Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Pressure and doping dependent elastic and thermodynamical properties of Ga{sub 1-x}In{sub x}P mixed valent compounds

Using a phenomenological lattice model incorporating the long-range Coulomb and charge transfer caused by the deformation of the electron shells of the overlapping ions and the Hafemeister and Flygare type short-range overlap repulsion extended upto the second neighbor ions and the van der Waals (vdW) interaction, we present a comprehensive study to understand the effects of pressure on the elastic behavior as ductility (brittleness) and thermodynamical properties of Ga{sub 1-x}In{sub x}P. Estimated phase-transition pressure and the vast volume discontinuity in pressure-volume phase diagram confirm the structural phase transition from zinc blende (B3) to rock salt (B1) phase. From the elastic constants the Poisson's ratio {nu}, the ratio R{sub S/B} of S (Voigt averaged shear modulus) over B (bulk modulus), elastic wave velocity, average wave velocity and thermodynamical property Debye temperature is calculated. The Poisson's ratio {nu} and the ratio R{sub S/B} allows one to conclude that Ga{sub 1-x}In{sub x}P is brittle in zinc blende (B3) and ductile nature is inferred in sodium chloride (B1) phase. To our knowledge this is the first quantitative theoretical prediction of the doping and pressure dependent elastic properties for mixed valent Ga{sub 1-x}In{sub x}P compounds and still awaits experimental confirmations.

36 MATERIALS SCIENCE↗

Analysis of the structural, electronic, elastic and thermodynamic properties of CuAl2X4 (X = O, S) spinel structure

Highlights: • Fundamental properties of CuAl{sub 2}X{sub 4} (X = O, S) aluminate spinels have been investigated. • The pressure dependence of the elastic constants C{sub ij} can be successfully fit by a straight line. • CuAl{sub 2}X{sub 4} (X = O, S) compounds are mechanically stable at ambient conditions. • Temperature and pressure dependences of some macroscopic parameters are achieved. - Abstract: The structural, electronic, elastic and thermodynamic properties of oxo- and thio-spinels have been predicted based on the ultrasoft pseudo-potential scheme as implemented in the CASTEP code. The exchange-correlation potential was treated within the generalized gradient approximation (GGA-PBE). The calculated structural parameters such as lattice constants and internal parameters are in good agreement with the available experimental data. The ground state electronic band structure revealed that CuAl{sub 2}X{sub 4} (XO, S) spinels are direct band gap semiconductors with a transition along Γ-Γ symmetry points. The calculated values of elastic constants satisfy the Born criteria at ambient conditions and confirm that the spinel structures of CuAl{sub 2}O{sub 4} and CuAl{sub 2}S{sub 4} are mechanically stable. The thiospinel structure may have a phase transition under pressure, due to the negative value of C{sub 44}. The influence of temperature and pressure on macroscopic characteristics of CuAl{sub 2}O{sub 4} and CuAl{sub 2}S{sub 4} compounds was estimated using the quasi-harmonic Debye model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic and Magnetic Properties of Cubic Fe{sub 4}C from First-Principles

First-principles calculations, based on density functional theory (DFT), are used to study the phase stability, elastic, magnetic, and electronic properties of cubic (c)-Fe{sub 4}C. Our results show that c-Fe{sub 4}C has ferromagnetic (FM) ground state as compared with antiferromagnetic (AFM) and nonmagnetic (NM) states. To study the phase stability of c-Fe{sub 4}C, BCC Fe{sub 4}C, FCC Fe{sub 4}C, and BCC Fe{sub 16}C, where C is considered at tetrahedral and octahedral interstitial sites, are also considered. The formation energy of c-Fe{sub 4}C is smaller than BCC Fe{sub 4}C but the shear moduli of c-Fe{sub 4}C is negative in both the FM and AFM states indicating that c-Fe{sub 4}C is dynamically not stable in the magnetic (FM/AFM) state. NM state has positive shear moduli which illustrates that the instability in c-Fe{sub 4}C is due to magnetism and can lead to soft phonon modes. The calculated formation energy also shows that c-Fe{sub 4}C has higher formation energy than the FCC Fe{sub 4}C indicating no possibility of c-Fe{sub 4}C in low carbon steels at low temperature. The magnetic moment of Fe in c-Fe{sub 4}C is also sensitive to lattice deformation and the electronic structure reveals the itinerant nature of electrons responsible for metallic behavior of c-Fe{sub 4}C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab initio studies of structural, electronic, optical, elastic and thermal properties of silver gallium dichalcogenides (AgGaX{sub 2}: X = S, Se, Te)

