 kg C/ha/yr for CO 2 and 3.8 kg N/ha/yr for N 2 O), and lower emissions were in the HRNT (annual average: 6329 kg C/ha/yr and 3.7 kg N/ha/yr for N 2 O). A long-term simulation (2001–2015) suggested that the CO 2 and N 2 O emissions were closely correlated with the stover removal degree (SRD), tillage, VWC, soil temperature (ST), years in management (Y), and fertilizer application. Stover and tillage practices had cumulative effects on CO 2 emissions. The simulated annual CO 2 emissions in 1st year from NRCT, NRNT, and HRCT were 7.8%, 0.0%, and 7.7% higher than that from HRNT, respectively; then the emissions in 15th year were 63.6%, 47.7%, and 29.1% higher, respectively. Meanwhile, there were no cumulative effects on N 2 O emissions. Furthermore, the results also demonstrated that the RZWQM2 is a promising tool for evaluating the long-term effects of CO 2 and N 2 O emissions on different conservation practices.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

A Parameterization of Sub-grid Topographical Effects on Solar Radiation in the E3SM Land Model (Version 1.0): Implementation and Evaluation Over the Tibetan Plateau

Topography exerts significant influences on the incoming solar radiation at the land surface. A few stand-alone regional and global atmospheric models have included parameterizations for sub-grid topographic effects on solar radiation. However, nearly all Earth System Models (ESMs) that participated in the Coupled Model Intercomparison Project (CMIP6) use a plane-parallel (PP) radiative transfer scheme that assumes the terrain is flat. In this study, we incorporated a well-validated sub-grid topographic (TOP) parameterization in the Energy Exascale Earth System Model (E3SM) Land Model (ELM) version 1.0 to quantify the effects of sub-grid topography on solar radiation flux, including the shadow effects and multi-scattering between adjacent terrain. The Moderate Resolution Imaging Spectroradiometer (MODIS) data was used to evaluate the performance of ELM. We studied the role of sub-grid topography by performing ELM simulations with the PP and TOP schemes over the Tibetan Plateau (TP). Additional ELM simulations were performed at multiple spatial resolutions to investigate the role of spatial scale on sub-grid topographic effects on solar radiation. When compared to MODIS data, incorporating the sub-grid topographic effects overall reduces the biases of ELM in simulating surface energy balance, snow cover and surface temperature especially in the high-elevation and snow-cover regions over the TP. Topography has non-negligible effects on surface energy budget, snow cover, and surface temperature over the TP. The absolute differences in surface energy fluxes for net solar radiation, latent heat flux, and sensible heat flux between TOP and PP exceed 20 W/m 2 , 10 W/m 2 , and 5 W/m 2 , respectively. The differences in land surface albedo, snow cover fraction, and surface temperature between TOP and PP exceed 0.1, 20%, and 1K, respectively. The magnitude of the sub-grid topographic effects is dependent on seasons and elevations, and is also sensitive to the spatial scales. Although the sub-grid topographic effects on solar radiation are more significant with more spatial details at finer spatial scales, they cannot be simply neglected at coarse spatial scales. The inclusion of sub-grid topographic effects on solar radiation parameterization in ELM will contribute to advancing our understanding of the role of the surface topography on terrestrial processes over complex terrain.

58 GEOSCIENCES↗
DOE OSTI2022

The effects of bias, drift, and trends in calculating anomalies for evaluating skill of seasonal-to-decadal initialized climate predictions

