Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Control”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Manual control theory applied to air traffic controller-pilot cooperation

Reduced runway separation standards are among the means which have been proposed for increasing airport capacity. The probability of a blunder will dominate the calculation of safe separation standards. Then the determinant of safe system performance will be the system reaction time comprised of the air traffic controller's detection, decision and communication delays, and the response times of the pilot and aircraft in executing a collision avoidance manuever. Estimates of these times, based on existing data, show that the delays ascribable to the human portions of the man-machine system are comparatively unimportant. New developments in radar, computers, and data links will be required to provide any substantial improvement of the existing system, and the goal of 2500 ft of separation may not be achievable.

Graham, D.↗
NASA NTRS1973

Attitude control of a large flexible spacecraft using three-axis mass expulsion control.

A study of the elastic effects of large area solar arrays on attitude control of a spacecraft was conducted. It is demonstrated for sufficiently low structural frequencies that excitation of certain modes can induce instability in the pitch axis. Stiffening the arrays can eliminate the instability. However, a severe weight penalty is associated with such modification. A more efficient means of minimizing the structural interaction effects is to change the shape of the array. For stable configurations, another problem may be encountered. This is the imposition of high rates on the spacecraft bus by oscillation of the solar arrays. Since low rates are required to obtain accurate science experiment results, it is imperative that the high rate problem be resolved. This also is possible by changing the solar array configuration.

Marsh, E. L.↗
NASA NTRS1973

2-SPEED, a single-gimbal control moment gyro attitude control system.

In 2-SPEED (Two Scissored Pair Ensemble, Explicit Distribution) four single-gimbal control moment gyros (SGCMGs) configured into two scissored pairs are combined with an explicit distribution of angular momentum between pairs to produce a system relatively insensitive to the singularity problems which have plagued other SGCMG concepts. In this system, the singularity surfaces in momentum space degenerate to discrete curves. Further, the system permits a smooth passage through these remaining singularities with, at worst, a temporary delay while momentum redistribution takes place. Finally, CMG-out operation is possible within the full volume of the reduced momentum envelope.

Crenshaw, J. W.↗
NASA NTRS1973

Effects of reaction control system jet simulation on the stability and control characteristics of a 0.015-scale space shuttle orbiter model in the Ames Research Center 3.5-foot hypersonic wind tunnel

An experimental investigation was performed in the Ames Research Center 3.5-Foot Hypersonic Wind Tunnel to obtain detailed effects which interactions between the RCS jet flow field and the local orbiter flow field have on orbiter hypersonic stability and control characteristics. Six-component force data were obtained through an angle-of-attack range of 15 to 35 deg with 0 deg angle of sideslip. The test was conducted with yaw, pitch and roll jet simulation at a free-stream Mach number of 10.3. These data simulate two SSV reentry flight conditions at Mach numbers of 28.3 and 10.3. Fuselage base pressures and pressures on the nonmetric RCS pods were obtained in addition to the basic force measurements. Model 42-0 was used for these tests.

Dziubala, T. J.↗
NASA NTRS1974

Effects of reaction control system jet simulation on the stability and control characteristics of a 0.015 scale space shuttle orbiter model tested in the Langley Research Center unitary plan wind tunnel

An experimental investigation was performed in the Langley Research Center Unitary Plan Wind Tunnel (Test 0A70) to obtain the detailed effects that RCS jet flow interactions with local orbiter flow field have on supersonic stability and control characteristics of the space shuttle orbiter. Six-component force data were obtained through an angle-of-attack range from 15 to 35 degrees at angles of sideslip of 0, +5, and -5 degrees. The test was conducted with yaw jet simulation at free-stream Mach numbers of 2.5 and 4.6, simulating SSV re-entry flight conditions at these Mach numbers. In addition to the basic force measurements, fuselage base pressures and pressures on the non-metric RCS pods were obtained.

Daileda, J. J.↗
NASA NTRS1974

Study of design and control of remote manipulators. Modeling manipulator arms with distributed flexibility for design and control

The interactions of control system and distributed flexible structural dynamics is explored for mechanical arms. A modeling process using 4 x 4 transfer matrices is described which permits the closed loop response of many current arm configurations to be evaluated. Root locus, frequency response, modal shapes, and time impulse response have all been obtained from the digital computer implementation of this model, which is oriented to arm design and allows for easy variation of the arm configuration through data cards. The model corresponds with experimentally observed natural frequencies with an average error of less than 5% in the first three flexible modes in the seven cases considered. The model was used to explore the limits imposed by structural flexibility on a nondimensionalized two link arm with one and two joints for planar motion.

Book, W. J.↗
NASA NTRS1974

Research study on stabilization and control modern sampled-data control theory

The methods of continuous and discrete describing function analysis were applied to predicting the existence of self-sustained oscillations in the single-axis model of the large space telescope system with nonlinear control moment gyroscope friction characteristics. It is shown that the stability equations may be solved by a numerical-iterative technique using the describing function analysis, instead of the usual graphical methods. The numerical method is found to be effective in leading to a convergent solution rapidly, with an appropriate guess of the initial condition.

