Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COPPER OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Hydrothermal synthesis and magnetic properties of CuO hollow microspheres

Graphical abstract: - Highlights: • CuO hollow microspheres were synthesized through hydrothermal route. • The possible growth mechanism was proposed according to the experimental results. • CuO hollow microspheres show an anomalous ferromagnetic behavior at 5 K and 300 K. - Abstract: In the present work, CuO hollow microspheres with the diameter about 2 μm were successfully synthesized through a facile hydrothermal method. The phase purity, morphologies and structure features of the as obtained products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Raman spectroscopy, respectively. It was found that reaction temperature, reaction time and different volume ratios of ethanol and distilled water played important roles on the morphologies of the obtained CuO hollow microspheres. The possible formation mechanism was also proposed according to the corresponding experimental results. The magnetic properties were investigated by superconducting quantum interference device, revealing that the CuO hollow microspheres exhibited an anomalous ferromagnetic behavior at 5 K and 300 K. At the same time, the origin of the ferromagnetism in CuO hollow microspheres was also discussed.

36 MATERIALS SCIENCE↗

Synthesis and characterization of g-C{sub 3}N{sub 4}/Cu{sub 2}O composite catalyst with enhanced photocatalytic activity under visible light irradiation

The prepared g-C{sub 3}N{sub 4}/Cu{sub 2}O composite exhibited the enhanced photocatalytic activity under visible-light irradiation due to the stronger ability in separation of electron–hole pairs, which was proven by the transient photocurrent measurement. - Highlights: • The coupled Cu{sub 2}O with g-C{sub 3}N{sub 4} of narrow-band-gap semiconductor has been designed. • g-C{sub 3}N{sub 4}/Cu{sub 2}O is prepared via an alcohol-aqueous based on chemical precipitation method. • g-C{sub 3}N{sub 4}/Cu{sub 2}O exhibits the enhanced photocatalytic activity under visible-light. • The enhanced photocatalytic activity is proven by the transient photocurrent test. • A mechanism for the visible-light-driven photocatalysis of g-C{sub 3}N{sub 4}/Cu{sub 2}O is revealed. - Abstract: To overcome the drawback of low photocatalytic efficiency brought by electron–hole pairs recombination and narrow photo-response range, a novel g-C{sub 3}N{sub 4}/Cu{sub 2}O composite photocatalyst was designed and prepared successfully. Compared with bare Cu{sub 2}O and g-C{sub 3}N{sub 4}, the g-C{sub 3}N{sub 4}/Cu{sub 2}O composite exhibited significantly enhanced photocatalytic activity for acid orange-II (AO-II) degradation under visible light irradiation. Based on energy band positions, the mechanism of enhanced visible-light photocatalytic activity was proposed.

36 MATERIALS SCIENCE↗

Characterization and photocatalytic activity of (ZnO–CuO)/SBA-15 nanocomposites synthesized by two-solvent method

Schematic between charge genenration and transfer for methylene orange degradation simulated by light. - Highlights: • Two-solvent method is used to prepare ZnO–CuO particles embedded in porous SBA-15. • The absorption edge of (ZnO–CuO)/SBA-15 composite is in the visible light regime. • The absorption intensity of the composite in visible light regime is enhanced. • The (ZnO–CuO)/SBA-15 composite has higher photocatalytic ability than Degussa P-25. - Abstract: Two-solvent method was employed to prepare ZnO–CuO nanoparticles embedded in mesoporous silica SBA-15 ((ZnO–CuO)/SBA-15). The as-obtained (ZnO–CuO)/SBA-15 nanocomposites were characterized by X-ray diffraction, transmission electron microscope, X-ray photoelectron spectroscopy, N{sub 2} adsorption porosimetry, and diffusive reflective UV–vis spectroscopy. The photocatalytic activity of (ZnO–CuO)/SBA-15 nanocomposites toward methylene orange was investigated under simulated solar light irradiation, and the measurement results indicated that (ZnO–CuO)/SBA-15 nanocomposites exhibit higher photodegradation activity toward methylene orange than commercial TiO{sub 2} P-25. The photocatalytic activity of (ZnO–CuO)/SBA-15 nanocomposites were found to be dependent on both the adsorption ability of the nanocomposites and the loading dosage of ZnO–CuO nanoparticles in SBA-15. The optimal loading dosage of ZnO–CuO nanoparticles was determined. Too high or too low loading will lower the photodegradation ability of (ZnO–CuO)/SBA-15 nanocomposites.