Graphical abstract: - Highlights: • FP-LAPW method has been used to compute the solid state properties of AgGaX{sub 2} (X = S, Se, Te). • Electronic and optical properties reported with recently developed mBJ potential. • Thermal expansion, heat capacity, Debye temperature, entropy and Grüneisen parameter were evaluated. • Hardness was calculated for the first time at different temperature and pressure. - Abstract: We have performed ab initio calculations for the structural, electronic, optical, elastic and thermal properties of the silver gallium dichalcogenides (AgGaX{sub 2}: X = S, Se, Te). In this study, we have used the accurate full potential linearized augmented plane wave (FP-LAPW) method to find the equilibrium structural parameters and to compute the six elastic constants (C{sub 11}, C{sub 12}, C{sub 13}, C{sub 33}, C{sub 44} and C{sub 66}). We have reported electronic and optical properties with the recently developed density functional theory of Tran and Blaha, and this theory is used along with the Wu-Cohen generalized gradient approximation (WC-GGA) for the exchange-correlation potential. Furthermore, optical features such as dielectric functions, refractive indices, extinction coefficient, optical reflectivity, absorption coefficients and optical conductivities were calculated for photon energies up to 40 eV. The thermodynamical properties such as thermal expansion, heat capacity, debye temperature, entropy, Grüneisen parameter and bulk modulus were calculated employing the quasi-harmonic Debye model at different temperatures (0–900 K) and pressures (0–8 GPa) and the silent results were interpreted. Hardness of the materials was calculated for the first time at different temperatures and pressures.

36 MATERIALS SCIENCE↗

High-pressure structural, elastic, and thermodynamic properties of zircon-type HoPO 4 and TmPO 4

Zircon-type holmium phosphate (HoPO 4 ) and thulium phosphate (TmPO 4 ) have been studied by single-crystal x-ray diffraction and ab initio calculations. We report on the influence of pressure on the crystal structure, and on the elastic and thermodynamic properties. The equation of state for both compounds is accurately determined. We have also obtained information on the polyhedral compressibility which is used to explain the anisotropic axial compressibility and the bulk compressibility. Both compounds are ductile and more resistive to volume compression than to shear deformation at all pressures. Furthermore, the elastic anisotropy is enhanced upon compression. Finally, the calculations indicate that the possible causes that make the zircon structure unstable are mechanical instabilities and the softening of a silent B 1u mode.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Elastic and Piezoelectric Properties of Boron Nitride Nanotube Composites: Finite Element Model - Part II

This paper is the second part of a two-part series where the first part presents a molecular dynamics model of a single Boron Nitride Nanotube (BNNT) and this paper scales up to multiple BNNTs in a polymer matrix. This paper presents finite element (FE) models to investigate the effective elastic and piezoelectric properties of (BNNT) nanocomposites. The nanocomposites studied in this paper are thin films of polymer matrix with aligned co-planar BNNTs. The FE modelling approach provides a computationally efficient way to gain an understanding of the material properties. We examine several FE models to identify the most suitable models and investigate the effective properties with respect to the BNNT volume fraction and the number of nanotube walls. The FE models are constructed to represent aligned and randomly distributed BNNTs in a matrix of resin using 2D and 3D hollow and 3D filled cylinders. The homogenisation approach is employed to determine the overall elastic and piezoelectric constants for a range of volume fractions. These models are compared with an analytical model based on Mori-Tanaka formulation suitable for finite length cylindrical inclusions. The model applies to primarily single-wall BNNTs but is also extended to multi-wall BNNTs, for which preliminary results will be presented. Results from the Part 1 of this series can help to establish a constitutive relationship for input into the finite element model to enable the modeling of multiple BNNTs in a polymer matrix.

