Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DIGESTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Role of Amine Structure on Hydrogen Sulfide Capture from Dilute Gas Streams Using Solid Adsorbents

The hydrogen sulfide composition in biogas ranges from 0 to 5% depending on the feed source to the biogas digester. To meet renewable natural gas specifications of 0–4 ppm of H 2 S content, technologies that remove H 2 S from raw biogas feeds are needed. This contribution assesses three adsorbents with similar textural and physical properties but with different amines grafted to the surface. Specifically, materials containing primary, secondary, and tertiary amines at the end of a propyl surface linker grafted on a silica support are explored. H 2 S adsorption isotherms and cyclic studies are presented for these materials, and it is shown that secondary amines have the best amine efficiency while tertiary amines are the most stable for H 2 S capture, of the materials studied. The results suggest the consideration of secondary and tertiary amines for the design of amine adsorbents suitable for H 2 S removal in dilute gas streams over multiple cycles.

09 BIOMASS FUELS↗
DOE OSTI2020

Recycling of Nutrients from Dairy Wastewater by Extremophilic Microalgae with High Ammonia Tolerance

This study explored the possibility of incorporating extremophilic algal cultivation into dairy wastewater treatment by characterizing a unique algal strain. Results showed that extremophilic microalgae Chlorella vulgaris CA1 newly isolated from dairy wastewater tolerated a high level of ammonia nitrogen (2.7 g/L), which was over 20 times the ammonia nitrogen that regular Chlorella sp. could tolerate. The isolate was mixotrophically cultured in dairy effluent treated by anaerobic digestion (AD) for recycling nutrients and polishing the wastewater. The highest biomass content of 13.3 g/L and protein content of 43.4% were achieved in the culture in AD effluent. Up to 96% of the total nitrogen and 79% of the total phosphorus were removed from the dairy AD effluent. The ability of the algae to tolerate a high level of ammonia nitrogen suggests the potential for direct nutrient recycling from dairy wastewater while producing algal biomass and high value bioproducts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Load-Shifting Strategies for Cost-Effective Emission Reductions at Wastewater Facilities

Significant hourly variation in the carbon intensity of electricity supplied to wastewater facilities introduces an opportunity to lower emissions by shifting the timing of their energy demand. This shift could be accomplished by storing wastewater, biogas from sludge digestion, or electricity from on-site biogas generation. However, the life cycle emissions and cost implications of these options are not clear. Here, we present a multiobjective optimization framework for comparing cost- and emission-minimizing load-shifting strategies at a California case study facility with a relatively low carbon intensity grid and high spread in peak and off-peak electricity prices. We evaluate cost and emission trade-offs from the optimal flexible operation of both existing infrastructure and optimally sized energy flexibility upgrades. We estimate energy-related emission reductions of up to 9.0% with flexible operation of existing infrastructure and up to 16.8% with optimally sized storage upgrades. Only a fraction of these potential savings are realized under actual industrial energy tariffs and the EPA’s recommended social cost of carbon. Energy flexibility may hold promise as a short-term emission-saving solution for the wastewater sector, but the extent of savings is heavily dependent on the cost of carbon, electricity tariffs, and emission intensity of the regional electricity grid.

climate↗
DOE OSTI2017

Bioenergy Potential from Food Waste in California

This paper presents the first detailed analysis of monthly food waste generation in California at a county level, and its potential contribution to the state's energy production. Scenarios that rely on excess capacity at existing anaerobic digester (AD) and solid biomass combustion facilities, and alternatives that allow for new facility construction, are developed and modeled. Potential monthly electricity generation from the conversion of gross food waste using a combination of AD and combustion varies from 420 to 700 MW, averaging 530 MW. At least 66% of gross high moisture solids and 23% of gross low moisture solids can be treated using existing county infrastructure, and this fraction increases to 99% of high moisture solids and 55% of low moisture solids if waste can be shipped anywhere within the state. Biogas flaring practices at AD facilities can reduce potential energy production by 10 to 40%.