36 MATERIALS SCIENCE↗

Controlled preparation of Ag–Cu{sub 2}O nanocorncobs and their enhanced photocatalytic activity under visible light

Graphical abstract: The corncob-like Ag–Cu{sub 2}O nanostructure with suitably exposed Ag surface exhibited much higher photocatalytic activity than Ag@Cu{sub 2}O nanocables and Cu{sub 2}O nanowires. - Highlights: • Ag–Cu{sub 2}O nanocorncobs have been controllably prepared by a simple synthesis. • The possible formation mechanism of Ag–Cu{sub 2}O has been studied. • Ag–Cu{sub 2}O exhibits noticeable improved photocurrent compared with the pure Cu{sub 2}O NWs. • Ag–Cu{sub 2}O with suitably exposed Ag surface shows much higher photocatalytic activity. - Abstract: Novel corncob-like nano-heterostructured Ag–Cu{sub 2}O photocatalyst has been controllably prepared by adjusting the synthetic parameters, and the possible formation mechanism has been also studied. The photoelectrochemical and photocatalytic performances demonstrated that the as-prepared Ag–Cu{sub 2}O nanocorncobs exhibited higher photocatalytic activity than both pure Cu{sub 2}O nanowires and cable-like Ag@Cu{sub 2}O nano-composites. It was concluded that Ag–Cu{sub 2}O nanocorncobs with suitably exposed Ag surface not only effectively inhibit the recombination of electron–hole pairs but also suitably increase the active sites of electronic conduction, and thus increasing the photocatalytic activity under visible light irradiation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Octahedral core–shell cuprous oxide/carbon with enhanced electrochemical activity and stability as anode for lithium ion batteries

Highlights: • Core–shell octahedral Cu{sub 2}O/C is prepared by a one-step method. • Carbon shell is amorphous and uniformly decorated at the Cu{sub 2}O octahedral core. • Core–shell Cu{sub 2}O/C exhibits markedly enhanced capability and reversibility. • Carbon shell provides fast ion/electron transfer channel. • Core–shell structure is stable during cycling. - Abstract: Core–shell Cu{sub 2}O/C octahedrons are synthesized by a simple hydrothermal method with the help of carbonization of glucose, which reduces Cu(II) to Cu(I) at low temperature and further forms carbon shell coating at high temperature. SEM and TEM images indicate that the carbon shell is amorphous with thickness of ∼20 nm wrapping the Cu{sub 2}O octahedral core perfectly. As anode of lithium ion batteries, the core–shell Cu{sub 2}O/C composite exhibits high and stable columbic efficiency (98%) as well as a reversible capacity of 400 mAh g{sup −1} after 80 cycles. The improved electrochemical performance is attributed to the novel core–shell structure, in which the carbon shell reduces the electrode polarization and promotes the charge transfer at active material/electrolyte interface, and also acts as a stabilizer to keep the octahedral structure integrity during discharge–charge processes.

36 MATERIALS SCIENCE↗

Improved electrochemical performances of CuO nanotube array prepared via electrodeposition as anode for lithium ion battery

Graphical abstract: CuO nanotube array electrodes prepared by electrodeposition method exhibit an excellent lithium ion storage ability as anode of Li-ion battery. - Highlights: • CuO nanotube arrays are synthesized by an electrodeposition method. • CuO nanotube shows a high-rate performance. • CuO nanotube shows an excellent cycling performance. - Abstract: We report a facile strategy to prepared CuO nanotube arrays directly grown on Cu plate through the electrodeposition method. The as-prepared CuO nanotubes show a quasi-cylinder nanostructure with internal diameters of ca. ∼100 nm, external diameters of ca. ∼120 nm, and average length of ∼3 μm. As an anode for lithium ion batteries, the electrochemical properties of the CuO nanotube arrays are investigated by cyclic voltammetry (CV) and galvanostatic charge/discharge tests. Due to the unique nanotube nanostructure, the as-prepared CuO electrodes exhibit good rate performance (550 mAh g{sup −1} at 0.1 C and 464 mAh g{sup −1} at 1 C) and cycling performance (581 mAh g{sup −1} at 0.1 C and 538 mAh g{sup −1} at 0.5 C)

