Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COMBUSTION PHYSICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54

Repetitively pulsed nanosecond discharge plasma decay in propane–oxygen gas mixture in the presence of a heating electric field

Plasma decay in the afterglow of a repetitively pulsed nanosecond discharge in a stoichiometric propane–oxygen mixture was experimentally investigated when a weak heating DC electric field was applied and in its absence. The discharge was ignited at room gas temperature and a pressure of 1–2 Torr and was characterized by low specific energy inputs (<0.004 eV per molecule in one pulse). Using microwave interferometry, the temporal evolution of the electron density during plasma decay was studied, and the effective recombination coefficients were obtained from data processing. It was shown that the rate of plasma decay behaved in a non-monotonic manner with increasing degree of propane oxidation; at first the decay rate grew, then passed through a maximum, fell and saturated in the limit of a large (~2000) number of pulses. In this limit, the effect of the heating DC electric field on the plasma decay decreased with approaching chemical equilibrium. Numerical simulation of the observed effects was performed for low and high oxidation degrees of propane taking into account changes in the composition of positive ions in the plasma. Good agreement was obtained between measurements and calculations of the electron density during plasma decay in these cases. Here it was shown that the formation of cluster ions in the discharge afterglow plays a fundamental role. The plasma decay was controlled by electron recombination with hydrocarbon cluster ion at low oxidation degree of propane and with water cluster (hydrated) ions at high oxidation degree. A hypothesis was proposed to explain the observed nonmonotonic behavior of the plasma decay rate with an increase in the propane oxidation in the discharge, based on the formation of hydrated hydrocarbon ions C x H y + (H 2 O) k at moderate oxidation degrees.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A framework for optimizing oxygen vacancy formation in doped perovskites

Perovskite materials are being considered for a variety of applications due to their demonstrated capacity to rapidly transport lattice oxygen. Importantly, controlling the dopant concentration in the perovskite lattice has been shown to tune the oxygen vacancy formation energy, an important descriptor for oxygen ion diffusivity. In this work, we utilize BaFe 1-x In x O 3-δ as a model perovskite for investigating the role that atomic-scale patterns of substitutional doping at the B site has on the formation of oxygen vacancies. Using this model material, we demonstrate a framework for evaluating the atomic-scale properties of possible dopant motifs exhibited within a doped perovskite lattice. For each relevant motif, we calculate via density functional theory the oxygen excess energy, which is a robust descriptor for evaluating the bulk oxide ion diffusion. Here, we then formulate and solve a mathematical optimization model to identify patterns of dopant placement that yield materials with desirable properties. These results provide optimistic targets for material performance and may inform future material synthesis efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Energy-effective and low-cost carbon capture from point-sources enabled by water-lean solvents

Aqueous amines, as the most mature carbon capture technology, are subject to high energy and cost penalties due to the large water content in their formulations. Emerging technologies are in demand to enable a transition to a low-carbon global economy. However, rigorous process modeling and techno-economic analyses are limited for emerging carbon capture technologies. Here, four CO 2 -Binding Organic Liquids (CO 2 BOLs), all water-lean solvents were presented as promising options towards energy-effective and low-cost carbon capture from point sources. Rigorous solvent property and process models were developed in Aspen Plus for a coal-fired power plant with CO 2 BOL-based carbon capture unit. Techno-economic analyses were conducted in 2018 US pricing basis. The results suggest that water-lean formulations can minimize water condensation and vaporization, leading to a 36% energy saving compared with aqueous amines. Indeed, these CO 2 BOLs can capture up to 97–99% CO 2 from coal fired plant. The estimated carbon capture cost is about $40/tonne CO 2 at 90–97% carbon capture rate, about 12–23% less expensive than the conventional aqueous amine technology. The comparison between these CO 2 BOLs showed that in addition to vapor liquid equilibrium and kinetics (key properties for aqueous solvents), viscosity, volatility, and hydrophobicity, also have strong impacts on the performance of water-lean solvents. The methods presented in this work can be used to evaluate other emerging carbon capture technologies, while the results linking costs and performance of carbon capture solvents with their properties. Additionally, this work identifies research directions and targets for further reductions in total costs of capture from either cost or energy perspectives for these leading water-lean solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CHARACTERIZATION OF LOW-FLAMMABILITY ELECTROLYTES FOR LITHIUM-ION BATTERIES