09 BIOMASS FUELS↗
DOE OSTI2019

Integrated Two-Stage Alkaline–Oxidative Pretreatment of Hybrid Poplar. Part 2: Impact of Cu-Catalyzed Alkaline Hydrogen Peroxide Pretreatment Conditions on Process Performance and Economics

Two-stage alkaline/copper 2,2'-bipyridine-catalyzed alkaline hydrogen peroxide (Cu-AHP) pretreatment is an effective strategy for improving the enzymatic digestibility of hybrid poplar. To reduce the chemical inputs and processing costs associated with this process, we investigated the effect of increasing the temperature for both the alkaline pre-extraction and the Cu-AHP pretreatment stages. The results indicate that increasing the alkaline pre-extraction and the Cu-AHP pretreatment temperatures from 30 to 120 and 80 °C, respectively, allowed us to reduce both the pretreatment time of the Cu-AHP stage and the chemical loadings. Incubating alkaline pre-extracted hybrid poplar for 12 h with 10% NaOH (w/w biomass), 8% hydrogen peroxide (w/w biomass), and a Cu 2+ and 2,2'-bipyridine (bpy) concentration of 1 mM yielded monomeric sugar yields of approximately 77% glucose and 66% xylose (based on the initial sugar composition) following enzymatic hydrolysis. Technoeconomic analysis (TEA) indicates that these changes to the two-stage alkaline/Cu-AHP pretreatment process could potentially reduce the minimum fuel selling price (MFSP) by more than $\$1.00$ per gallon of biofuel compared to the reference case where both stages were conducted at 30 °C with higher chemical inputs.

09 BIOMASS FUELS↗
DOE OSTI2020

Nanomaterial Synthesis Insights from Machine Learning of Scientific Articles by Extracting, Structuring, and Visualizing Knowledge

Nanomaterials of varying compositions and morphologies are of interest for many applications from catalysis to optics, but the synthesis of nanomaterials and their scale-up are most often time-consuming and Edisonian processes. Information gleaned from the scientific literature can help inform and accelerate nanomaterials development, but again, searching the literature and digesting the information are time-consuming manual processes for researchers. To help address these challenges, here we developed scientific article-processing tools that extract and structure information from the text and figures of nanomaterials articles, thereby enabling the creation of a personalized knowledgebase for nanomaterials synthesis that can be mined to help inform further nanomaterials development. Starting with a corpus of ~35k nanomaterials-related articles, we developed models to classify articles according to the nanomaterial composition and morphology, extract synthesis protocols from within the articles’ text, and extract, normalize, and categorize chemical terms within synthesis protocols. We demonstrate the efficiency of the proposed pipeline on an expert-labeled set of nanomaterials synthesis articles, achieving 100% accuracy on composition prediction, 95% accuracy on morphology prediction, 0.99 AUC on protocol identification, and up to a 0.87 F1-score on chemical entity recognition. In addition to processing articles’ text, microscopy images of nanomaterials within the articles are also automatically identified and analyzed to determine the nanomaterials’ morphologies and size distributions. To enable users to easily explore the database, we developed a complementary browser-based visualization tool that provides flexibility in comparing across subsets of articles of interest. We use these tools and information to identify trends in nanomaterials synthesis, such as the correlation of certain reagents with various nanomaterial morphologies, which is useful in guiding hypotheses and reducing the potential parameter space during experimental design.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Constructing a Tandem Mass Spectral Library for Forensic Ricin Identification

Ricin, a protein found in castor seeds, is a lethal toxin that is designated as a category 2 select agent. Because castor seeds are easy to obtain and the toxin can be easily extracted, cases of attempted ricin poisoning are relatively common. A shotgun proteomics method for ricin identification has recently been developed (manuscript in preparation), in which ricin peptides are identified by liquid chromatography-tandem mass spectrometry (LC-MS/MS) followed by proteomics database search, and peptide-spectrum matches are verified and compared to standard spectra by a human expert. To make this process more reproducible, objective, and high-throughput, we have created a ricin spectral library for peptide identification to supplement the human review step. To construct these spectral libraries, two pure ricin samples (from a proposed standard reference material) and crude castor seed extracts were digested with trypsin and analyzed using a standard shotgun LC-MS/MS protocol. Spectral libraries were created from the filtered search results from four database search tools. The library was then used in a search using SpectraST on samples from castor seeds. Analysis showed that the spectral library search resulted in more peptides identified from crude castor seed samples compared to MS-GF+ and Sequest plus Percolator. These results suggest that computational comparison of putative ricin peptide spectra to library spectra can be an effective method of confirming the presence of ricin, and that spectral library search may be suitable to augment the more manual and subjective aspects of the currently recommended human expert review.