Kim, H. Alicia↗

Study of Elastic and Structural Properties of BaFe2As2 Ultrathin Film Using Picosecond Ultrasonics

We obtain the through-thickness elastic stiffness coefficient (C33) in nominal 9 nm and 60 nm BaFe2As2 (Ba-122) thin films by using picosecond ultrasonics. Particularly, we reveal the increase in elastic stiffness as film thickness decreases from bulk value down to 9 nm, which we attribute to the increase in intrinsic strain near the film-substrate interface. Our density functional theory (DFT) calculations reproduce the observed acoustic oscillation frequencies well. In addition, temperature dependence of longitudinal acoustic (LA) phonon mode frequency for 9 nm Ba-122 thin film is reported. The frequency change is attributed to the change in Ba-122 orthorhombicity (a−b)/(a+b). This conclusion can be corroborated by our previous ultrafast ellipticity measurements in 9 nm Ba-122 thin film, which exhibit strong temperature dependence and indicate the structural phase transition temperature Ts.

36 MATERIALS SCIENCE↗

On the gain properties of “thin” elastically strained InGaAs/InGaAlAs quantum wells emitting in the near-infrared spectral region near 1550 nm

The results of experimental studies of the gain properties of “thin” (3.2 nm thick) elastically strained InGaAs/InGaAlAs quantum wells emitting in the near-infrared spectral region near 1550 nm are presented. The results of studying the threshold and gain characteristics of stripe laser diodes with active regions based on “thin” quantum wells with a lattice–substrate mismatch of +1.0% show that the quantum wells under study exhibit a high modal gain of 11 cm{sup –1} and a low transparency current density of 46 A/cm{sup 2} per quantum well.

36 MATERIALS SCIENCE↗

First-principles study of structural, elastic, electronic, transport properties, and dielectric breakdown of Cs 2 Te photocathode

The pursuit to operate photocathodes at high accelerating gradients to increase brightness of electron beams is gaining interests within the accelerator community, particularly for applications such as free electron lasers (FEL) and compact accelerators. Cesium telluride (Cs 2 Te) is a widely used photocathode material and it is presumed to offer resilience to higher gradients because of its wider band gap compared to other semiconductors. Despite its advantages, crucial material properties of Cs 2 Te remain largely unknown both in theory and experiments. In this study, we employ first-principles calculations to provide detailed structural, elastic, electronic and transport properties of Cs 2 Te. It is found that Cs 2 Te has an intrinsic mobility of 20 cm 2 /Vs for electrons and 2.0 cm 2 /Vs for holes at room temperature. The low mobility is primarily limited by the strong polar optical phonon scattering. Cs 2 Te also exhibits ultralow lattice thermal conductivity of 0.2 W/(m*K) at room temperature. Based on the energy gain/loss balance under external field and electron–phonon scattering, we predict that Cs 2 Te has a dielectric breakdown field in the range from ~ 60 to ~ 132 MV/m at room temperature dependent on the doping level of Cs 2 Te. Our results are crucial to advance the understanding of applicability of Cs 2 Te photocathodes for high-gradient operation.

36 MATERIALS SCIENCE↗

Stable dielectric, elastic, and piezoelectric properties of Yb3+:CNGS crystals at high temperature

Highlights: • Single crystals Yb:CNGS with high quality have been successfully grown using the Czochralski method. • The dielectric, elastic and piezoelectric coefficients are measured and calculated according to the impedance method. • Piezoelectricity and dielectric properties at room temperature and elevated temperature are investigated for the first time. • The doped crystals show good temperature stability at elevated temperature condition. - Abstract: In this study, Yb{sup 3+}:Ca{sub 3}NbGa{sub 3}Si{sub 2}O{sub 14} (Yb{sup 3+}:CNGS) single crystals with different doping concentrations (2 and 5 at%) were grown using the Czochralski method. The dielectric, elastic, and piezoelectric coefficients at room temperature and elevated temperature were measured and calculated according to the impedance method for the first time. Crystals show excellent piezoelectricity and exhibit favorable temperature stability from room temperature to 800 °C. The transmittance spectrum of the Yb{sup 3+}:CNGS crystals is also recorded, and the results prove the high optical quality of these crystals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculations of the Structural, Elastic, Magnetic, and Electronic Properties of the New Compound BaZr{sub 0.5}Mn{sub 0.5}O{sub 3} with Tetragonal Structure

