SEARCH · Engineering Papers

Results for “Data Packages”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

All sources NASA NTRS DOE OSTI

NASA NTRS2010

Satellite Data Simulator Unit: A Multisensor, Multispectral Satellite Simulator Package

Several multisensor simulator packages are being developed by different research groups across the world. Such simulator packages [e.g., COSP , CRTM, ECSIM, RTTO, ISSARS (under development), and SDSU (this article), among others] share overall aims, although some are targeted more on particular satellite programs or specific applications (for research purposes or for operational use) than others. The SDSU or Satellite Data Simulator Unit is a general-purpose simulator composed of Fortran 90 codes and applicable to spaceborne microwave radiometer, radar, and visible/infrared imagers including, but not limited to, the sensors listed in a table. That shows satellite programs particularly suitable for multisensor data analysis: some are single satellite missions carrying two or more instruments, while others are constellations of satellites flying in formation. The TRMM and A-Train are ongoing satellite missions carrying diverse sensors that observe clouds and precipitation, and will be continued or augmented within the decade to come by future multisensor missions such as the GPM and Earth-CARE. The ultimate goals of these present and proposed satellite programs are not restricted to clouds and precipitation but are to better understand their interactions with atmospheric dynamics/chemistry and feedback to climate. The SDSU's applicability is not technically limited to hydrometeor measurements either, but may be extended to air temperature and humidity observations by tuning the SDSU to sounding channels. As such, the SDSU and other multisensor simulators would potentially contribute to a broad area of climate and atmospheric sciences. The SDSU is not optimized to any particular orbital geometry of satellites. The SDSU is applicable not only to low-Earth orbiting platforms as listed in Table 1, but also to geostationary meteorological satellites. Although no geosynchronous satellite carries microwave instruments at present or in the near future, the SDSU would be useful for future geostationary satellites with a microwave radiometer and/or a radar aboard, which could become more feasible as engineering challenges are met. In this short article, the SDSU algorithm architecture and potential applications are reviewed in brief.

Masunaga, Hirohiko↗

DOE OSTI2023

Stabilizing a strongly nonlinear structure through shaker dynamics in fixed frequency voltage control tests

Bifurcations are commonly encountered during force controlled swept and stepped sine testing of nonlinear structures, which generally leads to the so-called jump-down or jump-up phenomena between stable solutions. There are various experimental closed-loop control algorithms, such as control-based continuation and phase-locked loop, to stabilize dynamical systems through these bifurcations, but they generally rely on specialized control algorithms that are not readily available with many commercial data acquisition software packages. A recent method was developed to experimentally apply sequential continuation using the shaker voltage that can be readily deployed using commercially available software. By utilizing the stabilizing effects of electrodynamic shakers and the force dropout phenomena in fixed frequency voltage control sine tests, this approach has been demonstrated to stabilize the unstable branch of a nonlinear system with three branches, allowing for three multivalued solutions to be identified within a specific frequency bandwidth near resonance. Recent testing on a strongly nonlinear system with vibro-impact nonlinearity has revealed jumping behavior when performing sequential continuation along the voltage parameter, like the jump phenomena seen during more traditional force controlled swept and stepped sine testing. Here, this paper investigates the stabilizing effects of an electrodynamic shaker on strongly nonlinear structures in fixed frequency voltage control tests using both numerical and experimental methods. The harmonic balance method is applied to the coupled shaker-structure system with an electromechanical model to simulate the fixed voltage control tests and predict the stabilization for different parameters of the model. The simulated results are leveraged to inform the design of a set of experiments to demonstrate the stabilization characteristics on a fixture-pylon assembly with a vibro-impact nonlinearity. Through numerical simulation and experimental testing on two different strongly nonlinear systems, the various parameters that influence the stability of the coupled shaker-structure are revealed to better understand the performance of fixed frequency voltage control tests.