Spectral Library, Ricin, forensic, proteomic↗
DOE OSTI2016

Toward Metal–Organic Framework-Based Solar Cells: Enhancing Directional Exciton Transport by Collapsing Three-Dimensional Film Structures

Owing to their ability to act as light-harvesting scaffolds, porphyrin-containing metal-organic frameworks (MOFs) are in the forefront of research on the application of highly ordered molecular materials to problems in solar-energy conversion. In this work, solvent-assisted linker exchange (SALE) is performed on a pillared paddlewheel porphyrin containing MOF thin film to collapse a 3D framework to a 2D framework. The change in dimensionality of the framework is confirmed by a decrease in the film thickness, the magnitude of which is in agreement with crystallographic parameters for related bulk materials. Furthermore, NMR spectroscopy performed on the digested sample suggests a similar change in geometry is achieved in bulk MOF samples. The decreased distance between the porphyrin chromophores in the 2D MOF film compared to the 3D film results in enhanced energy transfer through the film. The extent of energy transport was probed by assembling MOF thin film where the outermost layers are palladium porphyrin (P2) units, which act as energy traps and fluorescence quenchers. Steady-state emission spectroscopy together with time-resolved emission spectroscopy indicates that excitons can travel through about 9-11 layers (porphyrin layers) in 2D films, whereas in 3D films energy transfer occurs through no more than about 6-8 layers. The results are difficult to understand if only changes in MOF interlayer spacing are considered but become much more understandable if dipole-dipole coupling distances are considered.

Goswami, Subhadip↗
DOE OSTI2017

Multifunctional Cellulolytic Enzymes Outperform Processive Fungal Cellulases for Coproduction of Nanocellulose and Biofuels

Producing fuels, chemicals, and materials from renewable resources to meet societal demands remains an important step in the transition to a sustainable, clean energy economy. The use of cellulolytic enzymes for the production of nanocellulose enables the coproduction of sugars for biofuels production in a format that is largely compatible with the process design employed by modern lignocellulosic (second generation) biorefineries. However, yields of enzymatically produced nanocellulose are typically much lower than those achieved by mineral acid production methods. In this study, we compare the capacity for coproduction of nanocellulose and fermentable sugars using two vastly different cellulase systems: the classical 'free enzyme' system of the saprophytic fungus, Trichoderma reesei (T. reesei) and the complexed, multifunctional enzymes produced by the hot springs resident, Caldicellulosiruptor bescii (C. bescii). Here, we demonstrate by comparative digestions that the C. bescii system outperforms the fungal enzyme system in terms of total cellulose conversion, sugar production, and nanocellulose production. In addition, we show by multimodal imaging and dynamic light scattering that the nanocellulose produced by the C. bescii cellulase system is substantially more uniform than that produced by the T. reesei system. These disparities in the yields and characteristics of the nanocellulose produced by these disparate systems can be attributed to the dramatic differences in the mechanisms of action of the dominant enzymes in each system.

