Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Concentrated Solar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

A mechanism for inducing climatic variations through the stratosphere - Screening of cosmic rays by solar and terrestrial magnetic fields

The ability of heliomagnetic and geomagnetic fields to bring about climatic variations of long period is examined theoretically. A chemical relationship between low-energy cosmic rays and ozone balance in the stratosphere is sought as a crucial clue to historical changes in earth climate. A perturbation analysis is developed to arrive at zone depletion and reduction of stratospheric solar heating resulting from increased NOx concentration; temperature feedback and opacity feedback are allowed for. Modulation of galactic cosmic-radiation fluxes and ozone destruction in the stratosphere, colder surface temperatures associated with reduced magnetic shielding, and redistribution with height of total ozone decrease are explored.

Chamberlain, J. W.↗
NASA NTRS1980

The JPL parabolic dish project

The parabolic dish solar collector is a highly versatile concentrating collector system that can produce heat for many thermal processes and electricity by coupling the collector to a suitable heat engine. This paper discusses a project for the development of these collector systems and summarizes contracts with industry for developing the dish subsystems which include concentrator, receiver, and heat engine. An early market for dishes is the dispersed small community market which depends heavily on oil to operate diesel or steam turbine plants in order to generate electricity. The present contracts with industry for conducting engineering experiments using the developed dish hardware to demonstrate the technology in these early opportunity markets is also discussed.

Truscello, V. C.↗
NASA NTRS1980

Infrared remote sensing of sea surface temperature

The surface temperature TS of the ocean and solid earth can be derived from the radiance data measured in the 3.7 micron transparent region between 2700 and 2500 per cm as well as from the 11 micron water vapor continuum between 960 and 775 per cm. The effects on the accuracy of the recovered values of TS of surface emissivity, reflection of solar radiation and variations in the concentration of water vapor in the atmosphere are different in the two bands. In this paper, the accuracy of the surface temperature derived from each of these two transparent spectral regions is discussed. The possibility of determining the difference between the air temperature at the surface and the true skin surface temperature is also considered.

Chahine, M. T.↗
NASA NTRS1981

Detection of strength limiting defects in cellular glasses by dielectric measurements

The foamed glasses that are being considered for structural support in solar thermal energy system silvered glass concentrator mirrors are assessed for strength-limiting defects by a nondestructive technique which measures the capacitance of well defined regions. The feasibility of locating large defects is demonstrated for the case of one type of cellular mass. Observed capacitance variations are believed to be due to small voids or other irregularities in the material. If the defects are equal to or greater than approximately 20 times the glass matrix pore size, they can be resolved with sufficient accuracy to delineate their spatial extent.

Gammell, P. M.↗
NASA NTRS1982

Variations in ion and neutral composition at Venus - Evidence of solar control of the formation of the predawn bulges in H/+/ and He1

A comparison of ion and neutral composition measurements at Venus for periods of greatly different solar activity provides qualitative evidence of solar control of the day-to-night transport of light ion and neutral species. Concentrations of H(+) and He in the predawn bulge near solar maximum in November, 1979, exhibit a depletion signature correlated with a pronounced modulation in the solar F10.7 and EUV fluxes. This perturbation, not observed in the predawn region during an earlier period of relative quiet solar conditions, is interpreted as resulting from pronounced changes in solar heating and photoionization on the dayside, which in turn modulate the transport of ions and neutrals into the bulge region.

Taylor, H. A., Jr.↗
NASA NTRS1985

Receiver For Solar Air Turbine

Solar receiver heats air to temperature high enough to drive gas turbine. Receiver has thermal output of about 70 kilowatts. Pointing downward at focal position of solar reflector, proposed receiver accepts intense concentrated sunlight. Although temperatures in receiver may rise to 1,500 degrees F (816 degrees C) or more, calculations show receiver loses less than 10 percent of insolation by convection through aperture. Receiver designed for 30-year life without scheduled maintenance or replacement.

Kofal, A.↗
NASA NTRS1984

Photovoltaic Working Group Report

Results of the photovoltaic subcommittee meeting are summarized. The specific topics addressed include solar cell development and efficiency evaluation, concentrator arrays and array structural technology, and environmental interaction problems.