In an effort to develop low-flammability electrolytes for a new generation of Li-ion batteries, we have evaluated physical and electrochemical properties of electrolytes with two proprietary phosphazene additives. We have studied performance quantities including conductivity, viscosity, flash point, and electrochemical window of electrolytes as well as formation of solid electrolyte interphase (SEI) films. In the course of study, the necessity for a simple method of SEI characterization was realized. Therefore, a new method and new criteria were developed and validated on 10 variations of electrolyte/electrode substrates. Based on the summation of determined physical and electrochemical properties of phosphazene-based electrolytes, one structure of phosphazene compound was found better than the other. This capability helps to direct our further synthetic work in phosphazene chemistry.

25 ENERGY STORAGE↗

Effect of Nitrogen Additives on Flame Retardant Action of Tributyl Phosphate: Phosphorus – Nitrogen Synergism

The effect of nitrogen additives like urea, guanidine carbonate and melamine formaldehyde on the flame retardant efficacy of tributyl phosphate (TBP) has been investigated. From the LOI tests on treated cotton it is clear that the nitrogen additives have synergistic action. Estimation of activation energy of decomposition of treated cotton indicated that nitrogen additives enhance the thermal stability during the burning process. SEM pictures of chars formed after LOI test showed the formation of protective polymeric coating on the surface. The surface of chars formed were evaluated using FTIR-ATR and XPS analysis which showed that the coating was composed of Phosphorus-Nitrogen-Oxygen containing species. Formation of this coating during the burning process could lead to the synergistic interaction of phosphorus and nitrogen. Based on the experimental data we have further proposed several reaction mechanisms which could contribute to synergistic action and formation of protective coating on the surface of char.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of bacterial inoculants on phytomining of metals from waste incineration bottom ash

Highlights: • Plants inoculated with PGP-bacteria were grown on waste incineration bottom ash. • Rhizobacteria Rhodococcus erythropolis P30 enhanced biomass of Nicotiana tabacum. • Selected PGP-strains enhanced biomass and nutritional status of Salix smithiana. • Strains enhancing growth on contaminated soil had a similar effect on bottom ash. • Bacterial inoculants did not enhance trace element accumulation in plants. - Abstract: Waste incineration bottom ash is considered a secondary resource for valuable trace elements (TE), which is currently neglected in most European countries. Phytomining could potentially recover valuable TE from such waste materials but is still at an exploratory stage with many challenges. The use of bioaugmentation to improve plant growth and TE accumulation of metal-tolerant high biomass plants growing on waste incineration bottom ash was evaluated. Bacterial strains that were previously isolated from rhizosphere, roots and contaminated soil were selected according to their plant growth promoting characteristics and tolerance to the bottom ash substrate. Those selected bacterial strains were tested for their beneficial effects on Nicotiana tabacum and Salix smithiana with regards to phytomining. The rhizobacterial strain Rhodococcus erythropolis P30 enhanced the shoot dry weight of N. tabacum by on average 57% compared to the control plants. Several bacterial inoculants enhanced biomass production and the nutritional status of S. smithiana. Moreover, those bacterial strains previously described to enhance biomass production of N. tabacum and members of the Salicaceae on TE-contaminated soils, also enhanced biomass production of these species on bottom ash. However, bacterial inoculants could not enhance trace element accumulation in plants.

09 BIOMASS FUELS↗

Probing High-Temperature Amine Chemistry: Is the Reaction NH 3 + NH 2 ⇌ N 2 H 3 + H 2 Important?