Based on the density functional theory, we have calculated the structural properties of the BaZrO{sub 3} (BZO) cubic structure with PBE-GGA, PBEsol-GGA, and LDA approximations. The equilibrium lattice constant within GGA-PBEsol (a = 4.1847 Å) is in very good agreement with the experimental data (Holland and Redfern, Miner. Mag. 61: 65, 1997). The calculations of elastic properties of pure and doped BaZrO{sub 3} are calculated with PBEsol-GGA; both BZO and BZM are compressible and show a brittle nature. According to calculated electronic and magnetic properties, it is found that Mn-doped BaZrO{sub 3} system is a half metallic and exhibits a ferromagnetic character. The total magnetic moment of the cell is equal to3.57 µ{sub B}; this value comes from manganese atom (Mn) with a value of 3.176 µ{sub B}. The magnetic moments of barium, oxygen, and zirconium atoms are approximately equal to zero.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Calculations of structural, elastic, electronic, magnetic and phonon properties of FeNiMnAl by the first principles

The electronic, elastic and dynamical properties of the quaternary alloy FeNiMnAl have been investigated using a pseudopotential plane wave method within the generalized gradient approximation (GGA). We determined the lattice parameters and the bulk modulus B. In addition, the elastic properties such as elastic constans (C{sub 11}, C{sub 12} and C{sub 44}), the shear modulus G, the young modulus E, the poisson's ratio σ and the B/G ratio are also given. The FeNiMnAl Heusler alloy exhibit a ferromagnetic half-metallic behavior with the total magnetic moment of 4.02 μ{sub B}. The phonon dispersion of FeNiMnAl has been performed using the density functional theory and the direct method with 2×2×2 supercell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of assumed tow architecture on the predicted moduli and stresses in woven composites

This study deals with the effect of assumed tow architecture on the elastic material properties and stress distributions of plain weave woven composites. Specifically, the examination of how a cross-section is assumed to sweep-out the tows of the composite is examined in great detail. The two methods studied are extrusion and translation. This effect is also examined to determine how sensitive this assumption is to changes in waviness ratio. 3D finite elements were used to study a T300/Epoxy plain weave composite with symmetrically stacked mats. 1/32nd of the unit cell is shown to be adequate for analysis of this type of configuration with the appropriate set of boundary conditions. At low waviness, results indicate that for prediction of elastic properties, either method is adequate. At high waviness, certain elastic properties become more sensitive to the method used. Stress distributions at high waviness ratio are shown to vary greatly depending on the type of loading applied. At low waviness, both methods produce similar results.

Chapman, Clinton Dane↗

FP-LAPW study of structural, electronic, elastic, mechanical and thermal properties of AlFe intermetallic

The structural, electronic, elastic, mechanical and thermal properties of AlFe intermetallic compound in B{sub 2}-type (CsCl) structure have been investigated using first-principles calculations. The exchange-correlation term was treated within generalized gradient approximation. Ground state properties i.e. lattice constants (a{sub 0}), bulk modulus (B) and first-order pressure derivative of bulk modulus (B’) are presented. The density of states are derived which show the metallic character of present compound. Our results for C{sub 11}, C{sub 12} and C{sub 44} agree well with previous theoretical data. Using Pugh’s criteria (B/G{sub H} < 1.75), brittle character of AlFe is satisfied. In addition shear modulus (G{sub H}), Young’s modulus (E), sound wave velocities and Debye temperature (θ{sub D}) have also been estimated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A micromechanical approach to elastic and viscoelastic properties of fiber reinforced concrete

Some aspects of the constitutive behavior of fiber reinforced concrete (FRC) are investigated within a micromechanical framework. Special emphasis is put on the prediction of creep of such materials. The linear elastic behavior is first examined by implementation of a Mori-Tanaka homogenization scheme. The micromechanical predictions for the overall stiffness prove to be very close to finite element solutions obtained from the numerical analysis of a representative elementary volume of FRC modeled as a randomly heterogeneous medium. The validation of the micromechanical concepts based on comparison with a set of experiments, shows remarkable predictive capabilities of the micromechanical representation. The second part of the paper is devoted to non-ageing viscoelasticity of FRC. Adopting a Zener model for the behavior of the concrete matrix and making use of the correspondence principle, the homogenized relaxation moduli are derived analytically. The validity of the model is established by mean of comparison with available experiment measurements of creep strain of steel fiber reinforced concrete under compressive load. Finally, the model predictions are compared to those derived from analytical models formulated within a one-dimensional setting.