Chidester, L. G.↗
NASA NTRS1985

Structural defects in crystalline silicon

The basic photovoltaic properties of a given crystalline silicon specimen seem to be governed by density and nature of two to three dimensional lattice defects. These are mainly generated by primary growth conditions as grain boundaries of more or less intrinsic character or second phase precipitates from supersaturated solutions of carbon or oxygen. Considerably high values of both solubility and diffusivity in connection with their abundance in common refractory material systems account for the predominance of the two particular elements. Unsaturated dislocations of different types very often can be seen as a consequence of the existence of more dimensional defects as described initially. The final performance of a solar cell is dependent of the concentration and distribution of recombination active centers in the different regions of this device. Typical representatives are fast diffusing transition metals in form of either single atoms or simple complexes. Their avoidance, annihilation, or removal is of great concern in different fields of electronic materials development.

Sirtl, E.↗
NASA NTRS1985

Measurement of electrical parameters and current components in the bulk of silicon solar cells

A review and illustration of electrical measurements for determination of the bulk parameters in silicon solar cells is given. The presentation concentrates on transient and small signal admittance measurements. These measurements yield accurate and reliable values of the base lifetime and the surface recombination velocity at the back contract without inaccuracies that normally results from electrons and holes in the p/n junction space charge region. This then allows the determination of the recombination current in each region of the cell. As an example, current components in the emitter, low doped base, high doped base and junction space charge region of the back surface field cell are obtained. Such analysis is essential in determining the relative importance of the base and the emitter and, thus, the region that limits the cell efficiency.

Neugroschel, A.↗
NASA NTRS1988

Variations of total ozone in the north polar region as seen by TOMS

Data from the TOMS instrument has been used to follow the course of development of the Antarctic ozone springtime minimum since 1979. Addressed is the question of possible north polar region changes which might be deduced from the nine years of TOMS measurements of total ozone. Total ozone is a much more variable quantity in the Northern Hemisphere than in the Southern Hemisphere. This makes the search for trends more difficult and the interpretation of results more uncertain. The 9-yr time series of TOMS data at high latitudes in the Northern Hemisphere is examined. Because the TOMS measurements have drifted by 3 to 4 percent with respect to closely collocated Dobson measurements, it was chosen in this study to adopt the Dobson normalization and adjust the TOMS measurements accordingly. The difference between the last two years (1986 and 1987) of the TOMS record, and the first two years of the record (1979 and 1980) are shown. The difference in percent is given as a function of latitude and time of year. The Antarctic springtime decrease is clearly seen as well as a smaller change which extends to about 50 degrees south latitude at all seasons. Changes in the Northern Hemisphere are less dramatic and are concentrated near the polar night where solar zenith angles are very large. These data are now being examined in more detail and updated results will be presented at the Workshop.

Stolarski, Richard S.↗
NASA NTRS1990

Helicopter Airborne Laser Positioning System (HALPS)

The theory of operation, configuration, laboratory, and ground test results obtained with a helicopter airborne laser positioning system developed by Princeton University is presented. Unfortunately, due to time constraints, flight data could not be completed for presentation at this time. The system measures the relative position between two aircraft in three dimensions using two orthogonal fan-shaped laser beams sweeping across an array of four detectors. Specifically, the system calculates the relative range, elevation, and azimuth between an observation aircraft and a test helicopter with a high degree of accuracy. The detector array provides a wide field of view in the presence of solar interference due to compound parabolic concentrators and spectral filtering of the detector pulses. The detected pulses and their associated time delays are processed by the electronics and are sent as position errors to the helicopter pilot who repositions the aircraft as part of the closed loop system. Accuracies obtained in the laboratory at a range of 80 ft in the absence of sunlight were + or - 1 deg in elevation; +0.5 to -1.5 deg in azimuth; +0.5 to -1.0 ft in range; while elevation varied from 0 to +28 deg and the azimuth varied from 0 to + or - 45 deg. Accuracies in sunlight were approximately 40 deg (+ or - 20 deg) in direct sunlight.

Eppel, Joseph C.↗
NASA NTRS1990

Tropospheric OH in a three-dimensional chemical tracer model - An assessment based on observations of CH3CCl3

The paper introduces the representation of tropospheric chemistry allowing for calculation of chemical reaction rates within a chemical tracer model (CTM) simulation with the accuracy comparable to that of a detailed chemical model. The global distribution of tropospheric OH is calculated as a function of time, atmospheric composition, temperature, and solar irradiance. The globally integrated OH concentration weighted by frequency of reaction with CH3CCl3 is evaluated, along with the feasibility of using the observed latitudinal distribution of CH3CCl3 as a test for computed concentrations of OH. Seasonal variations of CH3CCl3 are also considered as a potential test for computed concentrations of OH. It is demonstrated that annual cycles of CH3CCl3 are controlled, or strongly influenced, by dynamical processes at latitudes northward of 25 deg South.