09 BIOMASS FUELS↗
DOE OSTI2021

Effective Biomass Fractionation through Oxygen-Enhanced Alkaline–Oxidative Pretreatment

The high recalcitrance of plant cell walls is an obstacle for effective chemical or biological conversion into renewable chemicals and transportation fuels. Here, we investigated the utilization of both oxygen (O 2 ) and hydrogen peroxide (H 2 O 2 ) as co-oxidants during alkaline-oxidative pretreatment to improve biomass fractionation and increase enzymatic digestibility. The oxidative pretreatment of hybrid poplar was studied over a variety of conditions. Employing O 2 in addition to H 2 O 2 as a co-oxidant during the two-stage alkaline pre-extraction/copper-catalyzed alkaline hydrogen peroxide (Cu-AHP) pretreatment process resulted in a substantial improvement in delignification relative to using H 2 O 2 alone during the second-stage Cu-AHP pretreatment, leading to high overall sugar yields even at H 2 O 2 loadings as low as 2% (w/w of original biomass). The presence of H 2 O 2 , however, was both critical and synergistic. Performing analogous reactions in the absence of H 2 O 2 resulted in approximately 25% less delignification and a 30% decrease in sugar yields. Here, the lignin isolated from this dual oxidant second stage had high aliphatic hydroxyl group content and reactivity to isocyanate, indicating that it is a promising substrate for the production of polyurethanes. To test the suitability of the isolated lignin as a source of aromatic monomers, the lignin was subjected to a sequential Bobbitt’s salt oxidation followed by formic-acid catalyzed depolymerization process. Monomer yields of approximately 17% (w/w) were obtained, and the difference in yields was not significant between lignin isolated from our Cu-AHP process with and without O 2 as a co-oxidant. Thus, the addition of O 2 did not lead to significant lignin crosslinking, a result consistent with the two-dimensional heteronuclear single-quantum coherence (2D HSQC) NMR spectra of the isolated lignin.

09 BIOMASS FUELS↗
DOE OSTI2021

Transformation Kinetics of Phosphorus and Nitrogen in Iron-Rich Sewage Sludges during Hydrothermal Treatment and Recovery of Nutrients from Process Water

Hydrothermal treatment (HT) is an emerging technique for sustainable sewage sludge management and resource recovery. Many sludges are rich in iron (Fe) due to the common addition of Fe salts in water resource recovery facilities. To develop guidance for reaction conditions targeting nutrient recovery, this study systematically investigated the influence of HT temperature, treatment time, and sludge source on the dynamic speciation evolution of phosphorus (P) and nitrogen (N) during HT of Fe-rich sewage sludge. Complementary chemical extraction and X-ray spectroscopy analyses were conducted to characterize the treatment products. For the sludge mixture (a blend of primary and waste activated sludges), P speciation did not change significantly within 4.5 h at 125 °C HT, while soluble and labile P was converted into insoluble P over time at 175 and 225 °C HT. Strengite (FePO 4 · 2 H 2 O) preferentially formed in the hydrochars with increasing treatment temperature and/or time, whereas 125 °C HT within 1.5 h favored the formation of vivianite (Fe 3 (PO 4 ) 2 ·8H 2 O). Organic P was completely decomposed into orthophosphate when the HT temperature reached up to 175 °C. Pyrrole-N was enriched in the hydrochars. Similar reaction pathways were observed during HT of anaerobically digested sludge, though some minor differences in Fe-associated P and organic P were observed. Meanwhile, HT of the two sludges released orthophosphate and ammonia into the process waters at 175 and 225 °C, which can be recovered by a sequential process involving struvite (MgNH 4 PO 4 ·6H 2 O) precipitation and air stripping. This study provides new insights into the transformation of P and N during HT of Fe-rich sludges as well as a modular design for maximum P and N recovery from the treatment products.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Evolution of the Cellulose Microfibril through Gamma-Valerolactone-Assisted Co-Solvent and Enzymatic Hydrolysis

