Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONFIGURABLE APPLICATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

A look at V/STOL for business aircraft.

Attempt to ascertain the economic viability of the V/STOL capability for business aircraft and the manner in which this viability depends on the aircraft concept. A cost-benefit analysis is presented which indicates that a VTOL business aircraft would be more viable economically than a contemporary turbine-powered business aircraft. The combination of traveler's time value and trip distance for which each aircraft dominates is shown. The significance of disk loading in V/STOL concept application is discussed, and preliminary design configuration studies for three different business-aircraft-sized V/STOLs, using three concepts covering a range of disk loading, are presented as examples. Finally, a discussion of operational aspects of interest to future users of V/STOL business aircraft is presented which centers around the requirements for routine IFR terminal-area operations.

Feistel, T. W.↗

Development and testing of improved polyimide actuator rod seals at higher temperatures for use in advanced aircraft hydraulic systems

Polyimide second stage rod seals were evaluated to determine their suitability for application in advanced aircraft systems. The configurations of the seals are described. The conditions of the life cycle tests are provided. It was determined that external rod seal leakage was within prescribed limits and that the seals showed no signs of structural degradation.

Robinson, E. D.↗

Lightweight evacuated multilayer insulation systems for the space shuttle vehicle

The elements in the evacuated multilayer insulation system were investigated, and the major weight contributors for optimization selected. Outgassing tests were conducted on candidate vacuum jacket materials and experiments were conducted to determine the vacuum and structural integrity of selected vacuum jacket configurations. A nondestructive proof test method, applicable to externally pressurized shells, was validated on this program.

Barclay, D. L.↗

A steering law for three double-gimbal control moment gyro systems

A steering law for three double-gimbal control moment gyro (CMG) systems is proposed. This steering law is applicable to systems with almost any configuration of CMGs and the CMG-out operation needs no special modification. Examples of three double gimbal CMG systems in an orthogonal configuration and in a parallel configuration are shown along with the results of digital simulations. Simulation results show that any command torque can always be met except when the system is in a singular state and that, whenever the system is in, or close to, a singularity, the steering law drives the system state out of the vicinity of the singularity.

Yoshikawa, T.↗

Earth resources mission performance studies. Volume 2: Simulation results

Simulations were made at three month intervals to investigate the EOS mission performance over the four seasons of the year. The basic objectives of the study were: (1) to evaluate the ability of an EOS type system to meet a representative set of specific collection requirements, and (2) to understand the capabilities and limitations of the EOS that influence the system's ability to satisfy certain collection objectives. Although the results were obtained from a consideration of a two sensor EOS system, the analysis can be applied to any remote sensing system having similar optical and operational characteristics. While the category related results are applicable only to the specified requirement configuration, the results relating to general capability and limitations of the sensors can be applied in extrapolating to other U.S. based EOS collection requirements. The TRW general purpose mission simulator and analytic techniques discussed in this report can be applied to a wide range of collection and planning problems of earth orbiting imaging systems.

Source record↗

A study of commuter airplane design optimization

Problems of commuter airplane configuration design were studied to affect a minimization of direct operating costs. Factors considered were the minimization of fuselage drag, methods of wing design, and the estimated drag of an airplane submerged in a propellor slipstream; all design criteria were studied under a set of fixed performance, mission, and stability constraints. Configuration design data were assembled for application by a computerized design methodology program similar to the NASA-Ames General Aviation Synthesis Program.

Roskam, J.↗

Calculation of lateral-directional stability derivatives for wing-body combinations with and without jet-interaction effects

A theoretical method is presented for predicting the lateral-directional stability derivatives of wing-body combinations with or without the blowing jet effect. The fuselage effect is accounted for by the axial distribution of vortex multiplets. Comparison of the predicted results with experiments and other theoretical methods show good agreement for configurations without the blowing jet. More applicable experimental data with blowing jets are needed to establish the accuracy of the theory.

Lan, C. E.↗

Blade fragment energy analysis

Two classes of fan blade fragments were considered in an analysis of blade fragment energy. The first, of relatively small size (.15 pound) and energy, tends to rebound from the fan and case when liberated in an FOD encounter. These small fragments have relatively low secondary damage potential and are less demanding in terms of protection. The larger fan blade fragments are ejected in a more direct release trajectory with higher energy and hence can represent a higher potential hazard. Simplified analytical methods were used to describe blade fragment energy transfer kinematics, establish fragment energy levels, evaluate damage potential and configure protection. The approach, methodology, and application are discussed as a possible building block for other applications. Development of effective local protection using Kevlar is also discussed. Analysis methods developed and applied to the rebound fragment problem and to the large direct release fragment problem are described.

Oconnor, M. A., Jr.↗

Minimum induced drag configurations with jet interaction

A theoretical method is presented for determining the optimum camber shape and twist distribution for the minimum induced drag in the wing-alone case without prescribing the span loading shape. The same method was applied to find the corresponding minimum induced drag configuration with the upper-surface-blowing jet. Lan's quasi-vortex-lattice method and his wing-jet interaction theory was used. Comparison of the predicted results with another theoretical method shows good agreement for configurations without the flowing jet. More applicable experimental data with blowing jets are needed to establish the accuracy of the theory.