In initialized seasonal to decadal (S2D) predictions, model hindcasts rapidly drift away from the initial observed state and converge toward a preferred state characterized by systematic error, or bias. Bias and drift are among the greatest challenges facing initialized prediction today. Differences in trends between initial states and drifted states, combined with bias and drift, introduce complexities in calculating anomalies to assess skill of initialized predictions. We examine several methods of calculating anomalies using the Decadal Prediction Large Ensemble (DPLE) using the Community Earth System Model (CESM) initialized hindcasts and focus on Pacific and Atlantic SSTs to illustrate issues with anomaly calculations. Three methods of computing anomalies, one as differences from a long term model climatology, another as bias-adjusted differences from the previous 15 year average from observations, and a third as differences from the previous 15 year average from the model, are contrasted and each is shown to have limitations. For the first, trends in bias and drift introduce higher skill estimates earlier and later in the hindcast period due to the trends that contribute to skill. For the second, higher skill can be introduced in situations where low frequency variability in the observations is large compared to the hindcasts on timescales greater than 15 years, while lower skill can result if the predicted signal is small and the bias-correction itself produces a transition of SST anomalies to the opposite sign of those that are observed. The third method has somewhat lower skill compared to each of the others, but has less difficulties with not only the long term trends in the model climatology, but also with the unrealistic situational skill from using observations as a reference. However, the first 15 years of the hindcast period cannot be evaluated due to having to wait to accumulate the previous 15 year model climatology before the method can be applied. Here, the IPO transition in the 2014–2016 time frame from negative to positive (predicted by Meehl et al. in in Nat Commun, 10.1038/NCOMMS11718, 2016) did indeed verify using all three methods, though each provides somewhat different skill values as a result of the respective limitations. There is no clear best method, as all are roughly comparable, and each has its own set of limitations and caveats. However, all three methods show generally higher overall skill in the AMO region compared to the IPO region.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2019

Research on stability and uniformity of multi-wavelength Brillouin-erbium fiber laser based on FWM

In this paper, we experimentally and theoretically investigate the stability and uniformity of multi-wavelength Brillouin-erbium fiber laser based on four-wave mixing (FWM). Multi-wavelength generation is limited by cross-gain saturation between different wavelengths from homogeneous broadening of erbium-doped fiber. Modeling coupled-mode equation for FWM and analyzing the influence of FWM on multi-wavelength generation. 16 orders Brillouin Stokes (BS) waves with a wavelength spacing of 0.084 nm are obtained experimentally within a 3 dB bandwidth by the FWM effect in a 100 m highly nonlinear fiber (HNLF), power distribution of each laser is uniform and peak power fluctuation is less than 1.184 dB within a 10 dB bandwidth, the outputs exhibit good time stability and uniformity. Compared with the same configuration, the laser without HNLF has only 9 orders stable BS waves within 3 dB bandwidth, and high-order Stokes wave shows significant waveform jitter and power fluctuation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Creep Deformation and Damage Mechanisms in an Advanced High-Temperature Additively Manufactured Nickel-Base Superalloy

Abstract This research investigates the processing–structure–properties–performance relationship in a novel nickel-base superalloy, ABD ® -900AM, designed for extreme environments. Specifically tailored for additive manufacturing (AM), ABD ® -900AM maintains mechanical integrity at high temperatures and is comparable to other nickel-based superalloys with a 30–40% gamma-prime volume fraction. A comprehensive study was conducted using laser-beam powder bed fusion and electron-beam powder bed fusion methods. Factors such as heat treatment, porosity, build orientation, and hot isostatic pressing were evaluated to understand their effects on microstructure and mechanical performance. Microstructural characterization revealed significant differences in grain size and orientation across build processes and heat treatments. High-temperature mechanical testing indicated that grain size, heat treatment, and orientation significantly influence creep behavior. A super-solvus heat treatment led to recrystallization and grain growth, significantly improving creep properties compared to a near-solvus heat treatment. Various creep mechanisms were identified across different conditions, and creep rupture models were developed for each build process. Post-test microstructural analysis showed grain boundary damage, with differences in creep cavitation morphology under varying stress conditions. It was shown that MC carbides grow at the expense of gamma-prime near grain boundaries, leading to precipitate-free zones in specimens tested at higher temperatures. This study fills a significant gap in fundamental research by offering a deeper insight into the high-temperature mechanical behavior of additively manufactured nickel-base superalloys. It also explores critical research questions regarding the role of carbides and the significance of heat treatment. The insights gained enhance confidence in the industry adoption of ABD ® -900AM and similar alloys for high-temperature applications, bridging the knowledge gap and supporting the development of reliable AM processes for extreme environments.