Biomass recalcitrance during deconstruction remains a key bottleneck to affordable biomass processing technologies. A clear connection between the cell wall structure and biomass deconstruction is necessary to understand how lignocellulosic material is broken down to valuable monomeric components. Here, we monitor changes in the cellulose microfibril domains of poplar, sorghum, and switchgrass throughout gamma-valerolactone (GVL)–water co-solvent pretreatment and enzymatic hydrolysis using solid-state 13 C cross-polarization magic angle spinning nuclear magnetic resonance spectroscopy (CP/MAS 13 C-NMR) and wide-angle X-ray scattering (WAXS). Spectral fitting of NMR peaks corresponding to different cellulose microenvironments at the C 4 carbon center suggests that a mildly acidic GVL–water co-solvent pretreatment of poplar leads to nearly full removal of xylan–cellulose linkages, which primes the cellulose for enzymatic attack. The spectral fitting also suggests that the pretreatment causes significant depletion of the inaccessible fibril surface domains with an increase in more thermally stable crystalline resonances (I β ). WAXS confirmed a decrease in the lattice spacing between (200) crystalline planes with increasing co-solvent pretreatment severity. These results are interpreted as an opening of bound microfibril surfaces previously inaccessible to the co-solvent system, which leaves behind a more thermally stable, crystalline domain that is potentially prone to relaxation and recrystallization. Full conversion of residual GVL-pretreated biomass was achieved after the GVL co-solvent pretreatment at 140 °C using a commercial enzyme cocktail, CTec2, which contains different cellulases and other enzymes. Spectral fitting of enzymatically hydrolyzed samples by a single engineered cellulase, CelR, suggests that the residual cellulose recalcitrance is mainly due to the inability of CelR to digest the I β crystalline domain present in pretreated samples. This work helps to provide new information regarding the structure of the cell wall and recalcitrance throughout GVL–water mild acidolysis and CelR enzymatic biomass deconstruction by tracking the evolution of structural domains within the cellulose microfibril. This work further directs recommendations for improving the conversion and sugar yields in future studies. Finally, our findings inform inquiry into larger questions of cellulose recalcitrance through GVL pretreatment and CelR enzymatic hydrolysis and give insight into subsequent required steps for full cellulose conversion with attention to the most recalcitrant cellulose structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Storage-Induced Collapse of Lignin Macromolecular Structure and Its Impacts on the Biorefinery

Lignin plays a vital role in the economics of biorefineries, serving as a source of process energy and a feedstock for sustainable fuels and chemical production. While understanding lignin’s chemical composition is crucial, emerging evidence suggests that a more comprehensive understanding of its macromolecular structure is critical to explaining its complex behavior in the biorefinery. This study investigated the partial collapse of the lignin network in corn stover feedstock after harvest and storage as a result of the microbial digestion of hemicellulose. Fluorescence microscopy was used to detect the collapse of lignin in terms of lignin’s inter-molecular interaction and the re-orientation of lignin’s chromophores, by the changes in lignin’s fluorescence lifetime, anisotropy, and the number of effective emitters. With minimal sample perturbation, our in-situ microscopic results revealed lignin's coil-globule transition phenomena, which was only previously predicted by molecular dynamics modeling extracted lignin in solvent. This collapse of lignin macromolecular structure was confirmed by results from NMR, IR, Raman, and powder X-ray diffraction. We also investigated the impact of this storage-induced collapse on the downstream biorefinery processes. Our study revealed that the two major approaches for lignin valorization in the lignin-first biorefinery model, namely monomer extraction and milled wood lignin extraction, were negatively impacted by the lignin collapse. As changes during storage are a source of feedstock variability, our study highlights the importance of understanding the effect of feedstock handling on biorefinery operations and economics.

09 BIOMASS FUELS↗
DOE OSTI2025

Identification and Mitigation of Inhibitory Substances Contained in High-Salinity Crude Glycerol Generated from Biodiesel Production for Polyhydroxyalkanoate Synthesis by Haloferax mediterranei

High-salinity crude glycerol generated from biodiesel production poses significant challenges to microbial valorization due to inhibitory ingredients that severely limit microbial growth. This study identified and mitigated inhibitory substances contained in high-salinity glycerol sludge to enable its conversion to polyhydroxyalkanoates (PHAs) by the extreme halophilic archaeon Haloferax mediterranei. The long-chain fatty acids (LCFAs) were consistently identified as the primary inhibitors by liquid chromatography−mass spectrometry, Fourier transform infrared spectroscopy, and ultraviolet−visible spectroscopy. Acid precipitation at pH 2 efficiently removed these LCFAs, substantially reducing the required feedstock dilution from 23 to 3 times, improving PHA titer by 40%. Furthermore, this dilution reduction also increased the feedstock salinity utilization, achieving a 46% reduction in external salt supplementation for H. mediterranei growth. In contrast, overliming and arrested anaerobic digestion were confirmed to be ineffective in inhibitor removal. This study provides deep insights into inhibitor chemistry and presents acid precipitation as an effective pretreatment strategy for waste valorization of highsalinity crude glycerol.