Spivakovsky, C. M.↗
NASA NTRS1990

Helicopter Airborne Laser Positioning System (HALPS)

The theory of operation, configuration, laboratory, and ground test results obtained with an HALPS developed by Princeton University is presented. The HALPS measures the relative position between two aircraft in three dimensions using two orthogonal fan-shaped laser beams sweeping across an array of four detectors. Specifically, the HALPS calculates the relative range, elevation, and azimuth between an observation aircraft and a test helicopter with a high degree of accuracy. The detector array provides a wide field of view in the presence of solar interference due to compound parabolic concentrators and spectral filtering of the detector pulses. The detected pulses and their associated time delays are processed by the electronics and are sent as position errors to the helicopter pilot who repositions the aircraft as part of the closed loop system. Accuracies obtained in the laboratory at a range of 80 ft in the absence of sunlight were + or - 1 deg in elevation; +0.5 to -1.5 deg in azimuth; +0.5 to -1.0 ft in range; while elevation varied from 0 to +28 deg and the azimuth varied from 0 to + or - 45 deg. Accuracies in sunlight were approximately 40 deg (+ or - 20 deg) in direct sunlight.

Eppel, Joseph C.↗
NASA NTRS1992

FNAS/solar flare energetics

We have performed an extensive study of solar flare energy buildup and release, concentrating in two aspects: (1) relationship with 3D field topology and measured electric currents; and (2) flare onset characteristics as determined from combined x ray and ultraviolet observations. We extended our previous studies on the characteristic topology of flaring regions, by following the evolution of an active region over three consecutive days. From comparison with flare observations in x rays and h alpha, we found further support for the hypothesis that flares were triggered by taking place at the separators (3D generalization of and x-type neutral point). Furthermore, we found that emerging in flux at a site within the active regions where no (or little) activity was previously observed, caused the appearance of a secondary separator and thereon continuous triggering of activity at such site. Our topology arguments were then applied to a study of sympathetic activity between two regions within an active complex. Here again we found that interacting field structures along separators and separatrices, which act as pathways for recurrent flaring to spread between the regions, could be used to understand how activity spread to potentially explosive sites with the complex. We also finished our study of flare onset characteristics as determined from combined x ray and ultraviolet observations. Using a quasi-static modeling approach, we find that this phase is characterized by a relatively low level of energy release, 10 exp 26-27 erg/s, which is sufficient to produce 'gentle' evaporation, a shift in the location of the transition zone as compared to pre-flare conditions, and an increase in the temperature and density of coronal loops. All these changes have profound implications on the observed signatures of impulsive phase phenomena, which had been neglected in the past. As a follow-up of this investigation, we now plan to apply our results to the interpretation of high-sensitivity spectroscopic and hard x-ray data currently being gathered by the Yohkoh and Compton Gamma Ray Observatory satellites.

Machado, M. E.↗
NASA NTRS1994

The three-dimensional structures of X-ray bright points

Recently, the Convergin Flux Model has been proposed for X-ray bright points and cancelling magnetic features. The aim of this piece of work is to try and model theoretically specific X-ray bright points in the framework of the Converging Flux Model. The observational data used includes a magnetogram showing the normal component of the magnetic field at the photosphere and a high-resolution soft X-ray image from NIXT showing the brightenings in the lower solar corona. By approximating the flux concentrations in the magnetograms with poles of the appropriate sign and sense, the overlying three-dimensional potential field structure is calculated. Deduction of plausible motions of the flux sources are made which produce brightenings of the observed shape due to reconnection between neighbouring flux regions. Also the three-dimensional separatrix and separator structure and the way the magnetic field lines reconnect in three dimensions is deduced.