The reaction NH 3 + NH 2 ⇌ N 2 H 3 + H 2 (R1) has been identified as a key step to explain experimental results for pyrolysis and oxidation of ammonia. However, no direct experimental or theoretical evidence for the reaction has been reported. In the present work, the reaction was studied by ab initio theory and by reinterpretation of experimental data. We could not locate a transition state for R1 occurring as a direct process, but alternative mechanisms yielded an upper bound to k 1 of 1.5 × 10 13 exp(–58.9 kcal mol –1 /RT) cm 3 mol –1 s –1 over 1000–2500 K, several orders of magnitude lower than values applied in modeling. Consistent with the theoretical work, re-evaluation of NH 3 pyrolysis data supported a very low value of k 1 . However, this finding opens up a novel unresolved issue. Current kinetic models cannot capture the NH 3 oxidation behavior in a number of laminar flow reactor and jet-stirred reactor experiments without adopting an improbably high value for k 1 . Furthermore, important oxidation steps might be underestimated or missing from mechanisms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Utilizing Quantum Cascade Lasers for Ultranarrow Velocity Resolution and Quantum-State Selectivity in Molecular Beam Scattering and Spectroscopy

Here, we demonstrate the capability of a narrow linewidth quantum cascade laser (QCL) to selectively excite a very narrow velocity range of nitric oxide (σ ≤ 7(3) m/s) with a pure ro-vibrational quantum state. By implementing a counter-propagating geometry, the molecules are selectively excited according to the Doppler shift of the ro-vibrational transition frequency such that the velocity width associated with the excited molecules depends only on the QCL linewidth. We demonstrate a velocity distribution limited by the effective linewidth of our free-running QCL (Γ = 3.2 MHz). Our development provides a cost-effective, flexible approach to resolve quantum-state selective chemical dynamics with excellent velocity resolution in a wide variety of molecules with infrared-active transitions. This technique has been formulated to provide ultrahigh collisional energy resolution in molecular beams to delineate final quantum-state product pairs in studies of molecular collisions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Process Engineering to Increase the Layered Phase Concentration in the Immediate Products of Flame Spray Pyrolysis

Flame-spray-pyrolysis (FSP) is a robust and scalable process to synthesize particles at the commodity-scale. FSP has been used to produce the precursor powders which were converted to the layered structure $(R\bar{3m} \text { phase})$ by a postannealing step in making nickel-rich cathode materials (NCMs). Theoretically, the high flame temperature (normally >1500 K) in FSP can provide adequate energy for the phase conversion from rock-salt to layered structures and potentially enables one-step synthesis. However, the high flame temperature is a critical issue to cause lithium loss and structural degradation, preventing the formation of the layered phase. Here, guided by the gaseous nucleation theory, we implemented several FSP processes with different solution recipes. The layered phase concentration in the as-burned products can be increased with the solution enthalpies. By adding a rapid quench step to suppress the lithium loss and phase degradation, the layered phase can be further increased. This work contributes new ideas to innovating process regarding the process efficiency and throughput of manufacturing cathode materials at a large scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Formation of the diphenyl molecule in the crossed beam reaction of phenyl radicals with benzene

The chemical dynamics to form the D5-diphenyl molecule, C{sub 6}H{sub 5}C{sub 6}D{sub 5}, via the neutral-neutral reaction of phenyl radicals (C{sub 6}H{sub 5}) with D6-benzene (C{sub 6}D{sub 6}), was investigated in a crossed molecular beams experiment at a collision energy of 185 kJ mol{sup -1}. The laboratory angular distribution and time-of-flight spectra of the C{sub 6}H{sub 5}C{sub 6}D{sub 5} product were recorded at mass to charge m/z of 159. Forward-convolution fitting of our data reveals that the reaction dynamics are governed by an initial addition of the phenyl radical to the {pi} electron density of the D6-benzene molecule yielding a short-lived C{sub 6}H{sub 5}C{sub 6}D{sub 6} collision complex. The latter undergoes atomic deuterium elimination via a tight exit transition state located about 30 kJ mol{sup -1} above the separated reactants; the overall reaction to form D5-diphenyl from phenyl and D6-benzene was found to be weakly exoergic. The explicit identification of the D5-biphenyl molecules suggests that in high temperature combustion flames, a diphenyl molecule can be formed via a single collision event between a phenyl radical and a benzene molecule.