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Spin-anticrossing effects in Co–SiO{sub 2}–Fe and ZnO–SiO{sub 2}–CuO three-nanolayer devices

Highlights: • Development of a new spintronic device. • Development of spin anticrossing spectroscopy of nanolayers. • Development of theory of quantum spin-polarized filter. - Abstract: Presently we report measurements of the spin-anticrossing spectra in the Co–SiO{sub 2}–Fe and ZnO–SiO{sub 2}–CuO three-nanolayer sandwich structures. The spin-anticrossing spectra in these systems are quite specific, differing from those observed earlier in other similar structures built of different materials. The theoretical model developed earlier is extended and used to interpret the available experimental results. A detailed ab initio analysis of the magnetic-field dependence of the output magnetic moment is also performed. The model predicts a spin-anticrossing spectrum comprising a series of peaks, with the spectral structure determined by several factors, discussed in the paper.

36 MATERIALS SCIENCE↗

Effect of nanographene platelets on adsorption and sonophotocatalytic performances of TiO2/CuO composite for removal of organic pollutants

Highlights: • TiO{sub 2}/CuO composite incorporated with nanographene platelets (NGP). • Catalytic ability of TiO{sub 2}/CuO/NGP composite for removal of MB investigated. • Better adsorption ability for MB compared to TiO{sub 2}/CuO composite without NGP. • Adsorption ability increases with increasing NGP content up to optimal level. • TiO{sub 2}/CuO/NGP with 10 wt% NGP exhibits best photo- and sonophoto-catalysis. - Abstract: TiO{sub 2}/CuO composites incorporated with different amounts of nanographene platelets (NGP) were synthesized by hydrothermal processing. The TiO{sub 2}/CuO/NGP composite was characterized by X-ray diffraction, transmission electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, dynamical light scattering, Raman spectroscopy, Fourier–transform infrared spectroscopy, ultraviolet (UV)-visible diffuse reflectance spectroscopy, Brunauer—Emmett—Teller (BET) surface area analysis, and electron spin resonance. The catalytic ability of the composite for the removal of methylene blue from an aqueous solution was examined by adsorption, photocatalytic, and sonophotocatalytic experiments. The composite was found to exhibit better adsorption ability for methylene blue compared to the TiO{sub 2}/CuO composite without NGP. The photocatalytic activity of the composite was examined by UV and visible (Vis) light irradiation, while the sonophotocatalytic activity was examined by a combination of UV and Ultrasound (UV + US) and Vis + US. Both examinations showed that the light and ultrasonic responses were enhanced by compositing with NGP.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Hierarchical Cu nanoparticle-aggregated cages with high catalytic activity for reduction of 4-nitrophenol and carbon dioxide