Pao, J. L.↗

A design procedure for a tension-wire stiffened truss-column

A deployable, tension wire stiffened, truss column configuration was considered for space structure applications. An analytical procedure, developed for design of the truss column and exercised in numerical studies, was based on equivalent beam stiffness coefficients in the classical analysis for an initially imperfect beam column. Failure constraints were formulated to be used in a combined weight/strength and nonlinear mathematical programming automated design procedure to determine the minimum mass column for a particular combination of design load and length. Numerical studies gave the mass characteristics of the truss column for broad ranges of load and length. Comparisons of the truss column with a baseline tubular column used a special structural efficiency parameter for this class of columns.

Greene, W. H.↗

Test Bed Concentrator (TBC)

A point focussing concentrator design adapted from an existing communications antenna for use in a solar test bed application is described. The structure design, configured for use with JPL's spherical radius mirror panels, made no attempt toward optimization. The key objectives of stiffness, pointing accuracy, and timely delivery were exceeded. The system weight is approximately 16,000 Kg (36,000 lbs) and has a calculated 1 sigma system error of 0.03 degrees.

Goldberg, V. R.↗

Structural sizing considerations for large space structures

A number of missions for the space shuttle were proposed which involve placing large truss platforms on-orbit. These platforms range in size from tens of meters in span for reflector application to several thousand meters for solar power collector application. These proposed sizes and the operational requirements considered are unconventional in comparison to Earthbound structures and little information exists concerning efficient proportions of the structural elements forming the framework of the platforms. Such proportions are of major concern because they have a strong influence on the packaging efficiency and, thus, the transportation effectiveness of the shuttle. The present study is undertaken to: (1) identify efficient ranges of application of deployable and erectable platforms configured for shuttle transport to orbit, and (2) determine sensitivity to key parameters of minimum mass deployable and erectable platform designs.

Heard, W. L., Jr.↗

Space Technology Experiments Platform (STEP) overview

The Space Technology Experiments Platform (STEP) concept is summarized. It is shown that STEP is the enabling link between the research community and the space environment made accessible by the Space Transportation System (STS). The constituent elements of the research community are identified, the pertinent space environment attributes are listed, and the major guidelines applicable to establishing the specific STEP configuration are identified.

Harris, J. E.↗

Pattern recognition for Space Applications Center director's discretionary fund

Results and conclusions are presented on the application of recent developments in pattern recognition to spacecraft star mapping systems. Sensor data for two representative starfields are processed by an adaptive shape-seeking version of the Fc-V algorithm with good results. Cluster validity measures are evaluated, but not found especially useful to this application. Recommendations are given two system configurations worthy of additional study,

Singley, M. E.↗

Automated mesoscale winds derived from GOES multispectral imagery

An automated technique for extracting mesoscale winds from sequences of GOES VISSR image pairs was developed, tested and configured for quasi-real time/research applications on a computing system which gives mesoscale wind estimates at the highest spatial/temporal resolution possible from the VISSR imagery down to a wind vector separation of 10 km. Preprocessing of imagery using IR resampling, VIS edge preserving filtering, and reduced VIS resolution averaging improved height assignments and vector extraction for 10, 15, and 30 min imagery. An objective quality control system provides much greater than 99% accuracy in eliminating questionable wind estimates. Automated winds generally have better spatial coverage and density, and have random error estimates half as large as the manual winds. Dynamical analysis of cloud wind divergence revealed temporally consistent convergence centers on the meso beta scale that are highly correlated with on going and future developing convective storms. The entire system of computer codes was successfully vectorized for execution on an array processor resulting in job turnaround in less than one hour.

Wilson, G. S.↗

Application of a two-dimensional grid solver for three-dimensional problems

A two-dimensional elliptic grid solver is presented and its application to various three-dimensional configurations, both internal and external, is demonstrated. The method uses proper forcing terms to cluster grid points near boundaries with a specified grid spacing and allows grid lines to intersect the boundaries at a specified angle. By segmenting the region, grid results are generated for sharp leading edged configurations and wing-vertical tail combinations.

Shankar, V.↗

Computational aspects of unsteady flows

The calculation of unsteady flows and the development of numerical methods for solving unsteady boundary layer equations and their application to the flows around important configurations such as oscillating airfoils are presented. A brief review of recent work is provided with emphasis on the need for numerical methods which can overcome possible problems associated with flow reversal and separation. The zig-zag and characteristic box schemes are described in this context, and when embodied in a method which permits interaction between solutions of inviscid and viscous equations, the characteristic box scheme is shown to avoid the singularity associated with boundary layer equations and prescribed pressure gradient. Calculations were performed for a cylinder started impulsively from rest and oscillating airfoils. The results are presented and discussed. It is conlcuded that turbulence models based on an algebraic specification of eddy viscosity can be adequate, that location of translation is important to the calculation of the location of flow separation and, therefore, to the overall lift of an oscillating airfoil.

Cebeci, T.↗

An overview of DREV's activities on pulsed CO2 laser transmitters: Frequency stability and lifetime aspects

After introducing the desired features in a transmitter for laser radar applications, the output characteristics of several configurations of frequency-stable TEA-CO2 lasers are reviewed. Based on work carried out at the Defence Research Establishment Valcartier (DREV), output pulses are examined from short cavity lasers, CW-TEA hybrid lasers, and amplifiers for low power pulses. It is concluded that the technique of injecting a low-power laser beam into a TEA laser resonator with Gaussian reflectivity mirrors should be investigated because it appears well adapted to producing high energy, single mode, low chirp pulses. Finally, a brief report on tests carried out on catalysts composed of stannic oxide and noble metals demonstrates the potential of these catalysts, operating at close to room temperature, to provide complete closed-cycle laser operation.

Cruickshank, James↗