42 ENGINEERING↗

DOE OSTI2021

Customs: Inspect and Report Python Imports (customs) v1.0.0

We have developed a simple, minimally invasive monitoring framework that enables us to capture key metrics from Python user processes. This is part of a larger effort to collect data across our entire data-intensive science workload at NERSC. The approach for Python is inspired by a similar framework developed for Blue Waters at NCSA. Both frameworks leverage standard Python features, sitecustomize and atexit, to capture Python imports of interest and other job data. The customs package decomposes the information capture into separate inspection and reporting interfaces.

Thomas, Rollin↗

DOE OSTI2024

MAPSTER

MAPSTER Observer is a light-weight software package that can be installed on field deployed computers which automatically manages data and creates metadata packages designed to organize large datasets, making them easy to retrieve and share.

Larson, MatthewD↗

DOE OSTI2024

Seedling nitrogen uptake and rhizodeposition between mycorrhizal types

Tree mycorrhizal associations are associated with patterns in N cycling and soil organic matter (SOM) storage, however, we still lack a mechanistic understanding of what tree and fungal traits drive these patterns and how they will respond to global changes in soil N availability. To address this knowledge gap, we investigated how arbuscular mycorrhizal (AM)- and ectomycorrhizal (EcM)-associated seedlings alter rhizodeposition in response to increased inorganic N acquisition. Specifically, we conducted this greenhouse experiment in a sealed labeling chamber with an enriched 13Carbon atmosphere and 15Nitrogen enriched fertilizer over the course of five months from April 2021 - August 2021. To include the variability across tree species, we grew eight species of seedlings belonging to eight families that were either arbuscular (Acer rubrum, Nyssa sylvatica, Thuja occidentalis, and Prunus seritina) or ectomycorrhizal-associated (Quercus rubra, Tilia americana, Pinus strobus, and Betula lenta). We measured rhizodeposition (mg 13C), plant N uptake from fertilizer (mg N), net soil carbon, and the abundance of mycorrhizal fungi (ITS sequencing and qPCR). We also characterized fungal (ITS2) and bacterial (16S) soil communities.The data from this project are ".csv" files that can up downloaded into a folder, and then run in the associated R markdown scripts after changing the source folder location at the top of the script. These data include raw outputs and processed files (using the R markdown files) for seedling growth and biomass, 15N content, soil 13C content, raw reads and processed file versions for fungal and bacterial ASVS, and a final summary file used for modeling. R software is needed to run these data, and the packages needed are listed at the top of the R markdown file.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

1H-NMR characterization of soil dissolved organic matter from soil samples in control and warming plots in Blodgett Forest, CA (2014 and 2018)

The pathways of carbon transport and loss through and from soils—soil organic matter (SOM) depolymerization to dissolved organic carbon and mineralization to carbon dioxide (CO2)—are fundamentally driven by microbial activity, which is strongly regulated by environmental conditions. As part of Lawrence Berkeley National Laboratory Terrestrial Ecosystem Science Belowground Biogeochemistry Science Focus Area (SFA), we have established a novel whole-soil long-term warming experiment at the University of California (UC) Blodgett Forest Research Station (Sierra Nevada) in 2014, where we study the role of biogeochemical, microbial and geochemical process interactions in SOM (soil organic matter) decomposition and stabilization. This package contains metabolite data obtained through 1H nuclear magnetic resonance (NMR) spectroscopy on water-extracted soils. Soil samples were collected in 2014/06/03 and 2018/06/04 from 3 replicated paired plots that had been subjected to experimental warming since June 2014 to simulate a predicted climate change scenario for northern California. The following files are included: (1) nmr_h2o_data_raw.csv: raw data, (2) nmr_h2o_data_processed.csv: computed compound concentrations and metadata, (3) nmr_h2o_compound_metadata.csv: compound metadata, (4) nmr_h2o_sample_metadata.csv: sample metadata

1H-NMR (nucleic magnetic resonance) spectroscopy↗

DOE OSTI2023

Design of a Cryogenic Scintillation Neutrino Detector at the Spallation Neutron Source