Highlights: • Synthesizing a challenging structure, hierarchical ∼10 nm Cu NP-aggregated sub-micro cages. • Cu cages showed an excellent catalytic activity in the reduction of 4-nitrophenol by NaBH{sub 4}. • This is the first report on using a Cu NP-based heterogeneous catalyst for the hydrogenation CO{sub 2} to formate. - Abstract: Hierarchical ∼10 nm Cu nanoparticle (NP)-aggregated sub-micro cage catalysts (diameter: ∼800 nm) with a hollow interior and porous shell were prepared from SiO{sub 2} encapsulated Cu{sub 2}O nanoparticle aggregates (NPAs) using a facile and scalable method. The Cu cages were analyzed by field emission-scanning electron microscopy (FE-SEM), energy-dispersed X-ray (EDX), transmission electron microscopy (TEM), high-resolution TEM, selected area electron diffraction (SAED), X-ray diffraction (XRD) and Brunauer-Emmett-Teller (BET). Owing to the small primary Cu NPs and characteristic porous shell and hollow interior, the Cu cages showed an extraordinarily high catalytic activity in the reduction of 4-nitrophenol by NaBH{sub 4} in aqueous solution. The activity factor (K = 520 s{sup −1} g{sup −1}) is approximately 2.8 times greater than the previous highest K value of unsupported Cu catalysts. In addition, the excellent catalytic activity of the Cu cages in hydrogenation of CO{sub 2} to formate, with a TON value of 58 at 200 °C, was comparable to that of various noble metal-supported heterogeneous catalysts and surpassed the vast majority of homogeneous first-row transition metal catalysts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Study on gas sensing mechanism in p-CuO/n-ZnO heterojunction sensor

Highlights: • Gas adsorption sites can be enhanced by forming ZnO:CuO heterojunction. • Ethanol can access all the surface of sensing materials due to chunk-shaped morphology. • Energy band diagram model is proposed to explain the gas sensing mechanism. - Abstract: This work describes the need of more reactive sites for gas sensing. The formation of heterojunctions may increase the number of reactive sites. With this aim, ZnO:CuO nanoparticles with heterojunction was synthesized by co-precipitation method. XRD measurements on ZnO and ZnO:CuO (90:10) nanoparticles revealed the hexagonal wurtzite structure of ZnO with the signature of CuO phases in ZnO:CuO nanoparticles. The morphological analysis by SEM and TEM showed that the nanoparticles are arranged in such a way to form distorted rod-like structures, which are stacked side by side to give a chunk-shaped morphology. High resolution TEM and Fourier transform infrared analyses revealed the presence of defects in the sample. ZnO:CuO nanoparticles showed high sensitivity toward ethanol, which is associated with the introduction of large number of reactive sites and the formation of heterojunctions with the addition of CuO. The sensing mechanism behind the sensing materials is also proposed using energy band diagrams.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Facile preparation of CuO/g-C3N4 with enhanced photocatalytic degradation of salicylic acid

Highlights: • CuO /g-C{sub 3}N{sub 4} sheets were prepared by using a novel one-pot method. • CuO/g-C{sub 3}N{sub 4} exhibited higher catalytic activity than the parent g-C{sub 3}N{sub 4} material. • The increased photocatalytic activity was proposed. - Abstract: CuO particles supported on graphitic carbon nitride (g-C{sub 3}N{sub 4}) nanosheeets were prepared using a novel one-pot method. In the presence of ammonium nitrate, different mass ratios of copper nitrate/melamine were used to fabricate these catalysts, which were characterized using XRD, N{sub 2}-physisorption, FT-IR, TEM, XPS and UV–vis analysis. The catalytic performance of CuO/g-C{sub 3}N{sub 4} was evaluated by photodegrading salicylic acid under visible-light irradiation. Among these novel catalysts, CuO(1.0)/g-C{sub 3}N{sub 4} was found to exhibit the highest catalytic activity, which was more than 100% greater than the parent g-C{sub 3}N{sub 4} material. The improved photocatalytic properties of CuO/g-C{sub 3}N{sub 4} may be ascribed to the formation of p-n heterojunctions between CuO and g-C{sub 3}N{sub 4}, resulting in the effective separation of photogenerated electron-hole pairs and the enhanced absorption of visible light. Furthermore, the CuO/g-C{sub 3}N{sub 4} composites had excellent stability and reused for five times without obvious loss of activity.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The synthesis of CuO and NiO nanoparticles by facile thermal decomposition of metal-Schiff base complexes and an examination of their electric, thermoelectric and magnetic Properties