Parnell, C. E.↗
NASA NTRS1998

Integrated Solar Upper Stage Technical Support

NASA Lewis Research Center is participating in the Integrated Solar Upper Stage (ISUS) program. This program is a ground-based demonstration of an upper stage concept that will be used to generate both solar propulsion and solar power. Solar energy collected by a primary concentrator is directed into the aperture of a secondary concentrator and further concentrated into the aperture of a heat receiver. The energy stored in the receiver-absorber-converter is used to heat hydrogen gas to provide propulsion during the orbital transfer portion of the mission. During the balance of the mission, electric power is generated by thermionic diodes. Several materials issues were addressed as part of the technical support portion of the ISUS program, including: 1) Evaluation of primary concentrator coupons; 2) Evaluation of secondary concentrator coupons; 3) Evaluation of receiver-absorber-converter coupons; 4) Evaluation of in-test witness coupons. Two different types of primary concentrator coupons were evaluated from two different contractors-replicated coupons made from graphite-epoxy composite and coupons made from microsheet glass. Specular reflectivity measurements identified the replicated graphite-epoxy composite coupons as the primary concentrator material of choice. Several different secondary concentrator materials were evaluated, including a variety of silver and rhodium reflectors. The specular reflectivity of these materials was evaluated under vacuum at temperatures up to 800 C. The optical properties of several coupons of rhenium on graphite were evaluated to predict the thermal performance of the receiver-absorber-converter. Finally, during the ground test demonstration, witness coupons placed in strategic locations throughout the thermal vacuum facility were evaluated for contaminants. All testing for the ISUS program was completed successfully in 1997. Investigations related to materials issues have proven helpful in understanding the operation of the test article, leading to a potential ISUS flight test in 2002.

Jaworske, Donald A.↗
NASA NTRS2013

Laser Subdivision of the Genesis Concentrator Target Sample 60000

The Genesis Allocation Committee received a request for ~ 1 square centimeter of the diamond-like-carbon (DLC) concentrator target for the analysis of solar wind nitrogen isotopes. The target consists of a single crystal float zone (FZ) silicon substrate having a thickness on the order of 550 micrometers with a 1.5-3.0 micrometer-thick coating of DLC on the exposed surface. The solar wind is implanted shallowly in the front side DLC. The original target was a circular quadrant with a radius of 3.1 cm; however, the piece did not survive intact when the spacecraft suffered an anomalous landing upon returning to Earth on September 8, 2004. An estimated 75% of the DLC target was recovered in at least 18 fragments. The largest fragment, Genesis sample 60000, has been designated for this allocation and is the first sample to be subdivided using our laser scribing system Laser subdivision has associated risks including thermal diffusion of the implant if heating occurs and unintended breakage during cleavage. A careful detailed study and considerable subdividing practice using non-flight FZ diamond on silicon, DOS, wafers has considerably reduced the risk of unplanned breakage during the cleaving process. In addition, backside scribing reduces the risk of possible thermal excursions affecting the implanted solar wind, implanted shallowly in the front side DLC.

Lauer, Howard V., Jr.↗
NASA NTRS2016

Comet Dust: The Diversity of Primitive Particles and Implications

Comet dust is primitive and shows significant diversity. Our knowledge of the properties of primitive particles has expanded significantly through microscale investigations of cosmic dust samples (IDPs and AMMs) and of comet dust samples (Stardust and Rosetta's COSIMA), as well as through remote sensing (spectroscopy and imaging) via Spitzer and via spacecraft encounters with 103P/Hartley 2 and 67P/Churyumov-Gerasimenko. Microscale investigations show that comet dust and cosmic dust are particles of unequilibrated materials, including aggregates of materials unequilibrated at submicron scales. We call unequilibrated materials "primitive" and we deduce they were incorporated into ice-­‐rich (H2O-, CO2-, and CO-ice) parent bodies that remained cold, i.e., into comets, because of the lack of aqueous or thermal alteration since particle aggregation; yet some Stardust olivines suggest mild thermal metamorphism. Primitive particles exhibit a diverse range of: structure and typology; size and size distribution of constituents; concentration and form of carbonaceous and organic matter; D-, N-, and O- isotopic enhancements over solar; Mg-, Fe-contentsof thesilicate minerals; the compositions and concentrations of sulfides, and of less abundant mineral species such as chondrules, CAIs and carbonates. The unifomity within a group of samples points to: aerodynamic sorting of particles and/or particle constituents; the inclusion of a limited range of oxygen fugacities; the inclusion or exclusion of chondrules; a selection of organics. The properites of primitive particles imply there were disk processes that resulted in different comets having particular selections of primitive materials. The diversity of primitive particles has implications for the diversity of materials in the protoplanetary disk present at the time and in the region where the comets formed.

Comet dust is primitive and shows significant dive↗