Bridges, Alex (ORCID:000000030338759X)↗
DOE OSTI2025

Further Development of the Tamped Richtmyer-Meshkov Instability Method and Application to Molybdenum Dynamic Strength Calibration and Tabulation

The high pressure and high strain rate dynamic strength of Mo is experimentally and computationally investigated in the 3–20 GPa stress, 50–600 C temperature, and 10 5 –10 6 /s strain rate regimes using a modified tamped Richtmyer-Meshkov instability (RMI) method. Modifications to the tamped RMI method include a method to determine loading states during strain, a new strength calibration function based on interface shape, and a robust uncertainty quantification method. These modifications improve fidelity of the tamped RMI method, allowing evaluation of the compensating effects of pressure hardening, strain rate hardening, strain hardening, and thermal softening. The new calibration function based on interface shape is not limited to sinusoidal corrugations and could be applied to additional interface shapes. Plate impact experiments are performed at Argonne National Laboratory’s Advanced Photon Source’s Dynamic Compression Sector operated by Washington State University (DCS), driving a planar shock front through a corrugated Mo-D 2 O or Mo-C 8 F 18 interface, forcing the corrugation to significantly deform. The extent of interfacial deformation, RMI growth, is experimentally observed using X-ray phase contrast imaging at the DCS. RMI jet lengths and jet shapes are extracted from the experimental radiographs, then used to calibrate numerical simulations performed with the Sandia National Laboratories (SNL) hydrocode CTH. Mo yield strength, Y, as a function of shock pressure, P, strain rate, $\dot{\varepsilon }$, accumulated strain, ϵ, relative volumetric compression, RD , and temperature, T , is determined for each impact experiment and presented. The calibrated Mo yield strength values range 1.2–1.8 GPa, with strength generally decreasing as the impact stress increases. This trend is likely caused by thermal softening or strain localization. The tabular yield strength versus loading condition data presented in this paper can be used to fit complex strength models.

Voorhees, T. J. [Sandia National Lab. (SNL-CA), Li↗
DOE OSTI2022

Biocatalytic system for comparatively assessing the functional association of monolignol cytochrome P450 monooxygenases with their redox partners

Lignin is a complex heterogenous polymer derived from oxidative radical polymerization of three monolignols, i.e., p-coumaryl alcohol, coniferyl alcohol and sinapyl alcohol. These lignin monomeric precursors structurally differ in their methoxy groups of the benzene rings. In phenylpropanoid-monolignol biosynthetic pathway, the endoplasmic reticulum (ER)-resident cytochrome P450 monooxygenases, cinnamate 4-hydroxylase, coumaroyl ester 3´-hydroxylase and ferulate 5-hydroxylase, establish the key structural characteristics of monolignols. The catalysis of cytochrome P450 monooxygenase requires reducing power, which is supplied by the ER electron transfer chains, composed of cytochrome P450 oxidoreductase (CPR), cytochrome b5 reductase (CBR) and/or cytochrome b5 protein (CB5), from cofactor NADPH or NADH. While NADPH-dependent CPR serves as the typical electron donor for most P450 enzymes, in some cases, the CBR-CB5 or CPR-CB5 electron transfer system also transfers electrons to the terminal P450 enzymes. There are tremendous studies focusing on the discovery and characterization of cytochrome P450 monooxygenases. However, very limited attention has been paid to the versatility and the roles of electron transfer components in the P450 catalytic system. Due to the membrane-residence property of both P450 enzymes and electron transfer components, it is challenging to establish an effective experimental system to evaluate the functional association of P450s with their redox partners. This chapter describes a yeast cell biocatalytic system and the related experimental procedures for comparatively assessing the functional relationship of monolignol biosynthetic P450 enzymes and different redox partners in their catalysis.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Neutron heating assessment in Minerve reactor by using alanine/ESR dosimetry