We successfully verified in the following three aspects the feasibility of using a cryogenic scintillating crystal-based neutrino detector at the Spallation Neutron Source (SNS), Oak Ridge National Laboratory, for the detection of low-mass dark matter particles and non-standard neutrino interactions (NSIs), as part of the detector R&D effort of the COHERENT experiment. First, we demonstrated the possibility of using silicon photomultipliers (SiPMs) at cryogenic temperatures to replace traditional photomultiplier tubes (PMTs) as light sensors. Second, we verified that the high light yield of undoped CsI crystals measured above 13 keVee at 77 K still holds down to 5.9 keVee. Third, we successfully measured nuclear quenching factor of undoped cryogenic CsI at the Triangle Universities Nuclear Laboratory with the help from our Duke collaborators. The first achievement resulted in a publication in European Physics Journal C. The second resulted in an arXiv pre-print, which is under journal review. The last one indicates that the performance of the proposed detector may be better than what was assumed in the literature. The analysis is in the final stage and will result in another journal publication. In addition, two graduate students involved in this project graduated with master’s degrees during the project period. Both decided to continue their research as PhD students. One open-source data analysis code package was created and is publicly available on GitHub. A set of tutorials about Monte Carlo simulation of radiation interacting with detectors were created on YouTube, receiving more than 100,000 views.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Physics-based modeling and data analytics [Slides]

This presentation contains a summary of ongoing work within the physics-based modeling and data analytics work package within the Nuclear Materials Discovery and Qualification initiative (NMDQi). Topics include work on MOOSE-based crystal plasticity, molecular dynamics modeling of recombination in metals and alloys, the MOOSE Stochastic Tools Module, and machine learning and atomistic modeling to predict thermo-kinetic properties of nuclear structural materials.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

An R Shiny graphical user interface for analyzing, visualizing, and interpreting high precision mass spectrometric data

There is currently a lack of software that meets the needs for the analysis of raw data produced by modern isotope ratio mass spectrometers for both R&D and routine use at SRNL and other US national labs • Needs to accommodate multiple isotope systems, instruments, and manufacturers • Include modern statistical methods and handling/visualization of uncertainty • Flexible software with transparent (no “black box”) and reproducible methods • This project is inspired by existing discipline-specific data analysis software (e.g., Tripoli1 , ET_Redux2 , IsoplotR3) used in the geochemical community • Our goal is to build an open source data analysis software package that focuses on flexibility, transparency, and reproducibility

Labone, Elizabeth↗

DOE OSTI2023

pygwb: A Python-based Library for Gravitational-wave Background Searches

The collection of gravitational waves (GWs) that are either too weak or too numerous to be individually resolved is commonly referred to as the gravitational-wave background (GWB). A confident detection and model-driven characterization of such a signal will provide invaluable information about the evolution of the universe and the population of GW sources within it. We present a new, user-friendly, Python-based package for GW data analysis to search for an isotropic GWB in ground-based interferometer data. We employ cross-correlation spectra of GW detector pairs to construct an optimal estimator of the Gaussian and isotropic GWB, and Bayesian parameter estimation to constrain GWB models. The modularity and clarity of the code allow for both a shallow learning curve and flexibility in adjusting the analysis to one’s own needs. We describe the individual modules that make up pygwb, following the traditional steps of stochastic analyses carried out within the LIGO, Virgo, and KAGRA Collaboration. We then describe the built-in pipeline that combines the different modules and validate it with both mock data and real GW data from the O3 Advanced LIGO and Virgo observing run. We successfully recover all mock data injections and reproduce published results.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2023

BOXKIT

SF-23-067 BoxKit is a library that provides building blocks to parallelize and scale data science, high performance computing, and machine learning applications for block-structured datasets. Spatial data from simulations and experiments can be accessed and managed using tools available in this library when working with more data analysis oriented packages like SciKit (https://github.com/scikit-learn/scikit-learn) and FlowNet (https://github.com/NVIDIA/flownet2-pytorch)

DHRUV, AKASH↗

NASA NTRS1972

Soil mechanical properties at the Apollo 14 site.