36 MATERIALS SCIENCE↗

Advanced Technologies for Monitoring CO2 Saturation and Pore Pressure in Geologic Formations: Linking the Chemical and Physical Effects to Elastic and Transport Properties

Ultrasonic P- and S-wave velocities were measured over a range of confining pressures while injecting CO2 and brine into the samples. Pore fluid pressure was also varied and monitored together with porosity during injection. Effective medium models were developed to understand the mechanisms and impact of observed changes and to provide the means for implementation of the interpretation methodologies in the field. Ultrasonic P- and S-wave velocities in carbonate rocks show as much as 20-50% decrease after injection of the reactive CO2-brine mixture; the changes were caused by permanent changes to the rock elastic frame associated with dissolution of mineral. Velocity decreases were observed under both dry and fluid-saturated conditions, and the amount of change was correlated with the initial pore fabrics. Scanning Electron Microscope images of carbonate rock microstructures were taken before and after injection of CO2-rich water. The images reveal enlargement of the pores, dissolution of micrite (micron-scale calcite crystals), and pitting of grain surfaces caused by the fluid- solid chemical reactivity. The magnitude of the changes correlates with the rock microtexture – tight, high surface area samples showed the largest changes in permeability and smallest changes in porosity and elastic stiffness compared to those in rocks with looser texture and larger intergranular pore space. Changes to the pore space also occurred from flow of fine particles with the injected fluid. Carbonates with grain-coating materials, such as residual oil, experienced very little permanent change during injection. In the tight micrite/spar cement component, dissolution is controlled by diffusion: the mass transfer of products and reactants is thus slow and the fluid is expected to be close to thermodynamical equilibrium with the calcite, leading to very little dissolution, or even precipitation. In the microporous rounded micrite and macropores, dissolution is controlled by advection: because of an efficient mass transfer of reactants and products, the fluid remains acidic, far from thermodynamical equilibrium and the dissolution of calcite is important. These conclusions are consistent with the lab observations. Sandstones from the Tuscaloosa formation in Mississippi were also subjected to injection under representative in situ stress and pore pressure conditions. Again, both P- and S-wave velocities decreased with injection. Time-lapse SEM images indicated permanent changes induced in the sandstone microstructure by chamosite dissolution upon injection of CO2-rich brine. After injection, the sandstone showed an overall cleaner microstructure. Two main changes are involved: (a) clay dissolution between grains and at the grain contact and (b) rearrangement of grains due to compaction under pressure Theoretical and empirical models were developed to quantify the elastic changes associated with injection. Permanent changes to the rock frame resulted in seismic velocity-porosity trends that mimic natural diagenetic changes. Hence, when laboratory measurments are not available for a candidate site, these trends can be estimated from depth trends in well logs. New theoretical equations were developed to predict the changes in elastic moduli upon substitution of pore-filling material. These equations reduce to Gassmann’s equations for the case of constant frame properties, low seismic frequencies, and fluid changes in the pore space. The new models also predict the change dissolution or precipitation of mineral, which cannot be described with the conventional Gassmann theory.

Mavko, G.↗

Vibrational, elastic, and structural properties of cubic silicon carbide under pressure up to 75 GPa: Implication for a primary pressure scale

We present results of concomitant measurements of synchrotron x-ray diffraction (XRD), Brillouin, and Raman spectroscopy on the single crystal samples of cubic silicon carbide (3C-SiC) under quasi-hydrostatic pressures up to 65 GPa, as well as x-ray diffraction and Raman spectroscopy up to 75 GPa. We determined the equation of state of 3C-SiC and pressure dependencies of the zone-center phonon, elastic tensor, and mode Gruneisen parameters. Cubic SiC lattice was found to be stable up to 75 GPa, but there is a tendency for destabilization above 40 GPa, based on softening of a transverse sound velocity. By applying the concomitant density and elasticity measurements, we determined the pressure on the SiC sample without referring to any other pressure scale thus establishing a new primary pressure scale with a 2%–4% precision up to 65 GPa. We proposed corrections to the existing ruby and neon pressure scales, and also calibrated cubic SiC as a pressure marker for the x-ray diffraction and Raman experiments.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