74 ATOMIC AND MOLECULAR PHYSICS↗

Experimental observation of carbon dioxide reduction in exhaust gas from hydrocarbon fuel burning

A high-negative voltage at the cathode initiates a dark discharge, resulting in a reduction of the carbon dioxide concentration in exhaust gas from the burning of hydrocarbon fuel. An experiment indicated that nearly 44% of the carbon dioxide in exhaust gas disappears after a high-voltage application to the cathode. The energy needed for the endothermic reaction of the carbon dioxide dissociation corresponding to this concentration reduction is provided mainly by the internal energy reduction of the discharge gas, which is nearly 20 times the electrical energy for electron emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Experimental Investigation on Effect of Smoke Management System in a High-large Atrium

In an atrium measured 120 m by 180 m by 36.5 m high, fire tests were conducted under 'natural filling' and 'mechanical exhaust' conditions by hot smoke test method. The fire size was 8 MW released by an ethanol pool of 3.6 m in diameter. The distribution of vertical temperature profiles above the fire source and the gas layer temperatures were measured. From these measurements, it was shown that the fans successfully exhausted hot smoke to control descending of hot smoke layer and temperature rising rate. The hot smoke layer can be maintained at about 30 m which was almost 2 times of hot layer height in 'natural filling' condition. The temperature risings in both conditions were too low to cause thermal damage to the structure, only 18.6 K and 12 K. The centerline temperature above the fire source and the height of hot smoke layer were calculated using the plume models. The calculated results agreed well with the conclusions obtained from the experiment results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis and physicochemical properties of epoxidized Tmp trioleate by in situ method

Tmp trioleate was initially synthesized via esterification of trimetilolprapane and oleic acid (90%) using 1.5% of H{sub 2}SO{sub 4} as a catalyst. The production of Tmp trioleate was observed at 98% (w/w). The iodine value of Tmp trioleate was analyzed for further reaction of epoxidation. Epoxide was important reaction as an intermediate for preparation of chemical modified lubricants from vegetable oils. Finding the best way of epoxidation process will give high quality for further modification of oil instead of reduce the cost and time for the preparation process during reaction of epoxidation. In this study, the epoxidation of unsaturation Tmp trioleate with peroxyformic acid generated in-situ from hydrogen peroxide 30% in H{sub 2}O{sub 2} with formic acid was studied. 95% conversion to oxygen oxirane content (OOC) ring was obtained. The derivatization showed an improvement of the compound's oxidative stability evidenced from pressurized differential scanning calorimetry (PDSC) data which are 177°C to 200°C. Physicochemical properties showed increasing of temperature of flash point from 280°C to 300°C and viscosity index (VI) from 146 to 154. However, the pour point showed increasing temperature which was −58.81°C to −17.32°C. From the data obtained, these derivatives have shown better performance of lubricity properties. Overall, the data indicates that these performances are compatible to the commercial lubricants.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical filtering and luminescence property of some molybdates prepared by combustion synthesis

As an important class of lanthanide inorganic compounds, rare earth ions doped molybdates have gained much attention due to their attractive luminescence and structural properties, supporting various promising applications as phosphor materials in the fields such as white light-emitting diodes, optical fibers, biolabel, lasers, and so on. The molybdate family has promising trivalent cation conducting properties and most of the optical properties result from electron transitions of the 4f shell, which are greatly affected by the composition and structures of rare-earth compounds. In this paper we report the molybdate CaMoO{sub 4}:Eu{sup 3+} for red SSL and Bi{sub 1.4}Y{sub 0.6}MoO{sub 6}, Y{sub 6}MoO{sub 12} for optical filtering, prepared by one step combustion synthesis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparative study of active plasma lenses in high-quality electron accelerator transport lines