Highlights: • Thermal decomposition of Schiff base complexes provides a convenient and effective pathway to fabricate CuO and NiO NPs. • The electrical conduction in CuO NPs and NiO NPs is governed by intrinsic band-to-band type and large polarons conduction mechanism, respectively. • The thermoelectric measurements confirm that the NPs are P-type degenerate semiconductors. • The NPs show weak ferromagnetic ordering at room temperature and antiferromagnetic to paramagnetic transition with high dipolar interaction. - Abstract: In this study, CuO and NiO NPs have been synthesized by facile thermal decomposition of Schiff base complexes and their physical properties have been examined. The synthesized CuO and NiO NPs are crystallized in polycrystalline monoclinic and cubic structures with average particle size 17 ± 0.4 and 62 ± 1 nm, respectively. The electrical conductivity measurements confirm that the conduction in the CuO NPs is a band-to-band type while the conduction in the NiO NPs is governed by the large polaron conduction mechanism. The thermoelectric measurements confirm that the CuO and NiO NPs are P-type degenerate semiconductors with room temperature Seebeck coefficients equal to 89.9 and 12.1 mV/K, respectively. The magnetic measurements exhibit that the NPs have weak ferromagnetic ordering and antiferromagnetic to paramagnetic transition with high dipolar interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Focused ion beam directed self-assembly (Cu2O on SrTiO3 ): FIB pit and Cu2O nanodot evolution

A gallium focused ion beam has been used to create discrete pits on the surface of a SrTiO3 (100) surface with the idea that these pits will serve as the nucleation sites for subsequent Cu2O quantum dot growth. Immediately after pit formation and following wet chemical etching and thermal annealing of the surface, the concentration of gallium within these pits has been analyzed using a high-resolution Auger system,. Using atomic force microscopy, the geometry of the pits has also been determined following etching and annealing. Growth of Cu2O quantum dots on the patterned surfaces has been performed. Growth of Cu2O quantum dots within the pits is the primary mode of dot formation. In several samples, dot growth within pits appears to occur by a two-step process with pits filling prior to initiation of a second, distinct phase of quantum dot growth above the plane of the original SrTiO3 surface.

36 MATERIALS SCIENCE↗

CO 2 Hydrogenation to Methanol over Inverse ZrO 2 /Cu(111) Catalysts: The Fate of Methoxy under Dry and Wet Conditions

Understanding the surface chemistry of CH 3 O species is essential for the production of methanol by CO 2 hydrogenation over Cu-based heterogeneous catalysts, as it facilitates the rational design of more efficient conversion processes. Recent research has identified inverse ZrO 2 /Cu catalysts as highly active and selective systems for the transformation of CO 2 to methanol with a performance that can be better than that of commercial Cu/ZnO catalysts. Here, we employed synchrotron-based ambient pressure X-ray photoelectron spectroscopy (AP-XPS) and calculations based on density functional theory (DFT) to understand the fate of CH 3 O groups under dry and wet environments. AP-XPS spectra revealed that under CO 2 hydrogenation conditions, formate and methoxy are two key intermediates to produce methanol. Furthermore, there are three different types of reactive sites on the surface: One is active for methoxy adsorption, which is stable and responsible for the methanol synthesis; Another one transforms CO 2 into CO; and a third one is active for CO 2 and methoxy dissociation, leading to C and methane formation. The theoretical calculations indicate that CH 3 OH readily dissociates to CH 3 O species following a highly exothermic (ΔE = -20.99 kcal/mol) and barrierless process. The water produced by the reverse water-gas shift reaction (CO 2 + H 2 → H 2 O + CO) can prevent the decomposition of CH 3 O species. We discovered that by introducing a tiny amount of water vapor (2 × 10 -6 Torr) into the reaction chamber, the energy barrier for the reaction CH 3 O(ads) + H(ads) → CH 3 OH(gas) is dramatically reduced. AP-XPS and computational modelling showed that water is quite capable of extracting adsorbed methoxy to form gaseous methanol. With this in mind, one could boost the methanol selectivity by adding appropriate amounts of water or steam, which is an inexpensive and feasible solution for industrial operations.