The Apollo 14 lunar landing provided a greater amount of information on the mechanical properties of the lunar soil than previous missions. Measurements on core-tube samples and the results of transporter track analyses indicate that the average density of the soil in the Fra Mauro region is in the range from 1.45 to 1.60 g/cu cm. The soil strength appears to be higher in the vicinity of the site of the Apollo 14 lunar surface experiments package, and trench data suggest that strength increases with depth. Lower-bound estimates of soil cohesion give values of 0.03 to 0.10 kN/sq m, which are lower than values of 0.35 to 0.70 kN/sq m estimated for soils encountered in previous missions. The in situ modulus of elasticity, deduced from the measured seismic-wave velocity, is compatible with that to be expected for a terrestrial silty fine sand in the lunar gravitational field.

Mitchell, J. K.↗

NASA NTRS1980

Three-diemnsional potential flow

Program calculates viscous effects on lift and pressure distribution for arbitrary-dimensional lifting configuration. Geometry package generates input data from reduced amount of user-supplied configuration data. Calculated inviscid and viscous lift and pressure distribution agree well with experimental data for variety of wings and wing/fuselages. Program is in FORTRAN IV for batch execution on CYBER 175.

Halsey, N. D.↗

NASA NTRS1986

A study of the stress wave factor technique for nondestructive evaluation of composite materials

The acousto-ultrasonic method of nondestructive evaluation is an extremely sensitive means of assessing material response. Efforts continue to complete the understanding of this method. In order to achieve the full sensitivity of the technique, extreme care must be taken in its performance. This report provides an update of the efforts to advance the understanding of this method and to increase its application to the nondestructive evaluation of composite materials. Included are descriptions of a novel optical system that is capable of measuring in-plane and out-of-plane displacements, an IBM PC-based data acquisition system, an extensive data analysis software package, the azimuthal variation of acousto-ultrasonic behavior in graphite/epoxy laminates, and preliminary examination of processing variation in graphite-aluminum tubes.

Sarrafzadeh-Khoee, A.↗

NASA NTRS1985

Prospects for astrometry with the Hubble Space Telescope

The Hubble Space Telescope (HST), a large optical telescope having an aperture of 2.4 meters and a length of 8.8 meters, is being developed by NASA. This telescope will be placed into earth orbit by the Space Shuttle. Astrometric observations with the HST are made using a Fine Guidance Sensor which is capable of measuring the position of one object relative to another with an accuracy of + or - 0.002 arcseconds. The astrometric user of HST will be provided with an Astrometric Data Reduction Software package. The variety of astrometric problems to be investigated with HST is discussed.

Jefferys, W. H.↗

NASA NTRS1987

Buckling Analysis of Rectangular Plates With Holes

BUCKO is computer program developed to predict buckling of rectangular compression-loaded orthotropic plate with centrally located cutout. Plate assumed balanced, symmetric laminate of uniform thickness. Cutout shape elliptical, circular, rectangular, or square. Package includes sample data demonstrating essence of program and ease of use. Written in FORTRAN V.

Nemeth, M. P.↗

NASA NTRS1987

Small-Signal ac Analysis

Program simulates power circuits and systems. Small Signal A.C. Analysis program (SSAC) valuable tool for design and analysis of electrical-power-system circuits. By combining "black box" power-system components operating in specified manner, user characterizes system modeled. Menu-driven program proved simple and cost effective in development and modification of arbitrary power-system configurations. Package includes sample data from Dynamic Explorer satellite family. Results compared favorable to calculations from such general circuit-analysis programs as SPICE. Written in FORTRAN 77.

Jagielski, James M.↗

NASA NTRS1991

Global Change Encyclopedia - A project for the international space year

'Global Change Encyclopedia' is a project for the International Space Year in 1992. The project will produce a comprehensive set of satellite and other global data with relevance to studies of global change and of the earth as a system. These data will be packaged on CD-ROMs, accompanied by appropriate software for access, display and manipulation. On behalf of the Canadian Space Agency, the project is being carried out by the Canada Centre for Remote Sensing, with the U.S. National Oceanic and Atmospheric Administration and the U.S. National Aeronautics and Space Administration as major contributors. This paper highlights the background leading to the project, the concept and principal characteristics of the Encyclopedia itself, and the current status and plans.

Cihlar, J.↗