Kuo, B. C.↗
NASA NTRS1975

Research study on stabilization and control: Modern sampled-data control theory. Design of the large space telescope system

Conditions of self-sustained oscillations in a two-axis model of the nonlinear LST system are studied. The describing function of the CMG frictional nonlinearity of the LST system is used for the analysis, as well as continuous-data and discrete-data models of the simplified LST control system. A numerical-iterative method is described for the analysis of the two-axis system. Approximation methods and the direct plotting of the stability equation are implemented in the study. It is shown that although the dynamics of the two axes are identical, the amplitudes of self-sustained oscillations in the two axes may in principle be different. Analysis shows that the LST systems are of equal amplitudes but with 180-degree phase shift.

Kuo, B. C.↗
NASA NTRS1975

Research study on stabilization and control. Modern sampled-data control theory: Stability analysis of the low cost large space telescope system

The pointing stability of the low-cost large space telescope (LST) system was investigated. The low-cost LST is characterized by the use of reaction wheels for the generation of control torques. Because of the critical requirement on the pointing accuracy of the LST, the nonlinear frictional characteristics of the bearings of the reaction wheels were studied which can cause limit cycles in a closed-loop system. Another possible source of pointing error in the LST is due to the effect of quantization and sensor noise. Since the LST is a digital system, digital to analog and analog to digital converters and sensors for positional and rate feedbacks were used. Sensor noise and amplitude quantization causes pointing error in the LST and, in addition, quantization is a nonlinear phenomenon which can cause self-sustained oscillations in the closed-loop system. The dynamic modeling of the single-axis LST is described, and several methods of evaluating the attitude error of the digital LST due to quantization and noise inputs are given.

Kuo, B. C.↗
NASA NTRS1975

Apollo experience report: Guidance and control systems. Lunar module stabilization and control system

A brief functional description of the Apollo lunar module stabilization and control subsystem is presented. Subsystem requirements definition, design, development, test results, and flight experiences are discussed. Detailed discussions are presented of problems encountered and the resulting corrective actions taken during the course of assembly-level testing, integrated vehicle checkout and test, and mission operations. Although the main experiences described are problem oriented, the subsystem has performed satisfactorily in flight.

Shelton, D. H.↗
NASA NTRS1976

Wind-tunnel investigation of control-surface characteristics. 5: The use of a beveled trailing edge to reduce the hinge moment of a control surface

Wind tunnel tests have been made to investigate the possibility of reducing the hinge moments of a control surface by beveling the trailing edge. The tests were made with a 9 percent thick airfoil having a 30 percent chord plain flap. A faired beveled shape, 5 percent of the airfoil chord in width and having a thickness of 21/2 percent of the airfoil chord, was found to give approximately 50 percent reduction in the hinge moment caused by a given deflection of the flap and 80 percent reduction in the hinge moment due to the angle of attack of this airfoil for a wide range of angles. Elliptical trailing edge shapes were also tried but were found to be somewhat less effective.

Jones, R. T.↗
NASA NTRS1975

The stochastic control of the F-8C aircraft using the multiple model adaptive control /MMAC/ method

The purpose of this paper is to summarize results obtained for the adaptive control of the F-8C aircraft using the so-called MMAC method. The discussion includes the selection of the performance criteria for both the lateral and the longitudinal dynamics, the design of the Kalman filters for different flight conditions, the 'identification' aspects of the design using hypothesis testing ideas, and the performance of the closed loop adaptive system.

Athans, M.↗
NASA NTRS1977

Effects of control inputs on the estimation of stability and control parameters of a light airplane

The maximum likelihood parameter estimation technique was used to determine the values of stability and control derivatives from flight test data for a low-wing, single-engine, light airplane. Several input forms were used during the tests to investigate the consistency of parameter estimates as it relates to inputs. These consistencies were compared by using the ensemble variance and estimated Cramer-Rao lower bound. In addition, the relationship between inputs and parameter correlations was investigated. Results from the stabilator inputs are inconclusive but the sequence of rudder input followed by aileron input or aileron followed by rudder gave more consistent estimates than did rudder or ailerons individually. Also, square-wave inputs appeared to provide slightly improved consistency in the parameter estimates when compared to sine-wave inputs.

Cannaday, R. L.↗
NASA NTRS1977

The stochastic control of the F-8C aircraft using a multiple model adaptive control /MMAC/ method. I - Equilibrium flight

The purpose of this paper is to summarize some results obtained for the adaptive control of the F-8C aircraft using the so-called MMAC method. The discussion includes the selection of the performance criteria for both the lateral and the longitudinal dynamics, the design of the Kalman filters for different flight conditions, the 'identification' aspects of the design using hypothesis testing ideas, and the performance of the closed-loop adaptive system.

Athans, M.↗