36 MATERIALS SCIENCE↗

C 1 Chemistry on Metal Carbide Nanoparticles: Boosting the Conversion of CO 2 and CH 4

The studies described in this Perspective show that transition metal carbide (TMC) nanoparticles can be very useful for the activation of three molecules located at the heart of C 1 chemistry: H 2 , CH 4 , and CO 2 . They also can play a major role in the trapping and conversion of two major greenhouse gases. A combination of experiment and theory has shed light on the physical and chemical properties of these systems, which can be very different from those of bulk carbides. Molecular clusters of these compounds, which can be inserted inside the cages of zeolites or carbon nanotubes, have unsaturated metal and carbon atoms that frequently work in a cooperative way when dealing with hard-to-activate molecules, such as CH 4 and CO 2 . These molecular clusters can evolve into nanoparticles of small to medium size (<15 nm) that have unique carbon/metal ratios and structures not seen in the bulk metal carbides. Even when their structures are cuts from bulk lattices, the TMC nanoparticles have corner or edge atoms that are active for the cleavage and conversion of C–H and C–O bonds. In this paper, we cover experimental and theoretical studies with well-defined metal carbide nanoparticles prepared by different methods, free and supported on diverse substrates. The Perspective ends with a discussion of current challenges and potential applications.

03 NATURAL GAS↗

Effect of the Chemical States of Copper on Methanol Decomposition and Oxidation

Here, the decomposition and oxidation reactions of CH 3 OH over metallic Cu(100) and Cu 2 O-covered Cu(100) surfaces are studied using a combination of in-situ ambient-pressure X-ray photoelectron spectroscopy, Auger electron spectroscopy, and density functional theory calculations. We identify the sequential chemical transformation pathways from bond cleavage to the formation of intermediates and final products under operational conditions. Accumulative surface adsorption of CH 3 O species on metallic Cu(100) impedes the decomposition of CH 3 OH. Co-dosing on metallic Cu(100) with low pressures of 1·10 -4 Torr CH 3 OH + 1·10 -4 Torr O 2 results in partial oxidation of CH 3 OH, where the chemisorbed O ads reduces surface sites available for CH 3 O adsorption, decreasing the surface activity for CH 3 OH decomposition. In contrast, the Cu 2 O overlayer formed under the elevated pressures of 0.33 Torr CH 3 OH + 0.66 Torr O 2 promotes the total oxidation of CH 3 OH into the final products of CO 2 and H 2 O, arising from the active reaction 2 between lattice O within Cu 2 O and intermediates of CH 3 O, CH 2 O, HCOO, and CO. Despite the more favorable O-H bond scission, C-O bond scission also occurs to result in surface accumulation of CH x on metallic Cu(100), blocking active sites for decomposition reactions of CH 3 OH and CH 3 O. By comparison, the CH x species on the Cu 2 O-covered Cu(100) undergo oxidation into CO 2 and H 2 O with lattice O in the Cu 2 O overlayer, thereby freeing active sites for the total oxidation of CH 3 OH. These results highlight the distinct roles of metallic Cu and Cu 2 O in the pathways of CH 3 OH decomposition and oxidation reactions, offering practical insights for the design of Cu-based catalysts with tailored reactivity and selectivity.

36 MATERIALS SCIENCE↗

Stability and Effects of Subsurface Oxygen in Oxide-Derived Cu Catalyst for CO 2 Reduction

Here, oxide-derived copper (OD-Cu) catalysts are promising candidates for the electrochemical CO 2 reduction reaction (CO 2 RR) due to the enhanced selectivity toward ethylene over methane evolution, which has been linked to the presence of subsurface oxygen (O sb ). In this work, O sb is investigated with theoretical methods. Although O sb is unstable in slab models, it becomes stabilized within a “manually” reduced OD-Cu nanocube model which was calculated by self-consistent charge density functional tight binding (SCC-DFTB). The results obtained with SCC-DFTB for the full nanocube were confirmed with subcluster models extracted from the nanocube, calculated with both density functional theory (DFT) and SCC-DFTB. The higher stability of O sb in the nanocube is attributed to the disordered structure and greater flexibility. The adsorption strength of CO on Cu(100) is enhanced by O sb withdrawing electron density from the Cu atom, resulting in reduction of the σ-repulsion. Hence, the coverage of CO may be increased, facilitating its dimerization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