LC-MS↗
DOE OSTI2017

Alkaline Peroxide Delignification of Corn Stover

Selective biomass fractionation into carbohydrates and lignin is a key challenge in the conversion of lignocellulosic biomass to fuels and chemicals. In the present study, alkaline hydrogen peroxide (AHP) pretreatment was investigated to fractionate lignin from polysaccharides in corn stover (CS), with a particular emphasis on the fate of the lignin for subsequent valorization. The influence of peroxide loading on delignification during AHP pretreatment was examined over the range of 30-500 mg H2O2/g dry CS at 50 degrees C for 3 h. Mass balances were conducted on the solid and liquid fractions generated after pretreatment for each of the three primary components, lignin, hemicellulose, and cellulose. AHP pretreatment at 250 mg H2O2/g dry CS resulted in the pretreated solids with more than 80% delignification consequently enriching the carbohydrate fraction to >90%. Two-dimensional nuclear magnetic resonance (2D-NMR) spectroscopy of the AHP pretreated residue shows that, under high peroxide loadings (>250 mg H2O2/g dry CS), most of the side chain structures were oxidized and the aryl-ether bonds in lignin were partially cleaved, resulting in significant delignification of the pretreated residues. Gel permeation chromatography (GPC) analysis shows that AHP pretreatment effectively depolymerizes CS lignin into low molecular weight (LMW) lignin fragments in the aqueous fraction. Imaging of AHP pretreated residues shows a more granular texture and a clear lamellar pattern in secondary walls, indicative of layers of varying lignin removal or relocalization. Enzymatic hydrolysis of this pretreated residue at 20 mg/g of glucan resulted in 90% and 80% yields of glucose and xylose, respectively, after 120 h. Overall, AHP pretreatment is able to selectively remove more than 80% of the lignin from biomass in a form that has potential for downstream valorization processes and enriches the solid pulp into a highly digestible material.

09 BIOMASS FUELS↗
DOE OSTI2018

Understanding Lignin Fractionation and Characterization from Engineered Switchgrass Treated by an Aqueous Ionic Liquid

Aqueous ionic liquids (ILs) have received increasing interest because of their high efficacy in fractionating and pretreating lignocellulosic biomass while at the same time mitigating several challenges associated with IL pretreatment such as IL viscosity, gel formation during pretreatment, and the energy consumption and costs associated with IL recycling. This paper investigated the fate of lignin, its structural and compositional changes, and the impact of lignin modification on the deconstruction of cell wall compounds during aqueous IL (10% w/w cholinium lysinate) pretreatment of wild-type and engineered switchgrass. The 4CL genotype resulting from silencing of 4-coumarate:coenzyme A ligase gene (Pv4CL1) had a lower lignin content, relatively higher amount of hydroxycinnamates, and higher S/G ratio and appeared to be less recalcitrant to IL pretreatment likely due to the lower degree of lignin branching and more readily lignin solubilization. The results further demonstrated over 80% of lignin dissolution from switchgrass into the liquid fraction under mild conditions while the remaining solids were highly digestible by cellulases. The soluble lignin underwent partial depolymerization to a molecular weight around 500–1000 Da. 1 H– 13 C HSQC NMR results demonstrated that the variations in lignin compositions led to different modes of lignin dissolution and depolymerization during pretreatment of engineered switchgrass. Finally, these results provide insights into the impact of lignin manipulation on biomass fractionation and lignin depolymerization and lead to possible ways toward developing a more selective and efficient lignin valorization process based on aqueous IL pretreatment technology.

59 BASIC BIOLOGICAL SCIENCES↗