In the framework of the ICERR (International Center based on Research Reactors) project, the effect of neutron/gamma irradiation on material and dosimeters has been studied. In this work, we explore the alanine dose-response in the core of the MINERVE research reactor at the CEA Cadarache and we investigate the neutron heating effects in order to evaluate alanine neutron sensitivity. The measured dose of the alanine detector in the mixed gamma-neutron field was estimated by electron spin resonance spectrometry (ESR) with reference to an absorbed dose in water from a 60 Co gamma-ray beam. The experimental sources of uncertainties were reduced by using the optimum conditions of charged-particle equilibrium (CPE), obtained by introducing alanine dosimeters into the aluminum pillbox. Cavity correction factors and dose components were evaluated by the Monte Carlo code MCNP. The calculation showed an underestimated neutron dose with a (C/E) value of about 0.993 +/- 10.83%(k = 1). Results indicate that the fast neutron dose, mainly due to elastic neutron scattering on hydrogen nuclei, represents about 70% of the total dose, while the gamma dose was found to be around 45% of the neutron dose. Additionally, the neutron relative efficiency (REn) to 60 Co gamma-radiation was estimated to be 0.544 +/- 8%(k = 1).

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2020

Excessive radon-based radiation in indoor air caused by soil building materials in traditional homes on Đồng Văn karst plateau, northern Vietnam

Radon-based radiation from natural soil building materials is an important factor likely influencing residents’ health as a contributing source of natural radiation. This work aims to quantify the nuclide-specific α-radiation of isotopes 222 Rn and 220 Rn in common types of houses in a region of northern Vietnam, Ɖông Văn karst plateau, to preliminarily (i) evaluate the total annual effective dose rates and (ii) assess the relative risk of cancer induction from indoor α-radiation for inhabitants. The average 222 Rn concentrations in all house types were lower than 100 Bq m -3 , but 220 Rn abundances were far higher than 222 Rn, even up to >1000 Bq m -3 in air close to a wall of unfired-soil bricks. The estimated total annual effective dose rates from indoor 222 Rn and 220 Rn and their progenies to residents with daily exposure of 13 h in the various types of houses range from 3.1 to 4.3 mSv a -1 for houses constructed with modified materials, but up to higher than 6 mSv a -1 in houses with raw building materials. The average risk of developing lung cancer as a consequence of a lifetime exposure to indoor α-radiation in affected homes ranges from 3.9% to 14.6%. 220 Rn and its metallic progenies contribute more than 80% of the total average lung cancer risk from total radon, being responsible for a range of 2.7–14.6% of the risk of developing lung cancer.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Medium-scale to large-scale implementation of cyber-physical human experiments in live traffic

Autonomous Vehicles (AVs) such as cars and trucks are being developed and tested as Cyber-Physical Human systems while the technology improves. Before these systems can achieve full autonomy, some serve as tools in the form of adaptive cruise control. The CIRCLES Consortium investigates the potential for AVs to increase fuel efficiency of highway traffic by smoothing “stop-and-go” traffic waves that result from normal human driving behavior in congestion. We have performed an experiment to evaluate the real world effects of implementing this strategy. A medium-scale experiment was performed on I-24 near Nashville, TN in August 2021. This was a precursor to a larger experiment that will take place November 2022. We examine how the human part of the experiment will change as we scale up from an 11 vehicle test (four AVs) to 100 AVs. There are many solutions to problems of the medium-scale experiment that would be inconvenient, complicate the experience, or not be practicable. The medium-scale experiment involved 11 cars of which four had a custom control algorithm installed to be engaged by the driver. The large-scale experiment will have 100 cars, all with custom control algorithm installed to act on traffic when the controller is engaged. We examine key choices made for the medium experiment, and how some will be different for the large experiment. Our experience performing the medium-scale experiment has made it clear that repeating our methods from this smaller one are inefficient or impossible if used for the large-scale experiment and will be improved.

McQuade, Sean T.↗