Electrically discharged active plasma lenses (APLs) are actively pursued in compact high-brightness plasma-based accelerators due to their high-gradient, tunable, and radially symmetric focusing properties. In this paper, the APL is experimentally compared with a conventional quadrupole triplet, highlighting the favorable reduction in the energy dependence (chromaticity) in the transport line. Through transport simulations, it is explored how the non-uniform radial discharge current distribution leads to beam-integrated emittance degradation and a charge density reduction at focus. However, positioning an aperture at the APL entrance will significantly reduce emittance degradation without additional loss of charge in the high-quality core of the beam. An analytical model is presented that estimates the emittance degradation from a short beam driving a longitudinally varying wakefield in the APL. Finally, optimizing laser plasma accelerator operation is discussed where emittance degradation from the non-uniform discharge current (favoring small beams inside the APL) and wakefield effects (favoring larger beam sizes) is minimized.

43 PARTICLE ACCELERATORS↗

Coherent microwave scattering from resonance enhanced multi-photon ionization (Radar REMPI): A review

Coherent microwave scattering from laser-induced plasmas, including weakly ionized plasma, laser sparks, Multiphoton Ionization (MPI), and Resonance Enhanced Multi-Photon Ionizations (Radar REMPI) has achieved much successes in plasma, reactive and nonreactive flow diagnostics. Under illumination of microwaves (Radar), electrons inside the laser-induced plasma oscillate with the electric field of the microwave and re-radiate from the electrons forming coherent scattering. In the far-field approximation, the microwave scattering from the small volume plasma reflects the generation and evolution of unbounded electrons inside the plasma, when the microwave wavelength is much greater than the size of the plasma and the skin layer depth at the microwave frequency is larger than the size of the plasma. Laser excitation schemes, microwave detection methods, calibration of microwave scattering, and the novel applications of the technique have been significantly expanded and improved. Furthermore, this review paper summarizes physical principles, various REMPI excitation schemes for atomic and molecular species, and temperature measurements in plasma and reactive flows. Discussions on new research directions and applications are given at the end.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In silico discovery of metal-organic frameworks for precombustion CO 2 capture using a genetic algorithm

Discovery of new adsorbent materials with a high CO 2 working capacity could help reduce CO 2 emissions from newly commissioned power plants using precombustion carbon capture. High-throughput computational screening efforts can accelerate the discovery of new adsorbents but sometimes require significant computational resources to explore the large space of possible materials. Here in this paper we report the in silico discovery of high-performing adsorbents for precombustion CO 2 capture by applying a genetic algorithm to efficiently search a large database of metal-organic frameworks (MOFs) for top candidates. High-performing MOFs identified from the in silico search were synthesized and activated and show a high CO 2 working capacity and a high CO 2 /H 2 selectivity. One of the synthesized MOFs shows a higher CO 2 working capacity than any MOF reported in the literature under the operating conditions investigated here.

36 MATERIALS SCIENCE↗

Charged Species Concentration in Combusting Mixtures Using Equilibrium Chemistry

Ionization in flames is of interest in the design and development of modern combustion devices. The identity and concentration of various charged species in reacting mixtures can play an important role in the diagnostics and control of such devices. Simplified chemistry computations that provide good estimates of ionic species in complex flow-fields can be used to model turbulent reacting flows in various combustion devices, greatly reducing the required computational resources for design and development studies. A critical assessment of the use of the equilibrium chemistry method to compute charged species concentration in combusting mixtures under various temperatures, pressures, and thermal disequilibrium conditions is presented. The use of equilibrium chemistry to compute charged species concentrations in propane-air mixtures performed by Calcote and King has been extended. A more accurate computational methodology that includes the effect of negative ions, chemi-ions (H 3 O + and CHO + ), and thermal nonequilibrium was investigated to evaluate the suitability of equilibrium computations for estimating charged species concentrations in reacting mixtures. The results show that equilibrium computations which include the effects of H 3 O + and elevated electron temperatures can indeed explain the levels of ion concentrations observed in laboratory flame experiments under lean and near-stoichiometric conditions. Furthermore, under engine-like conditions at higher temperatures and pressures, equilibrium computations can be used to obtain useful estimates of charged species concentrations in modern combustion devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